Cproject - Problem during exprort a project to ms project

Hi,
I use cproject tool to create the project: IT Project. The project schedule is exported to XML as following:
<?xml version="1.0" encoding="utf-8" ?>
- <cPr:cProjects xmlns:cPr="urn:cProjects">
- <Project>
- <ProjectData>
<NUMBER>P2</NUMBER>
<CONSTRAINT_TYPE>2</CONSTRAINT_TYPE>
<START_DATE_FIX>2007-09-13</START_DATE_FIX>
<CONSTR_TYPE_FIN>3</CONSTR_TYPE_FIN>
<FINISH_DATE_FIX>2007-09-20</FINISH_DATE_FIX>
<PRO_TYPE>000000000000001</PRO_TYPE>
<MASTER_LANGUAGE>E</MASTER_LANGUAGE>
<DESCRIPTION>ICT PROJECT</DESCRIPTION>
<ACT_WRK_UNIT_EXT>H</ACT_WRK_UNIT_EXT>
<SCHEDULED_START>2007-09-13</SCHEDULED_START>
<SCHEDULED_FINISH>2007-09-20</SCHEDULED_FINISH>
<CREATED_BY>LONGNV</CREATED_BY>
<CREATED_BY_NAME>LONGNV</CREATED_BY_NAME>
<CREATED_ON>2007-09-13</CREATED_ON>
<PRO_CATEGORY>1</PRO_CATEGORY>
<TEMPLATE_ID>TEMP3</TEMPLATE_ID>
<LAST_CHANGE_DATE>2007-09-13</LAST_CHANGE_DATE>
<LAST_CHANGE_TIME>13:42:55</LAST_CHANGE_TIME>
<LAST_CHANGED_BY>LONGNV</LAST_CHANGED_BY>
<LAST_CHANGED_BY_NAME>LONGNV</LAST_CHANGED_BY_NAME>
<PRO_TYPE_TEXT>Development Project</PRO_TYPE_TEXT>
<CAUSE_TEXT>Specify reason</CAUSE_TEXT>
<ISTAT>I1700</ISTAT>
<TXT30>Created</TXT30>
<STATUS_TEXT>Created</STATUS_TEXT>
<GUID>DC61A9C97A4CB9F1BD5D001A927DA25C</GUID>
<ACT_WRK_UNIT_EXT_MSEHT>h</ACT_WRK_UNIT_EXT_MSEHT>
<ACT_WRK_UNIT_EXT_MSEHL>Hour</ACT_WRK_UNIT_EXT_MSEHL>
<SEVERITY_TEXT>No Value Set</SEVERITY_TEXT>
<LONGTEXT />
</ProjectData>
<ProjectRoles />
<Resources />
<Tasks />
<Checklists />
- <Phases>
- <Phase>
- <PhaseData>
<NUMBER>200000000000000000072007</NUMBER>
<DURATION>8</DURATION>
<DESCRIPTION>Phase 1</DESCRIPTION>
<CONSTRAINT_TYPE>2</CONSTRAINT_TYPE>
<START_DATE_FIX>2007-09-13</START_DATE_FIX>
<CONSTR_TYPE_FIN>3</CONSTR_TYPE_FIN>
<FINISH_DATE_FIX>2007-09-20</FINISH_DATE_FIX>
<SCHEDULED_START>2007-09-13</SCHEDULED_START>
<SCHEDULED_FINISH>2007-09-20</SCHEDULED_FINISH>
<CREATED_BY>LONGNV</CREATED_BY>
<CREATED_BY_NAME>LONGNV</CREATED_BY_NAME>
<CREATED_ON>2007-09-13</CREATED_ON>
<CHANGED_BY>LONGNV</CHANGED_BY>
<CHANGED_BY_NAME>LONGNV</CHANGED_BY_NAME>
<CHANGED_ON>2007-09-13</CHANGED_ON>
<SCHEDULED_START_LATE>2007-09-13</SCHEDULED_START_LATE>
<SCHEDULED_FINISH_LATE>2007-09-20</SCHEDULED_FINISH_LATE>
<DURATION_UNIT>TAG</DURATION_UNIT>
<GUID>DC61A9C97A4CBBF1BD5D001A927DA25C</GUID>
<ISTAT>I1700</ISTAT>
<TXT30>Created</TXT30>
<STATUS_TEXT>Created</STATUS_TEXT>
<PHA_TYPE_TEXT>Enter a phase type</PHA_TYPE_TEXT>
<SEVERITY_TEXT>No Value Set</SEVERITY_TEXT>
<DURATION_UNIT_TEXT>Days</DURATION_UNIT_TEXT>
</PhaseData>
- <Tasks>
- <Task>
- <TaskData>
<NUMBER>00010</NUMBER>
<EXTERNAL_ID>210000000000000000182007</EXTERNAL_ID>
<CONSTRAINT_TYPE>2</CONSTRAINT_TYPE>
<START_DATE_FIX>2007-09-14</START_DATE_FIX>
<DURATION>7</DURATION>
<CONSTR_TYPE_FIN>3</CONSTR_TYPE_FIN>
<FINISH_DATE_FIX>2007-09-20</FINISH_DATE_FIX>
<WORK_UNIT>H</WORK_UNIT>
<DESCRIPTION>task 1</DESCRIPTION>
<ACT_WRK_UNIT_EXT>H</ACT_WRK_UNIT_EXT>
<REM_WRK_UNIT_EXT>H</REM_WRK_UNIT_EXT>
