Cost sheet without activity(Product costing)
Hi,
In our company code all earlier created cost sheets have activities, which are assigned in cost element group. And in base of the cost sheet, this cost element group has been assigned.
Now in the new process, for which the cost sheet to be prepared, there are only overheads and no activities.
Is it necessary to create cost element group?
Is it necessary to assign the cost element group in Base?
Any activity to be created by assigning zero value in KP26 for routing purpose?
Please suggest.
Prakash.
Hi,
Yes. You need to assign the cost element group where the base cost shall be available to calculate the surcharge on the basis of overhead percentages.
Activities shall not be found in Costing sheet. It is assigned in work center and KP26, you enter the planned prices. That is separate. In costing sheet you need to define overhead percentages.
Trust this helps much!
Cheers!
Similar Messages
-
WIP Calculation without implementing Product Costing
Hi Gurus
Can you tell me how to calculate WIP cost without implementing Product Costing.
Thanks and Regards
Rahul JainHello Rahul,
What was the answer for your concern? would be interesting to know.
Regards, -
How the raw material cost is picked in product cost in case of split materi
how the raw material cost is picked in product cost in case of split material in BOM
Hi
In case of Std cost (CK11N), the planned price or MAP that you enter in the Parent accounting View will be considered for the cost calcualtoin purpose
Parent view means the view which is above the 2 or more valuation types which consists of avg value of all other val types
Ajay M -
MESSAGE ERROR: WIP a target cost only possible with Product Cost by Period
I work with orders assign to WBS Element (Non-valuated stock).
If I enter confirmation to an order created, and then execute KKAX transaction to calculate WIP, the system shows this error message u201Cu2018WIP a target cost only possible with Product Cost by Periodu2019u201D, but actually the result has been calculated ok.
If WIP is executed collectively KKAO the error message is the same but the result is not calculated
Everything suggests that what we want is possible, but the error doesnu2019t disappear
Does anyone know what could be reason for the error?
ThanksHi
Check your RA key and WIP customizing... WIP at target cost is possible only in Product cost by period
Check your settlement rule in Prod Order.. I guess it would be FUL and not PER.. FUL settlement means you are in product cost by order.. There seems to be a mismatch between your settlement type (FUL/PER) and WIP config
Moreover, if your stock is non valuated, do you at all need to calculate WIP for prod orders? I dont think so
Ajay M -
No costing Sheets But activity types
One of my client is implementing overhead costs without using costing sheets instead they are using activity types Can any body could brief me how this could be possible?
Points would be awarded
Thanks in advanceas mentioned in my last response:
Or you can have two activity types : LAB and LABOH
price each one with the desired rate
The costing formula in the workcenter whould have LABOH use the same field (LABOR HOURS) as LAB uses.
In transaction OP54 my labor formula (SAP007 in the work center) Is:
SAP_03 * SAP_09 / SAP_08 which means:
Labor * Operation quantity / Base quantity
I use the same formula for overhead - so that it uses labor hours
this means that a confiramtion of labor hours will supply the labor hours for OH calculation
Althea -
Cost sheet with related with cost of sale
i need to prepare cost sheet based on this scenario.
Dispatched qty /production qty 70000
Selling price:30
sale value:2100
RM cost RSin 000 Bases of overhead
1050
MOH 525 50% of Rm cost
POH 140 RS 2 pieces
AOH 420 20% selling price
SOH 210 10% selling price
FOH 105 5%selling price
Direct Labour cost 100 through Activity rate.
Depreciation 100 through activity rate.
Total 2650
total sale value is 2100000 instead of that value is coming 2100 how to rectify that error.how to configure the cost sheet.
give me a solution
ra0resolved my self
-
Table for Material-Cost center-Settlement Rule_REM product cost collecter
I want to generate a report to see for particular material which cost center and which settlement rule is available.
If we go in Product cost collecter (PCC) there we have an option to see settlement rule under header tab, I want to fetch that data for material as selection parameter, can anyone suggest how to get the data as,
Material Cost Center Settlement Rule
Thank you.
Regards,
DevenHi,
pleasefind tables related with cost.
TKA01 Controlling areas
TKA02 Controlling area assignment
KEKO Product-costing header
KEPH Cost components for cost of goods manuf.
KALO Costing objects
KANZ Sales order items - costing objects
Cost center master data
CSKS Cost Center Master Data
CSKT Cost center texts
CRCO Assignment of Work Center to Cost Center
COSP CO Object: Cost Totals for External Postings
COEP CO Object: Line Items (by Period)
. COBK CO Object: Document header
COST CO Object: Price Totals
Regards
SANIL -
Product Cost by Period and Product Cost by Order
Hi,
For one client can we go for a group of materials(FERT) with Product Cost by Period and for some other group of materials materials (FERT) Product Cost by Order.
My question is can both the concepts be used simultaniously for one client?
Any difficultieis if you follow both the concepts simultaniously.
I Would greatly appreciate your replies.
Thanks!!!
-KumarHi
You can very well use both the scenarios at same time.. Absolutely no issues with it...
Ensure that your Prod order types are separate for both the scenarios....
Prod Order type for Cost by order will have FUL as settlement type and the order type for Cost by period will have PER....
So, your user in shop floor needs to have that discipline of selecting the correct order type..
