Could Anyone Help Me Comment This Coding
var loader:URLLoader = new URLLoader();
loader.addEventListener(Event.COMPLETE, onComplete, false, 0, true);
loader.addEventListener(IOErrorEvent.IO_ERROR, onIOError, false, 0, true);
loader.load(new URLRequest("game.xml"));
ii Need To Comment My Coding And ii Cant Remember What This Does Again..
ii Know Part Of It ii Think But Not Sure..
Thanks.
You should examine each line and figure out what each is doing and comment each one. TAke a stab at it yourself first, then ask for help.
Similar Messages
-
Good morning to all of you
I have A mac and I did the mistake of upgrading my Lightroom 5.4 to 5.6 Now I can't import anything it says "Could not find namespace: AgCreativeCloudUtils"
Could anyone help me resolve this problem?
Should I uninstall the program and reinstall it
Thank you so muchI asked because an awful lot of people have recently been confused between downloading the Cloud and the perpetual versions of Lr - although I'm not automatically assuming your'e guilty of this - and can't understand why their serial no won't unlock their new software.
If the wrong version has been installed, then it must be uninstalled and the right one downloaded. -
Sorry. This is where my question should be....
"In the ICLOUD section of iCal" - I don't have this on my Mac iCal. How would I get it? I currently have an empty iCal on iCloud. I urgently need to back up my iCal, Could anyone help please? This is SO frustrating.Have you enabled iCloud syncing for calendars on your mac, which requires OS X Lion (10.7.2)? See http://www.apple.com/icloud/setup/mac.html.
-
I can sync icloud calender with pc based outlook calender. Photos also sync. But can not sync contacts. Already checked contact boxes in icloud and and on my PC. Also tried to reset Document & Data on icloud. Could anyone help me on that?
That's what I did... switching on iCloud calender in the panel leads to the following: The existing local Outlook calendar gets mved to an new iCloud calendar.Thus the local calendar is empty.
Given that iTunes dows not allow my whife's phone to be synced with that iCloud calendar (only the local acalendar appears in the list of available calendars in iTunes; syncing all dioes not include the iCloud one) this leads to an empty alendar on my whife's phone.
Hence the question how to
a) get iTunes to include the iCloud calendar to sync with the iPhone 2g (preferred) or
b) enable a local MS Outlook internal sync between the two calendars. -
Could anyone help me with this problem?
Hello!
I�m a working with JMS Tutorial of Jms.(J2EE 1.3.1). I follow all the steps of the tutorial, and when i write
"java -Djms.properties=%J2EE_HOME%\config\jms_client.properties SimpleQueueSender MyQueue 3"
The console shows me the following error:
"Exception in thread "main" java.lang.NoClassDefFoundError: Files\s1studio\ee\j2s
dkee1/3/1\config\jms_client/properties"
I don�t know hot to fix this error. The classpath, and all the variables are correctily defined. I use XP o.s., jdkse 1.4 and j2see 1.3.1, and i repeat, i follow the steps of the tutorial. Could anyone help me?
Many Thanks.
Note: Sorry for my poor English.Well, it looks as if somehow your command window is converting periods into forward slashes, since "1.3.1" appears in the output as "1/3/1" and "jms_client.properties" appears as "jms_client/properties". That is why the file is not found. If you can figure out how to stop it from doing this, the java command should be able to find the file. I'm afraid I know nothing about Windows XP command windows, however.
I'm sorry not to be more helpful.
Kim Haase
Technical Writer
Sun Microsystems, Inc. -
iv moved all the music over thought home sharing... from the old itunes i was using but i want to be able to sync my iphone with the new itunes on my new machine but its saying saying syncing setp 1 of 1 and nothing happens... could someone please help me with this?
Copy the entire iTunes folder from the old computer to the new computer.
-
Could anyone help me analyze this dump file?Thanks!
