Could not find type error - unknown or missing type

Hello,
I have a sequence file created on the TestStand 3.5 version (running on winXP which I don't have at the moment) and I'm trying to use this sequence on my TestStand 4.2 (running on Win7).
The error is (see attached picture) Could not find type 'XML_POPUP' ,unknown or missing type.
I have tried adding a type named XML_POPUP to the MyTypes.ini->Step Types.
Is there a way to load the sequence without a type, I only need to see the steps and extract data for the new sequence I'm building.
I can also view the code of the sequence in NOTEPAD++ , is there a way to extract the data using the this code?
Thank you,
Lev
Attachments:
Capture.JPG ‏34 KB

Hi,
I have found an .ini file containing the XML_POPUP step type (as seen in the attached picture).
When I'm trying to load the sequence I receive the same error, that the 'XML_POPUP' type is not found.
After loading the .ini file as seen in the picture, do I need to configure something else for the sequence I'm trying to load to locate this type?
Thank you,
Lev
Attachments:
Capture.JPG ‏133 KB

Similar Messages

Could not find file ERROR while connecting to access (mdb) file

I am getting the following error while connecting to the database:
javax.servlet.ServletException: [Microsoft][ODBC Microsoft Access Driver] Could not find file 'C:\WINNT\system32\Database1.mdb'.
Following is my code:
<%
     Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
     String database="jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=";
     String filename="D://BeaTemp//Database1";
     database+= filename.trim() + ";DriverID=22;READONLY=true}";
     Connection con=DriverManager.getConnection(database, "", "");
     Statement st=con.createStatement();
     ResultSet rs=st.executeQuery("select * from Database1.Employee");
     ResultSetMetaData rsmd=rs.getMetaData();
     while(rs.next()){
          for(int i=1;i<=rsmd.getColumnCount();i++) {
               out.println(rs.getString(i));
%>
What could be the problem..??
Thankx in advance..
Satish.

Got the solution.
The statement:
ResultSet rs=st.executeQuery("select * from Database1.Employee");
should be changed as:
ResultSet rs=st.executeQuery("select * from Employee");
Now, it is working fine.
Regards,
Satish.

"Could not find RAID" error in Disk Utility

Hello,
I could really use some help as this problem is causing me lots of headaches. I have two 500GB MyBook hard-drives connected to my MacBook Pro via two USB's. I had them setup as a mirrored RAID, and they were working properly for quite sometime. However over the past few weeks I noticed they were always in a degraded state, and Disk Utility would always rebuild them. However after the rebuild they would still have the status of "Degraded" and the next time Disk Utility opened it would start the rebuilding process yet again.
So I moved all the data on the drives to a backup, and I stopped the mirrored RAID. After erasing the data on the drives individually I attempted to setup the mirror again. However after the mirror had just about finished, and it was to the point of "bringing the RAID online" I always get an error that states "Creating RAID set failed", "Creating RAID set failed with the error: Could not find RAID.".
I'm hoping someone smarter than myself in this area can lend me some time and assistance to solving this issue.
Thanks,
Paul

Well. No one really came to my rescue with this question. Turned out to be a Finder issue. After reinstalling the operating system everything started working again with Disk Utility.
Later,
Paul

OseException (-12021) Could not find snapshot error during synchronization

I have successfully deployed mobile adf client to blackberry simulator.
When I started the application first time, it synchronized the data without any errors.
But, in subsequent synchronizations, it shows the following error
oseException (-12021) Could not find snapshot with id 133.
Any help would be highly appreciated.

I have successfully deployed mobile adf client to blackberry simulator.
When I started the application first time, it synchronized the data without any errors.
But, in subsequent synchronizations, it shows the following error
oseException (-12021) Could not find snapshot with id 133.
Any help would be highly appreciated.

Edge Animate could not find .html error message

I have a series of animate files that I have created. When I try to open the files to make edits, this error message appears:
All of the files are in the same folder, and I have not changed any file names or coding outside of animate. I can open the .html file and edit that, but when I go to save or publish, I get this message:
I've seen the first message on a couple of discussion threads, but it didn't really seem to resolve the initial problem. I'd love it if someone had a fix for this.

