OseException (-12021) Could not find snapshot error during synchronization

I have successfully deployed mobile adf client to blackberry simulator.
When I started the application first time, it synchronized the data without any errors.
But, in subsequent synchronizations, it shows the following error
oseException (-12021) Could not find snapshot with id 133.
Any help would be highly appreciated.

Similar Messages

Could not find file ERROR while connecting to access (mdb) file

I am getting the following error while connecting to the database:
javax.servlet.ServletException: [Microsoft][ODBC Microsoft Access Driver] Could not find file 'C:\WINNT\system32\Database1.mdb'.
Following is my code:
<%
     Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
     String database="jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=";
     String filename="D://BeaTemp//Database1";
     database+= filename.trim() + ";DriverID=22;READONLY=true}";
     Connection con=DriverManager.getConnection(database, "", "");
     Statement st=con.createStatement();
     ResultSet rs=st.executeQuery("select * from Database1.Employee");
     ResultSetMetaData rsmd=rs.getMetaData();
     while(rs.next()){
          for(int i=1;i<=rsmd.getColumnCount();i++) {
               out.println(rs.getString(i));
%>
What could be the problem..??
Thankx in advance..
Satish.

Got the solution.
The statement:
ResultSet rs=st.executeQuery("select * from Database1.Employee");
should be changed as:
ResultSet rs=st.executeQuery("select * from Employee");
Now, it is working fine.
Regards,
Satish.

"Could not find RAID" error in Disk Utility

Hello,
I could really use some help as this problem is causing me lots of headaches. I have two 500GB MyBook hard-drives connected to my MacBook Pro via two USB's. I had them setup as a mirrored RAID, and they were working properly for quite sometime. However over the past few weeks I noticed they were always in a degraded state, and Disk Utility would always rebuild them. However after the rebuild they would still have the status of "Degraded" and the next time Disk Utility opened it would start the rebuilding process yet again.
So I moved all the data on the drives to a backup, and I stopped the mirrored RAID. After erasing the data on the drives individually I attempted to setup the mirror again. However after the mirror had just about finished, and it was to the point of "bringing the RAID online" I always get an error that states "Creating RAID set failed", "Creating RAID set failed with the error: Could not find RAID.".
I'm hoping someone smarter than myself in this area can lend me some time and assistance to solving this issue.
Thanks,
Paul

Well. No one really came to my rescue with this question. Turned out to be a Finder issue. After reinstalling the operating system everything started working again with Disk Utility.
Later,
Paul

Could not find type error - unknown or missing type

Hello,
I have a sequence file created on the TestStand 3.5 version (running on winXP which I don't have at the moment) and I'm trying to use this sequence on my TestStand 4.2 (running on Win7).
The error is (see attached picture) Could not find type 'XML_POPUP' ,unknown or missing type.
I have tried adding a type named XML_POPUP to the MyTypes.ini->Step Types.
Is there a way to load the sequence without a type, I only need to see the steps and extract data for the new sequence I'm building.
I can also view the code of the sequence in NOTEPAD++ , is there a way to extract the data using the this code?
Thank you,
Lev
Attachments:
Capture.JPG ‏34 KB

Hi,
I have found an .ini file containing the XML_POPUP step type (as seen in the attached picture).
When I'm trying to load the sequence I receive the same error, that the 'XML_POPUP' type is not found.
After loading the .ini file as seen in the picture, do I need to configure something else for the sequence I'm trying to load to locate this type?
Thank you,
Lev
Attachments:
Capture.JPG ‏133 KB

[SOLVED] Pacman "config file could not be read" error during Arch ins

I've been attempting to get Arch setup for a while now, and after having some trouble with partitions, my wireless connecting, and setting up repos and mirrors, which the Wiki helped me solve, I've hit a bigger bump. While updating the system using pacman as the Beginners Guide says to do, I get errors when I try to continue the update process as follows :
btw: I'm typing this on a laptop next to my computer
[root@McArch~]# pacman -Syu
error: config file /etc/pacman.d/core could not be read
error: config file /etc/pacman.d/extra could not be read
error: config file /etc/pacman.d/community could not be read
:: Synchronizing package databases . . .
error: failed to updated core (unexpected error)
error: failed to updated extra (unexpected error)
error: failed to updated community (unexpected error)
error: failed to synchronize any databases
Any tips as to whats going on? I've tried to created said files, and even insert mirrors into the file, like in the /etc/pacman.d/mirrorlist file but this doesn't seem to help
Last edited by Windfinder (2008-09-29 20:43:29)