<PRIORITY>001</PRIORITY>
<SCHEDULED_START>2007-09-14</SCHEDULED_START>
<SCHEDULED_FINISH>2007-09-20</SCHEDULED_FINISH>
<CREATED_BY>LONGNV</CREATED_BY>
<CREATED_BY_NAME>LONGNV</CREATED_BY_NAME>
<CREATED_ON>2007-09-13</CREATED_ON>
<CHANGED_BY>LONGNV</CHANGED_BY>
<CHANGED_BY_NAME>LONGNV</CHANGED_BY_NAME>
<CHANGED_ON>2007-09-13</CHANGED_ON>
<SCHEDULED_START_LATE>2007-09-14</SCHEDULED_START_LATE>
<SCHEDULED_FINISH_LATE>2007-09-20</SCHEDULED_FINISH_LATE>
<DURATION_UNIT>TAG</DURATION_UNIT>
<GUID>DC61A9C97A4CBDF1BD5D001A927DA25C</GUID>
<ISTAT>I1700</ISTAT>
<TXT30>Created</TXT30>
<STATUS_TEXT>Created</STATUS_TEXT>
<TSK_TYPE_TEXT>Enter project type</TSK_TYPE_TEXT>
<PROCESS_TEXT>Specify Reason</PROCESS_TEXT>
<WORK_UNIT_MSEHT>h</WORK_UNIT_MSEHT>
<WORK_UNIT_MSEHL>Hour</WORK_UNIT_MSEHL>
<ACT_WRK_UNIT_EXT_MSEHT>h</ACT_WRK_UNIT_EXT_MSEHT>
<ACT_WRK_UNIT_EXT_MSEHL>Hour</ACT_WRK_UNIT_EXT_MSEHL>
<REM_WRK_UNIT_EXT_MSEHT>h</REM_WRK_UNIT_EXT_MSEHT>
<REM_WRK_UNIT_EXT_MSEHL>Hour</REM_WRK_UNIT_EXT_MSEHL>
<SEVERITY_TEXT>No Value Set</SEVERITY_TEXT>
<DURATION_UNIT_TEXT>Days</DURATION_UNIT_TEXT>
<TASK_ID>00000000000000000019</TASK_ID>
</TaskData>
<ProjectRoleAssignments />
<Relationships />
</Task>
</Tasks>
<Checklists />
</Phase>
</Phases>
</Project>
</cPr:cProjects>
I got the below error page when I export to MS project
Error when processing your request
What has happened?
The URL http://sap0806.cybersoft.vn:8000/sap/bc/webdynpro/sap/cprojects/ was not called due to an error.
Note
The following error text was processed in the system BP1 : Enter a valid start and end date
The error occurred on the application server SAP0806_BP1_00 and in the work process 0 .
The termination type was: ERROR_MESSAGE_STATE
The ABAP call stack was:
Function: DURATION_DETERMINE of program SAPLSCA4
Method: FILL_MSP_TASKS of program CL_DPR_MSP_UTILITY============CP
Method: FILL_MSP_PROJECT of program CL_DPR_MSP_UTILITY============CP
Method: CONVERT_DPR2ABAP of program CL_DPR_MSP_UTILITY============CP
Method: MSPC_GENERATE_XML of program CL_DPR_MSP_UTILITY============CP
Method: PROVIDE_MSPC_DATA of program CL_DPR_MSP_UTILITY============CP
Method: GET_MSC_XML2 of program CL_DPR_UI_LOG_TRANSFER========CP
Method: EX_NEXT_FORMAT2 of program /1BCWDY/1MYG96LSBGWA42FNEL10==CP
Method: IF_COMPONENTCONTROLLER~EX_NEXT_FORMAT2 of program /1BCWDY/1MYG96LSBGWA42FNEL10==CP
Method: ONACTIONEX_FORMAT2_NEXT of program /1BCWDY/1MYG96LSBGWA42FNEL10==CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system BP1 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server SAP0806_BP1_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server SAP0806_BP1_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 600 -u: LONGNV -l: E -s: BP1 -i: SAP0806_BP1_00 -w: 0 -d: 20070913 -t: 112719 -v: ERROR_MESSAGE_STATE -e: Enter a valid start and end date
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
PS: I've never exported successfully any project to MS Project.
Please help me
Thanks
Long