Hey guys,
Sorry for the trouble you're running into -- maybe check these few things.
Are you trying to open a published file? Only the original .html file can be opened with Animate; the published files aren't runtrippable.
Has the .an or associated .html file been renamed? Have any of the dependant folders or files been renamed? The naming used when saving needs to remain in tact. In the future we're looking to loosen this restriction, but if you rename the .html or .an Animate will barf when you try and open.
Is the file saved in a locked folder? Permission issues can arise if you have restrictions placed within the OS. If you're not sure where to look for this, Here's an article on how to change permissions on Windows. Be sure to check the directory you're saving to and publishing to. A quick test might be to copy the entire AN project/files onto a conventionally unlocked folder like the desktop and try running from there.
For the users in this thread: Can you describe your operating system, and where your files are being saved and where Animate is installed? For example C:\Windows\Blah\Programs
Thanks,
Sarah

"Could Not Find Key" error when trying to download iTunes 7

Everytime I try to install iTunes 7, it gets about half way done and then says that it cannot find some sort of key (HKEYLOCALMACHINE\Software\Classes\QuickTime.QuickTime\CLSID is the full text FYI). I have no clue what this means since I'm a far cry from a computer whiz. Any help would be awesome.

Here you go, this should do it.
http://support.microsoft.com/kb/2258121

Visio Shapes "Could not find match" Error

I upgraded to office 2010 just this past week, and after the upgrade I noticed I could no longer search for shapes in Visio 2007. I tried a repair. I re-indexed everything in the Indexing Options in the control panel. I uninstalled reinstalled. and
then I upgraded to Visio 2010 and aboslutely nothing has worked to fix this issue. please advise

If the shape search is no longer supported, why is there a search edit control under shapes?
Shape search is still supported. Internet shape search is no longer available.
Mind you, when shapes are found the shape search display is really badly broken. The display used to show which stencil the shapes had been found in (which was very, very useful because it gave you a clue to where other similar shapes might be found), but
now it's just a list of shapes with duplicates (and you have no idea which is metric and which is US units. Yes, I know the information is available if you do <shape>right-click -> properties, but that isn't the point.
Paul Herber, Sandrila Ltd. Engineering and software shapes for Visio
Sandrila Ltd

Need help in finding the root cause the error 'Could not find function:'

Hi fokls,
In my workflow notification , when I click on the notification to process it , it says ' 'Could not find function:' error.
I found the this message is coming out from the Fnd_new_messages table from the message_name 'FND_FUNCTION_NOT_FOUND'.
Here are my questions ...
1. FND_FUNCTION_NOT_FOUND - Is it a oracle Seeded message ?
2. If so the error I am getting is a oracle product Bug ?
And In between , I am getting this error for few transaction only. ( out of 100 , i am getting this error at the rate of 5 per 100 ... or less)
3 .If its a oracle product bug then , how is 95 out of 100 transaction are succssfully wokring ?
4. If is a custom bug , how it os not though for some other 95 transaction ?
5. Can I expect it as Data issue ? If so what kind of data issue.
Folks , any kind of info will be really , realy helpful for me ... please let me know your inputs for me.
Thansk to all in advance
Raghu

In the error message 'Could not find function:' after colon what function name it is giving.
'FND_FUNCTION_NOT_FOUND' is a seeded message only.
As you are saying the error was throwing only for 5% or less notifications, is the error throwing for same kind of notifications? I mean the item type and message are same for these erroneous notifications?
It can be that some function in particular type of workflow is error-ed out does not exists, when responding to those kind of notifications it might be throwing error.
Please check that.
Edited by: sarojak on Nov 12, 2010 6:16 AM