Glad you got it working.
I'm not sure what happened in your install but I just finished using an old 2007.08 iso and pacman first starts out with /etc/pacman.d/core, etc/pacman.d/extra, /etc/pacman.d/community ... etc., but I never had your problem when I did the #pacman -Syu after initial install reboot. The pacman update removes the above mentioned repos and replaces them with a single /etc/pacman.d/mirrorlist. You must have messed up an initial config file somehow as I couldn't get the same errors you got. It looks like you had your /etc/pacman.conf file messed up somehow and when you pointed it to the mirrorlist it could finally work properly. I'll just include my /etc/pacman.conf file and /etc/pacman.d/mirrorlist so you can compare. NB* these are from my x86_64 so for 32 bit machines i686 would replace x86_64 in the files.
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl %u > %o
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options (all disabled by default)
#NoPassiveFtp
#UseSyslog
#ShowSize
#UseDelta
#TotalDownload
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# Testing is disabled by default. To enable, uncomment the following
# two lines. You can add preferred servers immediately after the header,
# and they will be used before the default mirrors.
#[testing]
#Include = /etc/pacman.d/mirrorlist
[core]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[extra]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[community]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
/etc/pacman.d/mirrorlist
# Arch Linux repository mirrorlist
# North America
# - United States
Server = http://mirror.neotuli.net/arch/$repo/os/x86_64
Server = http://holmes.umflint.edu/archlinux/$repo/os/x86_64
Server = http://archlinux.unixheads.org/$repo/os/x86_64
Server = ftp://ftp.archlinux.org/$repo/os/x86_64
Server = ftp://locke.suu.edu/linux/dist/archlinux/$repo/os/x86_64
Server = ftp://ftp.gtlib.gatech.edu/pub/linux/distributions/archlinux/$repo/os/x86_64
Server = ftp://mirror.cs.vt.edu/pub/ArchLinux/$repo/os/x86_64
Server = http://mirrors.easynews.com/linux/archlinux/$repo/os/x86_64
Server = ftp://ftp.ibiblio.org/pub/linux/distributions/archlinux/$repo/os/x86_64
Server = http://mirror.rit.edu/archlinux/$repo/os/x86_64
Server = http://mirror.umoss.org/archlinux/$repo/os/x86_64
# - Canada
Server = ftp://mirror.csclub.uwaterloo.ca/archlinux/$repo/os/@carch
Well it was an interesting way to kill 30+ minutes.

Edge Animate could not find .html error message

I have a series of animate files that I have created. When I try to open the files to make edits, this error message appears:
All of the files are in the same folder, and I have not changed any file names or coding outside of animate. I can open the .html file and edit that, but when I go to save or publish, I get this message:
I've seen the first message on a couple of discussion threads, but it didn't really seem to resolve the initial problem. I'd love it if someone had a fix for this.

Hey guys,
Sorry for the trouble you're running into -- maybe check these few things.
Are you trying to open a published file? Only the original .html file can be opened with Animate; the published files aren't runtrippable.
Has the .an or associated .html file been renamed? Have any of the dependant folders or files been renamed? The naming used when saving needs to remain in tact. In the future we're looking to loosen this restriction, but if you rename the .html or .an Animate will barf when you try and open.
Is the file saved in a locked folder? Permission issues can arise if you have restrictions placed within the OS. If you're not sure where to look for this, Here's an article on how to change permissions on Windows. Be sure to check the directory you're saving to and publishing to. A quick test might be to copy the entire AN project/files onto a conventionally unlocked folder like the desktop and try running from there.
For the users in this thread: Can you describe your operating system, and where your files are being saved and where Animate is installed? For example C:\Windows\Blah\Programs
Thanks,
Sarah

"Could Not Find Key" error when trying to download iTunes 7

Everytime I try to install iTunes 7, it gets about half way done and then says that it cannot find some sort of key (HKEYLOCALMACHINE\Software\Classes\QuickTime.QuickTime\CLSID is the full text FYI). I have no clue what this means since I'm a far cry from a computer whiz. Any help would be awesome.

Here you go, this should do it.
http://support.microsoft.com/kb/2258121

Visio Shapes "Could not find match" Error

I upgraded to office 2010 just this past week, and after the upgrade I noticed I could no longer search for shapes in Visio 2007. I tried a repair. I re-indexed everything in the Indexing Options in the control panel. I uninstalled reinstalled. and
then I upgraded to Visio 2010 and aboslutely nothing has worked to fix this issue. please advise

If the shape search is no longer supported, why is there a search edit control under shapes?
Shape search is still supported. Internet shape search is no longer available.
Mind you, when shapes are found the shape search display is really badly broken. The display used to show which stencil the shapes had been found in (which was very, very useful because it gave you a clue to where other similar shapes might be found), but
now it's just a list of shapes with duplicates (and you have no idea which is metric and which is US units. Yes, I know the information is available if you do <shape>right-click -> properties, but that isn't the point.
Paul Herber, Sandrila Ltd. Engineering and software shapes for Visio
Sandrila Ltd

