Could not find file ERROR while connecting to access (mdb) file

I am getting the following error while connecting to the database:
javax.servlet.ServletException: [Microsoft][ODBC Microsoft Access Driver] Could not find file 'C:\WINNT\system32\Database1.mdb'.
Following is my code:
<%
     Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
     String database="jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=";
     String filename="D://BeaTemp//Database1";
     database+= filename.trim() + ";DriverID=22;READONLY=true}";
     Connection con=DriverManager.getConnection(database, "", "");
     Statement st=con.createStatement();
     ResultSet rs=st.executeQuery("select * from Database1.Employee");
     ResultSetMetaData rsmd=rs.getMetaData();
     while(rs.next()){
          for(int i=1;i<=rsmd.getColumnCount();i++) {
               out.println(rs.getString(i));
%>
What could be the problem..??
Thankx in advance..
Satish.

Got the solution.
The statement:
ResultSet rs=st.executeQuery("select * from Database1.Employee");
should be changed as:
ResultSet rs=st.executeQuery("select * from Employee");
Now, it is working fine.
Regards,
Satish.

Similar Messages

  • Could not find a part of the path 'C:\Program Files\Update Services\Schema\

    clean SC 2012 R2 RTM.
    1. had problems with WSUS installation/post configuration
    2. found a blog with an identical problem where the problem was solved with the call to Microsoft. Tools directory was missing.
    I followed the suggestion: reinstalled WSUS using ps and wsusutil.
    I canceled WSUS configuration at recommended step. Everything looked fine.
    But after SUP creation I found SMS_WSUS_CONFIGURATION_MANAGER warning.
    I checked WCM.log and found Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.
    When checked there was no Schema folder in the path above. So it's just missing as folder TOOLS before troubleshooting.
    Any suggestions for fixing this.
    Thanks.
    Here is partial WCM that could help to find the issue, I clearly see that there is no Schema directory in C:\Program Files\Update Services:
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    Verify Upstream Server settings on the Active WSUS Server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    No changes - WSUS Server settings are correctly configured and Upstream Server is set to Microsoft Update SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    Refreshing categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    Successfully refreshed categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:14 PM 4536 (0x11B8)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:20 PM 4536 (0x11B8)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:20 PM 4536 (0x11B8)
    Successfully inserted WSUS Enterprise Update Source object {91F81925-CC1D-40C0-98C3-902AD3717594} SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:21 PM 4536 (0x11B8)
    Configuration successful. Will wait for 1 minute for any subscription or proxy changes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:21 PM 4536 (0x11B8)
    Setting new configuration state to 2 (WSUS_CONFIG_SUCCESS) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:21 PM 4536 (0x11B8)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:21 PM 4536 (0x11B8)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:21 PM 4536 (0x11B8)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    PublishApplication(8427071A-DA80-48C3-97DE-C9C528F73A2D) failed with error System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.~~   at System.IO.__Error.WinIOError(Int32
    errorCode, String maybeFullPath)~~   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath,
    Boolean bFromProxy, Boolean useLongPath, Boolean checkHost)~~   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)~~  
    at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize)~~   at System.Xml.XmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn)~~   at System.Xml.XmlTextReaderImpl.FinishInitUriString()~~  
    at System.Xml.XmlReaderSettings.CreateReader(String inputUri, XmlParserContext inputContext)~~   at System.Xml.Schema.XmlSchemaSet.Add(String targetNamespace, String schemaUri)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage.Verify(String
    packageFile)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage..ctor(String packageFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.Publisher.LoadPackageMetadata(String sdpFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetPublisher(String
    sdpFile)~~   at Microsoft.SystemsManagementServer.WSUS.WSUSServer.PublishApplication(String sPackageId, String sSDPFile, String sCabFile) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    ERROR: Failed to publish sms client to WSUS, error = 0x80070003 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    STATMSG: ID=6613 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=confman.contoso.lan SITE=MON PID=1716 TID=4536 GMTDATE=Sat Dec 07 22:10:22.831 2013 ISTR0="8427071A-DA80-48C3-97DE-C9C528F73A2D" ISTR1="5.00.7958.1000"
    ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    Failed to publish client with error = 0x80070003 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    completed checking for client deployment SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    HandleSMSClientPublication failed. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    Waiting for changes for 58 minutes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    Shutting down... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:51:31 PM 4536 (0x11B8)
    Shutting Down... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:51:31 PM 4536 (0x11B8)
    SMS_EXECUTIVE started SMS_WSUS_CONFIGURATION_MANAGER as thread ID 4168 (0x1048). SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:38 PM 2008 (0x07D8)
    This confman.contoso.lan system is the SMS Site Server. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
    Populating config from SCF SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
    Setting new configuration state to 1 (WSUS_CONFIG_PENDING) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
    Changes in active SUP list detected. New active SUP List is: SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
        SUP0: confman.contoso.lan, group = CONFMAN, nlb = SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
    Updating active SUP groups... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
    Waiting for changes for 1 minutes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
    Wait timed out after 0 minutes while waiting for at least one trigger event. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:43 PM 4168 (0x1048)
    Timed Out... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Checking runtime v2.0.50727... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Did not find supported version of assembly Microsoft.UpdateServices.Administration. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Checking runtime v4.0.30319... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Found supported assembly Microsoft.UpdateServices.Administration version 4.0.0.0, file version 6.3.9600.16384 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Found supported assembly Microsoft.UpdateServices.BaseApi version 4.0.0.0, file version 6.3.9600.16384 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Supported WSUS version found SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:55 PM 4168 (0x1048)
    Verify Upstream Server settings on the Active WSUS Server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:55 PM 4168 (0x1048)
    No changes - WSUS Server settings are correctly configured and Upstream Server is set to Microsoft Update SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
    Setting new configuration state to 4 (WSUS_CONFIG_SUBSCRIPTION_PENDING) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
    Refreshing categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
    Successfully refreshed categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:54:27 PM 4168 (0x1048)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:54:32 PM 4168 (0x1048)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:54:32 PM 4168 (0x1048)
    Configuration successful. Will wait for 1 minute for any subscription or proxy changes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:54:32 PM 4168 (0x1048)
    Setting new configuration state to 2 (WSUS_CONFIG_SUCCESS) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:32 PM 4168 (0x1048)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:32 PM 4168 (0x1048)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:32 PM 4168 (0x1048)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:34 PM 4168 (0x1048)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:34 PM 4168 (0x1048)
    PublishApplication(8427071A-DA80-48C3-97DE-C9C528F73A2D) failed with error System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.~~   at System.IO.__Error.WinIOError(Int32
    errorCode, String maybeFullPath)~~   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath,
    Boolean bFromProxy, Boolean useLongPath, Boolean checkHost)~~   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)~~  
    at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize)~~   at System.Xml.XmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn)~~   at System.Xml.XmlTextReaderImpl.FinishInitUriString()~~  
    at System.Xml.XmlReaderSettings.CreateReader(String inputUri, XmlParserContext inputContext)~~   at System.Xml.Schema.XmlSchemaSet.Add(String targetNamespace, String schemaUri)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage.Verify(String
    packageFile)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage..ctor(String packageFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.Publisher.LoadPackageMetadata(String sdpFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetPublisher(String
    sdpFile)~~   at Microsoft.SystemsManagementServer.WSUS.WSUSServer.PublishApplication(String sPackageId, String sSDPFile, String sCabFile) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    ERROR: Failed to publish sms client to WSUS, error = 0x80070003 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    STATMSG: ID=6613 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=confman.contoso.lan SITE=MON PID=1668 TID=4168 GMTDATE=Sat Dec 07 22:55:35.051 2013 ISTR0="8427071A-DA80-48C3-97DE-C9C528F73A2D" ISTR1="5.00.7958.1000"
    ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    Failed to publish client with error = 0x80070003 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    completed checking for client deployment SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    HandleSMSClientPublication failed. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    Waiting for changes for 58 minutes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    Trigger event array index 0 ended. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    SCF change notification triggered. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:40 PM 4168 (0x1048)
    Populating config from SCF SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:40 PM 4168 (0x1048)
    Waiting for changes for 58 minutes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:40 PM 4168 (0x1048)
    "When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