Could not find registry for CommunicationsApp_JBOServiceRegistry

Hi,
I have an SDO running at
http://localhost:7101/CoreModelApp-CommunicationsSDO-context-root/CommsAppModuleService
The application name in JDeveloper is CommunicationsApp though, so I believe that is the name i should be using?
The web-application.xml for my SDO contains the oracle.jbo.client.svc.ADFApplicationLifecycleListener already, and the composite which references the SDO contains :
<reference name="CommunicationsSDO" ui:wsdlLocation="http://localhost:7101/CoreModelApp-CommunicationsSDO-context-root/CommsAppModuleService?wsdl">
<interface.wsdl interface="/ybs/poc/app/sdo/communications/common/#wsdl.interface(CommsAppModuleService)"/>
<binding.adf serviceName="{/ybs/poc/app/sdo/communications/common/}CommsAppModuleService" registryName="CommunicationsApp_JBOServiceRegistry"/>
I continuously get the 'Could not find registry' error whenever I call the service from enterprise manager.
How do I make sure I have the correct registry name? Or is my problem something to do with my SDO running on JDevelopers Integrated WebLogic Server whilst my service references it from an independent WebLogic installation?
Any help on this would be much appreciated.
Thanks,
Alex

Hi,
most probably that means you are trying to use command (in some command group or so) which does not exist or is wrongly registered with different alias. It should be logged in the error message what is the alias it can not find.
Best,
--epexpert

