COST table diffrent version

Hello,
I would like to know why are there 2 entires for some entries in the Cost Center for the same Object ID,pretty much everything is the same except the Version.And its not neccessary for every year to be like that.Like i have one fr 1998 has 2 versions, while 1999 just has one and 2007 has three versions ie 000,001 and 002.
I am a developer and so which one should i consider for reporting or should i consider all of it.Please advise?
Thanks.
Edited by: Zain Naser on Aug 4, 2008 5:10 PM

Check the versions created in transaction code OKEQ and 'Settings for each fiscal year' in the dialog structure. In this transaction, version 0 is automatically created when the controlling area is created. Additional versions can be created here, which is usually done for planning. Multiple planning data can be entered into the system (using various versions), compared and when final and approved, planning is done in version 0. Version 0 is also the default for actual data in controlling. You should be good if you consider just version 0 in table COST, if you are dealing with actual data. For planning data, you should ask the person who gave the requirement to you, as to which version should you pick up.

Similar Messages

How to see diffrent version of object.

Dear Experts,
Can i see diffrent versions of data source & transfer rule. Because after EHP4 upgrdae in R/3 , i had to activate souce system & replicate data sources in BW. There are some changes in data sources , i want to see previous version & compare with present version.
Regards,
Anand Mehrotra.

Hi Anand,
I hope the changes have been made in Development system.
Goto Testing/Production environment & check for the previous versions of the objects & you can comnpare them accordingly with the Development system changes.
Hope it helps!
Regrads,
Pavan

Sales Order Costing using prod version

Hi Guru,
My client use MTO and have prod version 1000 & 2000. When I create SO and choose prod.version 1000, prod.order created using BOM/Routing in prod.version 1000, so the prod order cost plan.
But in costing SO, prod version 2000 is use as base in qty structure, it's mean SO plan cost is based on prod version 2000, not 1000.
How the logic of SO costing ? where config to be set in order to get SO costing based on prod version choosen.
Reward will given to any input.
Thanks

You may want to have a look at OKK5 - Quantity structure determination.(QSD)
Choose the Quantity Structure control and double click. Then click on the BOM application. In there, there is section for override alternative selection from material master. There is a check box for production version. whose help reads as
This indicator shows that, when alternatives are selected automatically according to application, the production versions maintained in the material master record are used as selection criteria.
Dependencies
<b>In the MRP view of the material master, in the requirements explosion data, the indicator for selecting alternative BOMs is maintained.
When you explode the BOM, only the alternatives for which selection by production version (2) is defined are taken into account for selection.</b>

IW32 needed Plan Cost and Actual Cost table name

Hello ,
In IW32 transaction Plan Cost and Actual cost in cost tab ---Table Name.
Req: needed plan cost & actual cost table names for particular order number.( For New Report )
Can you please let me know where Plan cost & actual cost get stored in IW32 in Cost tab ( table name / function module name ) or how its get calcualted for particular order number.
Thanks in advance !
Regards
Rahul

hi ,
i too had same issue , i wrote following FS for that :
Actual and planned cost from PMCO-WRT00 to WRT12(the sum of values should be considered for actual as well as planned ) for PMCO-OBJNR taken from CAUFV -OBJNR for order number AFIH-AUFNR and also currency from CAUFV-WAERS .
Actual cost will have valuation type PMCO-WRTTP = 4 and planned cost will have valuation type PMCO-WRTTP = 1 , which will be placed in different column
hope this helps
regards
satish

How much cost the edu version for teacher of flash professional?

It is not clear.
How much it cost the edu version for teacher of flash professional for cloud?
Thank you.

Creative Cloud Plans
https://creative.adobe.com/#plans

Unable to join Unit Cost(Cost table) to Sales Table.

Hi All,
I am beginner for OBIEE technology.May be this question is silly for you but i am facing issue in it.I am mentioning my issue below:-
We have two tables one is SALES(Fact Table ) and second one is COST (Fact Table). I want to apply Calculation Measures on this logical tables(BMM Layer).As per Oracle document,when they are dragging Unit_Cost column from Cost table (Physical Layer) to Sales table then no logical source table is creating for them but when i am trying this then I am getting one more logical source table (COST).So my doubts are :-
1) Why is the other LST is creating for me?
2) I s there any join require between COST and SALES Table to remove this Logical source table(Cost)?
Please let me know if any clarification is require on this issue.
Thanks
Shashank Jain

it is correct. we you have two or more sources for same logical table obiee will create LTS for each source. you can't join these two fact tables physically but they will join using conformed dimension(common dim) based on physical schema design in physical layer.
Thanks
Jay.