Hi long nguyen,
Have you configure the backend system
1)c -project -- collorabration -->connection to external system --> Microsoft project integration --> ( assing field to import/export to c project)
2)c-project integration with MS client or MS server . from which method your trying
thanks
sunil jawalkar

Similar Messages

What does this mean and how do I fix it: "The following warnings and errors were found during the validation of the current project: - There appears to be a broken asset in your project. Correct this problem before burning this project."

What does this mean and how do I fix it: "The following warnings and errors were found during the validation of the current project: - There appears to be a broken asset in your project. Correct this problem before burning this project."

It means that iDVD has found a problem with one of the movies added to the project. Did you edit the movie after it had been added to the project.
Create a new project and add your assets, movies, slides, etc. again and follow this workflow to help ensure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

"Program files" directory problem during Microsoft Office Customization Installer in non-English versions of Windows

We have a document-level customization solution for Word and are experiencing problems during deployment in an environment running on terminal services. The OS (Windows 2012) is English and Word (2013) is non-English (German).
Installation is done into the "Program Files" folder correctly. But when trying to start a word document linked to the specific template. The "Microsoft Office Customization Installer" pops up with the error.
"There was an error during installation"
From: file:///C:/Programme/[CompanyName]/[Productname]/[Productname].vsto
Downloading file:///c:/Programme/[CompanyName]/[Productname]/[Productname].vsto did not succeed.
Exception: ....
System.Deployment.Application.DeploymentDonwloadException: Download file:///C:/Programme/[Companyname]/Productname]/[Productname].vsto did not suceed. ---> System.Net.WebException: Could not find a part of the path 'C:\Programme\[Companyname]\[Productname]\[Productname].vsto'.
---> System.Net.WebException: ...... ---> System.IO.DirectoyNotFoundException......
The problem seems to be that the installer is looking for C:\PROGRAMME instead of C:\PROGRAM FILES. C:\PROGAMME is the German localized name of PROGRAM FILES (http://en.wikipedia.org/wiki/Program_Files).
The installer installs the solution correctly deployed into c:\program files, but when the later a user tries to start it and the Microsoft Office Customization Installer is called, it tries to access the non-existing "c:\programme" folder. This
doesn't exist, because Windows is English.
Is there any thing related to deploying solutions on a platform which has different languages (mixing/matching of OS language and Office language?)
Thank you for your help

