CProjects - Project Systems Linking and other features

Dear All,
              I need inputs on how to integrate cProjects with Project Systems. Also i need information on the what are all the information we can integrate between these two.
              One more important thing is i am seeing the Services, Details Data and Controlling links in My cProjects system. Where as i found Account Assignment, Costing links in one screenshot of Documents. And both are for cProjects 4.0. Why this difference is showing up
              And one generic question is, what is the requirement for these kind of scenarios. And pros and Cons of both the systems.
regards,
rajesh.
Edited by: Guest on Feb 14, 2008 5:59 PM

Hi Srini,
Thanks very much for the links. However, I've already gone through the standard documentation in SAP and they are a bit too high level/vague for me. I have considerable experience in xRPM, cProjects Suite and have good grasp of project management concepts, tool and techniques. My knowledge of PS is somewhat limited though.
What I am specifically looking for is what type integration options and scenarios are available. For example, cProjects can have phases and tasks defined. How would these integrate with for example WBS elements and networks in PS? What are the things you would do in cProjects and not PS and vice versa? Hope my question is clearer now.
Appreciate any further information you may have on the above.
Thanks,
Lashan

Similar Messages

CProject / Project System / Project Solution Manager

Hi Everyone,
I am very much new to SAP and doing my first semester in Masters of ERP (SAP). I am very much interested in project systems basically Implementation, Reporting, Time Management, Analysis etc I wondering if any one can help me how to and where to start its quite confusing when these forums talk about cProject, Project Solution Manager and Project Systems please give some info like books, links or documents where i can develop my skills especially practical examples. I really appreciate al of you guys time and patience.
Thanks
Durga

No worries, found it.
Thanks anyways,
Regards
MK

Project Site Quick Links has 2 Project Details Links and no Recent Links

Hi,
Project Sites when created has 2 Project Details Links and the Recent Links with the it's sublinks does not appear. I have this problem on two PWA Instances and not on a 3rd. Project Server 2013 with SP1 installed. Does
anyone know what cause this?
Of the 3 PWA instances the 2 that it occurs on are on different SP farms. I have created a Mastersite template saved as a solution and added to the EPT. The Master site has the correct links before I save it as a template
Andrew
Andrew Payze

Hi Andrew,
How did you create the site that you used as the template? Did it start out as a site already attached to a project? If so you should create a blank project site not attached to a project / create during the project create process. Part of the project create
/ site creation process adds properties associated to that project in the site's property bag etc. you don't want these properties causing issues for other project sites. See the steps below on creating an example custom project site template:
http://pwmather.wordpress.com/2014/02/02/getting-started-with-projectonline-part-6-ps2013-office365-project-ppm-sharepointonline-pm-sp2013/
The first part of that post covers project plan templates but the project site templates start from the section beginning with "The site template is a bit more involved than the project plan template"
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Project System SAP and MS Project

Hi,
Someone know a software for integration between Project System SAP, and MS project, in addition to the "OpenPS".
Best Regards,
Helena Granja

Hi
Please check this
http://www.pipelinesoftware.com/psi/news.jsp?page=20080105
And from Impress
http://www.impress.com/stuff/contentmgr/files/7e364d6f079722b5d13bb004e69649c2/misc/impress_for_epm_web_1007.pdf
Regards

Firefox doesn'tshow navigation buttons and other features.

Buttons to move forward the email, and other features are absent from the screen and there are blanks where features should be.

Doing a downgrade is not anything I have done or feel comfortable with. Is there a clean procedure to accomplish this?

I have CS5 design premium student and teacher edition, have never been able to receive any updates. And cannot find cetain features like Content Aware, Adobe Watermarks etc...Is there any way I can add these and other features

I have never been able to receive any updates. And cannot find cetain features like Content Aware, Adobe Watermarks etc...Is there any way I can add these and other features unavailable to me? Or do I have to upgrade the version I have? If so, how much would that be?

The only "content aware" feature in CS5 is the fill, so you are not missing anything with the updates because nothing more is there. And I honestly don't know what you mean by "Adobe watermarks" there is no such thing, but there is a series of scripts for such stuff.
Mylenium

XRPM, cProjects and Project Systems link in BI

Hi Guys,
We are implementing a RPM solution in our BI 7.0 system. We have a requirement where we need to link RPM data with cProjects(Project, Task) and Projects Systems (Status, WBS Elements, so on) data.
Could some one give me the links/documents related to linking the above objects.
Thanks in advance
Srinivas.

Hi Neelam:
Check Project system tables like PROJ etc and create a View for the fields you want.
Use this View as your datasource to extract data.
Thanks,
Jagadish B V

Linking of cproject & project system

hi guru
Can somebody please let me know the the Configuration steps & the entire process of linking Projects created in Project Systems & cProjects? How can we view the Projects in cProjects which we create in PS and vice versa? Waiting for your reply at earliest.

