Coutinue the page numbers even after section brake

Hi,
In my report i am using section brake between 2 tables to start second table rows from next page.
i need to continue the page numbers from table 1 to till the end of second table.

Friend where I can find in the BI PUBLISHER the option to edit this code where I put it?

Similar Messages

  • Just got a new imac and my iwork software wont work. I have the serial numbers but after migrating from my old mac running OSX tiger it won't even give me that opportunity. I do not have any discs as this was downloaded. Help

    Just got a new imac and my iwork software wont work. I have the serial numbers but after migrating from my old mac running OSX tiger it won't even give me that opportunity. I do not have any discs as this was downloaded. Help

    Hi, hopefully you guys can help me out, I just
    purchased a G5 iMac to replace my aging dell desktop,
    and now i'm more or less completely os x dependant
    (I've had an ibook for a few months now). Anyway, I
    have a few questions:
    1. Does anyone know of a (free) mail notifier tool,
    that will alert me when I recieve new pop3 mail? I
    used to use AIM for this in windows
    The built in email program does sound an alert for new messages.
    2. Anyone know of a good (free, again) IRC client?
    iChat works well.
    3. I noticed earlier that my screen was flickering,
    it seems to have subsided for now, but is that normal
    to encounter in a new display? It wasn't really bad
    flicker, but I could see it.
    No idea.
    4. I leave my desktops on 24/7x365, will that be a
    problem with this iMac? Display shuts off of course
    after 30 mins
    You could set the iMac to go to sleep after non use. My Macs are
    always sleeping when not in use, waking them up takes seconds.
    Unlike windoze, never knew if it would be locked up or not.
    5. Should I get the extended warranty? I'm usually
    against them, but I am expecting this computer to
    last me at least 3 years (for $1300 it better!)
    before I upgrade, as I got that much out of a Dell
    and from what I understand, Mac's do not age nearly
    as fast as Windows pc's.
    It is well worth the cost. Never know what might happen. Also
    it is good insurance for future upgrades. I traded in my G4 tower
    purchased two years ago for 75% of what I paid for it. Apple care
    transfers, giving the buyer the remainder of your warranty.
    Thank you for any help,
    -Evan

  • Creating PDFs using Adobe Acrobat 9 Pro and can only see the first 10 pages in PDF even when the page numbers on bottom state 10 of 13 (or any number greater than 10).

    PDFs create great, unless they should be over 10 pages and then it appears the data was converted to PDF by viewing the page numbers at the bottom of the PDF but you can only view the first 10 pages in the pdf file.

    Hi stephaniec0103,
    Could you please let me know what exact dot version of Acrobat 9 and OS you are using.
    Have you tried repairing Acrobat from the Help menu?
    Acrobat 9 is an older version and incompatible with new OS versions, so I would suggest you to try using Acrobat XI (latest version) and check for the same.
    You may download a 30-day free trial version of Acrobat from the below mentioned link:
    Download Adobe Acrobat free trial | Acrobat XI Professional
    Let me know how it goes.
    Regards,
    Anubha

  • Let's say I have a document that is 5 pages long. Now I want to insert the page numbers, starting on page 3 with the number "3" and leaving out pages 1 and 2. How do I do that?

    Let's say I have a document that is 5 pages long. Now I want to insert the page numbers, starting on page 3 with the number "3" and leaving out pages 1 and 2. How do I do that?

    I just found the answer myself. I don't know how to delete my question, so I'll just write the reply to the answer - just in case somebody needs to know: Insert a section brake after the second page and then choose "Start on 3".

