Cost price Problem for repair FG.

hi,
Business scierio-
Mat "A' Done GR aginst Production order, Now the Same FG undergone the repair, we use to do Creating New FG Mat "B" and making old FG (mat "A") as a component of Mat "B" .
Note- for every FG we having the BOM (universal).
Now the Problem is- Components used in Mat "A" having Valution is MAP (CP), but the FG Valuation is Standard price (Selling Price).
During issue of Mat "A" to floor the selling price get updating in the cost price GL account During repair process.
What should i do to get the actual Cost price for Mat B.
Is it require to change the valuation of the Old FG i,e Mat "A" in to actual Cost Price before issuing to floor?
Waiting for reply
Veera.

While creating cost estimate with Qty Structure, first BOM is exploded by the system & prices are picked up from material master as per this sequence.
Ideally, the 1st preference should  be - valuation according to price control in MM.
so that if a material is valued at MAP, it's MAP will be picked up for costing & if valued at Std Price, it's std price will be picked up.
In your case 1st it will check for Planned Price 1. If the system finds a value in the Planned price 1 field (costing view), this value is taken as the value for valuating the material & so on.
Regards,
Amol

Similar Messages

  • Reversal of Cost Price Update and Price Change MR21

    Dear SAP experts
    Recently (on 1st of this month) i did cost price update for all my FIG items. Later i realized that some of FG items cost price was not accurate. So i want to delete cost price of those items and update price by using T code MR 21 
    When i try to cancel these items cost price by using T code CKR1, i am getting error message that particular material current or future standard price is avialable and i am unable to move further
    Please guide how to delete current cost price of these items and update cost price by using MR21. Please note these items does not have any BOM and basically are contract manufacturing items
    Thanks in advance

    Hi Vedsai
    When you use CKR1, it does not give error.. It just gives a warning message
    Enter your Plant / Mat in CKr1 and select "Current cost estimate" or "Future Cost Estimate" as the case may be
    If any warning comes, ignore it and press enter.... It should reverse the cost estimate
    Now update from MR21 or preferably use CK11N again
    Note: If at all it gives any error in CKR1, check in T code OPR4_CK if this msg can be converted into warning message
    Regards
    Ajay M

  • My brother purchased new ipad 4, 5 days ago and the sim tray stuck very first day. I gave it to jaipur service centre for repair and they are asking for 20000 Rs (price of ipad mini for just sim tray repair). What should i do?

    Dear All,
    My brother just purchased an ipad4, 5 days ago and the very first day sim tray stuck. When i sent it to jaipur (rajasthan) service centre, they asked Rs 20,000 for repair and issuing new tray. This is the cost of new ipad mini, and they are giving me just one tray. It is also approx. half of the price of new ipad4. Even the new ipad is just 5 days old and should be repaired for free. If not free, is Rs 20,000 is fair?
    Please tell me what should i do?
    Thanks!
    [email protected]

    If the service center determined that the SIM socket was damaged by your brother, as would appear to be the case, and not due to a factory defect, they will charge for replacing the entire iPad, not just for the SIM tray. Apple at this time replaces the iPad for just about any problem, and charges a flat fee for doing so.
    If this service center is one authorized by Apple, your brother can try calling Apple Support India at (91) 1800 4250 744 and discussing the situation with them. Ultimately, though, it is the technician's judgement as to what caused the problem, and Apple will usually take the word of the technician when it comes to determination of user-caused damage.
    Regards.

  • T400 - Video problems and a long wait for repair...