===== BEGIN DUMP =============================================================
JRockit dump produced after 0 days, 22:13:58 on Sat Oct 9 16:54:30 2010
* If you see this dump, please go to *
* http://edocs.bea.com/jrockit/go2troubleshooting.html *
* for troubleshooting information. *
Additional information is available in:
/home/weblogic/bea/user_projects/domains/uims/jrockit.26915.dump
No snapshot file (core dump) will be created because core dumps have been
disabled. To enable core dumping, try "ulimit -c unlimited"
before starting JRockit again.
Error Message: Illegal memory access. [54]
Signal info : si_signo=11, si_code=1 si_addr=0xab340394d0
Version : BEA JRockit(R) R27.6.5-32_o-121899-1.6.0_14-20091001-2113-linux-x86_64
CPU : Intel (null) (HT) SSE SSE2 SSE3 SSSE3 SSE4.1 SSE4.2 Intel64
Number CPUs : 16
Tot Phys Mem : 16804540416 (16026 MB)
OS version : Red Hat Enterprise Linux Server release 5.4 (Tikanga)
Linux version 2.6.18-164.el5 ([email protected]) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Tue Aug 18 15:51:48 EDT 2009 (x86_64)
Thread System: NPTL
Java locking : Lazy unlocking enabled (class banning) (transfer banning)
State : JVM is running
Command Line : -client -Xms512m -Xmx1024m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=128m -agentlib:jprofilerti=port=8849,nowait,id=107,config=/opt/jprofiler5/config/config.xml -Xbootclasspath/a:/opt/jprofiler5/bin/agent.jar -Dweblogic.ext.dirs=/home/weblogic/bea/patch_wls1030/profiles/default/sysext_manifest_classpath:/home/weblogic/bea/patch_cie660/profiles/default/sysext_manifest_classpath -Dweblogic.Name=AdminServer -Djava.security.policy=/home/weblogic/bea/wlserver_10.3/server/lib/weblogic.policy -Dsun.java.launcher=SUN_STANDARD weblogic.Server
java.home : /home/weblogic/jrrt-3.1.2-1.6.0/jre
j.class.path : :/home/weblogic/bea/patch_wls1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/weblogic/bea/patch_cie660/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/weblogic/jrrt-3.1.2-1.6.0/lib/tools.jar:/home/weblogic/bea/wlserver_10.3/server/lib/weblogic_sp.jar:/home/weblogic/bea/wlserver_10.3/server/lib/weblogic.jar:/home/weblogic/bea/modules/features/weblogic.server.modules_10.3.0.0.jar:/home/weblogic/bea/wlserver_10.3/server/lib/webservices.jar:/home/weblogic/bea/modules/org.apache.ant_1.6.5/lib/ant-all.jar:/home/weblogic/bea/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar::/home/weblogic/bea/wlserver_10.3/common/eval/pointbase/lib/pbclient57.jar:/home/weblogic/bea/wlserver_10.3/server/lib/xqrl.jar::
j.lib.path : /home/weblogic/jrrt-3.1.2-1.6.0/jre/lib/amd64/jrockit:/home/weblogic/jrrt-3.1.2-1.6.0/jre/lib/amd64:/home/weblogic/jrrt-3.1.2-1.6.0/jre/../lib/amd64::/opt/jprofiler5/bin/linux-x64:/home/weblogic/bea/wlserver_10.3/server/native/linux/x86_64:/home/weblogic/bea/wlserver_10.3/server/native/linux/x86_64/oci920_8
JAVA_HOME : /home/weblogic/jrrt-3.1.2-1.6.0
JAVAOPTIONS: <not set>
LD_LIBRARY_PATH: /home/weblogic/jrrt-3.1.2-1.6.0/jre/lib/amd64/jrockit:/home/weblogic/jrrt-3.1.2-1.6.0/jre/lib/amd64:/home/weblogic/jrrt-3.1.2-1.6.0/jre/../lib/amd64::/opt/jprofiler5/bin/linux-x64:/home/weblogic/bea/wlserver_10.3/server/native/linux/x86_64:/home/weblogic/bea/wlserver_10.3/server/native/linux/x86_64/oci920_8
LD_PRELOAD : <not set>
LD_ASSUME_KERNEL: <not set>
StackOverFlow: 0 StackOverFlowErrors have occured
OutOfMemory : 0 OutOfMemoryErrors have occured
C Heap : Good; no memory allocations have failed
GC Strategy : Mode: static, with strategy: singleconcon
GC Status : OC currently running, in phase: final marking. This is OC#197.