  • Page numbers incorrect after conversion from Excel to pdf

    Page numbers incorrect after conversion from Excel to pdf
    ""This above link (thread:834599) is from a case back in 2011 that claims to solve this problem, but it does not solve this problem. I think that customer only cared about having continuous page numbering, not discrete page numbering per sheet.
    ========================
    I still have this issue in Acrobat XI and MS Office Professional Plus 2010. I keep upgrading to no avail. This regression has resulted in a huge time drain for me. If you fixed it, please explain how I can get my hands on the resolution.
    Previous versions of Excel and Adobe Acrobat enabled flexibility around the "Page #" of "Number of Pages" (Page &[Page] of &[Pages]) token, depending on context and usage. The "# of pages" token could represent EITHER the number of pages in the workbook OR the number of pages in the tab/sheet, depending on how you generated the PDF:
    You could select "Selected Sheets" and then select all or some of the individual sheets in the workbook, and the PDF would honor the discrete numbering of each of the sheets, so the first page of each sheet was p1 and the "# of pages" was the number of pages in the sheet; not the number of pages in the workbook; or
    You could select "Entire Workbook" and the PDF would honor continuous page numbers across all sheets, as a single document.
    Now, it only honors the total number of pages in the workbook, regardless of the method you use to publish to PDF: saving as PDF, printing to PDF, using "createPDF" from Acrobat plugin to Excel's menu ribbon; selecting all sheets, some sheets, or Entire Workbook; automatic First page number or "1" under Page Setup > Page> First page number. (This last option, btw, does restart every sheet at p1, but it hardly makes sense if the total number of pages is still the total number in the workbook instead of the number in the sheet.)
    I spent a lot of time trying each which way that the blog posts recommended and have tried this on multiple versions of Excel and Acrobat now.
    NONE of these time-consuming experiments gave me what I wanted.They all insist that "Page #" of "Number of Pages" (Page &[Page] of &[Pages]) is the total number of pages in the workbook or the total number of pages in the selected sheets combined.
    The numbering are correct in Excel Page Layout.
    The same issue happens when using LibreOffice calc. (Although, I never tested with Libre Office before, so I don't know that it ever worked).
    The workaround now is to create PDF for each spreadsheet one at a time, and then compile them using the Acrobat combine/binder feature. All alternatives are extremely time consuming and tedious. It used to be automatic. This is a major regression that has gone untreated for over a year now, maybe two years.
    My task takes infinitely more time to complete than it did with previous versions of Acrobat. That means that days are added to my project, when the functionality used to enable a quick pdf generation that was ready for review, now I have to do this very manual time-consuming set of steps to generate a draft. As the project has grown and more tabs are added, my pdf-generation task takes that much longer. We require lots of drafts. It used to be easy and fast. Now it is hard and time-consuming.
    In my opinion, the problem is not Excel; it is Acrobat because it was introduced with an upgrade in Acrobat, not an upgrade in Excel. The problem was introduced in Acrobat 9 or 10. Please provide a patch or add-on or something.

    If you are setting up the page numbers in Excel, the resulting PDF would display the the page numbers created in Excel. On Excel 2010 support page, (http://office.microsoft.com/en-us/excel-help/insert-and-remove-page-numbers-on-worksheets- HA010342619.aspx#BM2) is stated the following "tip" which indicates by default Excel 2010 starts numbering each tab with 1. Exel's workaround tip is below - 
    Set a different number for the starting page
    Tip   To number all of the worksheet pages in a workbook sequentially, first add page numbers to all worksheets in a workbook, and then use the following procedure to begin the page number for each worksheet with the appropriate number. For example, if your workbook contains two worksheets that with both be printed as two pages, you would use this procedure to begin the page numbering for the second worksheet with the number 3.
    On the Page Layout tab, in the Page Setup group, click the Dialog Box Launcher next to Page Setup.
    On the Page tab, in the First page number box, type the number that you want to use for the first page.
    Tip   To use the default numbering system, type Auto in the First page number box.
    Also helpful in the same section is the note on viewing page numbers. To see if the page numbering dilemma originates in Excel make sure you are using the Page Layout View see below:
    Hide All
    If you want numbers shown on pages when you print a worksheet  you can insert page numbers in the headers or footers of the worksheet pages. Page numbers that you insert are not displayed on the worksheet in Normal view — they are shown only in Page Layout view and on the printed pages.
    Overall it may be easier not to create the page numbers in Excel but instead create then in Acrobat using the Headers and Footers option in Acrobat.  I hope this helps - it sounds like a frustrating issue you are experiencing.

  • Problem in resetting the Page numbers

    Hi,
    I am using to print PO report using XML publisher.
    The layout that is needed is
    Header
    ---- It cointains page number x of y ,po number,po creation date,and other details.
    Body
    ---- It cointains po lines and po headers data.
    end body
    After the body ends we need to print Service note in a seperate page.But this service note should not have header and the pages of the service note will not be included in total pages of the PO.
    If the PO is 10 pages and service note 2 pages then the total page of PO should be 10.
    This is for one PO.We have to print many number of POs in a single request.
    Presently the problem is that for resetting the page numbers of service note I am using a section break after the end of body.What it does is it reset the page number.But the problem is first all the POs are displayed then its service note.But I need one PO and then its service note .Then the second PO and its service note.