    Hi,
    I'd just like to state my experience with Lenovo Customer Support for a video problem with my T400.  Bottom line, as of today, it's been around 27 business days that it's been with Lenovo, and 41 days total since it's failed on me, and nobody, including Lenovo Customer Support, seems to know what its status is exactly, except that they're waiting on a part which has no ETA.
    In July 2009, I bought a T400, a 2764CTO version with the switchable graphics between the internal intel graphics and the ATI GPU.
    All was well until February 1st, 2010, when the LCD sudden wouldn't work.  Well, it would work, but the screen was very very dim, even with the display maxed out on brightness.  You would have literally bring your nose to the screen in order to even make out any text or images - definitely unusable.  However, if you hooked up an external monitor via the video output, the T400 would display video output properly that way.  When I did this, I noticed that the switchable graphics option wasn't there any more - couldn't switch to the ATI GPU.  Based on this, I figured it must be a video card or LCD issue, or a combination of both.
    So, I called Lenovo Customer Support (CS) at 1-800-565-3344, since I'm up here in Canada, and I initially was issued a case number of 41JRFSD, and I agreed to send it to a local Lenovo Repair Centre.  Oops, my bad, I made a mistake using the locator tool I was told to use at bplocator.lenovo.com, and thought the Centre was relatively close.  Not quite.  So, I called Lenovo CS again, and they issued me with a new case number, 40KWSYF, and said they'd send a box for return to depot.  And within 2 days, Feb 2nd or 3rd, I got a Purolator courier return box.  That's fast service!  Pleased, I put my T400 in according to instructions, and I sent it off.
    Fast forward to about mid-February.  I called Lenovo CS, and apparently there was a delay - the depot needed a part that wasn't in stock. Fine, I know these things can happen - I'll wait.
    Fast forward to March 1st.  I talk to a Lenovo CS rep, and it appears that the part needed has arrived, and they've put a rush order to get the computer back to me. Great!
    Fast forward to March 8th, still no computer.  I talk to another Lenovo CS rep... strange, there's no update.  The issue gets escalated to the Depot managers.
    Fast forward to March 12th.  Still no word on my T400's status.  An email fron CS has been sent to the depot.  Not even the CS reps know what's going on.  The rep I talk to figures there should be a response by the end of the day.
    Fast forward to today, March 13th, 4:50pm Pacific Time.  I just finish talking to Lenovo CS, there's been no response from the depot.  Apparently there's a part that they're waiting on for repairs, but there's no ETA on it.  Is it the same part that I've waiting on all this time?  Is it a new one?  I don't know. 
    At this point, I've been told to send an email explaining my situation, and I've also been told to talk to Scott the next time I call CS on Monday after 3pm Eastern.  I have to stress that the Lenovo Customer Support Reps I've talked to have all been very sympathetic and have been courteous, helpful, and professional - something I appreciate from having worked in Customer Support myself.  But the bottom line remains: my computer's not back to me.
    So, my questions to the community here: is my experience here typical?  Is there any hope of my seeing my computer back, or even at least just the hard drive?  I've used Lenovo computers for work for the past 7 years, and it was my good work experiences that led me to buying a Lenovo for home use.  However, it's been a while since I've been without my T400, and I was hoping to get my taxes done on the computer too, since they're due at the end of March.  I'll reserve judgement on Lenovo until I get my computer back, but at this point, all I can say is... I'm disappointed.
    If you're reading this, I'll let you judge my experience for youself.  I'll update my case as it progresses. 
    Thanks!
    Moderator edit: Removed support contact private information, per the Community Rules.

    Hi all,
    So, an update with some good news: my computer is finally back!  
    After a total of over 40 business days (just over 2 months) I finally have my T400 back at home, working again!
    According to the spec sheets, the repair depot had to replace: the systemboard/planar, display/LCD panel, LCD cable, PC card, bluetooth, and the inverter.  BIOS/Embedded controller was also updated, along with the regular diagnostics to ensure everything was working properly.
    I give Lenovo credit though: they got the final parts to repair the computer on Monday, April 5th, and shipped my computer back to me for the next day (today, April 6th).  That's fast service, once repaired!
    However, my case spans over 4 screens of updates and repair depot orders of parts.
    Also, it took me over 10 calls to Lenovo's Customer Service, plus an escalation to a higher-level manager after 1 month had passed, to get progress updates and ETAs for repair.
    Lenovo called me only once to give me an update, and that was the manager whom my issue was escalated to: all the other times, I called Lenovo for an update.
    The story doesn't end here, however:
    In talking to Customer Support, they told me that Sales might be able to sell me an extended warranty at a discount, given the issues I had.  And indeed, after talking to Sales, they offered me a 1 year warranty extension at a price of just over $100 CDN, plus tax.  This is a sale price, compared to the regular retail of $129.  Unfortunately, they can't sell me just one month.
    At this point, I refused their offer, and again escalated to a manager to request an extension of exactly 1 month on my existing warranty.  I figure 1 month delay in repairs, that's plausible - crap happens, and while most repairs take 5-10 business days, I can understand it can sometimes go higher.  Two months though....  My request for a warranty extension is being considered by the manager it was escalated to.
    So, one last question for you folks reading this: am I being unreasonable, talking to Lenovo support one more time to request a 1 month extension of my warranty, given the length of time it's taken for repairs?  I'll post the response Lenovo will give me tomorrow, as they've said they'll do.
    One thing for sure: Lenovo's response will definitely influence my choice of brand from whom to buy a new computer (and it will influence the choice of my friends who've heard my issues, and maybe yours too).  My particular repair problem may not come up often, but if it does happen to you, I'd be happy to know of your experience.
    Thanks for sticking with me through the drama!