Heap : 0x40d00000 - 0x6c9e2000 (Size: 700 MB)
Compaction : 0x67245c00 - 0x6c9e2000 (Current compaction type: internal)
CompRefs : References are compressed, with heap base 0x0.
Registers (from ThreadContext: 0x2aaaeb6ce6b0 / OS context: 0x2aaaeb6ce770):
rax = 000000ab340394d0 rcx = 0000000000000039
rdx = 00002acd29c9f850 rbx = 00002acd29b533cf
rsp = 00002aaaeb6cebb0 rbp = 00002aaaeb6cec30
rsi = 00000000265160d0 rdi = 00002acd29d75298
r8 = 0000000000000000 r9 = 00002aaaeb6cea40
r10 = 0000000000000000 r11 = 000000332b47a9bc
r12 = 00002acd29b533cf r13 = 00002aaaf149c800
r14 = 000000001f1c6fb0 r15 = 000000001f1c6fb0
cs = ffff000000000033 fs = 00000004ffff0000
gs = 0004ffff00000000
rip = 00002acd29b13ef6 flags = 0000000000000206
Loaded modules:
(* denotes the module causing the exception)
0000000000400000-000000000041303b /home/weblogic/jrrt-3.1.2-1.6.0/bin/java
000000332c000000-000000332c0156ff /lib64/libpthread.so.0
000000332b800000-000000332b88122f /lib64/libm.so.6
000000332bc00000-000000332bc01f93 /lib64/libdl.so.2
000000332b400000-000000332b54ced7 /lib64/libc.so.6
000000332b000000-000000332b01bb3f /lib64/ld-linux-x86-64.so.2
00002acd2996c000-00002acd29b9d16f */home/weblogic/jrrt-3.1.2-1.6.0/jre/lib/amd64/jrockit/libjvm.so
000000332c400000-000000332c406e8b /lib64/librt.so.1
00002aaaaaabb000-00002aaaaaac464b /lib64/libnss_files.so.2
00002aaaaacc6000-00002aaaaadcd77b /opt/jprofiler5/bin/linux-x64/libjprofilerti.so
00002aaaaaf41000-00002aaaab02190b /opt/jprofiler5/bin/linux-x64/libstdc++.so.6
000000332c800000-000000332c813a33 /usr/lib64/libz.so.1
00002aaaab14c000-00002aaaab169b83 /opt/jprofiler5/bin/linux-x64/libexpat.so.1
000000333d200000-000000333d20ca9b /lib64/libgcc_s.so.1
00002aaaab26f000-00002aaaab27b337 /home/weblogic/jrrt-3.1.2-1.6.0/jre/lib/amd64/libverify.so
00002aaaab37e000-00002aaaab3a616b /home/weblogic/jrrt-3.1.2-1.6.0/jre/lib/amd64/libjava.so
000000332f000000-000000332f0140c7 /lib64/libnsl.so.1
00002aaaeb53d000-00002aaaeb54365f /home/weblogic/jrrt-3.1.2-1.6.0/jre/lib/amd64/native_threads/libhpi.so
00002aaaef0e9000-00002aaaef0f69cb /home/weblogic/jrrt-3.1.2-1.6.0/jre/lib/amd64/libzip.so
00002aaaef4b1000-00002aaaef4b649b /home/weblogic/jrrt-3.1.2-1.6.0/jre/lib/amd64/libmanagement.so
00002aaaef5b8000-00002aaaef5ca547 /home/weblogic/jrrt-3.1.2-1.6.0/jre/lib/amd64/libnet.so
00002aaaef70f000-00002aaaef71584b /home/weblogic/jrrt-3.1.2-1.6.0/jre/lib/amd64/libnio.so
00002aaaef857000-00002aaaef85f63f /home/weblogic/jrrt-3.1.2-1.6.0/jre/lib/amd64/libjmapi.so
00002aaaefaab000-00002aaaefaad2af /home/weblogic/bea/wlserver_10.3/server/native/linux/x86_64/libwlfileio2.so
00002aaaf42dc000-00002aaaf42dfd73 /lib64/libnss_dns.so.2
0000003333200000-0000003333210823 /lib64/libresolv.so.2