"starter placer cost table" option in FPGA

Can someone explain when to use the "starter placer cost table" option in FPGA?
Steve

For others reading this, here's what we're talking about:
Here's what the Xilinx Documentation says about it (it's a map & place and route feature):
Starting Placer Cost Table (1-100)
Specifies a placement initialization value with which to begin the Place and Route attempts. Each subsequent attempt is assigned an incremental value based on the placement initialization value. Select a number from 1 to 100.
The number you choose corresponds to a cost table index and results in different Place and Route strategies. Cost tables assign weighted values to relevant factors such as constraints specified in the input file (for example, certain components must be in certain locations), the length of connections, and the available routing resources. Cost-based placement is described in the "PAR" chapter of the Command Line Tools User Guide.
By default, this property is set to 1.
Basically, it's the starting seed for the Xilinx Algorithms that try to get all of your logic in the right place on the FPGA.
So, back to your question: when should you change it? I would say almost never. I think the best time to use it is if you're running into a PAR bug that causes the compilation to hang or crash. It can help you meet timing, but you're likely going to have to do a lot (hundreds) of compilations to find the right value. Since we only let you use a random value... hitting that checkbox might let you meet timing when you compile, and then not the next time. Useful if you're tight on timing and have a final design that you're trying to get a bitfile for. Not so useful during development.
Here's a full article on Xilinx's website: http://www.xilinx.com/support/answers/35534.html

Inserting Cost Table

Hi,
I want to add different Cost rate table for a particular assignment any easy steps and secondly need also some help in making a group cost. Anyone??
Thanks,
Emil Vega

Dear Emil,
There are very simple steps in MS 2010.
to set a different Cost rate table for an Assignment:
1.Display the TASK USAGE or Resource Usage view.
2.Set a different cost rate table for a particular assignment.
- Set a different cost rate table in the cost rate table Column
a.Insert the Cost Rate Table Column
b.If necessary, reposition the cost rate table column
c.In the cost rate table column, from the cost rate table drop-down list corresponding to the appropriate assignment, select the desired cost rate table.
d.Just press Enter
-Set a different cost rate table in the Assignment Information dialog box.
a. Double-click the appropriate resource or task corresponding to the desired assignment to display the Assignment Information dialog box.
b. On the General page, from the Cost rate table drop-down list, select the appropriate cost rate table.
c. Click OK.
For Group Cost:
Group costs using the Group Definition dialog box:
1. Display the Cost table, or insert the appropriate columns in the desired view.
2. On the View tab, in the Data section, choose Group by→More Groups to display
the More Groups dialog box.
3. If you want then, select Task or Resource to specify the type of group to create.
4. Click New to display the Group Definition dialog box
5. In the Group Definition dialog box, specify the desired settings.
• In the Name text box, type a suitable name for the new group.
• Check the Show in menu check box to display the new group on the Group by submenu.
• Check the Group assignments, not tasks or Group assignments, not resources check box to display only resources or tasks, respectively.
• In the Group Definition table, specify the grouping criteria.
a. In the Field Name column, from the Field Name drop-down list corresponding to Group By, select the desired column name.
b. If you need then, in the Order column, select Ascending or Descending to sort results in ascending or descending order, respectively.
c. If necessary, in the remaining Then By rows of the Group Definition table, specify more grouping criteria.
In the Group by setting for section, select the required Group By or Then By row and specify the desired font, cell background color, and pattern to be applied to tasks or resources that match the grouping criteria.
I hope it helps you...
Regards,
Muhammad Enam Ur Rehman

Cost table in unifier

Hello,
I would like to know if there is a way to add a cost table where we can see the forecast month by month or quarter by quarter : roughly speaking, a way to associate dates with costs. I didn't found how to do it whit the cost sheet.
Many thanks in advance for your support
Thomas

The Cash Flow will provide what you are looking for. You can define the Forecast column in the Costs Sheet as your source of cost and then you can define date ranges and profile curves to be applied to the forecast.