    >Any Errors in SUPSetup.log and WSUSCtrl.log log files?
    No errors in these files. As I mentioned there is no Schema folder in  Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.~~ 
    Here are 3 repetitive errors in WCM.log:
    1. PublishApplication(8427071A-DA80-48C3-97DE-C9C528F73A2D) failed with error System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.~~   at System.IO.__Error.WinIOError(Int32
    errorCode, String maybeFullPath)~~   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath,
    Boolean bFromProxy, Boolean useLongPath, Boolean checkHost)~~   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)~~  
    at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize)~~   at System.Xml.XmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn)~~   at System.Xml.XmlTextReaderImpl.FinishInitUriString()~~  
    at System.Xml.XmlReaderSettings.CreateReader(String inputUri, XmlParserContext inputContext)~~   at System.Xml.Schema.XmlSchemaSet.Add(String targetNamespace, String schemaUri)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage.Verify(String
    packageFile)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage..ctor(String packageFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.Publisher.LoadPackageMetadata(String sdpFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetPublisher(String
    sdpFile)~~   at Microsoft.SystemsManagementServer.WSUS.WSUSServer.PublishApplication(String sPackageId, String sSDPFile, String sCabFile)
    2. Failed to publish client with error = 0x80070003
    3. HandleSMSClientPublication failed.
    "When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

  • Configuration could not be verified error when connect to Cox

    Hi,
    I'm trying to connect to Cox but keep getting the "configuration could not be verified" error. I can access my Cox account through web mail and I've retyped and retried my email address and password enough times to be confident that it's correct. I've also verified my account settings (incoming/outgoing server and ports) with Cox support, and I've checked the my firewall and antivirus settings (norton 360). No luck with anything.
    I'd really appreciate any thoughts anyone has!
    Thanks,
    David

    I should have added that my Cox connection has been set up several years now with no problems but suddenly quit working. I checked everything I know to check, including firewall settings, and finally deleted email account and tried to set it up again. Still getting the same error.

  • Cs4 ai after yosemite upgrade could not find a plug-in to read linked psd file

    cs4 ai after yosemite upgrade could not find a plug-in to read linked psd file
    need to revise a client's file and can not access links!
    any hope?!

    Not that I know. It's a compatibility issue and so far I haven't seen a fix.
    Mylenium