Hello,
1. First, I would confirm with you whether you dealt with the localization for your document-level add-in?
2. Did you use this way to define the Create a class that defines the post-deployment action part of Put the document of a solution
onto the end user's computer (document-level customizations only) and did you get the path with Environment.SpecialFolder enum?
To handle this, I would recommend you consider using Environment.SpecialFolder to set that property.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Problem during recording of CJ01 transaction for BDC

Hello All,
I am facing a problem during the recording of CJ01(Creation of projects) for creation of BDC program.
The problem is during recoding after entering the the first WBS element with level 1 and i press the '+' button to create one more WBS element with Level 2,the first WBS element with level 1 goes to the bottom of the line item table and now if try to create the WBS element with Level 2 in the first line it wont allow because of the fact that the first WBS element with level 1 is below it.
But if i enter the first WBS elemnt with level 1 in the first line and come to the next line and enter the second WBS element with level 2 it will create since Level 2 WBS is below the Level 1.But this approach cannot be used for doing a recording for BDC.
Can anyone help in this regard
Thanks in Advance
Ashish

Hi Ashish,
NW is right. It is not proper to use BDC for CJ01. You can get more control and better if you use the following function module,
1. Use BAPI_PROJECT_MAINTAIN to create project definition and WBS Structure in one go. see the documentation in the BAPI on how to use this. Post the resut in this forum if you face any problem
Ravi

Another headache - "problem during multiplexing/burning - buffer underun"

Hello,
After many iDVD issues, I finally got the burning process of my DVD project.. half way through it spit my DVD out and gave me these errors:
"Errors were found during the burning process:
The recording device reported the illegal request: Buffer underrun. (0x21, 0x02.)
There was a problem during multiplexing/burning."
What is this supposed to mean and how can I just burn my DVD?!
Thank you
Chris

It's been awhile since I had this error crop up, but I know 2 things that caused it for me.
1) Bad DVD media. It happened a lot when I was using some cheap, off brand DVD-R's. More expensive Sony DVD's (white) are much better and more consistent. The time wasted with bad burns from bad DVD media is not worth the time.
2) It could even be a problem with your DVD burner going bad, but not as likely. I did have one SuperDrive replaced because I started having problems even with good, recommended brands of DVD media. However, try getting some better media first. Don't buy a lot. Try out a small package of DVD-R's or buy a disc from a friend to try out a brand.
Another possibility: Lack of sufficient, free hard drive space. Here's what iDVD 6's help file states:
"When you burn a DVD, iDVD needs temporary space on your hard disk to store the encoded files for your project. To burn your iDVD project to a single-layer DVD disc, you should have 8-10 gigabytes (GB) of free disk space on your hard disk, depending on the size of your project. For double-layer discs, you need 15-20 GB of free disk space."
Apple's support forum describes "buffer underrun" in more detail at:
http://docs.info.apple.com/article.html?artnum=25750
You might also want to defragment your hard drive (with a 3rd party utiility such as TechTool Pro) so that you don't have a fragmented hard drive when burning a project.
Speed rating of the DVD media- I've seen reports that some SuperDrives work best with media rated the same as it's maximum burn speed (e.g.- 4x, 8x, etc). I would recommend trying to find media that matches your SuperDrive burn speed, or no more than twice the burn speed.
I hope this helps.
You didn't mention which version of iDVD you were using or which operating system. Sometimes other users have tips for you based on that info.