Cost Center Plan - versions

Hi
The standard SAP is given three version for maintanance of the cost center planning Version 0, 1 and 2. Our client is having the planning reviews on quarterly basis. hence he need total 5 versions.
0 version he wants to use the planning for the financial year at the time of the budget
1 version is required for 1st quarter approvals
2 version is required for 2nd quarter approvals
New versions are required for 3rd & 4th quarter approvals
Kindly suggest, does it possible to create teh new plan versions where we can maintain the plan through KP06
Regards
Anilkumar

Dear Prasad
Thanks for prompt response, Is there any impact if we create new version ? Is there any SAP suggested documentation
Kindly revert
Regards
Anilkumar

Reallocation of Cost to Diffrent Cost Centers

Hi
I want costs posted to cost centre 9xxx could be reallocated to cost centers 2xxxxx and 2xxxxxx1
How to reallocate costs to diffrent cost centers
Thanks
Imran

Hi Imran,
You can use the distribution & asessment cycle for allocation of costs. In distribution cycle you can allocate primary costs whereas in assessment you can assess primary & secondary costs through an assessment cost element.
If useful....assign points.
regards,
Amol

Delete Variance data from COSB table for version 1

Hi,
We are trying to change the Valuation of version 1 from Legal to Profit center in OKEQ.
While doing so, we are trying to remove variance indicator due to error message KT337.
When trying to uncheck variance indicator for this version there is error message KV853.
SAP per SAP note 337183, if there are any dependent entries in COSB table (CO Object: Total Variances/Results Analyses) we get this message.
Now the question is how can i delete the variance data with version 1 from the table COSB.
Message no. KT337 :
Valuation variance from version "000"
Diagnosis
You are maintaining version 1 in controlling area 1000. The actual indicator is not active and at least one of the two indicators WIP and Variance are active. In this case, the valuation in version 1 must match the valuation of version '000'. This is not the case: 2 <> 0.
Procedure
Activating the indicators WIP and Variance with the actual indicator being inactive at the same time requires valuation 0.
Message no. KV853
Variance calculation cannot be reset - there are dependent entries
Regards
Raghu
Edited by: Raghu Ram Thatavarthy on Nov 16, 2011 3:35 PM
Edited by: Raghu Ram Thatavarthy on Nov 16, 2011 3:36 PM

You may need to contact the SAP SLO (System landscape optimization) team

SAP - Cost Center Planning - Version 1

Dear All
Recently we have started to use the cost center planning through KP16 under plan version -1
However we are unable to down the plan data in excel with a cost center break up through KSBP report.
We are not using any special ledger
System is showing the following error
No plan cost line items recorded.
Message no. KB419
Diagnosis
No planned costs line items are written to controlling area DXES in version 1 of fiscal year 2009.
System Response
The report cannot be executed.
Procedure
Check your selection criteria or activate the line item update function.
Note
The line item update function is controlled depending on the application:
Cost center planning
Here you can define the update for each version and fiscal year. You can maintain the corresponding indicator (integrated planning) in the version maintenance (settings for the fiscal year).
This indicator you can either
set manually when creating a version or
set later via the menu sequence "Planning -> Planning aids -> Integration active".
Regards
Anilkumar

Hi,
The impact is that the planning is stored also as line items and the planning is integrated between the CO-PCA components. In SAP words:
- All available plan records for controlling area/version/fiscal year are posted as line items. The R/3 System posts these line items to the AC interface.
- Any existing line items in the plan allocation transactions (plan assesment, distribution, or accrual calculation) are posted to the AC interface as well and made available to other components.
Regards,
Eli

CATS-Cost table

Hi all,
I am trying to generate a new report for CATS time entries. In which table can I get the cost for the particular hours confirmation per employee (Not cost of the PM order as a whole; instead the confirmation wise cost data) Can anyone please tell which table contains this field? COEP table is not helping as I need the cost of the employee for individual PM order confirmations
Thanks & Regards,
Jegashree

Hi Jegashree,
You can get the details like employee no/name and PM order no. as well as the cost per hours from table CATSM .
In this you will get the hours per actiivty type and i suppose you must have defined the cost of the activity in KP26......
will this be useful for your query????
regds
SS

Standard & actual cost table

Sir,
I ve to create standard & actual cost report for client in PP
But i cant gate table & field name for:-POWER & UTILITY,
                                                            PACKING COST,
                                                            SALARY & WAGES,
                                                           FACTORY OVERHEAD,
                                                           DEPRECIATION
Hi gurus please suggest table names
Moderator: If it's PP, why do you ask it on Conrolling forum? Anyway, a question likes this could not be properly answered

Hi
Check the fun modules
K_VARIANCES_PARALLEL_CALC
K_VARIANCES_HIERARCHY_CALC
K_VARIANCES_OBJECT_CALC
<b><REMOVED BY MODERATOR></b>
regards
Anji
Message was edited by:
        Alvaro Tejada Galindo

COST table diffrent version

Similar Messages

Maybe you are looking for