  • "Could not create SSOToken" error while setting agent for SSO

    Hello,
    I configured my agent as follows:
    Version: 3.0
    Build Date: 20071212
    Application Server Config Directory : C:\Sun\SDK\domains\domain1\config
    Application Server Instance name : server
    Access Manager URL : http://juno:6140/opensso
    Domain Administration Server Host is remote : false
    Agent URL : http://juno:8080
    Deployment URI for the Agent Application : /agentapp
    Encryption Key : J+KQLOM+s6gAQb1Y1H8uJoej3bzKBAEN
    Agent Profile name : asagent
    Agent Profile Password file name : c:\temp\password.TXT
    Agent installed on the DAS host for a remote instance : false
    The AM and the sample applications are both running on separate domains.
    Following steps I performed:
    1. I started my SSO domain (domain2) first and then the application domain where my agent is installed (domain1).
    2. I deployed the agentsample.ear file after compilation through build.xml file
    When I try to access the URL (http://localhost:8080/agentsample/index.html), it throw the following exception (recorded in amSSO log file located in the Agent_001
    12/14/2007 11:16:16:242 AM EST: Thread[httpSSLWorkerThread-8080-0,10,Grizzly]
    12/14/2007 11:16:16:242 AM EST: Thread[httpSSLWorkerThread-8080-0,10,Grizzly]
    could not create SSOTOken for token ID AQIC5wM2LY4SfcykqWPzOYlM/mkFg8E9ozYLBizVono/kDE=@AAJTSQACMDE=#
    com.iplanet.dpro.session.SessionException: Service URL not found:session
         at com.iplanet.dpro.session.Session.refresh(Session.java:1133)
         at com.iplanet.dpro.session.Session.getSession(Session.java:808)
         at com.iplanet.sso.providers.dpro.SSOProviderImpl.createSSOToken(SSOProviderImpl.java:154)
         at com.iplanet.sso.SSOTokenManager.createSSOToken(SSOTokenManager.java:300)
         at com.sun.identity.authentication.AuthContext.getSSOToken(AuthContext.java:1105)
         at com.sun.identity.security.SystemAppTokenProvider.getAppSSOToken(SystemAppTokenProvider.java:87)
         at com.sun.identity.security.AdminTokenAction.run(AdminTokenAction.java:222)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sun.identity.common.PropertiesFinder.getProperty(PropertiesFinder.java:49)
         at com.iplanet.am.util.SystemProperties.get(SystemProperties.java:255)
         at com.iplanet.am.util.SystemProperties.get(SystemProperties.java:298)
         at com.iplanet.dpro.session.SessionID.<clinit>(SessionID.java:90)
         at com.iplanet.sso.providers.dpro.SSOProviderImpl.createSSOToken(SSOProviderImpl.java:153)
         at com.iplanet.sso.SSOTokenManager.createSSOToken(SSOTokenManager.java:300)
         at com.sun.identity.authentication.AuthContext.getSSOToken(AuthContext.java:1105)
         at com.sun.identity.security.SystemAppTokenProvider.getAppSSOToken(SystemAppTokenProvider.java:87)
         at com.sun.identity.security.AdminTokenAction.run(AdminTokenAction.java:222)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sun.identity.common.configuration.ConfigurationBase.isLegacy(ConfigurationBase.java:180)
         at com.sun.identity.common.configuration.ConfigurationObserver.createAttributeMapping(ConfigurationObserver.java:62)
         at com.sun.identity.common.configuration.ConfigurationObserver.<init>(ConfigurationObserver.java:58)
         at com.sun.identity.common.configuration.ConfigurationObserver.<clinit>(ConfigurationObserver.java:50)
         at com.sun.identity.common.DebugPropertiesObserver.<clinit>(DebugPropertiesObserver.java:44)
         at com.sun.identity.agents.arch.AgentConfiguration.bootStrapClientConfiguration(AgentConfiguration.java:587)
         at com.sun.identity.agents.arch.AgentConfiguration.initializeConfiguration(AgentConfiguration.java:1008)
         at com.sun.identity.agents.arch.AgentConfiguration.<clinit>(AgentConfiguration.java:1321)
         at com.sun.identity.agents.arch.Manager.<clinit>(Manager.java:622)
         at com.sun.identity.agents.filter.AmAgentBaseFilter.initializeFilter(AmAgentBaseFilter.java:217)
         at com.sun.identity.agents.filter.AmAgentBaseFilter.getAmFilterInstance(AmAgentBaseFilter.java:279)
         at com.sun.identity.agents.filter.AmAgentBaseFilter.doFilter(AmAgentBaseFilter.java:64)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:230)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:198)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:288)
         at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:271)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:202)
         at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
         at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
         at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:94)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:206)
         at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
         at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1080)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:150)
         at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
         at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1080)
         at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:270)
         at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.invokeAdapter(DefaultProcessorTask.java:637)
         at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.doProcess(DefaultProcessorTask.java:568)
         at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.process(DefaultProcessorTask.java:813)