Hi
See this help data
http://help.sap.com/saphelp_cpro31/helpdata/en/c5/923e4045796913e10000000a1550b0/frameset.htm

General Info on integration between Project Systems (PS) and cProjects

Hi,
I would like some general info on the integration scenarios between PS and cProjects. Links to any documentation/blogs on this would also be very helpful.
Thanks,
Lashan

Hi Srini,
Thanks very much for the links. However, I've already gone through the standard documentation in SAP and they are a bit too high level/vague for me. I have considerable experience in xRPM, cProjects Suite and have good grasp of project management concepts, tool and techniques. My knowledge of PS is somewhat limited though.
What I am specifically looking for is what type integration options and scenarios are available. For example, cProjects can have phases and tasks defined. How would these integrate with for example WBS elements and networks in PS? What are the things you would do in cProjects and not PS and vice versa? Hope my question is clearer now.
Appreciate any further information you may have on the above.
Thanks,
Lashan

CProjects & Project System

Hello Friends,
I want to use the projects that created in Projects Systems(PS) in cProjects and also the vice-versa.
Could you tell me the procedure to do this?
Thanks & Regards,
Senthil.

For creating project from PS to cproject use the following method
What you can do is Create a cProjects Project usinga Badi in PS on save.
where you can use FM BAPI_BUS2172_CREATE to create Project.
Also when you make changes to PS project use Badi on save to transfer the changes to cProjects projects.
You can use Function modules like:
BAPI_BUS2172_CHANGE
BAPI_BUS2173_CHANGE
BAPI_BUS2174_CHANGE
BAPI_BUS2175_CHANGE
and so on
vetrivelan.

SCCM 2012 - Question before deployment (WSUS/SCUP and other feature).

Hello,
Sorry for the question but I'm a newbie about Microsoft SCCM architecture...
I have to deploy a new WSUS (4.0) server for my new servers (Windows 2012) and I ask myself how I can install him correctly with idea of a futur SSCM system.
About WSUS, this server is only for the new servers (Windows 2012) which can not receive update by our current WSUS server (Windows 2003 WSUS 3.0 SP1). I think I need also upgrade my AD schema to the 2012 level before ?
And from what I understood of SSCM especially for software management (deploy and updates), there is a specific role "Software Update Point" which uses WSUS for Microsoft Product and SCUP for the third party tools.
I am wondering which server configuration is the best for my future SSCM architecture.
Firstly, can I setup my WSUS to a new server and add the role "SSCM - Software Update Point" on the same server later ? If it's possible, what type of server is recommended ?
Just for the WSUS feature I had expected a VM with a dual core CPU, 4GB RAM, 40GB for the system and 100GB only for the update data (a total of 250 servers and clients which can use 2003,2008,2012,XP,7,Office2010,Exchange 2010).
Regarding SSCM in general, Is it recommended to have multiple server for SSCM for a total of 100 servers and 150 clients ? If yes can we separate them by role ?
I think I will have another questions later but it's a good start.
Thanks in advance for your good advice !
Have a nice day,
Clement

Hi,
Thanks for your advice, I have many questions because I did not want setup an SSCM now but it seems it's the better solution (my first need is to deploy MS update on my new servers).
If I install my WSUS service on my server I could not reuse it directly for my SSCM (because I must start with a fresh installation of WSUS?).
Regarding the hardware, I thinks that minimum requirements isn't a good idee (see bellow).
http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_MinHWReqs that
Hardware component
Requirement
Processor
Minimum: AMD Opteron, AMD Athlon 64, Intel Xeon with Intel EM64T support, Intel Pentium IV with EM64T support
Minimum: 1.4 GHz
RAM
Minimum: 2 GB
Free disk space
Available: 10 GB
Total: 50 GB
Do you believe that an dual core with 4GB is correct ?
And for the disk at least 100GB just for the WSUS and 200GB for the storage of system image and package deployment (third party tools) ?
Edit : value is totaly different here :
http://technet.microsoft.com/en-us/library/hh846235
Stand-alone primary site
Up to 100,000 clients
SQL Server is installed on the site server computer
8 cores (Intel Xeon E5504 or comparable CPU)
32 GB of RAM
550 GB hard disk space for the operating system, SQL Server, and all database files
I thinks if we deploy an SSCM, we will use it for the deployment of system (clients), applications (Office, third party tools), updates (MS and third party tools) but also for the managing of our infrastructure (SSCM seems very powerfull).
Regards,
Clément

Missing system prefrences and other apps!! What do i do!?

My I book G4 with tiger has been having some issues. First my (system preferences, mail, automator ect.) applications are missing. I have a external hard drive but i do not know how to go about backing it up. My computer is also experiencing long startup times (2+ min.) and trouble connecting to wi-fi. Please help me.

