Cost sheet for the over head caluculation

Dear guys,
i need configure the cost sheet
Rawmaterial is 10 rs
activitity cost is 2 rs
i need to caluculate the 12 rs 30% overhead caluculation
system caluculates the 10 rs only not 12 rs
i configured the cost sheet
10 th row rawmaterial
11 cutting
12 toal cutting    from to
                             11 11
13 cutting overhead 12      creit i enter 30%
give me solution
with regards
Sriinivas

rsolved my self

Similar Messages

Logic for cost sheet for Csost estimation

Hi all,
Can any one explain me what is the logic and how cost getting captured in the cost sheet.
when i run KKF6N...how does and from where does the system get the value and when i save the cost estimation how & where it goes and update....
If any one can provide me details along with some examples will be very much helpfull ....
Ur help is very much appreciated
Regards
SAP4ME

Hi,
You use overhead calculation to allocate overhead through percentage-based or quantity-based overhead rates. The basis for the allocation is the primary cost elements that you posted as overhead costs. In the manufacturing industry, for example, these are usually the labor and material costs.
To perform an overhead costing, you need to define control data during Customizing and include this in a Costing Sheet. The Costing Sheet combines all parts of the overhead costing and determines the rules for calculating the values to be posted. The Costing Sheet is comprised of a Calculation Base, Overhead Rate, and Credits. The Calculation Base defines the primary cost elements to which a particular overhead is to be applied. The Overhead Rate determines to what extent the percentage-based or quantity-based overhead rate should be applied to the direct costs. It also specifies under which conditions (dependencies) the overhead rate is to be applied. For example, you can calculate a defined overhead rate for each plant by specifying a plant dependency. The Credit specifies the credit object and the credit cost element. When overhead is applied to an order in the actual, another object is credited at the same time (such as a cost center or another order). You allocate the overhead using a special overhead secondary cost element (category 41).
You can apply overhead to both plan and actual costs, or based on commitment data. Additionally, overhead may be applied to many orders simultaneously using a collective processing.
Use this transaction to apply actual overhead all orders for a plant or all plants.
Thanks,
Rau

[svn] 1751: Bug: BLZ-174 - MessageClient.testMessage() is incorrectly doing a string compare for the subtopic header of an inbound message against the subtopic value (which may contain wildcards) that the Consumer is using.

Revision: 1751
Author: [email protected]
Date: 2008-05-15 14:21:43 -0700 (Thu, 15 May 2008)
Log Message:
Bug: BLZ-174 - MessageClient.testMessage() is incorrectly doing a string compare for the subtopic header of an inbound message against the subtopic value (which may contain wildcards) that the Consumer is using.
QA: No - customer verified the fix.
Doc: No
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-174
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/MessageClient.java
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/services/MessageService.java

If you create a metadatatype with a single metdata block, and you reference that in your vm/cm cell attribute using a *one* based index, Excel seems to see the link and it honors it when saving the spreadsheet.
So, I ended up with something like:
<c ... cm="1"/> (I'm dealing with cell metadata, but the concept is equivalente to value metadata)
<metadataTypes count="1">
  <metadataType name="MyMetaType" .../>
</metadataTypes>
<futureMetadata count="1" name="MyMetaType">
  <bk>
    <extLst><ext
uri="http://example" xmlns:x="http://example"><x:val>87</x:val></ext></extLst>
  </bk>
</futureMetadata>
<cellMetadata count="1">
  <bk><rc
t="1" v="0"/></bk> 
</cellMetadata>
Hope this helps.

How to get the cost center for the retro balance.

Hi All
I have this report that gives the retro balance. I get the information from RT and BAL. The problem is it doesn't show the Cost Center for the retro amounts. C1 holds the current periods payments not the retro ones.
Does any one know how can i get the Cost Center of the the amounts that wage type /552 is showing in the RT?
Please Help!!!