Deserializer error : could not find deserializer for type

Hi folks,
I am trying to send a XML file in web service request and trying to get the same back, I am getting the following exception while trying to do this,
org.xml.sax.SAXException: Deserializing parameter 'echo': could not find deserializer for type {Echo}echo
AxisFault
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException
faultSubcode:
faultString: org.xml.sax.SAXException: Deserializing parameter 'echo': could not find deserializer for type {Echo}echo
faultActor:
faultNode:
faultDetail:
     {http://xml.apache.org/axis/}hostname:localhost
org.xml.sax.SAXException: Deserializing parameter 'echo': could not find deserializer for type {Echo}echo
     at org.apache.axis.message.SOAPFaultBuilder.createFault(SOAPFaultBuilder.java:222)
     at org.apache.axis.message.SOAPFaultBuilder.endElement(SOAPFaultBuilder.java:129)
     at org.apache.axis.encoding.DeserializationContext.endElement(DeserializationContext.java:1087)
     at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.endElement(Unknown Source)
     at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unknown Source)
     at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDriver.next(Unknown Source)
     at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(Unknown Source)
     at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(Unknown Source)
     at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
     at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
     at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
     at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(Unknown Source)
     at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(Unknown Source)
     at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$JAXPSAXParser.parse(Unknown Source)
     at javax.xml.parsers.SAXParser.parse(Unknown Source)
     at org.apache.axis.encoding.DeserializationContext.parse(DeserializationContext.java:227)
     at org.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:696)
     at org.apache.axis.Message.getSOAPEnvelope(Message.java:435)
     at org.apache.axis.handlers.soap.MustUnderstandChecker.invoke(MustUnderstandChecker.java:62)
     at org.apache.axis.client.AxisClient.invoke(AxisClient.java:206)
     at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
     at org.apache.axis.client.Call.invoke(Call.java:2767)
     at org.apache.axis.client.Call.invoke(Call.java:2443)
     at org.apache.axis.client.Call.invoke(Call.java:2366)
     at org.apache.axis.client.Call.invoke(Call.java:1812)
     at com.sel.services.EchoRequest.main(EchoRequest.java:42)
The following is my client code,
import javax.activation.DataHandler;
import javax.activation.FileDataSource;
import javax.xml.namespace.QName;
import javax.xml.rpc.ParameterMode;
import org.apache.axis.client.Call;
import org.apache.axis.client.Service;
import org.apache.axis.encoding.ser.JAFDataHandlerDeserializerFactory;
import org.apache.axis.encoding.ser.JAFDataHandlerSerializerFactory;
public class EchoRequest {
      * @param args
     public static void main(String[] args) {
          try {
                    String endpoint = "http://localhost:8080/axis/Echo.jws";
                    Service service = new Service();
                  Call     call    = (Call) service.createCall();
                  call.setTargetEndpointAddress( new java.net.URL(endpoint) );
                  call.setOperationName(new QName(("Echo"),"DataHandler"));
                  QName qName = new QName("Echo" , "echo");
                  DataHandler dhSource = new DataHandler(new FileDataSource("D:/Workspace/Sandbox/Request.xml"));
                  call.registerTypeMapping(dhSource.getClass(),qName,JAFDataHandlerSerializerFactory.class,JAFDataHandlerDeserializerFactory.class );
                  call.addParameter("echo", qName , ParameterMode.IN);
                  call.setProperty(call.ATTACHMENT_ENCAPSULATION_FORMAT, call.ATTACHMENT_ENCAPSULATION_FORMAT_MIME);
                  call.setReturnType(qName);
                  Object ret = call.invoke(new Object[] {dhSource});
                    System.out.println();
                } catch (Exception e) {
                  System.err.println(e.toString());
                  e.printStackTrace();
     }The following is my jws,
import java.io.Serializable;
import javax.activation.DataHandler;
public class Echo implements Serializable{
     public DataHandler echo(DataHandler echo){
          return echo;
}The following is my deploy.wsdd,
<deployment     xmlns="http://xml.apache.org/axis/wsdd/"
                       xmlns:java="http://xml.apache.org/axis/wsdd/providers/java"
                       xmlns:ns1="Echo">
     <service name="Echo" provider="java:RPC">
             <parameter name="className" value="Echo"/>
          <parameter name="allowedMethods" value="echo"/>
          <operation name="echoString" returnQName="returnqName" returnType="ns1:DataHandler">
                 <parameter name="echo" type="ns1:DataHandler"/>
         </operation>
          <typeMapping deserializer="org.apache.axis.encoding.ser.JAFDataHandlerDeserializerFactory"
               languageSpecificType="java:javax.activation.DataHandler" qname="ns1:DataHandler"
                  serializer="org.apache.axis.encoding.ser.JAFDataHandlerSerializerFactory"
              encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
     </service>
</deployment>And following is my server-config.wsdd,
<?xml version="1.0" encoding="UTF-8"?>
<deployment xmlns="http://xml.apache.org/axis/wsdd/" xmlns:java="http://xml.apache.org/axis/wsdd/providers/java">
<globalConfiguration>
<parameter name="sendMultiRefs" value="true"/>
<parameter name="disablePrettyXML" value="true"/>
<parameter name="adminPassword" value="admin"/>
<parameter name="attachments.Directory" value="D:\ApacheTomcat5.5.26\webapps\axis\WEB-INF\attachments"/>
<parameter name="dotNetSoapEncFix" value="true"/>
<parameter name="enableNamespacePrefixOptimization" value="false"/>
<parameter name="sendXMLDeclaration" value="true"/>
<parameter name="attachments.implementation" value="org.apache.axis.attachments.AttachmentsImpl"/>
<parameter name="sendXsiTypes" value="true"/>
<requestFlow>
   <handler type="java:org.apache.axis.handlers.JWSHandler">
    <parameter name="scope" value="session"/>
   </handler>
   <handler type="java:org.apache.axis.handlers.JWSHandler">
    <parameter name="scope" value="request"/>
    <parameter name="extension" value=".jwr"/>
   </handler>
</requestFlow>
</globalConfiguration>
<handler name="LocalResponder" type="java:org.apache.axis.transport.local.LocalResponder"/>
<handler name="URLMapper" type="java:org.apache.axis.handlers.http.URLMapper"/>
<handler name="Authenticate" type="java:org.apache.axis.handlers.SimpleAuthenticationHandler"/>
<service name="AdminService" provider="java:MSG">
<parameter name="allowedMethods" value="AdminService"/>
<parameter name="enableRemoteAdmin" value="false"/>
<parameter name="className" value="org.apache.axis.utils.Admin"/>
<namespace>http://xml.apache.org/axis/wsdd/</namespace>
</service>
<service name="Version" provider="java:RPC">
<parameter name="allowedMethods" value="getVersion"/>
<parameter name="className" value="org.apache.axis.Version"/>
</service>
<service name="Echo" provider="java:RPC">
<operation name="echoString" returnQName="returnqName" returnType="ns1:DataHandler" soapAction="" xmlns:ns1="Echo">
   <parameter name="echo" type="ns1:DataHandler"/>
</operation>
<parameter name="allowedMethods" value="echo"/>
<parameter name="className" value="Echo"/>
<typeMapping deserializer="org.apache.axis.encoding.ser.JAFDataHandlerDeserializerFactory" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" qname="ns2:DataHandler" serializer="org.apache.axis.encoding.ser.JAFDataHandlerSerializerFactory" type="java:javax.activation.DataHandler" xmlns:ns2="Echo"/>
</service>
<transport name="http">
<requestFlow>
   <handler type="URLMapper"/>
   <handler type="java:org.apache.axis.handlers.http.HTTPAuthHandler"/>
</requestFlow>
<parameter name="qs:list" value="org.apache.axis.transport.http.QSListHandler"/>
<parameter name="qs:wsdl" value="org.apache.axis.transport.http.QSWSDLHandler"/>
<parameter name="qs.list" value="org.apache.axis.transport.http.QSListHandler"/>
<parameter name="qs.method" value="org.apache.axis.transport.http.QSMethodHandler"/>
<parameter name="qs:method" value="org.apache.axis.transport.http.QSMethodHandler"/>
<parameter name="qs.wsdl" value="org.apache.axis.transport.http.QSWSDLHandler"/>
</transport>
<transport name="local">
<responseFlow>
   <handler type="LocalResponder"/>
</responseFlow>
</transport>
</deployment>The following is the directory structure which I have in my tomcat for this service
- axis
-----WEB-INF
----------classes
----------jwsClasses
----------lib
----------deploy.wsdd
----------server-config.wsdd
I am really not sure where I am getting wrong. Please help me with this.
Thanks
Edited by: Jadaaih on Jun 19, 2008 1:52 AM

