Coupon Apps and How they work...

I would like a coupon app, but am confused about how they work?  Do you scan the barcoad of an item at the store and see if it finds a coupon for you?  And if a coupon is found, does it display a coupon for you to use at the register when you pay?
For those of you that are using a coupon app, could you explain how it works?  I would appreciate it.

I have used the old MyCoups app. The bar code was not available then. To get coupons, what I did was I sent them to my email address. After they were on my email acccount I printed them out. I know the new app includes the bar code thing. You can scan a barcode and after you do that, it'll show you where you can buy it

Similar Messages

  • PDF forms and how they work with different Reader versions

    I'll start this off by giving a little background information and describing a workflow scenario. I work as an InHouse designer for a company that keeps the majority of the employee population always a few versions behind. Fortunately, for us designers they keep us updated, but it doesn't always play nicely when you're saving your PDFs for older versions of Acrobat Reader.
    What happens is that I create a form in InDesign, export a PDF, and then create my form fields in Acrobat Pro 9 on a Mac. After saving for version 9 I then take the PDF and test within the Windows environment which our IT is enforcing Acrobat Reader 7. The PDF opens ok and I can fill out the form, but I cannot save. I then open in Acrobat Pro 7 for Windows and then it gives the option to save or make modifications.
    My questions really come down to whether or not Reader 7 is doing this because of how old the technology is, or if that would change if our IT would allow Acrobat Reader 8 or 9? Now I've looked at the Acrobat Pro 9 comparison chart and it states "Enable users of Adobe Reader®   (version 8 or later) to fill in and save PDF forms locally." Does this mean that we just need version 8 or 9 and then people can save the form? What in version 7 is causing us not to be able to save? Did that change the technology in some way? I'm trying to figure out if we get IT to upgrade users to Reader 9 if this will solve the issue or will they have to install Acrobat Standard/Pro 9 to save a PDF form?
    What other selling points could we make to our IT department that using Reader 9 is a lot better than using Reader 7? Any technology benefits, security or functions?
    Thanks

    ~graffiti wrote:
    No version of Reader can save a filled in form unless it has been enabled first.
    To enable, open the file in Acrobat then go to Advanced>Enable usage rights in Adobe Reader...
    And for my standard disclaimer, if you are going to use the forms in a corporate environment, be sure to study and understand the usage limits for enabled forms (the limit is 500 uses, but there are caveats to that) in the EULA. Mostly the enabled forms are meant for very small time users. If you do not meet that requirement, Adobe sells another product that can enable files for unlimited uses but it costs in the tens of thousands of dollars and is a server side solution.
    Hey Graffii,
    I enabled the usage rights and that did help with saving in Reader 7. I am a little concerned about the limit of 500 uses. Let me try and understand you a little better. I have a PDF that has a couple form fields and you're saying that the PDF can only be opened 500 times? I've never heard of restrictions on PDFs before. Does this happen after you place just 1 form field? How do I find out more information? I looked in the EULA, but found nothing.
    Also, what does Adobe mean here "Enable users of Adobe Reader®   (version 8 or later) to fill in and save PDF forms locally." Are they saying that you need Reader 8 or later to read a form or that you need Acrobat Pro 8 or later to enable the form feature?
    It's all very confusing because one of the features they tout in version 9 is the ability to save forms locally, but once I enable the form I could save it with Reader 7. It's hard to tell if they are referring to Reader 9 or Acrobat Pro 9.
    Thanks

  • Skype phone numbers and how they work?

    ok so here is what I know. With skype you can choose the country of the phone number you want your phone number to originate from. So if I choose my number to be an Australian number any person calling me from Australia will be charged at a local rate if from the same state.
    This is my question.
    If I set up my phone number to be an Australian number, then I travel overseas to Canada and someone calls my number, what will the rate of charge be for the caller? will it still be a local call since the number is an Australian number or will it not work at all????
    And will I in return be able to call back to Australia at a local rate since my number is australian??
    Also, Im assuming I need to be connected through wi-fi for someone to call my skype account from a land line phone?

    Kristle wrote:
    On my bill there are several int/md messages with no phone numbers
    That is your phone accessing the internet, or media data.  Generally this was how older phones that accessed WAP sited reported their usage, instead of the way newer phones using the WWW report usage.