Hi
I am not sure on the requirement. You are developing a FI report and accessing VA03 which is sales transaction. Anyway for getting cost center you can go to table VBAK,VBAP for line items.
Hope solves ur problem
Thiru

Excel export contains a blank row for the Report Header

Hi,
I am getting a blank row as the first row in my SSRS report when exported to excel. I have already taken care of following things,
1. I have hidden all of the Page Header items using Globals
2. The position of Report Body Tablix is 0, that means there is no space between report header and Report Body.
I have developed this Report in SSRS 2012, please let me know if any more details are required. I think even after hiding Header Items, excel creates a placeholder for page header. I can't remove header from my reports as it is needed to be published in
pdf.
Regards
Mohit

Hi Mohit,
According to your description, you are getting a blank row as the first row in your excel report when you export the report to excel, you have hidden all the items in the Page Header by using the Globals, right?
This blank row is for the page header, although you have hidden all the items in it, but it will still display when export report to excel. Because we can’t hidden the page Header directly. Normally, we can hidden all the items in the page Header, So in
the design phase we can also see the blank area above the report body when preview.
We have an alternative way by add the “SimplePageHeaders” setting in “RSReportserver.config” file, after configuration the page Header will not display in the first row of the worksheet but is rendered to the Excel page header. In Reporting Services, the
“SimplePageHeaders” default value is “FALSE” and it indicates that the page header is rendered to the first row of the worksheet. In order to display the page header in the Header/Footer section of Excel, we need to set the “SimplePageHeaders” setting value
to “TRUE”. I did a test on my local machine and here are my steps:
Navigate to RSReportserver.config file: <drive:> Program Files\Microsoft SQL Server\MSRS10.MSSQLSERVER\Reporting Services\ReportServer\RSReportserver.config.
Backup the RSReportserver.config file before modify it, open the RSReportserver.config file with Notepad format.
Set the Excel rendering extension code like this:
<Render>
<Extension Name="EXCELOPENXML" Type="Microsoft.ReportingServices.Rendering.ExcelOpenXmlRenderer.ExcelOpenXmlRenderer,Microsoft.ReportingServices.ExcelRendering">
<Configuration>
<DeviceInfo>
<SimplePageHeaders>TRUE</SimplePageHeaders>
</DeviceInfo>
</Configuration>
</Extension>
</Render>
4. Save the RSReportserver.config file.
Note: Changing the rendering extension parameters only affects rendering operations on the Report Server.
When I access to Report Manager and export the report(includes a page header) to Excel format, the blank row will disappear now.
Similar thread for your reference:
SimplePageHeader property in SSRS 2008 not working
Removing 2 top blank rows when export to excel in ssrs 2008
r2 report
You can find more detail in these articles about the page header and page footer:
Exporting to Microsoft Excel (Report Builder and SSRS)
If you still have any question, please feel free to ask.
Regards
Vicky Liu

Cost variance for the material master

Hi all,
This is very urgent requirement.
How to maintain cost variance for the material master?
I will assign the points
venu

Hi,
Material Variance key will be assigned in Material master Costing data tab
Best Regards
Ashish Jain
Message was edited by:
Ashish Bohara

Is it good idea to use style sheet for the bgcolor of a table that is just

is it good idea to use style sheet for the bgcolor of a table that is just being used for formatting

Hi,
CSS is a way to do so. I don't think that there is any problem with using CSS on any kind of table
Frank

Is there a cheat sheet for the badges in the thumbnails?

Is there a cheat sheet for the badges in the thumbnails?

Thanks Victoria, but I believe it was Bob Somrak that spotted the error. ctually, though, take a close look. I think there are 3 or 4 labels mixed up. Apparently, there are not a lot of badge icons and I discovered that if you land the mouse pointer on them a description shows up describing what the icon means. Thought I had tried that but must not have waited long enough for the description to appear. Wondering if Adobe has their ducks in a row. I searched their help pages for 2 hours and could only find one mention of one of the badges. Finally got on email chat with some guy with possibly an Indian name (the country, not American Indian) and spent another hour trying to communicate with him. Was one of the most frustrating experiences I’ve ever had. The guy just could not grasp what my question was no matter how I tried to ask it! I finally told him to have a nice day and closed the connection. What a way to run a Help site!
Thanks again,
Willy

Data Sheet for the TNT4882

Where can I find a "real" data sheet for the TNT4882 that shows voltage levels, currents, setup times, etc.

The appropriate link is available from:
http://www.ni.com/support/gpib/reg_prog.htm

Wrong cost allocated for the Moving Average item

Dear Experts,
Please see this inventory audit report.. Wrong cost allocated for the Moving Average item
[screenshot here|http://www.flickr.com/photos/45736280@N07/4347146537/sizes/o/]
Please help advice why.
Warmest Regards,
Chinho

Oh yes, István is totally correct. I realized I had gotten my definition of Moving Average calculation wrong.
The actual moving average cost price is actually calculated in the background after each purchase. The cost price shown on the screen for each purchase is simply the cost price in the purchase document.
At the point of each purchase, the Moving Average price is updated as:
Actual moving average price = (Last total cumulative value + current purchase trans value) / (Last Cumulative Qty + current purchase qty)
Hope it helps and Thanks guys for the advice!
Regards,
Chinho