00002aaaf44e1000-00002aaaf4572833 /home/weblogic/jrrt-3.1.2-1.6.0/jre/lib/amd64/libawt.so
00002aaaf46b0000-00002aaaf46b499f /home/weblogic/jrrt-3.1.2-1.6.0/jre/lib/amd64/headless/libmawt.so
00002aaaf4d02000-00002aaaf4d028bb /home/weblogic/jrrt-3.1.2-1.6.0/jre/lib/amd64/librmi.so
Stack:
(* marks the word pointed to by the stack pointer)
00002aaaeb6cebb0: 00000001f149c800* 0000000000000000 00002aaaf4f9ecc8 00002acd00000001
00002aaaeb6cebd0: 00002aaaf4f9ecc8 00002acd00000001 00002aaaf4f9ecc8 00002acd00000001
00002aaaeb6cebf0: 00002aaaf4f9ecc8 00002acd00000001 00002aaaeb6cec40 0000000000000001
00002aaaeb6cec10: 00002aaaf8f24aa0 0000000000000001 00002acd29b141cb 0000000000000000
00002aaaeb6cec30: 00002aaaeb6cecf0 00002acd29b1415d 0003ac7200000000 0000000000000000
00002aaaeb6cec50: 0000000000000000 0000000000000000 0000000000000000 0000000000000001
Code:
(* marks the word pointed to by the instruction pointer)
00002acd29b13e90: 892974d285000000 0024e898058b48d2 18ebd08948100b48 987d8313eb028b48
00002acd29b13eb0: eb90458b48067503 008b4890458b4807 8949fe894dc38948 0024e640058b48c4
00002acd29b13ed0: c148082b48d98948 e8c148c8894803e9 000008c5048d4806 0024df30158b4800
00002acd29b13ef0: 8b483fe183020348* 5f7501a8e8d34800 480024e609058b48 e9c148082b48d989
00002acd29b13f10: 06e8c148c8894803 00000001ba3fe183 8d48d18948e2d348 8b4800000008c504
00002acd29b13f30: 0203480024deeb15 e436058b48080948 be0d740038830024 e8df894800000000
Roots Dump Helper:
thread=0x2aaaf8f24aa0
method=java/util/zip/Deflater.deflateBytes([BII)I
sp=0x2aaaf4f9ed00
ip=0x5886d4f8
ref=0x2aaaf4f9ecd0
*ref=0x2aaaf4f9ed40
stackIter=0x2aaaf149c858
refIter=0x2aaaf149c8b0
storage=unknown
Roots Processed Thread: "[STANDBY] ExecuteThread: '11' f" id=136 idx=0x230 tid=6407 lastJavaFrame=0x2aaaf4f9fab8
at jrockit/net/SocketNativeIO.writeBytesPinned(Ljava/io/FileDescriptor;[BII)V(Native Method)
at jrockit/net/SocketNativeIO.socketWrite(SocketNativeIO.java:73)[optimized]
at java/net/SocketOutputStream.socketWrite0(Ljava/io/FileDescriptor;[BII)V(SocketOutputStream.java)[inlined]
at java/net/SocketOutputStream.socketWrite(SocketOutputStream.java:92)[inlined]
at java/net/SocketOutputStream.write(SocketOutputStream.java:136)[optimized]
at weblogic/servlet/internal/ChunkOutput.writeChunkNoTransfer(ChunkOutput.java:548)[optimized]
at weblogic/servlet/internal/ChunkOutput.writeChunks(ChunkOutput.java:505)[inlined]
at weblogic/servlet/internal/ChunkOutput.flush(ChunkOutput.java:382)[inlined]
at weblogic/servlet/internal/CharsetChunkOutput.flush(CharsetChunkOutput.java:249)[optimized]
at weblogic/servlet/internal/ChunkOutput.checkForFlush(ChunkOutput.java:469)
at weblogic/servlet/internal/ChunkOutput.writeStream(ChunkOutput.java:423)
at weblogic/servlet/internal/CharsetChunkOutput.writeStream(CharsetChunkOutput.java:210)