  • Smart Mail Boxes and how they work?

    I am having some difficulty with Smart Mail Boxes, either that or I am not understanding them correctly
    So I created a Smart Mail Box so that all the mail which included a particular recipient would go into it, which it does. But I also have the mail in my in-box as well
    What I was hoping is that all that particular mail would just go into the smart mail box and not be in the in-box.
    Am I doing something wrong?
    Any help would be appreciated.
    Philip

    No, you are not doing anything wrong. The original e-mail stays in your inbox until deleted, which will also delete it from the Smart Folder. The Smart Mailbox is a 'sorting' tool,but it doesn't actual contain the e-mails.

  • Require material on Delta's and how they posted from LO extraction to BW

    Hi All,
    Can any body send "material on Delta's and how they posted from LO extraction to BW and tell the scenario's"
    Plz reply back me to [email protected]
    Regards,
    Kiran

    Hi Kiran,
                I have sent some information that what are delta that we use for
    delta and how they work.
    If you need any clarification let me know.
    Thanks
    If useful assign  some points

  • Better process for introducing new features and explaining how they work

    There are all kinds of new features being added to the Creative Cloud app but knowing what they are and learning about how they work isn't the most user friendly process. The current process is read the release notes after updating to a new version. The release notes should hyperlink to the related features in the product help. It would be great if there was a "What's New" section for the Creative Cloud app itself with new releases which included an introduction to new features just like there is for the desktop products.

    This is a poorly explained reason about why is so important having a loupe in Photoshop. I've not also, used the best example, but I will. This belongs to the ADDITIONAL FEATURES: Loupe/Magnificator View:. Also, I will try to make my english clrearer, but here it goes:

  • Appletv remote app and airplay not working with iphone 4S

    I have the latest appleTV.  I have the remote app loaded onto my ipad3 and iphone 4S.  The app is not working with iphone 4S, nor do I get the airplay icon, hence I can't mirrior my phone on appleTV.  It used to work.  I have deleted and reloaded the app, and still nothing.  It worked fined until a month ago or so.  I have enabled home sharing.
    The app and airlplay are working just fine with the ipad3.  I have the ipad and appleTV hooked up to my router using 5Ghz, and the iphone only connects to the 2Ghz network on the same router.  I don't think this is the issue, because it worked before.
    Also, when I click on the remote app on the iphone, to add an itunes library, a code pops up on the phone, which I enter into itunes on my Win7 PC.  Nothing seems happed on the computer when I enter the code.  Could this have anything to do with recent appleTV or itunes updates?  Any possible solutions?

    It seems like I am having the same problem.
    I have the latest AppleTV 1080, imac 27", ipad, ipad2, 2 iphone 4, all with the latest iOS. After I have the AppleTV connected, a few problems showed up:
    (1) ipad plus iphones cannot airplay photo to AppleTV. After the play button and the grey screen displayed "the playing msg on AppleTV", nothing happened. it is the same for ipad/iphone.
    (2) iMac not Airplay to AppleTV
    (3) Airplay Mirroring not working
    The following are done:
    - Home sharing enabled
    - To test the devices are connected. I set a passowrd for Airplay and the ipad/iphone both requested for it so they are network and devices are ok

  • When you delete an app from your homescreen it is still in the cloud, does that mean you still have the app, and how do you get it back on to the home screen

    When you delete an app from your homescreen it is still in the cloud, does that mean you still have the app, and how do you get it back on to the home screen. new to ipad so do not know much. Anybody know.p

    As long as the app remains in the store then you can re-download it via the Purchased tab in the App Store app, or via the Purchased Link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
    Similarly ibooks can be re-downloaded, and depending upon what country that you are in then music, films and tv shows may also be re-downloadable (if they remain available in the store).

  • Crop Marks – is this how they work?