Configuration for iObject Fact sheet for the PCUI

Dear all,
Can anyone guide me through the process of customizing an iView for Fact Sheet for the PCUI. I need to know the steps in the backend process in the IMG.
I really apprecaite the help.
Thanks,
Vick

Hi,
Did you ever solve this issue?
I too am having the same problem and cannot display the factsheet or summary using the 'Go To' button in EP.
Any help would be much appreciated.
Regards
Jo

Freight cost condition for the whole purchase order (Header relation)

Maybe you could help me out with the following difficulty regarding freight costs for the whole purchase orders from the mass maintenance transaction MEK1 for pricing conditions.
I try to have one freight condition for the whole purchase order.
For instance, I maintained in the transaction MEK1 for the condition FRA1 the key combination vendor and purchasing organization (table 44) and entered an absolute value of X EUR.
Unfortunately this condition will not pulled as header costs in the purchase order, because I would have had defined an access sequence in the condition type, but this is not allowed for header conditions in general.
Do you have any workaround to maintain an item condition, which works like a header condition, so that I am allowed to have an access sequence and be able to maintain MEK1?
Any comments and help are very welcome.
Many thanks in advance
Sabrina

Hi,
Fright and discount conditions are called supplement conditon type and they are always matained with main condition type.
Please check PB00 condition type in m/06 transaction. You will find pricing procedure assinged as RM0002 to PB00 condtion type.
So you can maintain fra1 and other supplement condtions in main condtion only in MEk1 trasnaction.
By selecting the line item and then shift + F7 you can maintain fright or discount condtions for PB00 condition types with out having access sequence for supplement condtion types.
Regards,
shailesh Mackwan

Two Cost Element for the same GL

Hi,
We have 2 Company Codes - 1000 & 2000. We are using same CoA in both the Company Codes. We have a GL, say 12345678 for posting short/excess amount. So during MIRO, the accounting entry would be:
GR/IR a/c dr.          10,000
GL 12345678                  2
                   Vendor            10,002
GL 12345678 would be dr or Cr would depend on short/excess amount.
We have created Cost Element for this GL 12345678. If I post the MIRO without attaching a Cost Center to this Cost Element system thows an error to attach the Cost Center. I have separate Cost Center for Company Codes 1000 & 2000 however I can only put one Cost Center in this Cost Element.
Can anyone advice how can I post the above mentioned entry with different Cost Center. This line item (GL 12345678) is generated automatically and the Cost Center field is greyed out hence I don't have option to enter the Cost Center during MIRO. I checked the FSG of this GL, Cost Center field is 'Optional' over there.
Thanks,
Sandy

Solution Option* -You can assign Differant Cost Centers to Company Code 1000 and Company Code 2000 in OKB9 Transaction Code.Follow the below process....
--- Go to OKB9
--- Select New Entries button
--- Give the Company Code 1000 in first row and 2000 in 2nd row
--- Enter the Cost element 12345678 for company code 1000 and 2000
--- Enter the relevent cost centers for company code 1000 and 2000
--- Select Save
Thanks
Fit 4 Nothing

How to asssign output value in the CSV file for the specific header

Hi,
I am using OpenScript 9.10. The problem I am facing is that, to Write the Output value captured from the application, When i am trying to use the methods "Appen String to File" i am unable to write / assign the out put value below the specific header. Can any one please look into this and post the methods related to Write the output vaues in to the CSV files under specific headers.
Thanks in Advance.
Thanks.,
Siva

Hi Alex,
Thanks for your reply.I need to write the output value under specified parameter name.
for example after creating the sales order,the order number have to write in the CSV file under
OrderNumber column.I tried with appendStringtofille() method,by using this able to write the value under
first column.But i need to write output value under specified columnname(means Header name in the cSV
file).can u please give a reply for the above problem.
Note: In that Csv file i am taking the input vales and also need to write the output values under
specified column(header)
Thanks,
Siva Thota.

Display vendor name in the additional costs details for the PO

Hi,
I was wandering if there is any possibility to display vendor's name in the additional costs detail in the conditions tab in PO.
As for standard, only the vendor number is shown.
Regards.

Hi,
It is not possible to view the name of vendor there in "Addiitonal Data" screen for the condition type.

Cost sheet for the over head caluculation

Similar Messages

Maybe you are looking for