If the computer shipped with the Tiger 10.4.x system on DVD media, then you
have most if not all the stuff to get going on that install disc#1. You can start
the computer from the install disc 1 by inserting that disc into the optical drive
and restarting with the C key held down. This gets you into the Installer; but
within the first page with a full window and the Installer menu-bar, you have
options and access to tools, such as Disk Utility. And options in Disk Utility.
Depending on what kind of external drive unit you have, it could be used as a
backup. Some kinds of backups are best done to a FireWire enclosed HDD
with a bootable chipset for making bootable clones of OS X using a clone utility
such as Carbon Copy Cloner or Super Duper; both are download utilities and
they can be utilized directly once the instructions from their home pages are clear.
A clone should not be performed to a USB2.0 drive if expected to be bootable in
the older PPC Macs; though some users had some successes in some instances
the FireWire drive appeared the best overall setup to be invested in for those.
You could use Pacifist utility (will run in Demo mode) to extricate correct packages
from the Installer, to attempt to repair by reinstalling, just the parts that are missing.
Pacifist can install parts of the system as it pulls them from a source and makes an
installer on the desktop. This can be tricky, since it may not work the first time. And
some aspects of the instructions can be unclear, making the result non-functional.
An 'Archive & Install' - then update the resulting new system folder using the Combo
and last security updates, all Java updates, quicktime, shockwave & flash player,
new browsers, and other parts, could be the best way to go. If the hard disk drive is
not failing, a full new installation on a zero-overwritten and reformatted hard disk drive
would be a way to assure yourself the old content would be wiped out totally; so some
kind of backup of even a defective drive's contents would be a good idea.
• Mac OS X: About the Archive and Install feature
Dec 2, 2008 ... This document discusses the Archive and Install feature of the Mac OS X
Installer. To learn more about this feature in Mac OS X 10.4 or ...
http://support.apple.com/kb/HT1710
• General advice on performing an Archive and Install
The Archive and Install installation option is used to replace the System-level comp-
onents ... This is generally: 5 GB for Mac OS X 10.4 Tiger® and earlier; ...
http://www.thexlab.com/faqs/archiveinstall.html
• Mac OS X 10.4, 10.5: About installation options
Oct 17, 2008... Instead, you might benefit more from doing an Archive and Install
installation (see "Archive and Install," below)....
http://support.apple.com/kb/HT1545
• Pacifist: http://www.charlessoft.com/
• Carbon Copy Cloner: http://www.bombich.com/software/ccc.html
With a mangled System and missing parts, some aspects of making an archive may be
difficult. And your Disk Utility in the computer's system normally is within the Applications
folder, in a Utilities folder. If Apps is gone, so is the Disk Utility. There is one on the boot
install disc; so you can prepare an appropriate external hard disk drive with that, for use
as a backup or clone host, if it is suitable.
You have a few options. I'm still trying to figure out how the System Preferences and
Applications folders could be missing or trashed from a user's computer. Unless a
helper who had access to the computer while the admin-owner was away, had fun
and opened folders, files, drives; and played drag-drop, trash, etc.
Had you tried a search for System Preferences to see if that item was moved into
some other incorrect location or the Apps moved into another folder?
Sound like fun...
Good luck & happy computing!
{edited to wonder why}

Power Manager and LCD Brightness, System Freezes, and other Problems

I have a brand new X200 with PM 1.54. At first everything was working great. Over the past few days I've noticed a few things:
1. When running on battaries, the screen brightness changes about every 10 seconds even though the profile I'm using has that feature turned off.
2. After running the computer for about 1/2 hr, suddenly the PM shows a dramatic reduction in amount of time left on my battery which coinsides with:
a) fan consantly running; AND
b) about 10 minuntes later my entire system freezes and I have to push the power button to force a reboot.
Any ideas what's wrong?

Since your Mac Pro is new, you would do well to contact Apple about this problem while the warranty is still in effect.

FIX ADOBE SEND NOTIFICATIONS AND OTHER FEATURES

I would love for us to select which notifications do we want when we use the adobe send product. In the previous version (sendnow) we used to receive notifications when the file was actually sent out, and downloaded. In this version we only receive when the file is downloaded which is terrible. Moreover, it would be great to have a CC option in an email too. Lastly, I cannot view my history of files that I have sent but instead I just see a history of files available but no record on what that file is associated with, etc.. TERRIBLE. Please fix these things in the future release.

Hi Donegergroup,
Please see my response in your other post on this topic: FIX ADOBE SEND NOTIFICATIONS & Other features
Best,
Sara

Suddenly in the middle of editing a large project the cropping and other tools stopped working. Did i hit some key or something accidently?

suddenly in the middle of editing a large project in Aperture the cropping and others tools stopped working. Did I accidently hit something to do that?

Maybe you hit the "p" key?
Then "Quick Preview" will be turned on and prevent editing. Hit "p" again or use the "View" ->"Quick Preview" menu entry.

CProjects - Project Systems Linking and other features

Similar Messages

Maybe you are looking for