Problem during PR cycle

Guru's
Apologies if this is the wrong place to post.
My user is facing a problem during creation/release of PR. He does the valuation of required quantities by rupees 1/- and once he moves to save it , the system gives error budget exceeded and when we go through the process we see that the system is valuating the required quantity by rupees 222/- automatically.
there is enough available budget already in the WBS/Project.
please suggest where is the problem...
Regards,
Saurabh
Edited by: ankur_sau on Jan 21, 2012 7:39 AM

Dear Abdul,
The Budget is distributable as well as released.
Regards,
saurabh
Edited by: ankur_sau on Jan 23, 2012 5:05 AM

Cproject problems with accounting settings

Hi all,
*I am not sure if someone can help me.*
*I am using cProjects suite 4.5, when I create a project ( in cproject) error message 'The settings for accounting integration contain errors' Message no. DPR_FIN_GECCO004 appears and the accounting tab is empty.*
*I am not sure where can be the problem, I have reviewed cproject configuration and I think it is correct.*
*Does anyone have a configuration guide? or at least may someone tell me what he has configued at this point IMG --> collaboration project -->Conection to external system -->Object link in sap system --> Make settings for calling a sap transaction -->Alias for the web server of a SAP transaction ?*
*Thank you very much for your help.*

Hi,
1.First define the cost/revenue rates used in costing.
2. Second imp activity is replicate cost revenue rates to R/3 system. if you using same system give RFC destination NONE. otherwise use your target system available to you. take help of basis if u dont know traget system. Activity given below when u replication cost revenue rates.
Activities
Enter the replication line and specify which rates you want to replicate under Selections.
If you do not specify a selection, all rates are replicated.
If you want to replicate the records only partially, and you do not want to post them in the target system, set the Test Run indicator.
After test run sucessful, plz uncheck that test rum box and replicate.
Thanks
Amit
note: award points for useful answer

Multicam Editing Problem during Export Pr CC

Hey guys, first post.
i have been working on a pretty long multicam project (About 1h45m) in Premiere Pro CC
I was all done, and during export in Media Encoder i noticed that after about 45m of rendering, the preview window was still showing the beginning of the video. Upon further inspection, i noticed that the video appeared to be Looping. Sencing that something was wrong, i cancelled my render and reopened my project.
when the project reopened i could see that after a couple of edits, there were little white triangles and the top of the clips. I need to stress that before i started rendering, these triangles where not there.
And yes, when i played through my sequence, at every edit (camera change) the multicam clip would play from the beginning again. i have tried to remove everything after where this problem occurs and then drag the footage out. It does allow me to do edits again and it works fine, but i dont really want to spend hours doing it again, not understanding what the problem is and run the risk of it messing up again.
I am so very confused as to what is going on so any help at all would be awesome. Its very frustrating to work on something for so long and it fail during export.
I will attach an image showing a glimpse of what my problem is. (Please excuse the camera work)
Thanks again
Dan
Specs.
2012 iMac
Processor 3.1 GHz Intel Core i7
Memory 8 GB 1600 MHz DDR3
Graphics NVIDIA GeForce GT 650M 512 MB
Software OS X 10.9.1 (13B42)

The triangles indicate hard media boundaries -- there are no more frames available from the source clip beyond that frame. If you don't have a triangle on a clip at an edit point, then the source media has frames available beyond the in or out point of that clip instance on the timeline.
There are a few things that might cause what you're seeing, so I recommend you check your multicam source sequence to make sure that it's referencing the correct media, and that all the media in your project points to the correct files on disk. Double- and triple-check that all the clip instances in the timeline point to the correct sequence or media. If the problem is related to clips on the timeline not pointing to the right thing, you could save yourself some work by trying to fix that instead of re-creating your edits. You should also see if you have any Auto-Saved projects that don't have the triangles at the edit points and that play the edited sequence correctly -- you could save yourself even more work.
Cheers,
Jeff