  • Cost Price for Returns order adopting cost from preceding billing doc

    Hi Forum Experts,
    Our Returns Order (SO) currently obtains cost price (VPRS) based on material moving average price.
    However, what we really need is to copy the cost price from the preceding Billing Document.
    I've explored using VOFM and created a routine under (Formulas --> Condition Value) as per below.
    I found that while the debugger steps through this code, the value of the cost gets copied from the preceding document.
    However, immediately after the code finishes execution, the value gets resetted back to the material moving average price again.
    What can I do do let the system keep the copied cost price from the preceding document instead?
    FORM FRM_KONDI_WERT_998.
    DATA: lv_kbetr TYPE kbetr,
          ls_vbfa  TYPE vbfa,
          lv_knumv TYPE knumv.
    IF SY-TCODE = 'VA01' OR SY-TCODE = 'VA02' OR
           SY-TCODE = 'VA21' OR SY-TCODE = 'VA22'.
    IF xkomv-kschl EQ 'VPRS'.
    Get billing doc and position
    SELECT SINGLE vbelv posnv
    INTO corresponding fields of ls_vbfa
    FROM vbfa
    WHERE vbeln EQ komp-aubel "returns order number
    AND posnn EQ komp-aupos "returns order item
    AND vbtyp_n EQ 'H' "returns order
    AND vbtyp_v EQ 'M'. "invoice
    IF sy-subrc EQ 0.
    Get billing doc conditions key
    SELECT SINGLE knumv
    INTO lv_knumv
    FROM vbrk
    WHERE vbeln EQ ls_vbfa-vbelv.
    IF sy-subrc EQ 0.
    Get moving average price from billing doc conditions
    SELECT SINGLE kbetr
    INTO lv_kbetr
    FROM konv
    WHERE knumv EQ lv_knumv
    AND kposn EQ ls_vbfa-posnv
    AND kschl EQ 'VPRS'.
    IF sy-subrc EQ 0.
    Recalculate condition values
    xkomv-kbetr = lv_kbetr.
    xkomv-kwert = lv_kbetr.
    xkwert = xkomv-kwert.
    ENDIF.
    ENDIF.
    ENDIF.
    ENDIF.
    ENDIF.
    ENDFORM.
    Regards,
    Edric

    Hi,
    If you bring the Freight condition after PBXX and include in the net value, your problem will be solved.  so it will be 120 in MIGO, MIRO, Dellivery and VPRS in billing.
    We have the same situation and its working fine for us. 
    Thanks
    Krishna.

  • Transfer cost price from free of charge item to main item but not for VPRS

    Hi,
    I want to transfer cost price from free of charge item to main item but not for VPRS but for a new Z contidion type.
    For CO-PA proposes. Can you help me with This?
    Catarina Alves

    hi,
    transfer of cost from sub item to main item is configured in the delivery to billing copy control for the main item. go to VTFL  > select the required item cateogry > here at the bottom you will find a check box Cummulate cost. Tick it.
    Not really what you meant COPA purposes. But the pricing conditions are mapped to COPA value fields at KE4I transaction.
    regards
    sadhu kishore

  • I sent my iPod Touch for repair, but it still has the same problems as when I sent it off. Help?

    It started when my ipod suddenly stopped playing music. After I contacted support and tried just about every way to get my ipod fixed, I was eventually set up to have it shipped to apple for repairs. After two days, my ipod has returned with papers saying that the technicians at apple were unable to find anything wrong with it. The only problem is that it is still behaving the same way as it was before I sent it off, even though nothing was found to be wrong. My music still does not play and my apps will not sync. I decided to give a restore in recovery mode another shot, just to see if it would work, but the restore still only goes so far before the bar completely stops moving. Now, my ipod won't restore or come out of recovery mode, and I'm getting desperate. I thought having it sent off would fix all my problems, but nothing has changed. Please, can anyone help me? I don't know what to do anymore...

    - Try DFU mode and then restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Next try restoring on another computer
    - Last, make an appointment at the Genius Bar of an Apple store. That way you can demonstrate the problem.
      Apple Retail Store - Genius Bar

  • I bought a Iphone 4S in Colombia two months ago, It never work properly, I cant put turn it on.  When I went to Movistar they told me that it was a problem with the software.  Now, they have the Iphone for repair.

    I bought a Iphone 4S in Colombia two months ago, It never worked properly, I cant put turn it on.  When I went to Movistar they told me that it was a problem with the software.  Now, they have the Iphone for repair at Movistar.  The questios is, If I bought a NEW Iphone why they gave me a Iphone with this problem.  I asked about the warranty but they told me that Apple doesn't respond.  Please tell me something.  The IMEI is: 013071008363505 is a Iphone 4S  16GB.  Black.