at weblogic/servlet/internal/ChunkOutputWrapper.writeStream(ChunkOutputWrapper.java:175)[inlined]
at weblogic/servlet/internal/ServletOutputStreamImpl.writeStream(ServletOutputStreamImpl.java:515)[inlined]
at weblogic/servlet/internal/ServletOutputStreamImpl.writeStream(ServletOutputStreamImpl.java:503)[inlined]
at weblogic/servlet/FileServlet.sendFile(FileServlet.java:410)[inlined]
at weblogic/servlet/FileServlet.doGetHeadPost(FileServlet.java:234)[optimized]
at weblogic/servlet/FileServlet.service(FileServlet.java:173)[optimized]
at javax/servlet/http/HttpServlet.service(HttpServlet.java:820)[optimized]
at weblogic/servlet/internal/StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)[optimized]
at weblogic/servlet/internal/StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)[inlined]
at weblogic/servlet/internal/ServletStubImpl.execute(ServletStubImpl.java:292)[optimized]
at weblogic/servlet/internal/TailFilter.doFilter(TailFilter.java:26)[optimized]
at weblogic/servlet/internal/FilterChainImpl.doFilter(FilterChainImpl.java:42)[optimized]
at com/github/inspektr/common/web/ClientInfoThreadLocalFilter.doFilter(ClientInfoThreadLocalFilter.java:46)[optimized]
at weblogic/servlet/internal/FilterChainImpl.doFilter(FilterChainImpl.java:42)[optimized]
at org/springframework/web/filter/CharacterEncodingFilter.doFilterInternal(CharacterEncodingFilter.java:88)[inlined]
at org/springframework/web/filter/OncePerRequestFilter.doFilter(OncePerRequestFilter.java:76)[optimized]
at weblogic/servlet/internal/FilterChainImpl.doFilter(FilterChainImpl.java:42)[inlined]
at weblogic/servlet/internal/WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3496)[optimized]
at weblogic/security/acl/internal/AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)[optimized]
at weblogic/security/service/SecurityManager.runAs(Lweblogic/security/acl/internal/AuthenticatedSubject;Lweblogic/security/acl/internal/AuthenticatedSubject;Ljava/security/PrivilegedAction;)Ljava/lang/Object;(Unknown Source)[inlined]
at weblogic/servlet/internal/WebAppServletContext.securedExecute(WebAppServletContext.java:2180)[inlined]
at weblogic/servlet/internal/WebAppServletContext.execute(WebAppServletContext.java:2086)[optimized]
at weblogic/servlet/internal/ServletRequestImpl.run(ServletRequestImpl.java:1406)[optimized]
at weblogic/work/ExecuteThread.execute(ExecuteThread.java:201)[inlined]
at weblogic/work/ExecuteThread.run(ExecuteThread.java:173)[optimized]
at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
-- end of trace
Scan Dump Helper:
Processing references from a Thread Stack Roots workchunk, with data: 0x2aaaf8f24aa0.
The thread being processed has tid 6407 and name "[STANDBY] ExecuteThread: '11' f".
No objIter registered, this is probably a root reference.