Problems during startup NWDS

Hello Experts,
Need your help: I got an error "Problems during startup, Check the ".log"....." when starting NWDS. I checked .log, here is the errors:
org.eclipse.core.internal.boot.DelegatingLoaderException: org.eclipse.core.runtime.CoreException: Problems encountered starting up plug-in: "org.eclipse.core.resources".
at org.eclipse.core.internal.plugins.PluginDescriptor.internalDoPluginActivation(PluginDescriptor.java:754)
at org.eclipse.core.internal.plugins.PluginDescriptor.doPluginActivation(PluginDescriptor.java:188)
at org.eclipse.core.internal.plugins.PluginClassLoader.activatePlugin(PluginClassLoader.java:112)
Any suggestions/advises?
Thanks, Jin

Hi,
Take the backup of .metadata folder, then delete that from your workspace.
If you delete the .metadata file - It will no do any harm to your existing projects in your workspace.
But you need to import them into the NWDS again.
If there is any issue you delete the new .metadata and place the old backup .metadata.
There are no issues. I did that just now
Or
Instead of deleting the .metadata you can try giving the new workspace in -data of NWDS.
And in new workspace copy your old projects (from old workspace) and import them again into NWDS.
How to give -data
Right click on NWDS shortcut on desktop and in shortcut tab
in target input:
For example already you have like this
D:\IDE70\eclipse\SapIde.exe -vm "C:\Program Files\Java\jdk1.5.0_04\bin\javaw.exe"
then at the end add
-data "C:\NewWorkspace"
Regards,
Charan

Problems during implementation........

Can anyone please send me some problems faced during implementation at the five stages interacting with the client?Please send me to my mail [email protected]

The major problem during implementation is gaps in AS-IS Study. If we do not study the peocess to the minute bit, then we tend to miss out critical requirement & this is realized during testing. Then the redo takes a longer time, compared to doing it correct initially. Ofcourse, Things will not be correct in first attempt, but if the number of things to redo is leasser, it becomes more convienent, as during testing phase, we are already overloaded with many activities to be taken care of.
We should be very clear what is not possible in SAP or even if possible with development, but the particular development is not in scope of project, we require to say a clear NO to it.
It is difficult to pin point the problems. If I share one of my experience, one of my project was fot service industry & the basic scenarios were periodic billing, mile stone billing & resource related billing & all three I had no prior experience. I had clue of Milestone & Periodic, but no clue of resouce related billing. I had to stuggle hard to get the scenario configured & configuring to the requirement of client. But finally I could do it successfully.
Regards,
Rajesh Banka
Reward suitable points.

Muxing Preparation problem during encoding

during the iDVD encoding process, I get an message of "muxing preparation error'. I am burning from an FCP 6 project. I've tried to burn the project on different computers and with different iDVD themes, with audio and without. I've even re-built the Quicktime movie from FCP several times with different codecs. It's been tried on an Intel Mac and a Motorola Mac. Same muxing problem each time. Help!

The problem was discovered! I'm a TV Production instructor and the project was a student's. The student had made an error in his FCP project by putting a piece of video and audio about 12 minutes past the actual end. When iDVD's encoding process encountered this, it didn't know what to do with 12 minutes of "video nothing". So it gave the muxing prep error. I had him delete the unneeded video and iDVD is burning it now without a problem. He now knows to end projects when they actually end! Thanks for the help.

