Could I use full development version to make a .exe file?

Hi...
I am using a full development version LV 8.0 to program now.
The problem is obviously I do not have application builder to create the .exe file of my program.
Is there any other way to solve this problem with my current version?
Or is it possible to use the other language to handle it?
Thank you!

You can buy the app builder as an add-on. You can pay someone with the app builder to build one for you. Probably won't be too expensive for a one-time deal but it would be harder for you to support it. It's possible to create a "loader" program that will run a VI. If you can get someone to build the loader program, you can then distribute your application as an llb. There is no other way.
"the other language"? What other language?

Similar Messages

Old version Source code to .exe file conversion

I have a programming GUI source code (written in an older version of LabVIEW). Can it be supported by LABview Evaluation version 10.0.1 and be converted to an .exe file. How can I convert and use source code file for programming? What do I need to convert and how?
I'm new to LABview. Please help!!

2010 can open VIs written in LabVIEW 6.0 or newer. Just double click on the top level VI. You will also need to install any hardware drivers (i.e. GPIB, DAQ, etc) that the old program used.
With the evaluation version, you can create an exe but it will have a watermark on the front panel.

"create aac version" only makes another .m4a file...

I am trying to use the "Create AAC Version" (right click on album) to create some files for playing in the car. When I select that option in the dropdown I find iTunes does indeed create a copy of the songs on the album but the file extension is duplicated to .m4a (same as original) and not .acc
Would appreciate any insight into what's going on here or what I'm doing wrong.
Thanks!

m4a is aac, it's just Apple's way of naming it. Change the extension to .aac if your car demands it but I am not sure how iTunes will react. If it is tons of files you can probably find an online bulk re-namer (I use a free one but they charge for it now with newer OSX versions).

Can you make an exe file for a slide show using PS Elements?

Although I use ProShow Gold for slide shows, I need information on other programs that can provide an option for an exe format. I am not too technical so I can't tell from my Elements and couldn't find anything here. I will be running a competition in which exe files are needed so they can be played on any computer. I would appreciate any suggestions. Thanks.

judyb429 wrote:
I will be running a competition in which exe files are needed so they can be played on any computer. I would appreciate any suggestions.
I hope your competition goes well. I suggest though that you thoroughly scan each submitted file for virus and malware on an isolated machine first. While not suggesting your competitors would deliberately infect their entry but if their own machines were unknowingly infected by (say) a trojan that could potentially infect the executables they create for your competition.
If it was me I'd request files in a standard format (e.g. WMV) that is readable by just about any media playing software such as Windows Media Player.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Version number incorrect in .exe file properties

Just reporting a little glitch in version 9.3.4, just installed here. When I run the program, "Help; About" says that it's version 9.3.4 as expected. But the version number reported in the properties of AcroRd32.exe is still 9.3.3.177

snofriacus wrote:
Just reporting a little glitch in version 9.3.4, just installed here. When I run the program, "Help; About" says that it's version 9.3.4 as expected. But the version number reported in the properties of AcroRd32.exe is still 9.3.3.177
Agreed. Software compliance scanning systems (like Retina) are scanning to make sure that the exe file was updated from 9.3.3 to 9.3.4. Since the expected file was not updated, it beleives there's still an open vulnerability and flags the system as non-compliant (which in very strict IT/system environments can cause the users computer to be taken off-line until it is remediated).
--KC

Can I call .m files from a LabVIEW executable without the full development version of matlab installed?

I have an executable that I am trying to build (and distribute). Right now, it has Matlab script nodes that call some matlab .m scripts that someone else wrote. The target PC will not have the full development version of Matlab installed. Would that work? I have tried to compile the .m scripts into a DLL, but I can't import that to LabVIEW because of the special Matlab types (*mxArrays). I have also tried to write a wrapper around that DLL, but with no success. So now I'm wondering if I can either call the Matlab .m scripts directly from a Matlab Script node OR if I can call my Matlab DLL from within a script node. OR any other idea someone might have...
Thanks a lot!
-Matt Bradley
************ kudos always appreciated, but only when deserved **************************

Simon,
I looked at MathScript and am considering using it, but one thing that is not clear to me is if I will be able to use my .m files like I can with Matlab. I call the same Matlab script repeatedly and it keeps track of some information in global variables (for example, the number of consecutive detections). Can I do that entirely within mathscript or would I have to reload all of the info each time -- if I had to do that, it would mean substantial changes to the .m files ... and that's not an option.
-Matt
-Matt Bradley
************ kudos always appreciated, but only when deserved **************************

Versioning of fla and swf files

Hi there,
I am working on a small flash project with one other
developer and we email fla and swf files back and forth. So far
date/time stamps and file sizes have been good enough for "version
control".
I am familiar with versioning systems for development but
what about after a release? How can I determine a released swf
file's build version? Date/time stamps can change with copying and
development could have already progressed and multiple version of
the same swf file are out there...
I am surprised that there isn't a built in mechanism to
assign a version number to a fla/swf file (e.g. as part of the
publish profile) that one can then view via the files properties
dialog... or perhaps somebody has to show me the light... :)
Does anybody have a recommendation on how to give a fla/swf
file a version number that can be checked once the file has been
released?
Thanks,
Dan

.. or, Plan B), use QuicktimeX' ability of Screen-Recordings to record while you playback those files in their app.
The resulting mov can be treated as any other movie in iMovie.
Vector-graphics, interactive formats, etc are of no use in an video-editor ...

How to run exe files using peoplecode?