    I would guess the fan is the cause of the noise. Suggest you take a look at it.
    This site has a wealth of information about getting inside a Macbook or Macbook Pro.
    http://www.powerbookmedic.com/mac-repair.php

  • I had bought iphone 4 from singapore and now i am relocated to india.....there is some hardware problem in the phone due to which i m nt able to use it.....how do i give the phone for repair and in which country?

    i had bought iphone 4 from singapore and now i am relocated to india.....there is some hardware problem in the phone due to which i m nt able to use it.....how do i give the phone for repair and in which country?

    The warranty is not international and only available in the Country of purchase .If the iPhone is out of warranty  Apple or their Agents will also only give service in the country of original purchase.
    So if you want Apple help you will have to return it to Singapore or find a 3rd party to repair it if they can in India  as long as it is out of warranty and you understand that Apple would never help with that device in future if it has been opened by a 3rd party

  • How to change price total for "Change Unit Cost Estimate Screen" for KKE1 Tcode ?

    There is a requirement of bringing the Material Price in KKE1 while entering the Item Catogory M ( M for Material) from the Gross Price in the condition type (P001) that is entered in the Purchase order.Currently systems brings the material value from MAP(Moving average Price) in the Material Master data.
    I have looked into the user exit 1) EXIT_SAPLKKEC_001 2) EXIT_SAPLKKEC_002  available in this T code KKE1.When I put break-point in these user-exit,it is not going in debugging mode while fetching the price value in Price total column  for "Change Unit Cost Estimate" screen in KKE1.
    How will change pricing condition for material in KKE1?
    I want to change price condition for material  as marked in red as shown in the screen-shot.
      Where will write the code such that I will bring Price Total based on material number as shown in the image?

    Hi Ram,
    I think you can do the same in thei manner.
    Go to program SAPMV45A.
    use menu GOTO -
    > Text Elements----
    >Text Symbols
    Here make change of Text-002 Sold-To Party as saleable .
    Regards,
    Pravin

  • My home button is not working sometimes and at the store they dont want to take it for repair because the problem did not show up at that time

    My home button is not working sometimes and at the store they dont want to take it for repair because the problem did not show up at that time

    When normally powering the phone, there would not be a loading bar, you would just see the Apple logo. You can try a reset of the phone, hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot.
    You can take the phone to Apple, by making an appointment at the Genius Bar to have the hardware checked. Apple handles warranty and post-warranty issues, not Verizon. Have Apple look at the hardware to see if there are any problems.

  • Copying control for cost price

    Dear All,
    I have created one new service document.And after few steps the system will automatically creates a subsequent document with reference to Original order.
    The issue i am facing is that,The system is not able to copy the values of cost price for a particular item in my subsequent document(Although the cost price is appearing for that particular item in my original document)
    Please help me to resolve my above issue...
    Thanks

    i wants to close this thread

  • Relevant for Costing - Price Update

    Hi,
    SAP standard is offering Price Update for Inventory Costing through 'Relevant for Costing' against which price factors (50%, 75%, 25% etc.) is maintained.
    1. We would like to use this to devalue the inventory values on a particular basis. What transaction do I need to execute to devalue.
    2. I am using one material in BOM for SFG/FG, wherein I am entering the "Relevant for Costing' key. (50%). However, I am not able to see the result. The consumption is getting posted @ 100% rate and the cost of RM in FG is also 100%. It should have been 50% as per my understanding.
    Am I missing any link. Please guide me to resolve this issue.

    Hi Swapvik,
    Pls check in your Costing Variant--> Valuation Variant --> Price Factors..
    Here, Costing Relevancy is "X" for which you need to maintain your Price Factors. Pls check your entry and let me know..
    Srikanth Munnaluri

  • Hi does apple issue you a replacement phone at cost price even if u hav lost ur pin code and cannot get into ur phone?iv broke my phone and was told apple giv u a new 1 for uk £179?thanks

    Hi does apple issue a replacement phone for cost price even if u cannot get into ur phone because u hav lost ur pass code?

    Whether your phone is locked with a passcode or not won't matter. If eligible for an out of warranty replacement, you can do such a replacement,

  • I brought iphone 5s to local i centre in Armenia, they opened the phone and said that they can't solve the problem, is it possible to send it to US for repair ?

    I brought iphone 5s to local i centre in Armenia, they opened the phone and said that they can't solve the problem, is it possible to send it to US for repair ?

    If some unauthorized shop opened the iPhone and attempted a repair, then Apple will no longer touch the iPhone. If they didn't attempt repairs, then Apple might be willing to service it, but only in the country in which the iPhone was originally sold. If that was in the US, then you will need to take the iPhone there yourself, or you will need to send the iPhone to someone you know in the US who can take or send it to Apple for service and then send it back to you. Apple will not accept shipments from outside the country.
    Regards.

Maybe you are looking for