If your identification is based on some field like Material group, you can also put a custom ABAP check which wil give an error message incase wrong order type is chosen
For eg: Mat group ABC is allowed for cost by order... Order type for cost by order is Say, ZPP1... Your ABAP code can check if Mat group is ABC and order type is not ZPP1, then issue an error message
To put this check, use BADI WORKORDER_UPDATE
Regards
Ajay M -
Activity Independent Cost and fixed activity dependent cost
Hello
In cost centre planning, how an activity independent cost is different from a fixed activity dependent cost? Are not the treatment of the two is same. B/c both ara fixed in nature and do not vary with activity output?Hi
Activity Dependant cost is treated as Variable cost.... When you calculate act price, such costs are only divided by this act type
Activity Independant cost are only for Fixed Costs... These costs are split between all act types of a cost center during Actual Activity Price calculation
br, Ajay M -
Creat Cost center assig activity type, cost center need to be tras to COPA
Dear All
I have created a Cost Center, and Assigned Activity Type by KP26
Now this Cost Center need to be transported to COPA
Plz let me know the procedure what are the steps need to be followed.
With Regards,
kamalif you want to run an assessment of cost centers to CO-PA, you should create and run a cycle in KEU5.
Dude
I have gone to this particular transaction code, I have given period from
1 to 12 and fil year 2007
and given test run,
and given Detal list
its asking me the cycle , and date
where i there is no cycle being defined and date given as 22.02.2008
Its throughing the error msg cycle has not been created.
With Regards,
kamal -
Actual Cost of SFG/FG-Product Cost by Order
Dear Gurus,
We have our SFG and FG maintained with Price Control "S". We have process cost by order scenario.
(We do not have the Material Ledger
Though it is standard price in the "Costing 2" Tab the moving price also gets changed based on the monthly settlements to process orders.
Any report available in SAP to know line item report of such materials so as to know the Moving Price apart from the material master.
Thanks & Regards,
Amit DhanurdhariHi,
Check in CKM3 transaction for the details.
or click the button in the material master Accounting 1 view,MAP button
Regards,
Raj -
Transaction code for viewing Costing Sheet
Hello Sap Gurus,
I am a SAP user.Can you suggest me a Transaction code for viewing Costing Sheet.
Regards,
Pawan KumarDear Pawan Kumar,
For checking the costing sheets related to product cost controlling use KZS2.
For Costing sheets related to Internal orders use KALK.
Regards
Mangalraj.S
Edited by: Mangalraj.S on Apr 20, 2009 3:06 PM -
How we calculate product cost without taken activity type
Respected sir,
pls tell me without taking activity type costing can we calculate product cost? is it possible through Overhead costing to calculate product cost?
or if we taken quantity base costing how we calculate each product cost?
please help me.......
Than'x
DhananjayHi
Without Activity type you cannot calculate Operation cost. It is not good practice. Why you want to do like this. Please explain.
I think Over head cost can be calculated without operation cost.
Regards
J. Saravan -
Product Cost Sheet report from BW
Hi,
I would like to know if somone has generated the cost sheet report for product/material combination in BW.
I have a requirement for report as follows:
Cost Sheet for FG 101
Qty Uom Price Resource Cost Element
Stage 1:
RM1
RM2
Activity 1
Overhead
Stage 2:
Stage1
RM4
Activity 2
Stage3:
Stage2
PM1
PM2
Total Costs for FG 101:
Total Per Unit costs FG 101:
The costs and quantity must be same as explored in CK13N transaction. Howver, the organization of report must be of above mentioned patttern.
Regards,
Ankita
Moderator Message: Not ABAP-related
Edited by: kishan P on Nov 8, 2010 8:45 AMRequirement postponed by business, so withdraing the thread
-
Hi,
I would like to know if somone has generated the cost sheet report for product/material combination in BW.
I have a requirement for report as follows:
Cost Sheet for FG 101
Qty Uom Price Resource Cost Element
Stage 1:
RM1
RM2
Activity 1
Overhead
Stage 2:
Stage1
RM4
Activity 2
Stage3:
Stage2
PM1
PM2
Total Costs for FG 101:
Total Per Unit costs FG 101:
The costs and quantity must be same as explored in CK13N transaction. Howver, the organization of report must be of above mentioned patttern.
Regards,
AnkitaRequirement postponed by business, so withdraing the thread
Maybe you are looking for
-
Mozilla sometimes goes a head and loads the new version and we do not get it in time. We may switch to Explorer to avoid continuing problems. Contact iYogi or McAfee for clearer explaination.
-
Help with solution for receiver axis soap multipart
Hi everybody. I've read many questions made by people to this forum with no possitive results to my issue. I'm developing a simple scenario : RFC>XI>Webservice in a sync way. I call a FM in an R3 backend and i must retrieve a string from the webservi
-
Permissions differ on "......"
Not sure if this is the right thread... but when I verify disk permissions I'm getting.... Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- . Permissions differ on "S
-
Logrot.pl (v.4.4) issue on solaris 9
logrot.pl does not check diskspace before doing a copy process of syslog_info; if there is not enough space, the copy process fails and the content of syslog_log is lost; I know, that the error handling of such a script cannot take respect on each an
-
Print the attachements added in the adobe form
Hi, I added the attachments in the adobe form.But when ever i print this adobe form , i want to make sure that the attachments are also printed in addition to the original adobe form. Is there any automatic way of doign it or any alternatives to avoi