    I haven't had to use crop marks before – my books have been printed on sheets the same size as the InDesign page. Now however, I am about to print a small book, 4-Up, on sheets larger than the page size, so I will need to add crop marks. I want to run my understanding of how to place crop marks on the page and how they will be used by the guillotine man, past some of the experts on this forum.
    And before anyone says: "Crop marks are the printer's job. Just let him do it", or somesuch comment – in this case it's not the printer's job, it's mine. I've chosen to do everything: the writing, the layout, purchase of the paper (910 x 650 sheets), the cutting of the paper, the imposition, the printing, arranging the cutting of the sheets, and then the binding. So, I need to know about crop marks. This is what I have discovered, or guessed (please correct me if I'm wrong):
    Assume a page size in InDesign of 100 x 200 mm. When you export to PDF and tick Crop Marks and set Offset to a certain dimension, two things happen:
    The page size is increased to (100 + 2 (Offset + 5.3)) in width, and (200 + 2 (Offset + 5.3)) in height. In the case of an offset of 5 mm, the page dimensions of the PDF become 120.6 x 220.6 mm.
    Crop marks of 5.3mm in length (5/12"), are placed at the four corners of the new page pointing inwards to the original page size. Thus, in this case, there is a gap of 5mm, the chosen offset, between the end of the crop marks and the original page. This offset allows for movement of the sheets during printing, so that when the crops are made the crop marks won't appear on any of the pages. i.e. the offset is greater than the expected sheet movement.
    The guillotine man, when he comes to cut the sheets, lines up the narrow beam of light from the guillotine with one of the crop marks – and cuts that edge. Now there are only two crop marks left because two have been cut off in this first cut.
    The guillotine man then rotates the sheets 90º and cuts again. Now there is only one crop mark left.
    The sheets are again rotated, the beam of light lined up with the remaining crop mark, and the third cut is made. There are no more crop marks left.
    For the final cut, the sheets are rotated 90º, but as there are no crop marks left, the appropriate dimension has to be entered into the guillotine (or marked out on the top sheet), and the cut is made.
    I have yet to confirm with my guillotine man that steps 3-6 describe how he will do it. That's simply how I imagine it would happen. And in the case of 4-Up, a couple of extra cuts will be needed in the centre, depending on how the imposed pages are positioned.
    Is the above an accurate description of how crop marks are inserted and how they are used?

    Thanks for the responses.
    Stix: Personally if adding Crop marks in InDesign (I prefer to use an imposition program) I like to make them even numbers, e.g. 3mm offset and 7mm long crop marks, whoch give a PDF size that is bigger by 10mm on each side.
    Yes, it would make it easier if numbers were whole integers. But how do you tell InDesign to make a certain-length crop mark? I assumed it was fixed at 30 point (5/24" = 5.292 mm).
    cdflash: I'm sure there are good answers to all of these questions but they are not in the opening post.
    I tried to keep my question as simple as possible, hence I didn't elaborate. But to answer some of your queries…
    Or is the OP going to impose each sheet with 24 pages to view?… I am imposing using only InDesign using a method I developed. It's a very flexible method and works beautifully for 2-Up and 4-Up. Some of the imposition software I trialled several years ago was highly sus and not capable, for example, of generating variable-length signatures. I suppose the up-market programs would be okay, but I can't justify spending thousands on a program I might only use a few times.
    Out of interest: can the software you suggested, Creo Preps, impose with these signature lengths: 6,6,4,4,4,8 (numbers of sheets per signature; total 128 pages)?
    How many pages are in the book? How many copies of the book are required?… Size of Coracina is 148.5mm x 191 mm, 128 pages, 50 copies. The figures I gave for page size were examples only.
    … and impose so that the pages get cut out as single pages and then hand-collated?… Printed sheets are 4-Up on SRA3. I chose SRA3 late in the piece when the printer told me that the click-charge was the same no matter what the paper size. Prior to that I was intending to print on A4. Printing costs are now halved.
    Why is the OP handling this and not the printer?… I like a challenge, I like to be in control of the process, I like to learn, and I like to save money.
    Tanksinker
    Check out the images at the bottom of https://sites.google.com/site/tanksinker/Home/max-burns-tanksinker if you'd like to see how I make a book. Doing it all myself results in huge savings. Tanksinker cost me about $10,000 all up, only half of which I got back in sales. It's a hobby. I don't expect or want to profit from it. To print 50 copies of Tanksinker commercially, judging by what a local offset printer told me, would have cost $50k-100k for the plates alone (2 proofs, 400x4 plates each proof, $20-30/plate).
    Coracina
    I have been to see the guillotine man after reading all the posts above, and he confirmed that the crop marks I was using would be suitable (I just drew them on a piece of paper; I didn't show him the real thing). He did make a useful suggestion: he would trim the SRA3 sheet along the top and bottom of each book-spread (4 horizontal trims), but not trim to the left and right crop marks (vertical trims) because that would be done anyway when trimming the fore-edge after the book was sewn and glued.
    A sample page of Coracina, with crop marks ready for printing, can be downloaded here: http://www.mediafire.com/?5eidx1c61o7jrjx
    Printing of the first three copies is tomorrow morning, Tasmania time. If the crop marks on the sample, or any other aspect of the layout looks in any way sus or likely to cause problems, please let me know.
    Oh, and I should add that Coracina is my partner's book. Way too girly for me. I'm just the technical consultant, shall I say.