Ok, this may not be your problem, but I was getting this error as well.
I had multiple services running, and I was able to use SOAP test clients and connect to them and get responses, no problem.
I wrote some client code to connect to one, and it worked just fine.
Then I wrote some client code to connect to the other, and I got an error like
faultString: org.xml.sax.SAXException: Deserializing parameter 'initiateIn': could not find deserializer for type {urn:SOAPFulfillmentAPI}DoSomething
...I tore my hair out trying to figure out why a service that functions perfectly using other tests would fail in java. Then I realized I was pointing to the end point URL.
It looks like AJAX tries to deserialize the parameters before it does any of basic sanity check to see the method your looking for even exists (even in debug mode). So instead of getting a useful error like "Cant find method 'DoSomething' " you get some crap about not being able to understand the datatype for an arguement.
I hope this helps someone one day =)

Central Administraion Internal server error 500 | event id 5586 sharepoint foundation unknown sql exception 2812 could not find stored procedure dbo.proc_gettimerlock

Hi,
We have two SharePoint 2010 SP2 servers with one SQL 2012 Backend.
Recently we cannot open the central administration, getting 500 internal server error and multiple SQL errors in event viewer:
event id 5586 sharepoint foundation unknown sql exception 2812 could not find stored procedure dbo.proc_gettimerlock
event id 5586 sharepoint foundation unknown sql exception 2812 occured could not find stored procedure 'proc_fetchdocforhttpget'
Also I cannot run SharePoint configuration wizard, getting this error: sharepoint 2010 failed to resgister sharepoint services
In the log file, I found this error "an exception of type microsoft.sharepoint.spexception was thrown 0x80131904"
Any ideas?
Thanks, Shehatovich

As You can see below stored procedure has its specific Permission's, check user who is performing action as well as CentralAdministation Pool has right permission and their permissions are not modified from SQL Server.
-Samar
=
Sr. Software engineer