Need help in finding the root cause the error 'Could not find function:'

Hi fokls,
In my workflow notification , when I click on the notification to process it , it says ' 'Could not find function:' error.
I found the this message is coming out from the Fnd_new_messages table from the message_name 'FND_FUNCTION_NOT_FOUND'.
Here are my questions ...
1. FND_FUNCTION_NOT_FOUND - Is it a oracle Seeded message ?
2. If so the error I am getting is a oracle product Bug ?
And In between , I am getting this error for few transaction only. ( out of 100 , i am getting this error at the rate of 5 per 100 ... or less)
3 .If its a oracle product bug then , how is 95 out of 100 transaction are succssfully wokring ?
4. If is a custom bug , how it os not though for some other 95 transaction ?
5. Can I expect it as Data issue ? If so what kind of data issue.
Folks , any kind of info will be really , realy helpful for me ... please let me know your inputs for me.
Thansk to all in advance
Raghu

In the error message 'Could not find function:' after colon what function name it is giving.
'FND_FUNCTION_NOT_FOUND' is a seeded message only.
As you are saying the error was throwing only for 5% or less notifications, is the error throwing for same kind of notifications? I mean the item type and message are same for these erroneous notifications?
It can be that some function in particular type of workflow is error-ed out does not exists, when responding to those kind of notifications it might be throwing error.
Please check that.
Edited by: sarojak on Nov 12, 2010 6:16 AM

Could not find registry for CommunicationsApp_JBOServiceRegistry

Hi,
I have an SDO running at
http://localhost:7101/CoreModelApp-CommunicationsSDO-context-root/CommsAppModuleService
The application name in JDeveloper is CommunicationsApp though, so I believe that is the name i should be using?
The web-application.xml for my SDO contains the oracle.jbo.client.svc.ADFApplicationLifecycleListener already, and the composite which references the SDO contains :
<reference name="CommunicationsSDO" ui:wsdlLocation="http://localhost:7101/CoreModelApp-CommunicationsSDO-context-root/CommsAppModuleService?wsdl">
<interface.wsdl interface="/ybs/poc/app/sdo/communications/common/#wsdl.interface(CommsAppModuleService)"/>
<binding.adf serviceName="{/ybs/poc/app/sdo/communications/common/}CommsAppModuleService" registryName="CommunicationsApp_JBOServiceRegistry"/>
I continuously get the 'Could not find registry' error whenever I call the service from enterprise manager.
How do I make sure I have the correct registry name? Or is my problem something to do with my SDO running on JDevelopers Integrated WebLogic Server whilst my service references it from an independent WebLogic installation?
Any help on this would be much appreciated.
Thanks,
Alex

Hi,
most probably that means you are trying to use command (in some command group or so) which does not exist or is wrongly registered with different alias. It should be logged in the error message what is the alias it can not find.
Best,
--epexpert

Error during start up of Premiere Pro CS6. "... could not find any capable video play modules..."

During start up of Adobe Premiere Pro CS6, I get the following error message. "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again." This does not occur on After Effects, and the program runs successfully. Premiere Pro will not open, and in the start up window the last thing the status line states before the error message occurs is: "Loading ImporterQuikTime.prm"
I have added an NVidia GPU card to my system and have installed the latest video drivers from the NVidida website (GeForce 310.70). This did not help. I have QuikTime on my computer, but am not sure if it needs to be in a certain file location.
I have also gone in to BIOS after installing the GPU and disabled internal graphics, but that did not help either. Not sure what to do next. Any suggestions?
Thank you,
Rhoadman

Thank you everyone for the replies. Although I don't have a laptop, the following seems to work.
Solution 1
On Windows 7, right-click the shortcut to Adobe Premiere Pro, and choose Run as Administrator.
Using this method, Premiere Pro opened successfully. Using the shortcut directly, the error persists. It looks like we will just have to open the program using this method.
Many thanks for the replies.

