Cost error in rem
HI expert there is following bewol error occure every month end activites in costing product cost collector.There is one error "No reporting point but i have mention in rouing as milestone confirmation
The errors came back this month end (as expected)
Cost Object Plant RAVn Msg.typ AppAr MsgNo Message Text
0074333308000/10000/100767878 1000 0 E RM 208 No reporting point found that suits the selection
0074333308-000/10000/100767878 10000 0 E KV 191 Cannot calculate work in process at target costs
0074333308-000/10000/100767878 10000 0 E KJ 276 No WIP at target costs could be calculated
plz give any solution.
Maybe, the cost is not occurred in the cost collector which have error message this
Month.
You check the cost collectoru2019s cost this month.
If the cost collector have cost, you check whether cost collectoru2019s routing is equal
to material versionu2019s routing.
If cost collectoru2019s routing is not equal to versionu2019s routing,
You should fix versionu2019s routing.
Edited by: CHOI SU YOUNG on Oct 5, 2011 4:16 AM
Similar Messages
-
Bacgflush error: Change REM profile
Hi Gurus,
I have tried to backflush a part number. I get this error:
'Changed REM Profile regarding generation of postprocessing records'.
From my knowledge we didn't chnge the REM profile and product cost collecter is also avilable.
Please help to resolve the error.
Thank you.
NaveenDear Naveen,
Check whether did you make any config changes in the REM profile in OSP2 or else assigned some other REM profile which
allows reprocessing.
In my understanding if already some reprocessing exists for that material in MF47,and if you try to change the REM profile and
try to backflush,this will give this error.
Check and correct me if i 'm wrong.
Regards
Mangalraj.S -
Sales Order costing error to prevent Plan Order generation in MRP run
Dear PP Experts,
We are into sales order costing due to Variant Config implementation.
Problem Statement: After sales order entry /Characterisitc value selection, while saving sales order , SO costing is auto triggered. Many a times one of the new Raw material price is not maintained( Purchase info record), hence SO costing occurs. SO costing is still saved, SO incompletion is not configured , so it is detected when Production order has 'No Target Cost'. This creates inconsistancy in FI postings.
My questions
- Can we set SO imcompletion for SO costing error( Standard Config?)
- Is there a enhancement to prevent MRP from processing Sales order with incompletion log i.e. Prevent MRP from generating Plan Order.
Best Regards,
JatinHello Jatin
You can use BAdI MD_CHANGE_MRP_DATA to make the sales order not relevant to MRP.
Check the following document for an overview of the BAdIs available on MRP:
BAdIs for MRP
BR
Caetano -
Sales Order Costing Error Log Display
When I look at Sales Order costing thru VA03 or when I run the Multi-level BOM costing for sales order CK87_99 I can not display the costing error log. I can generate the log thru VA02, but we need to limit the Sales Order change transaction to the Order Management group and did not want to give change order access to the product cost group.
Any options to get the costing error log from VA03?
ThanksI cheeked OKY9 and the Update tab had the "Save Error Log" checked, but on the Misc tab the "Log Messages but do not save" on the error message field was selected. When I changed the selection to "Log and Save Message" this corrected my problem.
Your suggestion guided me in the right direction. Thanks, -
Hallo friends,
I am getting sales order costing error and it does not allow us to delivery through VL01n. Error shows :
Object was not costed
Message no. CK060
Diagnosis
The system could not find any entries that are relevant to costing.
System Response
The system did not cost the object.
Procedure
Check whether the following objects should be flagged as relevant to costing:
Items in the BOM
Display BOM
Operations in the routing
Control key in the routing
1. Look at the message log.
2. Check whether a quantity was specified in the confirmation.
Kindly give me urgent solution.
Thanks & regards,
SamratHi
You can just mark your thread as answered
regards -
HI..
During saving a confirmation in CO11 , i m getting costing errors as
1. Substitution was deactivated for account determination.
2. Company code clearing account for 11111 2BP01 is not defined
3. Posting key is not defined.
4. No account type has been specified for posting key
BP01 is my controlling area.
what is setting i have to do, to come out of this ??
Thnks in advanceDear,
Please check OSS NOte 201820. I hope you are missing customization
Also check T.code OB41...to see whether the PK is there.
Check what company code assigned .
check these
BAPI_SALESORDER_CREATEFROMDAT2 configuration
Also check if the given company code exist in the system at path below.
SPRO --> Enterprise Structure --> Definition --> Financial Accounting --> Edit, Copy, Delete, Check Company Code --> On the popup screen select " Edit Company Code Data", then see if your company code 'XXXX' exist.
Regards,
R.Brahmankar -
Costing errors at the time of creating and confirming production order
Hi friends,
I'm in the process of setting up a controlling activity called assembly of a product (this assembly is final assembly or would result in the finished product, JOTRUCK).
The Issue that I'm facing is, the system is not capturing costs.
i.e., it is allowing the creation and confirmation of production orders, however with a warning message which says costing errors.
Steps that I've completed (from controlling end):
1. defined primary cost elements
2. defined secondary cost elements with category 43.
3. defined a cost center.
4. In OKB9 I've assigned a couple of cost elements.
Please notify if there are any more steps that I need to configure for getting the right results.
If you have any material possibly with screen shots, pls do forward the same to: [email protected]
Regards
KimHi,
I hope you have carried out the following activities:
1. Carry out standard cost estimate for the materials involved.
2. Check KKPAN to see the cost details of the product.
Need more details on the steps that you have carried out so far.