We could not complete your purchase - Unknown Error

When trying to update my apps, I get this error message:
We could not complete your purchase Unknown Error.
I've been getting this error for a week straight now.
I uninstalled some of the apps thinking that something was just corrupt, and now I cannot reinstall them (or buy any other app for that matter).
The authors of the apps no longer offer downloads from their individual sites so I'm in trouble here. I have to work tomorrow and I have lost the entire night trying to fix this. I have tried everything mentioned on this forum (signed out, reset safari, cleared the app store cache folder) and now I can't even sign out of the App Store. I click the "Welcome (myname)" and "Account" links and nothing happens.
I even tried restoring the system, but the last step said something like "you cannot update mac osx lion server, you must erase the hard drive first." But I didn't know I had OSX Lion Server. I just bought the Server app awhile back thinking it would let me deploy a MAMP development environment and then deleted it because it was a joke of an app.
So am I screwed or just missing something here?

Many Thanks for the info zkc75 it worked for me.
This if for those who dont know how to delete /folders from /var directory.
On Finder select Go, then Go to Folder type /Var, hit enter. You will now get to see all folders under /var.
Delete all the folders under folder.
Thanks,
Narayan

GP Preference Items Throwing "Could not find a part of the path" Error in GP Management Console

Hello,
For background, I recovered two Server 2008 R2 Domain Controllers in the same domain from a JRNL_WRAP_ERROR
using the BurFlags registry key as outlined in KB290762. The non-authoritative restore seemed to resolve NtFrs/replication challenges, as now the FRS and System logs are free from any major errors and "repadmin /showreps" output looks clean.
As part of the cleanup process I am going through and checking all the policy objects. Policy objects that leverage group policy preferences are
throwing an error when the settings are viewed in the management console:
The following errors were encountered:
An unknown error occurred while data was gathered for this extension. Details: Could not find a part of the path 'C:\Users\administrator.YOURDOMAIN\AppData\Local\Temp\2\ny0ho1ht.tmp'.
This occurs for existing Group Policy Preference objects and those that are newly created. It is important note if I go to edit the policy in question
the preference settings are available, it is viewing them in the management console that seems to be the issue. What concerns me here is that the file it is looking for is stored in the local temp directory and not the SYSVOL directory. With replication issues
behind me I am not sure how to address this last piece of the puzzle.
Any assistance in getting this squared away you be appreciated.
Thanks!
Jordan

DCDIAG /C outputs the following error in relation to the VerifyEnterpriseRefrences test:
Starting test: VerifyEnterpriseReferences
The following problems were found while verifying various important DN
references. Note, that these problems can be reported because of
latency in replication. So follow up to resolve the following
problems, only if the same problem is reported on all DCs for a given
domain or if the problem persists after replication has had
reasonable time to replicate changes.
[1] Problem: Missing Expected Value
Base Object:
CN=DC04,OU=Domain Controllers,DC=YOURDOMAIN,DC=local
Base Object Description: "DC Account Object"
Value Object Attribute Name: msDFSR-ComputerReferenceBL
Value Object Description: "SYSVOL FRS Member Object"
Recommended Action: See Knowledge Base Article: Q312862
[2] Problem: Missing Expected Value
Base Object:
CN=DC03,OU=Domain Controllers,DC=YOURDOMAIN,DC=local
Base Object Description: "DC Account Object"
Value Object Attribute Name: msDFSR-ComputerReferenceBL
Value Object Description: "SYSVOL FRS Member Object"
Recommended Action: See Knowledge Base Article: Q312862
LDAP Error 0x20 (32) - No Such Object.
I am evaluating the suggested KB now but am not sure it is related to the issue at hand but posted it for completeness.
All other tests pass.