Windows SharePoint Services Error: Exception Details: System.IO.FileNotFoundException: Could not find the application on the Web

I am developing a WSS based WCM site for a customer which has a bilingual interface. Now everything is wokring fine in the development environment. Today I backed-up the Content Database and took the related control file (.ascx & .ascx.cs) to deploy it to the cusomter's test machine. I dint face any problems with the deployment, and after deleted and added the Content DB from Central Administration, I was able to access the English part of the website along with my changes without any problem.
But when I tried accessing the Arbic part of the website, Its giving me the following error,
تعذر العثور على تطبيق ويب الموجود على http://172.20.5.163/ar/. تأكد من كتابتك لمحدد موقع المعلومات (URL) بشكل صحيح. إذا كان URL يؤدي إلى محتوى موجود، يجب على مسؤول النظام إضافة تعيين URL للتطبيق المراد خاص بالطلب الجديد.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileNotFoundException: تعذر العثور على تطبيق ويب الموجود على http://172.20.5.163/ar/. تأكد من كتابتك لمحدد موقع المعلومات (URL) بشكل صحيح. إذا كان URL يؤدي إلى محتوى موجود، يجب على مسؤول النظام إضافة تعيين URL للتطبيق المراد خاص بالطلب الجديد.
Roughly translated, it means "Could not find the application on the Web http://172.20.5.163/ar/. Make sure you create your site specific information (URL) correctly. If the URL to the content of lead present, the system administrator to add URL for the application of the appointment of a special request to be new.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileNotFoundException: Could not find the application on the Web http://172.20.5.163/ar/. Make sure you create your site specific information (URL) correctly. If the URL to the content of lead present, the system administrator to add URL for the application of the appointment of a special request to be new."
Can you please tell me what is the cause of the problem and how to rectify it? Also do I need to
Regards,
SoniSSP

It is searching for the page, but that page is not available. Did u install the current language pack?

HT3275 For the past several days, I have been getting this message during backups: Time Machine could not complete the back up. The backup disk image "Volumes/Data/iMac.sparsebundle" could not be accessed (error-1).

For the past several days, I have been getting this message during backups:
Time Machine could not complete the back up. The backup disk image "Volumes/Data/bhoppy2's iMac.sparsebundle" could not be accessed (error-1). When I click on the 'help' icon on the message, it reverts to a blank page, and I cannot find anything online regarding the term 'sparsebundle.' In addition, I cannot access previous backups any longer.
Help?

See C17 in Time Machine Troubleshooting by Time Machine guru Pondini:
http://pondini.org/TM/Troubleshooting.html

Error "Could not find -Xrun library: libjdwp.so" when starting WL 6.1 in debug mode

Hello,
I installed WL 6.1 SP4 on Solaris (trial version). The installation went well
and we were able to start the server and run our application. I then added the
debug options in the start script :
$JAVACMD $JAVA_OPTIONS -Xdebug -Xnoagent -Djava.compiler=NONE -Xrunjdwp:transport=dt_socket,server=y,address=7212,suspend=n
When I then try to start the server I get the following error :
Error occurred during initialization of VM
Could not find -Xrun library: libjdwp.so
I looked and the library is installed in our sdk :
/products/java/j2sdk1_3_1_07/lib/sparc/libsjwp.so
What did we do wrong?
Thanks for your help,
Roland

Hi Wayne,
I took the instructions from our WL 5.1 installation. I hope the options are still
the same (if not can you tell me where to find the correct ones?).
You were right about the LD_LIBRARY_PATH. I added the line :
LD_LIBRARY_PATH=$JAVA_HOME/lib/sparc:$LD_LIBRARY_PATH
and now I can start the application without any errors.
Thanks!
Roland
"Wayne W. Scott" <[email protected]> wrote:
>
Where did you get the instructions for adding the debug options?
Since libsjwp.so is a shared object, what does your LD_LIBRARY_PATH look
like?
Is /products/java/j2sdk1_3_1_07/lib/sparc in it?
Wayne Scott
Roland Pennings wrote:
Hello,
I installed WL 6.1 SP4 on Solaris (trial version). The installationwent well
and we were able to start the server and run our application. I thenadded the
debug options in the start script :
$JAVACMD $JAVA_OPTIONS -Xdebug -Xnoagent -Djava.compiler=NONE -Xrunjdwp:transport=dt_socket,server=y,address=7212,suspend=n
When I then try to start the server I get the following error :
Error occurred during initialization of VM
Could not find -Xrun library: libjdwp.so
I looked and the library is installed in our sdk :
/products/java/j2sdk1_3_1_07/lib/sparc/libsjwp.so
What did we do wrong?
Thanks for your help,
Roland

BW Monitor error Could not find code page for receiving system

Hi All,
Frequent BW Monitor error - Could not find code page for receiving system
I checked SM59 and every setting is fine there. Any other possibility ?
Regards
Srinivas

The log updated in the status tab was:
Error when updating Idocs in Business Information Warehouse
Diagnosis
Errors have been reported in Business Information Warehouse during IDoc update:
Could not find code page for receiving system
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Business Information Warehouse . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.

OseException (-12021) Could not find snapshot error during synchronization

Similar Messages

Maybe you are looking for