         at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.executeProcessorTask(DefaultReadTask.java:339)
         at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:261)
         at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:212)
         at com.sun.enterprise.web.portunif.PortUnificationPipeline$PUTask.doTask(PortUnificationPipeline.java:361)
         at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:265)
         at com.sun.enterprise.web.connector.grizzly.ssl.SSLWorkerThread.run(SSLWorkerThread.java:106)
    12/14/2007 11:32:28:916 AM EST: Thread[httpSSLWorkerThread-8080-0,10,Grizzly]
    12/14/2007 11:32:28:916 AM EST: Thread[httpSSLWorkerThread-8080-0,10,Grizzly]
    could not create SSOTOken for token ID AQIC5wM2LY4SfcyqQ1KVtRFCVm5y4qGBf7JcHCnC6du58xk=@AAJTSQACMDE=#
    com.iplanet.dpro.session.SessionException: Service URL not found:session
         at com.iplanet.dpro.session.Session.refresh(Session.java:1133)
         at com.iplanet.dpro.session.Session.getSession(Session.java:808)
         at com.iplanet.sso.providers.dpro.SSOProviderImpl.createSSOToken(SSOProviderImpl.java:154)
         at com.iplanet.sso.SSOTokenManager.createSSOToken(SSOTokenManager.java:300)
         at com.sun.identity.authentication.AuthContext.getSSOToken(AuthContext.java:1105)
         at com.sun.identity.security.SystemAppTokenProvider.getAppSSOToken(SystemAppTokenProvider.java:87)
         at com.sun.identity.security.AdminTokenAction.run(AdminTokenAction.java:222)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sun.identity.common.PropertiesFinder.getProperty(PropertiesFinder.java:49)
         at com.iplanet.am.util.SystemProperties.get(SystemProperties.java:255)
         at com.iplanet.am.util.SystemProperties.get(SystemProperties.java:298)
         at com.iplanet.dpro.session.SessionID.<clinit>(SessionID.java:90)
         at com.iplanet.sso.providers.dpro.SSOProviderImpl.createSSOToken(SSOProviderImpl.java:153)
         at com.iplanet.sso.SSOTokenManager.createSSOToken(SSOTokenManager.java:300)
         at com.sun.identity.authentication.AuthContext.getSSOToken(AuthContext.java:1105)
         at com.sun.identity.security.SystemAppTokenProvider.getAppSSOToken(SystemAppTokenProvider.java:87)
         at com.sun.identity.security.AdminTokenAction.run(AdminTokenAction.java:222)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sun.identity.common.configuration.ConfigurationBase.isLegacy(ConfigurationBase.java:180)
         at com.sun.identity.common.configuration.ConfigurationObserver.createAttributeMapping(ConfigurationObserver.java:62)
         at com.sun.identity.common.configuration.ConfigurationObserver.<init>(ConfigurationObserver.java:58)
         at com.sun.identity.common.configuration.ConfigurationObserver.<clinit>(ConfigurationObserver.java:50)
         at com.sun.identity.common.DebugPropertiesObserver.<clinit>(DebugPropertiesObserver.java:44)
         at com.sun.identity.agents.arch.AgentConfiguration.bootStrapClientConfiguration(AgentConfiguration.java:587)
         at com.sun.identity.agents.arch.AgentConfiguration.initializeConfiguration(AgentConfiguration.java:1008)
         at com.sun.identity.agents.arch.AgentConfiguration.<clinit>(AgentConfiguration.java:1321)
         at com.sun.identity.agents.arch.Manager.<clinit>(Manager.java:622)
         at com.sun.identity.agents.filter.AmAgentBaseFilter.initializeFilter(AmAgentBaseFilter.java:217)
         at com.sun.identity.agents.filter.AmAgentBaseFilter.getAmFilterInstance(AmAgentBaseFilter.java:279)
         at com.sun.identity.agents.filter.AmAgentBaseFilter.doFilter(AmAgentBaseFilter.java:64)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:230)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:198)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:288)
         at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:271)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:202)
         at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
         at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
         at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:94)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:206)
         at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
         at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1080)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:150)
         at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
         at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1080)
         at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:270)
         at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.invokeAdapter(DefaultProcessorTask.java:637)
         at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.doProcess(DefaultProcessorTask.java:568)
         at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.process(DefaultProcessorTask.java:813)
         at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.executeProcessorTask(DefaultReadTask.java:339)
         at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:261)
         at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:212)
         at com.sun.enterprise.web.portunif.PortUnificationPipeline$PUTask.doTask(PortUnificationPipeline.java:361)
         at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:265)
         at com.sun.enterprise.web.connector.grizzly.ssl.SSLWorkerThread.run(SSLWorkerThread.java:106)
    I spent lot of time refering the supporting document but could not find any solution.
    Your assistance will be greatly appreciated.
    Thanks,
    Vinit