How to run .exe extension files using peoplecode. It should execute on clicking a button.can anyone provide sample peoplecode for the same.
where do i place the exe files ? Local workstation or Server or FTP?
can i use the same peoplecode if i'm using a button on grid.

1. You can use function Exec in PeopleCode to run any exe file
2. You can use ViewContentURL function in PeopleCode to view any .pdf or .doc documents
Jayaprakash Tedla

Use acrobat 8 in a shellscript and make a pdf file OCR recognize text with selected language

Hello everybody !
I have a little problem and I don't know how to overcome this...
I want to use a shellscript and call acrobat.exe and open a pdf file (up till now I've done this..), but the difficult part is that I want in this shellscript to use parameters/switches in order to make the pdf file OCR text recognized and use selected language e.g greek !!!!
How can i do that?
What is the command prompt parameters...?
In command line when i use
c:\> cd C:\Program Files\Adobe\Acrobat 8.0\Acrobat
C:\Program Files\Adobe\Acrobat 8.0\Acrobat> acrobat.exe <pdffile>
it opens the pdf file in the acrobat....
So what switches do I have to insert next?
Thanks a lot in advance !!!!

Microsoft has released a hot fix that supposedly addresses this issue, it is at
http://support.microsoft.com/kb/977468
I downloaded the fix and tried it; it actually made the problem worse! Apparently they
are trying to fix their filter rather than bypassing it. What I am doing is
1. Making maps in AutoCaD Map and printing (plotting in autocad) them to a pdf file
2. Opening the pdf file in Acrobat and resaving it as eps
3. Importing the eps file into a Word 2007 document
4. Use Acrobat to convert the Word document to pdf
Before the hot fix when I did the process the resolution of the map in the final
pdf file was not as good as in the original made from AutoCad. Also the colors were
not correct. After installing the hotfix there are still these same problems but also now
any non horizontal text is not displaying correctly.
Be careful about trying this hotfix.
As others have noted, back in Word 2003 the above steps 1 - 4 worked very well and resulted
in a high quality pdf file with the map as good as in the original pdf.

How do I get my videos to upload from my sony handy cam when I get the message The following file could not be imported. The file is in an unrecognized format. I am using a macbook pro version 10.9.3, I have 411 gb free space, it worked before I updated

How do I get my videos to upload from my sony handy cam when I get the message The following file could not be imported. The file is in an unrecognized format. I am using a macbook pro version 10.9.3, I have 411 gb free space, it worked before I downloaded the latest update for iphoto.

You may be able to download and install the update from here: Digital Camera RAW Compatibility 6.01
If I upgrade to Yosemite will I be forced to go to the new Photos program
No. After upgrading (and of course make a back up first) you will need to update iPhoto to v9.6.1 (you won't be able to do this prior to upgrading). Here's how:
Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.
Photos is v1 of a new app, as yes it's not as mature as iPhoto. It uses a different technology for working with external editors. That requires Adobe to write an extension to let it hook into the new app. Not done yet, neither has anyone else.
Going forward: iPhoto will run on OS 10.10., but there is no guarantee for subsequent versions of the OS. You might want to factor that into your anger term thinking.

Good night, I am just starting in bussines design, i am not rich enough to buy photoshop license, but i'm loved to use photoshop, could i use photoshop cs2 for free version? Thanks alot for your attention.

Good night, I am just starting in bussines design, i am not rich enough to buy photoshop license, but i'm loved to use photoshop, could i use photoshop cs2 for free version? Thanks alot for your attention.

There is no free version of CS2. There is only a special version of CS2 available for people who purchased it and need to reinstall it.

I have bought a iphone 4s from uk. but i face problem in using sim on it. this is updated with 6.0.1 version. this phone also hve a chip in sim plate. now how could i use it?

i have bought a iphone 4s from uk. but i face problem in using sim on it. this is updated with 6.0.1 version. this phone also have a chip in sim plate. now how could i use it?

Where did you purchase in UK and is the iPhone carrier locked ??

Could not use color replacement tool because it only works in full color mode: Elements 11

I have a PSD file open and I added a new layer via the copy command. I have added a Layer Mask to the new layer and I'm trying to use the Brush Tool with black forground to cover part of the new layer. I'm following an online tutorial step by step, but when I try to use the Brush Tool I get "could not use color replacement tool because it only works in full color mode". The Image>Mode is set to RGB. I'm stuck!

First, show the tools optiond in the bottom of the screen (shortcut F4)
Now look at which of the three options you can select, brush, impressionist brush or replacement tool. I suspect you have to select the brush.
Edit:
The reason of the message is that when you are painting on a mask you are in greyscale mode for the mask. For instance, if you paste a coloured layer into a mask, it will be converted to greyscale.

I have Version 10.6.8 Mac OS X ; could I use iCloud on my MacBook?

I have Version 10.6.8 Mac OS X ; could I use iCloud on my MacBook?

If your MBP supports it (http://www.apple.com/osx/specs/) you can purchase OS X 10.8 Mountain Lion from the Mac App Store. If you do make sure you have current backups before installing the OS upgrade.

I bought the Labview2013 Chinese version, Could I use this lisence to instal Labview 2013 English Version?

Hello,
I bought the Labview2013 Chinese version, Could I use this lisence to instal Labview 2013 English Version?
Thanks!

Yes.
You can always discuss licensing issues with your local NI representative!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Could I use full developmen​t version to make a .exe file?

Similar Messages

Maybe you are looking for

Could I use full development version to make a .exe file?