Regards,
SGP.
P.S - assign points incase the info was useful. -
Costing Error in Production Order
Hi
I am facing costing error in production order, so I checked the corresponding sales order and checked the costing it gives the error message.
No itemization available for the corresponding material on the plant.
Note: I checked the sales order its not pulling the routing for the material [Configurable] can you tell me please how to link with sales order.
Thanks in Advance.Hi
If you are creating first time production order for the material using standard price you have to do standard cost estimate using ck11n
In that screen you have to enter material no.. costing variant mostly PPC1, In the next tab page costing dates from and to and execute..Here only system asks for Itemisation.. Just press enter.
After that Update standard price using ck24
mark and release your standard price for the materail..
Reward points if useful..
Regards,
MSH -
PP order created inspite of costing error
Dear Experts,
When I create a production order using CO01, while saving it gives me a message saying there was a costing error .
If I check the costing log , the material does not have accounting view created in material master and message type is error.
But still I am able to save the production order. My requirement is , if there is a costing error, order should not be created.
Can you please advice a solution.
Thanks,
Appshi
check is there any user exit available if so apply you logic and activate it -
Sales order costing error found in quotation 2 order line items created in
Sales order costing error found in quotation 2 order line items created in quotation 5000562
1st line item with third party
2nd line item with PTO
Purchase price was entered in the configuration screen
1st item : 2,000 EUR
2nd item: 1,200 EUR
Purchasing info record was created with variant condition for EUR
Error in sales order costing:-
System does not take the purchase price in the configuration screen to
calculate sales order costing. It incorrectly took 1 EUR from variant
condition in sales order costing for both items.
By right, it should take purchase price from configuration screen.
Pls advise
Thanksno replies and my thread was dead.
-
Shipment cost error: G/L account ## cannot be used (ME045)
In creating a shipment cost, Error is received indicating the account can not be used. The same account is good with different sales org. Was working previously and I don't know what was changed.
Account is a freight account. This is involved with COPA.
Where should I look?The transaction did assist, however, because the account is freight related, it wasn't even found in the list.
The client was overlayed with another that was working and it is now working. We now move on to determine what caused the problem at another time.
Thank you for taking the time to respond. -
Reason for Actual Cost Error in Production Order
Hi,
I have Convert the planned order to Production order but error message coming "Actual Cost Error".
what procedure that error avoid.
plz, Advise me.
By,
Jeevan.SHi
1.problem could be with the activity type costing.
check KP26 data maintained or not (for activity and costcentre assigned to work cneter)
2.IF order having CSER status then do the cost caliculation in the order, so that the status will go.(do thsi after correcting the KP26 data)
if still facing check the error
-ashok -
Sales order prod costing error and extracting the cost $ value
We are doing sales order product costing via custom program which internally calls FM CKKA_Costing_Process, CK_F_SD_ORDER_CALC and all other std processes and calculates the cost. In the event of error, the calculated dollar value is getting cleared. Is there any way we can find and extract the cost $ value in case of costing error?
Owen,
That's fine. Not worried about the error. But business needs the cost calculated with the error. Is there anyway we can get the cost $ while error. VA02 costing returns error too, but we have the cost updated.
Regards
Gopi -
Dear All,
I am getting an error at the time of release of prodn order CSER i.e. system is giving planned cost calculation error.Pls. help in this regard.
r sehgalHi
What COSTING errors you are getting.,Please go to menu
Goto->Logs->cost calculation..
and send the error message,, so that we can reply specifically..
Regards,
MSH -
Error while creating product cost collector in REM ?
HI, all SAP expert,
I have to run repetitive manufacturing .
I create work center of category production line and use in rate routing of semifinished material.
In mm02 -- mrp 4 view of semifinished material , i select rem profile , production version.
Now I create product cost collector ( t-code kkf6n) for semi. material by giving order type (yrem), production version after enter it shows error
Error in number management (notify your system administrator)
in help it shows
Error in number management (notify your system administrator)
Message no. KO162
Diagnosis
A system error occurred in the number management.
Procedure
Please contact your systems analyst or the SAP hotline.
Edited by: Nitin Nerkar on Sep 30, 2009 12:16 PMDear Nitin,
Check whether is the number range maintained properly for the order type RM01,check the config setting in T Code
KOT2_PKOSA.
This is related to CO Module.
Check and revert back.
Regards
Mangalraj.S
Maybe you are looking for
-
I uninstalled my newest version of iTunes for Windows
Hello my name is Wendy Reddy, and I got my iPod nano Model No. A1320 a couple years ago. My computer crashed and I backed up the entire iTunes library and was able to restore it to my computer after I got it running again. However i had to reinstal i
-
Flickering horizontal white stripes on screen
Full Apple Hardware Test passed. Power Management Unit PMU is reset. White horizontal stripes covering the picture appear sporadically. Sometimes entire screen gets white and returns to normal after a while. Sometimes entire screen is covered with ve
-
any function module for fbl5n.( customer line items display) keshav
-
Hi, I registered a site for a client before their DNS was pointing to their site (IP based) and now have reregistered it with the domain name. How do I unregister the first IP-based one I set up? I couldn't find this option anyway in the ICE admin. T
-
Since I installed iOS 7 the battery drains 10 percent faster than before. How do I fix this? And is there someway to turn off the feature that makes the background wallpaper moves since it makes me sick and nacious. Feeling that iOS 7 is a flop. Firs