    Seems that the « Reuse connection » command is essential to assure that an application use ONLY ONE Jco.  I get rid of the disconnectIfAlive.
    Recommendation 1: Put all the BAPIs that you call in the same system into the same model!
    Recommendation 2: If you canu2018t follow recommendation 1, make sure that the two models synchronize their (JCo) connections!
    // two separate model instances are created ...
    MyFirstModelTypemodelMyFirst= (MyFirstModelType) WDModelFactory.getModelInstance(
    MyFirstModelType.class,
    WDModelScopeType.APPLICATION_SCOPE);
    MyOtherModelTypemodelMyOther= (MyOtherModelType) WDModelFactory.getModelInstance(
    MyOtherModelType.class,
    WDModelScopeType.APPLICATION_SCOPE);
    // ... but the first model manages and provides the
    // connection for the other model
    modelMyOther.setConnectionProvider(modelMyFirst);
    Edited by: Emanuel Champagne on Jun 27, 2008 2:38 PM

  • "Could not find RAID" error in Disk Utility

    Hello,
    I could really use some help as this problem is causing me lots of headaches. I have two 500GB MyBook hard-drives connected to my MacBook Pro via two USB's. I had them setup as a mirrored RAID, and they were working properly for quite sometime. However over the past few weeks I noticed they were always in a degraded state, and Disk Utility would always rebuild them. However after the rebuild they would still have the status of "Degraded" and the next time Disk Utility opened it would start the rebuilding process yet again.
    So I moved all the data on the drives to a backup, and I stopped the mirrored RAID. After erasing the data on the drives individually I attempted to setup the mirror again. However after the mirror had just about finished, and it was to the point of "bringing the RAID online" I always get an error that states "Creating RAID set failed", "Creating RAID set failed with the error: Could not find RAID.".
    I'm hoping someone smarter than myself in this area can lend me some time and assistance to solving this issue.
    Thanks,
    Paul