Error: Could not find compiled resource bundle 'components' for locale 'en_US'

We are porting a fairly large body of Flex3 code developed under FlexBuilder 3 to Flex4 under FlashBuilder 4. Most of the conversion appears to be working fine, with one exception. When I launch the Flex4 version, all my data interchanges with the server works. Just as it is about to show the UI, the following error occurs:
     Error: Could not find compiled resource bundle 'components' for locale 'en_US'
I am actually using a locale of fr_FR, but I assume it couldn't find that, reverted to en_US, failed again and then barfed. If I look in
     ~Adobe Flash Builder 4\sdks\4.0.0\frameworks\locale\fr_FR
I see a lot of swc files, and of course no 'components.swc'. I believe the problem is that our Flex3 code is using mx components, and the compatibility mode is not properly handling it for some reason. I think this is mostly from our in-house UI library. The properties for that library (and for my main app I am testing now) have:
     - Use default SDK (currently "Flex 4.0")
     - Use Flex 3 compability mode
     - Use minimum version (Flash Player) required by the Flex SDK
     - Enable strict type checking
     - Enable warnings
I also tried putting the compatibility flag in the mxmlc compile line, with no change in behavior. This project is built by the following script:
ruby scripts/concat_properties.rb -o resources.properties ^
     src/main/flex/locale/fr_common/res_myname_fr_common.properties ^
     src/main/flex/locale/fr_common/scout/res_myname_scout_fr_common.properties ^
     src/main/flex/locale/fr_fr/res_myname_fr_fr.properties ^
     ../../scout/common/src/locale/fr_common/mypals/resources.properties
mxmlc -locale=fr_FR -source-path=. ^
     -compatibility-version=3.0.0. ^
     -static-rsls=true ^
     -include-resource-bundles=resources ^
     -output src/main/resources/bundles/mypals/fr_fr_resources.swf
copy src\main\resources\bundles\mypals\fr_fr_resources.swf ^
     bin-debug\bundles\mypals
What have I missed???

You have two posts. I will try to answer each completely. Second one first. You say I should change my build to include the framework resources. I am afraid I am not sure which and what to do there. We combine all our properties file into one large one, then use the following build line:
mxmlc -locale=fr_FR,en_US -source-path=. ^
     -compatibility-version=3.0.0. ^
     -static-rsls=true ^
     -include-resource-bundles=resources ^
     -output src/main/resources/bundles/mypals/fr_fr_resources.swf
I am assuming you are telling me to change the "-include-resource-bundles" line, but what to add? The "sdks\4.0.0\frameworks\locale\en_US" holds 13 swf files. I tried adding that entire folder (along with the fr_FR folder) to the project library path (in the project properties dialog), but that made no change. I also tried reverting the library path tab back to "MX Only" instead of "MX + Spark", but again no change.
====================
For your first message, I did a search for 'spark' in the entire project. It only existed on 3 lines, each at the start of css files:
    @namespace s "library://ns.adobe.com/flex/spark";
I had put those in based on reading needed changes to naming in CSS. Since I was not actually using any spark ('s') components yet, I removed these lines. The entire project now does not have the word 'spark' anywhere in it. No change in behavior (as I expected).
I did a search for "s:" throughout the project. That does exist in probably 100 places, but all are legitimate. Things like (xmlns:mx="http://www.adobe.com/2006/mxml") or variable names ("var matches:Object"). No reference to any s: object. (While on the topic, why does FlashBuilder still not have a "whole word" box to limit searches??).
Note that when I first reported this problem, the compiler was set to ONLY support fr_FR. In fighting this, I changed it to "en_US,fr_FR" hoping that would tell the compiler to load whatever en_US items it was looking for. We really do not want any English support in this version. (We do have another SWF created with only support for en_US, and another for en_UK, etc. Each language is a separate node on our server, so there is no need to mix & match at runtime)
The console shows a lot of swf loads that I do not understand...
The console output shows (my comments after ==> indicator)
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\myname.swf - 2,229,992 bytes after decompression
             ==> our locale is set here, after the above load and before the next line
Look for name file at: ./data/fr_fr/names.csv
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\myname.swf - 21,200 bytes after decompression
Loaded 2278 names.       ==> indicates successful load of data retrieved from server
Loaded 154 bad words     ==> our second data set has been retrieved and loaded
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 58,777 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 322,606 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\bundles\mypals\fr_fr_resources.swf - 595,025 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 202,168 bytes after decompression
    ==> not sure what this next warning means. I'm guessing I will later have to research it and return to 'secure' comm with server, but I'm ignoring for now
Warning: Ignoring 'secure' attribute in policy file from http://fpdownload.adobe.com/pub/swz/crossdomain.xml. The 'secure' attribute is only permitted in HTTPS and socket policy files. See http://www.adobe.com/go/strict_policy_files for details.
Resource bundle loaded for locale fr_fr ==> at this point, we appear to have our French assets loaded successfully
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 202,168 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 1,303,976 bytes after decompression
[Unload SWF] C:\ConnectedProducts\common-web\myname\bin-debug\myname.swf ==> some runs see this, but others do not. I expect it is a timing issue of whether it is reached or not before the crash
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 794,898 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 194,635 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 261,589 bytes after decompression
==> everything looks fine up to here. This is then when the third call to installCompiledResourceBundles occurs
Error: Could not find compiled resource bundle 'components' for locale 'en_US'.
    at mx.resources::ResourceManagerImpl/installCompiledResourceBundle()[E:\dev\4.0.0\frameworks \projects\framework\src\mx\resources\ResourceManagerImpl.as:340]
    at mx.resources::ResourceManagerImpl/installCompiledResourceBundles()[E:\dev\4.0.0\framework s\projects\framework\src\mx\resources\ResourceManagerImpl.as:269]
    at mx.core::FlexModuleFactory/installCompiledResourceBundles()
    at mx.core::FlexModuleFactory/docFrameHandler()
    at mx.core::FlexModuleFactory/docFrameListener()