  • I want to know about imessages and how it works !! how to register a number with imessages?? I saved a number in contacts but when I try to send a message it say "! not delivered" in red mark.How can I fix this problem??

    I want to know about imessages and how it works !! how to register a number with imessages?? I saved a number in contacts but when I try to send a message it says "! not delivered" in red mark.How can I fix this problem??

    Perhaps something in this support article will help:
    http://support.apple.com/kb/TS2755
    Regards.

  • What is Relationship table and how to work on that

    Hi MDM Gurus,
             Can anybody please let me know regarding Relationships table and how to work with that. I am aware of all the other MDM concepts.
    Regards
    Yugandher

    Hi,
    Relationship tells how the records from main table and subtable are related to each other. We need to first create the entry in relationship table from MDM Console. MDM support two types of relationships:
    1. Parent/Child Relationship - Applicable for all possibilities of main and lookup table
    2. Sibling Relationship - Applicable only for Main table records
    For More information refer the below links
    1. What are Relationships and how to create them
    http://help.sap.com/saphelp_mdm550/helpdata/en/8e/9f9c427055c66ae10000000a155106/frameset.htm
    Repository Maintainance -> Repository Structure Operations -> Relationship table
    2. How to work with Relationship table
    http://help.sap.com/saphelp_mdm550/helpdata/en/43/e0615f82b40a2ee10000000a11466f/frameset.htm
    Record Mode -> Editing Relationships
    Regards,
    Jitesh Talreja

  • I suspect a spy app on my iphone 4 that somebody watching my calls/ voice conversation. Can somebody help me to identify the app and how to remove it?

    I suspect a spy app on my iphone 4 that somebody watching my calls/ voice conversation. Can somebody help me to identify the app and how to remove it?

    No spy app can be installed on iphone which is not jailbroken.
    For example iKeyMonitor iPhone spy can not be installed without jailbroken.
    http://ikeymonitor.com

  • What is the meaing of the sysmbolic constant value in the header file for UIR file and how they are used

    In labwindows after creating the uir then header file is create automatically. There it has define some symbolic constant. As examples of colview.h(from the examples of labwindows )
    #define  MAINPNL              1       /* callback function: MainPanelCB */
    #define  MAINPNL_RESULTS      2     /* control type: table, callback function: ResultTableCB */
    #define  MAINPNL_NEWTEST     3       /* control type: command, callback function: NewTestCB */
    My question is how these values 1, 2 and 3  were selected and how they are used in programs ?
    If anyone explains, it will be a great help.

    When creating a UIR file, CVI editor takes care of assigning constants to the panels / controls you create in it.
    The conceptual framework is the following (assuming to treat the file you have reported in your message):
    - Within a single UIR file all panels have a unique ID, which is the one you pass to LoadPanel when loading a panel into memory. LoadPanel (0, "myfile.uir", MAINPNL); is then translated to panelHandle = LoadPanel (0, "myfile.uir", 1); , that is: "load the first panel in the uir file". The panel in memory is then assigned a handle, which is guaranted unique by the OS and saved in panelHandle variable
    - Addressing a control in a panel is done e.g. using SetCtrlVal (panelHandle, MAINPNL_NEWTEST, xxx);  , which again is translated to SetCtrlVal (panelHandle, 1, 3);  that is: "Set control #3 in the panel identified by panelHandle to value xxx".
    You must not modify the include file associated to the UIR as it is fully maintained by the IDE and is rewritten each time you save the UIR file.
    That conceptual framework has some advantages and some caveats:
    - You can load the same panel more then once in your program: each instance is independent from the others as each panel handle is unique; in some occasions it may be helpful, e.g. if you need to handle several identical equipments connected to your PC and you can load the same control panel for each unit connected maintaining each of them independent
    - If the panel handle is wrong, the system does not warn you of this as it does not know of the symbolic names you are using; if you try that SetCtrlVal command with a wrong handle you are trying to manipulate a control on a panel different from the one you intend: supposing actual panel idientified by the handle has control #3 the maximum you can expect is that you receive an error in case you pass e.g. a string to a numeric, but if controls are of the same type you have no errors or warning at all! This is particularly important when addressing controls on pages of a tab control: each page is really a separate panel with its proper handle that you must retrieve with GetPanelhandleFromTabPage command before addressing the controls on it
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