    Well. No one really came to my rescue with this question. Turned out to be a Finder issue. After reinstalling the operating system everything started working again with Disk Utility.
    Later,
    Paul

  • Could not find Main Class while executing JAR

    Hello all,
    I am having a simple Jar file that contains one java class that merely displays a window. I am using NetBeans IDE to create the JAR file. When i execute this JAR file by double clicking on the file, it works fine on the machine. However, if i try to execute this same file on any other windows computer, it gives an error "Could not find the main class. Program will exit."
    In other words, the JAR file is only working on the computer that has NetBeans and JDK installed on. Not on any other machine. Although the other machines have the JAVA Virtual Machine installed.
    I would appreciated any help on this topic.

    I had the same problem (i.e. Message-Box with "Could not find the main class. Program will exit.")
    After insuring that the manifest contained a Main-Class: argument and that the argument pointed to the right class, I started the jar via java -jar myjar.jar and read the stacktrace, which is much better than the popup-window.
    In my case the error was, that the Main-Class could not be loaded due to another referenced class, which was not on the classpath. (i.e. it was not in the same jar-File and the manifest didn't include a Class-Path: argument.)
    After adding the correct Class-Path: argument in the manifest, the problem went away.
    I now have the following setup:
    myjar.jar and somethirdparty.jar in the same directory.
    myjar.jar contains a manifest which includes the lines
    Class-Path: somethirdparty.jar
    Main-Class: my.package.and.MainClassafter the normal Manifest-header.

  • Could not find type error - unknown or missing type

    Hello,
    I have a sequence file created on the TestStand 3.5 version (running on winXP which I don't have at the moment) and I'm trying to use this sequence on my TestStand 4.2 (running on Win7).
    The error is (see attached picture) Could not find type 'XML_POPUP' ,unknown or missing type.
    I have tried adding a type named XML_POPUP to the MyTypes.ini->Step Types.
    Is there a way to load the sequence without a type, I only need to see the steps and extract data for the new sequence I'm building.
    I can also view the code of the sequence in NOTEPAD++ , is there a way to extract the data using the this code?
    Thank you,
    Lev 
    Attachments:
    Capture.JPG ‏34 KB

    Hi,
    I have found an .ini file containing the XML_POPUP step type (as seen in the attached picture).
    When I'm trying to load the sequence I receive the same error, that the 'XML_POPUP' type is not found.
    After loading the .ini file as seen in the picture, do I need to configure something else for the sequence I'm trying to load to locate this type?
    Thank you,
    Lev
    Attachments:
    Capture.JPG ‏133 KB

  • VENDOR-EXTERNAL_ID could not be found error while loading supplier conatact

    Hi,
    Please somebody answer to my doubt.
    I am trying to load supplier contact to CLM. I am getting "VENDOR-EXTERNAL_ID could not be found" error for all the entries even though those vendors are present in the system.
    Kindly help this, This is bit urgent to work on..
    Thanks much for your help in advance.
    Regards,
    Gurvi.

    Hi Vikram,
    Thanks for the answer.
    I have done the same thing but not getting object type to select and getting below error without selecting object type and imported.
    records with errors or warnings from file fci_1589662556155572276_contacts.csv                                                                                                                                                                                                                                           
    VENDOR_EXTERNAL_ID     CONTACT_TYPE     PRIMARY_CONTACT     DOCUMENT_DESCRIPTION     NAME     DIRECTORY     COMMON_NAME     FULL_DN     FIRST_NAME     LAST_NAME     COMPANY_NAME     TITLE     ADDRESS_1     ADDRESS_2     CITY     STATE_PROVINCE     COUNTY     REGION     POSTAL_CODE     COUNTRY     PHONE_1     PHONE_2     FAX_1     FAX_2     EMAIL     MAILBOX_ALIAS     MAILBOX_SERVER     TIME_ZONE     CURRENCY     DATE_FORMAT     DISPLAY_LANGUAGE     DEFAULT_GROUP     EXTERNAL_REF     LOCATION     ROLES     INACTIVE     CAN_LOGIN     AUTO_BCC     RETURN_RECEIPT     HTML_MAIL     CREATE_DIR_ACCOUNT     GENERATE_NEW_PWD     SEND_NOTIFICATION     DIR_PRINCIPAL     DIR_CREDENTIALS     EXPORT_EXCEL     DEFAULT_ADDRESS     RECEIVE_DISCUSSION_EMAILS
    Failed: object 1: Database error: DB2 SQL error: SQLCODE: -302      SQLSTATE: 22001      SQLERRMC: null. Contact your system administrator. [STANDARD_ATTRIBUTE_ID]                                                                                                                                                                                                                                 
    30000520     Sales     TRUE     Field is not displayed     LOWER(CONCATENATE(LEFT(J52,7),LEFT(I52,1)))     directory.local.ss               Tom     Boreas     KELCO INC                    Billingsly     RI               48201     US     617-555-1212                    (GMT-5:00) Eastern Standard Time     USD          English                         FALSE     TRUE     FALSE     FALSE     FALSE     TRUE     TRUE     FALSE               TRUE     FALSE     
    Failed: object 2: Database error: DB2 SQL error: SQLCODE: -302      SQLSTATE: 22001      SQLERRMC: null. Contact your system administrator. [STANDARD_ATTRIBUTE_ID]                                                                                                                                                                                                                                 
    I do not what is happening with import feature in ESO. Kindly help me what to do now.
    Regards,
    Gurvi.