"(GC Main Thread)" id=3 idx=0xc tid=26918 lastJavaFrame=0xfffffffffffffffc
Stack 0: start=0x2aaaeb68c000, end=0x2aaaeb6d0000, guards=0x2aaaeb691000 (ok), forbidden=0x2aaaeb68f000
Thread Stack Trace:
at mmSingleConProcessWorkChunk+230()@0x2acd29b13ef6
at mmSingleConProcessThreadRoots+62()@0x2acd29b1415d
at mmSingleConMark+379()@0x2acd29b147bd
at mmMark+82()@0x2acd299c5201
at mmGCMainLoop+101()@0x2acd299c52a6
at mmGCMainThread+51()@0x2acd29a02a02
at tsiCallStartFunction+67()@0x2acd29a7d84f
at tsiThreadStub+308()@0x2acd29a7ea59
at ptiThreadStub+14()@0x2acd29ae6db6
at start_thread+199()@0x332c0064a7
-- Java stack --
Extended, platform specific info:
libc release: 2.5-stable
Elf headers:
libc ehdrs: EI: 7f454c46020101000000000000000000 ET: 3 EM: 62 V: 1 ENTRY: 000000332b41da90 PHOFF: 0000000000000040 SHOFF: 00000000001a22e8 EF: 0x0 HS: 64 PS: 56 PHN; 10 SS: 64 SHN: 77 STIDX: 76
libpthread ehdrs: EI: 7f454c46020101000000000000000000 ET: 3 EM: 62 V: 1 ENTRY: 000000332c005790 PHOFF: 0000000000000040 SHOFF: 0000000000022fe0 EF: 0x0 HS: 64 PS: 56 PHN; 9 SS: 64 SHN: 39 STIDX: 38
libjvm ehdrs: EI: 7f454c46020101000000000000000000 ET: 3 EM: 62 V: 1 ENTRY: 000000000002def0 PHOFF: 0000000000000040 SHOFF: 0000000002530a18 EF: 0x0 HS: 64 PS: 56 PHN; 3 SS: 64 SHN: 30 STIDX: 27
* If you see this dump, please go to *
* http://edocs.bea.com/jrockit/go2troubleshooting.html *
* for troubleshooting information. *
===== END DUMP ===============================================================You are running jrockit (BEA JRockit(R) R27.6.5-32_o-121899-1.6.0_14-20091001-2113-linux-x86_64), but you have
some Sun JVM parameters
-XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=128m
These are ignored by jrockit, but should not be in your start script.
Maybe this could be causing the issue
-agentlib:jprofilerti=port=8849,nowait,id=107,config=/opt/jprofiler5/config/config.xml -Xbootclasspath/a:/opt/jprofiler5/bin/agent.jar
If you want to profile your environment and you are using jrockit, you can use jrockit mission control:
http://download.oracle.com/docs/cd/E15289_01/index.htm -
I jus puchased an airtel 3g connection in india and the software that comes bundled with the huawei E1731 modem only supports upto snow leopard. I downloaded various drivers and installed them succesfully but the modem does not get detected. i am on lion 10.7.4 and a 2012 macbook air....how do i do this....please help...
hi, i was facing this problem from past few days...solution... WE JUST HAVE TO USE A USB 2.0 HUB... this solved my problem....E1713 is not able to connect to usb 3.0 as it does with 2.0.
-
Hi, Could anyone help me with variables in BEx
Hi,
I want to know what a Variable is,when and how it is used in BEx Reporting. I am aware that Variables are very important in BEx, but i don't know where to use it. I know how to create a query report,but where will i use this variables and how,while creating one.
Could anyone help me through this step by step.
With Thanks,
Siva.Hi Siva,
Please go through the info here. It is very helpful:
http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a56a7e09411d2acb90000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ac/789b3c4d4d8d15e10000000a114084/content.htm -
Problem during loading, could anyone help !!!
I am trying to Load a Masterdata(flatfile) in a infoobject.
This is what i did:
I created a infoobject name 'EMPNAM' with some attributes, like [soc_sec, 0city,0country].
I created and activated communication struct , and Transfer struct.
Created my own flatfile(.csv) with some fake datas.
created infopackage and loaded the flatfile, system generated as loading successful. I checked the datas in PSA and i was able to see all the fields ['EMPNAM, soc_sec, 0city,0country] been loaded.
When i try to see the loaded data in the datatarget i.e the infoobject, i could only see the 'EMPNAM' been loaded, not the attributes[soc_sec,0city,0country].