  • Colored Calendars on iPhone--And how they don't work.

    Ok. Let me start by asking Steve and Apple, "***?!"
    I use colored calendars. They help [me]. I can visually look at my week view and determine how much of my week consists of work, and how much consists of play. Oh, and look, there's my silver calendar, it's someone's birthday on Saturday. And there's a red box, so that means my team is playing on Sunday. Colored calendars are great...but why don't they work properly for the iPhone when they sync??? This is the most ******** thing I've ever seen.
    My Blue (Personal) calendar is Orange on my iPhone. My Green (Work) calendar is Purple on my iPhone. Oh and guess what? My Holidays, Birthdays, and other calendars are other colors too. Do you know why my personal calendar isn't orange on my iCal? Because I hate the color orange. I made it blue for a reason.
    Why would they enable colored calendars without a) just making them sync to what the calendars are on iCal, and b) not giving you the option to edit the colors. I mean, if they're not going to just make it a proper sync, the least they could do is allow me to adjust the colors, right?
    This is just one more thing that the developer of the 2.x software didn't think of.

    An Apple kbase article 'explains' this (really, I would call it more of an excuse than an explanation!).
    Each calendar is assigned a different color to allow you to easily identify which appointments belong to which calendar and _this may not match the exact color used on the computer_.
    In the meantime, there is a workaround, although it is something of a pain. The iPhone will apply calendar colors in the following order: red, orange, blue, green, purple. (If you only sync one calendar, it's blue).
    Depending on the colors you want, you first need to create 'blank' calendars in iCal to 'use up' unwanted colors. Then, you need to sync the calendars, one at a time, in color order.
    Go to the Info tab (in iTunes with the iPhone connected and selected in the devices list). With the Sync iCal calendars box checked, UNcheck all the boxes and sync. Then, check the box for the calendar you want to be red. Then sync (if you look on the iPhone at this point, that calender will be blue, since it's the only one). Then, check the box for the calendar you want to be orange, then sync. Repeat for blue, then green, then purple.
    For example, if I want to have two calendars, Home colored blue and Work purple, I would create three new calendars - empty1, empty2, empty3 - then check the boxes in the following order, syncing between each: empty1, empty2, Home, empty3, Work.
    Also, you can submit feedback to Apple: http://www.apple.com/feedback/iphone.html.

  • Mail and OS: how they works with dns

    Hi to all.
    I need an help to understand.
    I have a domain, "pippo.it"; this domain has an MX set in this way:
    pippo.it MX mail.pippo.it
    mail.pippo.it A 151.99.0.100 ; Wan 1
    mail.pippo.it A 91.45.98.76 ; Wan 2
    With this setting I'm sure that if one line does down, my email server is always available for the other line.
    I made this setting and I watched the server and all seems to be running fine; with Wan 1 down, I always receive emails.
    The problem I have is when I try to download emails from a client.
    IF my mac, during resolving of mail.pippo.it, receives the IP that belongs to the line down, it's not able to try the second one.
    Can anyone explain to me HOW the OS and Apple mail works in this situation?
    Any suggestion is welcome!
    Rob
    Pls save XServe!

    No problem with Calendar but Mail keeps syncing with the server.  The activity window is full all the time - apparently re-syncing though no new mail is downloaded.  Rang in but they have no idea what's causing it and have sent diagnostic to engineers.  In 10.8, just a quick burst of activity when mail was checked for but now it's constant.  As a result, emptying the Deleted Items mailbox is very slow.  Am worried about the amount of bandwidth being eaten up.

Maybe you are looking for