Using Project Settings creates an app.config and dozens of errors about "Could not find schema information for the element...

I am trying to work with Application settings. I would just like to put together a very simple example of using these, but I can't get the most basic example to work. Virtually every tag regarding the new Settings produces an Error "Could not find the schema information for the element "applicationSettings". or the element "Settings" etc. etc. I am not using IIS, this is not a Web Project, and I am not working with User Settings. Just simple read-only Application Settings. I've read every MSDN page regarding this subject, I don't see that I am missing a reference - HELP !!!
REPRODUCING THE PROBLEM:
Step 1. Create a new C# solution and Windows Forms project.
Step 2. Add a reference to System.configuration
Step 3. Right click the project, choose Properties, then Settings.
Step 4. Using the Settings Designer, create ONE setting called "MySetting" as a String with the value "MyValue".
RESULT: Observe the Errors like these, complaining about all of the Settings tags and elements.
Message 1 Could not find schema information for the element 'applicationSettings'.
Message 2 Could not find schema information for the element 'LoadOriginalLists.Properties.Settings'.
Message 3 Could not find schema information for the element 'setting'.
HERE IS MY APP.CONFIG, AS GENERATED BY THE SETTING DESIGNER TOOL:
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<configSections>
<sectionGroup name="applicationSettings" type="System.Configuration.ApplicationSettingsGroup, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" >
<section name="LoadOriginalLists.Properties.Settings" type="System.Configuration.ClientSettingsSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
</sectionGroup>
</configSections>
<applicationSettings>
<LoadOriginalLists.Properties.Settings>
<setting name="MySetting" serializeAs="String">
<value>MyValue</value>
</setting>
</LoadOriginalLists.Properties.Settings>
</applicationSettings>
</configuration>

Ummmm... okay so these are Messages that are in the Error List. Whether or not they are actually Errors is debatable. They are in the Error List, so they are errors.
The application runs, so my question is slightly changed to the following.
I would like to use Application Settings. However, having settings in my app.config pollutes my Error List with a bunch of meaningless messages like "Could not find the schema information for...". These messages then hide real errors.
Am I missing some setting or is there something I can do to make Visual Studio not show me these messages?

Could not find type error - unknown or missing type

Similar Messages

Maybe you are looking for