Why is that, could anyone help me with this please.Hi,
I have read your question and all the responses. If the Infoobject is not listed in the Attribute Change Run, the only other reason could be that data is not loaded into the object itself. I read that you have loaded into PSA. Did you process the data manually into the Infoobject.. or did you just do a simulation. Simulation would not load the data. For making sure, please run Infopackage once again using Option No. 1 on the Processing tab of the Infopackage. That way you would be sure the data is processed till the data target.
rgds
naga -
(The iPhone "Named" cannot be restored at this time because the iPhone software update server could not be contacted or is temporarily unavailable.)
can anyone help me with this issue, every time i try to restore it will come up like this error message.Restore the iPhone when connected to iTunes by cable.
Still the same TS1275?
Is your iPhone jailbroken?
Or
Has your computer ever been used to jailbrake or downgrade (Tinyumbrella) any iPhone? -
there is no rt.jar in java lib could anyone help me downloading it ,or tell me where is this rt.jar, there is no rt.jar in java lib could anyone help me downloading it ,or tell me where is this rt.jar
thx for your suggestion ..but i did try to skip my code..but i am sure if u guy understand what i am trying to ask ..so i try to show my all program for u guy better undrstand my problem ...the first three paragraph of code i hope u guy could focus on it ....i try ask the user to input the cd`s title to our insert list by using a function call readString( ) and i use this method to ask the user what cd they want to be delete from the list ...but it doesn`t work when i try to perform the delete cd funtion. At first, i think it should be my deleteCd( ) problem ..but i do some testing on it..it works fine if i pass a String directly to my function instead of using readString() function to perform ...therefore, i am sure my delete function working fine....i am thinking if it is my readString() problem make my deletion does not perform well...thx for u guy help
-
Could anyone help me out with this please?
Hi all,
I have always had a little problem messing with gradients, when creating images using them I tend to try and make things to perfect and then get very frustrated. This is the case again today
I have attached two images, one light and one darker. Could anyone help me out recreating these using FW please?
I am not after the letters in the center, I am just trying to create the background and the floor of the image with all its gradients and shadows.
Any help greatly appreciatedNo I don't, never heard of that
-
Can anyone Help me with this message? We could not complete your itunes store request an uknown error occurred (-1201)?
You have to unplug your ipod and reload the page.
-
I already update my os to ios7 but the panorama wallpaper is not working, i try to use before the ios7 beta, the panorama is working. Why in this ios7 is not working. Could anyone help me????? Thanks
That's odd.
Try this: Unplug your Time Capsule and your router. On your MBP, click the Wi-Fi icon and select "Open Network Preferences".
Click the lock icon to authenticate, then click the "gear" and select "set service order". Wherever AirPort (or Wi-Fi - I forget what Snow Leopard calls it) appears, drag it elsewhere in the list. Click OK, then Apply, then power up your router and TC.
If that doesn't result in any change, repeat the above but try making the service(s) you do not need "inactive".
The purpose of this is to reset or at least change your Network Preferences, which somehow got confused upon upgrading to SL.
Maybe you are looking for
-
Sorry does not make up for this purchase!
Since corporate wouldn't give me an email to send this to, I'm posting this here. Original-Recipient:{removed per forum guidelines} Final-Recipient: {removed per forum guidelines} Action: delayed Status: 4.4.7 Will-Retry-Until: Sat, 10 Jan 2015 21:
-
My Mac Book Pro does not recognize the presence of a DVD or CD
Ever since I upgraded my MacBook Pro, it does not recognize a DVD or CD of any type when I put it in. I have a store bought DVD, the Social Network, which worked fine before upgrading to OSX operating system. Music CD's were okay then, too. Now, neit
-
Hi all, I have a simple question, well hopefully. I installed xamp to preview files locally. i have 5 websites my problem is if website 1 is defined as C:\Program Files\xampp\htdocs\website1\ then it wont preview correctly however if i define it as C
-
RemoteApp displays wrong icon con client side
Hello, I'm currently implementing a Windows 2008 R2 terminal server farm (balanced using NLB). I've configured the remoteApp feature to publish a couple of program for our users. The program is launched throu a .CMD file which first map a network sha
-
How to remove adobe bridge from menu
Every time I click folder and it automatic open adobe bridge which I dont want to open the program, all I want to open the folder. I have to click right mouse to open the folder instead of double click on the folder.. How can I remove it?