  • OseException (-12021) Could not find snapshot error during synchronization

    I have successfully deployed mobile adf client to blackberry simulator.
    When I started the application first time, it synchronized the data without any errors.
    But, in subsequent synchronizations, it shows the following error
    oseException (-12021) Could not find snapshot with id 133.
    Any help would be highly appreciated.

    I have successfully deployed mobile adf client to blackberry simulator.
    When I started the application first time, it synchronized the data without any errors.
    But, in subsequent synchronizations, it shows the following error
    oseException (-12021) Could not find snapshot with id 133.
    Any help would be highly appreciated.

  • Getting "Could not Import Universe" error while trying to refresh a Report

    Hi,
    When we are trying to refresh a report in ZABO in production environment, we are getting an error "Could not import universe".
    We are able to import all other universes and refresh all other reports thru ZABO.
    Even these reports that are dependent on this universe are getting refreshed in Infoview and Full client. We are continuously facing this issue in ZABO.
    We tried the following steps but it did not fix the problem.
    1) Go to Tools -> Universes; Select the Universe to be imported and click on "Import" - Result: An error stating "Cannot find Universe".
    Click on "Refresh" button and then on "Import" again.
    Still the same error " Cannot find Universe"
    2) Click on "Data manager" after opening the report. Go to 'Definition' tab -> click on "..." - Result: "Cannot find Universe" error.
    3) Go to C:\Documents and Settings\<user name>\Application Data\Business Objects\Business Objects 6.0\lsi\
    Take a backup of .rkey and .lsi files of our gateway server and delete them from that location.Then relogin Infoview and ZABO.
    4)Go to Internet Options -> Temporary File Settings -> View Objects.
    Delete RptViewerAX class and ZaboCheckandRunControl class and relogin infoview and ZABO.
    5) Tried creating a new Document based on that Universe.
    6)Publish the universe with a different name and try creating a report based on that.
    None of these trials worked out. Please help us to fix this issue.
    Note: Our Production environment is reverse proxy enabled that has a time out set to 15 mins at webintelligence level. The Error is being observed with in 2 mins from the refresh process started.
    Regards
    Chaitanya

    Hi,
    Go to CMC, and check the path in file store where this Universe is stored.
    Follow this path and check if this universe is present there.
    If you have a local copy, you could open and export this by changing the name and try re-pointint one of the reports.
    If it works, you could delete the original and rename it to the original Universe.
    Regards,
    Jayendra.

  • Could not update database error while installation

    Hi i am in the middle of 4.7 installation (IDES). At the step 29 database update statistics, system stops giving error
    ERROR 2008-04-30 09:10:35
    CJS-00288  Could not update database statistics.
    <br>DIAGNOSIS: Command brconnect -u / -c -f crsyn -o SAPP47 returned
    3.<br>SOLUTION: See brconnect.log for details.
    Can anybody tell what could be the problem.
    Thanks in advance

    Hi
    Thanks for your reply. Following are the details of file brconnect.log:
    BR0801I BRCONNECT 7.00 (16)
    BR0999E Loading of SQL client library oci.dll failed - please check Oracle configuration
    BR0310E Connect to database instance P47 failed
    BR0280I BRCONNECT time stamp: 2008-04-30 09.10.35
    BR0804I BRCONNECT terminated with errors

  • Table could not be activated - Error while transport

    Hi all,
    I've created a table in one server under a transport request. Co-file and data-file are download for the same and imported into another system (development server). Import is successful and working fine. But, while transporting the table to quality server following error is coming even table is activated.
    Table TABNAME could not be activated (E- Nametab for table TABNAME cannot be generated )
    Kindly let me know what might be the problem.
    Thanks in Advance.