Problem During Installation of ECC 6 on Windows 2003

Here I am facing problem during Import ABAP Phase.
It is throwing Error like that::
CJS-30022 Program 'Migration Moitor' exists with return code 103.
After completeing 9 stages, it's getting problem in Import packages and installation get stucked.
My Server is like that:
OS: Windows Server 2003
Hardware: HP Itanium IA64
Database: Oracle 10.2g
SAP Release : 2004s ECC 6
I have configured Java with j2sdk 1.4.2_12:
JRE 1.5 is not available for IA64 .
I reconfigured the parameter "shared_pool_size" (to 400MB)in init<sid>.ora at \oracle\<sid>\database.
Also adjusted another parameter which is "shared_pool_reserved_size" i.e. 10% of the shared_pool_size.
What to do now.
Please send me feed backs.
Regards,
Sumanta Chatterjee
 

run 'ls -lrta' in /tmp/sapinst_instdir/.... (whatever the lowest path is there, where all the log files are). You should see something like sap<something>.tsk and sap<something>.log. Look at the most recently updated sap<something>.log file for the specific error. One problem I've seen is that if you configure the advanced oracle config to turn off AUTOEXTEND on the tablespaces, the abap load will bomb because it runs out of space. Also, make sure your SYSTEM tablespace has at least 500M.
Posting the relevant contents of the log with the detailed error description would help us provide a better answer as well.
Rich

How do I get facetime on a MacBook Pro to work? I keep getting a " server encountered problem during registration.." message. I have FaceTime ver. 1.1.1

How do I get facetime on a MacBook Pro to work? I keep getting a " server encountered problem during registration.." message. I have FaceTime ver. 1.1.1
Thanks

Icapper wrote:
I will end up getting something other than Logitech speakers, since I'm just weird like that.
Your not weird, your a audiophile.
https://en.wikipedia.org/wiki/Audiophile
Good sound costs money. And with a 5.1 system your usually doing surround sound decoding for BlueRay movies etc. for home theater purposes.
The PC 5.1 surround sound systems require a audio card in a PC tower and mainly used for playing 3D games so that won't work for any Mac at all. So don't buy a PC 5.1 surround sound system for your Mac.
Harmon Kardon has the GoPlay, it's a portable stereo with awesome sound (not as good as their theater systems) and you can hook up a analog male/male stereo mini cable to it from the Mac.
$200 and it has a iPod dock and also takes like 8 batteries so it's portable.
http://www.amazon.com/dp/B002GHBTNC
There is also the Bose Wave clock/radio, you will need a stereo mini to RCA break out cable for that.
http://www.bose.com/controller?url=/shop_online/wave_systems/index.jsp
The GoPlay has much better sound than the Bose, I think the Bose are overpriced.

Problem during creation of shipment document and shipment cost document

Hi
My client facing problem during creation of shipment document and shipment cost document at the time of Batch Job
Delivery no 897654: goods issue on 30.11 at 13:22. Shipment on 30.11 (VT01N).
Shipment costs on 1.12 (VI01).
the problem is the shipment document get created on 30.11.2010 but the shipment cost document get created on 1.12.2010
pleas advice.

Hi,
Please check the batch job processing log.
As per my understanding, business requires to generate the Shipment & Shipment cost documents immediatley.
However there is some time between the documents creation time. I dont see any issue in the data or problem in the delivery docs Because system will not generate the shipment docs after 1 or 2 days if there is an issue with the data . There must be problem in the Batch Job.
Analyse the batch jobs and timing of the job process.
Let us know your feedback...
Best Regards,
MKumar

Problem during installation of Solution Manager

Hi All,
I am facing problem during the installation of solution manager. it shows following error during installation
ERROR 2010-05-21 14:39:24
FJS-00003 TypeError: this._name has no properties (in script NW_Doublestack_SCS|ind|ind|ind|ind, line 5140: ???)
ERROR 2010-05-21 14:39:25
FCO-00011 The step collect with step key |NW_Doublestack_SCS|ind|ind|ind|ind|0|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .
Please also let me konw how much space do we require for installating the Solution manager as a central system on one drive?

Hi Chandan,
Well may be below SDN thread will help you... out ! try out with Curd Abstoss Response !!
Inst. SAP NW 2004s Java SP9 - Error FJS-00003 this._name has no properties
Hope it will work for you..as well !

Cproject - Problem during exprort a project to ms project

Similar Messages

Maybe you are looking for