    I have used the following method to call the template based on IF condition as follows:
    The way I expected the outcome is:
    if the COPY_ORIGINAL variable's value is '(Copy)' then it shoud print once the template with a label '(Copy)' in it.
    else
    if the COPY_ORIGINAL variable's value is '' (empty) then it should print 4 times the template, with different labels as: 'Original' , 'Accounts Copy', 'FP Store Copy' and 'Gate Copy'
    the way I used the xml tags is mentioned below:
    <?if: COPY_ORIGINAL='(Copy)'?>
    <?call:TC?>
    <?end if?>
    <?if: COPY_ORIGINAL=''?>
    <?call:TC1?>
    <?end if?>
    <?template:TC1?>
    <?for-each@section:xdoxslt:foreach_number($_XDOCTX,1,4,1)?>
    <?if: position()=1?>Original<?end if?>
    <?if: position()=2?>Accounts Copy<?end if?>
    <?if: position()=3?>FP Store<?end if?>
    <?if: position()=4?>Gate Copy<?end if?>
    <?for-each:/SFFONT001/LIST_G_HEADER_ID?>
    <?call:TC?>
    <?end for-each?>
    <?end for-each?>
    <?end template?>
    <?template:TC?>
    <?ORDER_NUMBER?>
    <?end template?>
    In this case, it won't call the template TC1 and reset the page numbers, instead it prints the page numbers continuously.. (no resetting of page numbers)
    why the following If statement:
    <?if: COPY_ORIGINAL=''?>
    <?call:TC1?>
    <?end if?>
    is not working for the statement:
    <?for-each@section:xdoxslt:foreach_number($_XDOCTX,1,4,1)?>
    Please update...
    regards..,

  • How do I add page numbers to my document without the page numbers automatically changing. I do not want the page numbers the software automatically places into my document.

    How do I add page numbers to my document without the page numbers automatically changing? The title page is blank, I can type in 1 on the 1st typed page, but the #1 automatically goes into the next page and will not change.

    Click at bottom of the first page:
    Menu > Insert > Section break
    Click somewhere in the 2nd page (not the header/footer)
    Inspector > Layout > Section > Page Numbers > Start at 1 > Configuration > uncheck use previous headers and footers
    Click into the header or footer of the second page:
    Menu > Insert > Auto Page Numbers…
    If there is anything in the header or footer on the first page that you don't want just select it and delete it.
    If you really wanted to manual place page numbers on each page you will have to use a section break between each and every page. I can't imagine that would be useful.
    Peter

  • My InDesign document has two page 1s and I can't get the page numbers to work.  Help!

    My InDesign document has two page 1s and I can't get the page numbers to work.  Help!  How do I fix this?

    Do you mean the first section is starting at page one?
    And the second one now is starting at page two?
    So I would ask why you would need sections at all?
    Did you set the controls for Automatic Page Numbering?
    If you select the particular page where section two is starting in the Pages Panel, you could untick the Start Section option in the numbering and section dialog. That would remove the section. You cannot do that with the very first section, but you should set the first section to Automatic Page Numbering if you ever want to use your document with an inDesign book file.
    Uwe

  • How do I put page number at the center of the bottom of page one and the rest of the page numbers at top right corner?

    How do I put page number at the center of the bottom of page one and the rest of the page numbers at top right corner?

    Put a section break at the bottom of page 1
    Then insert your page number in the footer of page 1.
    Go to page 2 and click in the body of the text;
    Inspector > Layout > Section > uncheck Use Previous Headers & Footers > click in Header on page > insert > Page Number
    Peter

  • How can I edit the page numbers I've inserted?

    When I click on the insertion cursor, the options in the Section>Page Numbers cannot be accessed. Same as when inserting from the Insert>Page Numbers menu. I tried deleting the page numbers, hoping that the settings would go back to default, only to find that it goes back to the previous style/settings.
    I browsed the other threads in vain of a solution. I hope an expert could help. Thanks!

    nope. i did this on pages '09 from scratch. i was following a pre-designed template from photoshop so I did every technique i could to make it appear closely as possible to the design.
    i achieved the header by inserting tables instead of ordinary text and background.
    what else should i be telling?

  • CIC web clint page loding but after section is ending massage coming.