    Hi Siva,
    First check Transport request for extended check and consistency check. You will get errors. If there is no errors then goto se14
    database utility and give the table name and click edit and select the adjust database table . Your problem will be solved.
    Let me know if you have any further errors while doing this.
    thank you
    srinivas

  • SQL version could not be verified error while installing the SCOM 2012 R2 reporting component

    I have the below SCOM server roles in my SCOM 2012 R2 set up
    1) All servers with Windows Server 2008 R2 SP1, MS - SCOM1, DB & DW - DB1, Reporting Server - DB2
    2) All the DB servers with SQL 2012 SP1
    3) Windows firewall is turned off on all the servers.
    4) Success fully installed all the components except SCOM reporting.
    While installing the SCOM 2012 R2 reporting component on DB2 ( Iam running this set up on the server where I instllaed the SQL DB engine and reportin services in Native mode. Configured the SQL reporting database and reporting URLs successfully in SQL reporting
    configuration manager) getting the below error in the Rporting server instance page. Kindly advise.
    I ran mofcomp.exe and there is no firewall restrictions. My account also has DB owner & sysadmin permissions.
    Also tried re installing the SQL on Reporting server.
    "The installed version of SQL Server could not be verified or is not supported. Verify that the computer and the installed version of SQL Server meet the minimum requirements for installation, and that the firewall settings are correct. See the Supported
    Configurations document for further information".

    Hi,
    As far as I know, after installing SSRS, we don't need to configure the database and reporting URLs manully. When we install the reporting service for SCOM, it will configure those automatically.
    If possible, you may re-install SSRS and then install SCOM reporting service.
    Regards,
    Yan Li
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Document could not be saved error while using BAPI_BUSPROCESSND_SAVE

    Hi All,
    I am using BAPI_BUSPROCESSND_CHANGEMULTI and BAPI_BUSPROCESSND_SAVE to change the status of the CRM Service Order.
    The BAPI_BUSPROCESSND_CHANGEMULTI is working fine without any errors, in return table(zero entries), so after this I call the BAPI_BUSPROCESSND_SAVE with save_frame_log = 'X' and update_task_local = '' with the objects_to_save having the guid.
    I get an error 'document could not be saved' but still the service order is having the status, which I try to update, in the Item details.
    I had gone through the forums, for similar kind of error, and did not find any concrete solution for this error.
    Could you please let me know how to rectify this error.
    Regards
    Sunil Kumar P

    Hi Sachin,
    Still the same error.
    I had debugged the code and found that the FM 'CRM_EVENT_PASS_INFO_EXE_OW' called internally is failing to generate the events required for save.
    The next step of this is deleting the objects to save and inturn , the error.
    The events are filled based on entries in table 'gt_plan_exets' in the FM, but for me the table is blank.
    I tried to find how this table is getting filled, but I could not trace it.
    Regards
    Sunil Pasunooti

Maybe you are looking for

  • Flash player crashes in OS X 10.6.2

    Hello, Flash Player (plugin) 10.0.42.34 crashes in Safari 4.0.4 under Mac OS X 10.6.2.  The previous version did the same thing which is why I updated it in the first place, I cannot seem to find any help here or at Apples support site.  Running in t

  • Need help creating a fillable PDF form from a Word Doc coverted to PDF

    Hello, I recently switched from the downloaded program to the monthly "subscription type" of adobe "cloud".  Previously, I was able to select in "Tools" the option to insert blue text boxes in my PDF where customers could fill in  info and return to

  • What application should i use to create the xml data as the input data for XFA template

    HI, I need to generate pdf or html document form from existing XDP with the given xml formatted data set. We usually use word to generate content for those XFA template, as the data should be in xml format content in word document should be able to c

  • Need help with error message after failed iSync: Leopard and Palm OS

    I recently upgraded to a new computer which came with Leopard installed. In my old computer, Tiger OS, all was well when syncing to my Palm device. I tried going from handheld to desktop with slow synch turned on in iSync and now I get this message r

  • Exact weight of RAW material

    Hello, our scenerio is QM is activated for raw material inspection. Procedure is 1) Raw material(in stone form) came in truck. 2) in gate it is weight(Gross) is taken. 3) it is quility checked. if it is clear, truck is unloaded. 4) after unloading tr