    All
    I am in sap ides 4.0 I am trying to login the web Clint thru the BSP application in the se80 t code I got in to that code select the BSP application after that cic_ic and F8.
    New internet explore opened and asked for user id password after that. The page is loding after that no action but I refresh the page it is saying that ending the section.
    with Regards,
    prakesh

    Dear
    I find that i am getting two types of run time errors when page loding i find this thru st22 list of run time errors.
    that are 20.10.2008     
    1.09:26:15     gopinath     SAPUSER     800     C     SYNTAX_ERROR               CRM_MKTTG_PROC_TG_FEXP_BATCH     1
    2.18.10.2008     14:05:55     gopinath          000     C     DBIF_RSQL_INVALID_REQUEST               SAPMSYST     1
    and i check in event viewer also in that it is showing that.
    SAP-Basis System: Transaction Canceled 00                  671 ( SYNTAX_ERROR 20081020092615gopinath                        SAPUSER     8001        )
    i did not get the OSS note.
    with Regards,
    Prakesh.

  • Excluding the index from the page numbers

    Hi,
    is it possible to exclude the index from the page numbers? My index is 5 pages long and I want the first page of the first chapter to start at page 1, not on page 6.
    Any hint? Anything to do with sections?
    Thanks!

    Solved, thanks to this topic:
    http://discussions.apple.com/thread.jspa?threadID=2046762&tstart=0

  • In pages(not the New version) footer is over to the left, so when i put the page numbers in they don't sit right. How do i move the footer

    In pages(not the New version) footer is over to the left, so when i put the page numbers in they don't sit right. How do i move the footer

    The footer is not only to the left. To get the page number to the right you can use Format > Align right. That will make all page numbers move to the right. Is that what you want?

  • I am using CC adobe Acrobat to combine multiple pdfs and add page numbers. Mac users can no longer read the page numbers but pc users can.

    I am using CC adobe Acrobat to combine multiple pdfs and add page numbers. As of about 2 weeks ago the mac users can no longer read the page numbers they get a font error message and see only -- where the page information should be. The pc users do not have this same problem. When I replace our regular font (URW Grotesk) with a system font (Verdana) everyone is able to read the page numbers. This is a new issues, I have been creating these documents in the same way for years without a problem. I have been on hold and on and off calls for the last two hours, I keep getting hung up on once I find someone in adobe support to talk to!

    Hi KnoopL,
    Are the Mac users using Preview to view the pdfs or Adobe Reader?
    Regards,
    Rave

  • Changed (renamed) device name in Intune app on iOS device. This change is not showing up in the admin portal, even after 24 hours

    Hi,
    I am trying to update a mobile devices names.  Initially, I changed the iOS device name (Settings->General->About->Name) and then I also renamed the device in the Intune app on the device.  Neither of these changes are propagating through
    to the admin portal, even after 24 hours.  Is there anything else I should be doing for this to work?
    Thanks in advance for your help.
    Simon.

    I'm seeing the same thing as Simon, I changed the iOS device name in both places on an iOS device and the name in the Intune console is still "iPhone" which is really unhelpful as I'm sure you can imagine.  Is there some other place
    that we should be going to rename devices so they are more easily identifiable in the Intune console?
    Thanks!

Maybe you are looking for

  • BEX Broadcaster does not work / open

    Hello, I'm trying to use the Broadcaster in BI 7 but when I try to open it (from the BEX Analyzer or the BEX Query Designer), it doesn't do anything, it even doesn't give an error. Does anybody know what could be wrong ? I've entered the standard web

  • This add-on will be installed when firefox is restarted

    When trying to copy a profile from desktop to laptop, using same firefox version, even updating laptop's profiles.ini to point to the same named XXXXXX.default as in desktop, I get that annoying but ALWAYS and I can restart firefox a thousand times,

  • Cannot download remaining images in mail

    . I have selected the option to download remote images in settings, but some emails will not open everything.

  • BRF Expressions and Events transport

    Hi Gurus! I kindly need a support in order to transport from a client to another of the same system all the BRF events and expressions created in tcode BRF for the process workflow. Can anybody suggest a way to do it, since I cannot find it. Thanks i

  • How can i make a ebook by flash

    i want to make a flash like this--> http://www.ns-tool.com/products. but i dont kown how to do it. (i'm a java coder) can you give me some advice? sorry to my english,and best wishes for you, thx~!