CPUJul2009 on 11.1.0.7 on RH5 64bit

Has anyone applied CPUJul2009 on 11.1.0.7 on RH5 64bit? It sent me to java hell:
Applying patch 8563945...
ApplySession applying interim patch '8563945' to OH '/home/oracle/orasw/app/oracle/product/11.1.0'
Backing up files affected by the patch '8563945' for rollback. This might take a while...
Patching component oracle.rdbms, 11.1.0.7.0...
Updating archive file "/home/oracle/orasw/app/oracle/product/11.1.0/lib/libserver11.a" with "lib/libserver11.a/kzia.o"
# An unexpected error has been detected by HotSpot Virtual Machine:

Check point #6 under "III. Environment: " section of MOS note 748378.1
HTH...

Similar Messages

Can I Open RH5 project file in RH10?

I don't like registration of all kinds until I took an RH arrow in the knee. XDD
Here's my scenario:
My colleague created a project in RH5 long time ago and now she's handing over the project to me.
I copied the whole robo source files folder to my local disk and tried to open it in RH10. Then error saying .cpd file might be corrupt so that RH cannot load the data from the database. I know .cpd file is the cache file for a RH project, right? It's created/overwritten every time you open the RH project. Then I figured, maybe I should delete the .cpd file(as it might be created in RH5 in her machine) before I open it in RH10?
Also, I've tried to open the same project file in RH5(I have RH5 and RH10 installed in the same OS:Win 7). It worked for the first time, with lots of errors of broken links and reference links but failed for the second time, right after I opened that project in RH10. (You might will want to doubt if RH5 is executable in Win 7, I thought it should be but it turned out it is, which is amazing...)
So..here're the questions:
1. Do RH5 and RH10 coexist in Win 7? Some said they don't..
2. Should I delete the .cpd file created in lower version of RH before I open the project created in RH of lower version(say, RH5) in RH of higher version(in this case, RH10)?
3. Can RH10 open the project created in RH5? I know the project created in RH of lower version will be converted in some way when it's opened in RH of higher version. Anyone practiced this successfully?
Thank you!

It proves that X5 can be opened. It does not prove it will work properly in all respects. Also webhelp will likely have issues with some browsers. In other words and to answer your question, both can be on the same machine but that does not mean both will work as designed.
Rh8 could be used with Windows 7 when Rh8 was released, except bits broke until it was patched so the chances of X5 are rather low.
MS Access is not needed on your machine as the CPD is a runtime database. There's no point messing with it, leave Rh to recreate it.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Links do not work RH5 to RH 8

I upgraded a context sensitive, Oracle Help output, from RH5 to RH8. Now several of the old topic ID links do not work. The links are not "broken" and some links within the same topic work and some do not. It gives the message that the address is invalid on the non-working links. Also, the help system does not work when the "search" functionality is used.

Dear jscher2000, thank you for your response! I'm running 16.01 version, so the 3.6.20 version isn't the correct one. I've updated it yesterday.
I also have to mention that today everything seems to work just fine! :) I don't experience the problems anymore and all links work again just normally, eventhough I'm logged into Facebook account. Maybe it was just a temporary bug.
I couldn't say what was the reason to that solution, but I'm glad there aren't problems anymore with Mozilla.
Thank you again and best regards,
Nina

Layout Status not updated following upgrade of RH5 project to RH7

I have over thirty RH5 projects to upgrade to RH7 with two
layouts for each: Microsoft HTML Help (Primary Layout) &
Printed Documentation.
While upgrading the first project I noticed that running the
File > Batch Generate... option following the upgrade does not
update the layout Status to "Generated". I found out that the
layout files are actually updated but the Status still shows as
"Out of date".
Running File > View Primary Layout (after running the
Batch Generate) displays the message, "Microsoft HTML Help output
is out of date. Would you like to compile before running?" with
Yes, No and Cancel options. Clicking the Yes button generates the
Primary Layout again, but this does not update the layout Status to
"Generated" either.
For the status of your layouts to be updated you must close
your upgraded project, reopen it & generate the layouts again.
I have spent much of this afternoon confirming the above
information, I hope that this posting saves you some time that
might be spent wondering why your layout status is not
updating.

You may need to stop all processes of the shadow instance that are running with the old limitations. I'd try the following:
ps -ef | grep sapstart
then kill the process of the shadow instance (check for the system number of the shadow instance to identify).
I'd also try to stop the instance first so all shared memory segments are cleared - and then try to manually start it:
cd <upgrade-directory/bin
./SAPup stopshd
./SAPup startshd
You may assign the user directly to the project but this won't be taken into account if the assignment is not set in /etc/user_attr.,
Markus

TOC problems after RH5 - RH7 upgrade

Hello,
I use RoboHTML to create help projects.
After upgrading one with several subprojects from RH5 to RH7
the following problem occurs:
the TOC of the subproject is not incorporated in the main
TOC, instead the name of the subproject is shown. when clicking
this, the subproject is opened in a new tab (tested on Firefix3 and
Opera9.5), virtualy as a separate project.
The same project was previously published with RH5, with the
subprojects correctly linked.
Also, I reveive the attached java error (again not existing
with RH5) when opening the start page. if I substitute the newly
generated WebHelp.jar with the old one (generated by RH5) the error
ceases but the TOC problem persists.
Any ideas?
Thanks a lot,
Norbert

I recently tested the 9.0.1 upgrade and the hotfix for 9.0.1, but the problem still exists. However, "ColdFusion Jedi" Raymond Camden came up with a workaround. You can read about it here:
http://www.coldfusionjedi.com/index.cfm/2010/9/16/Followup-to-CFGRID-MultiRow-Post
The problem occurred when the Adobe team that released the 9.0.1 upgrade added "multi-row select" functionality to the HTML/AJAX version of CFGRID, but they failed to include the same ID-passing functionality of the previous "single-row select" implementation.
I created a more generic version of Raymond's javascript function which finds the selected row(s). This javascript must reside on every page which contains an HTML cfgrid:
<script type="text/javascript">
function getSelected(gridName,idName) {
    obj = ColdFusion.Grid.getSelectedRows(gridName);
    var selected = "";
    for(var i=0; i<obj.length; i++) {
      if(selected == "") selected = obj[i][idName];
      else selected += "," + obj[i][idName];
    document.getElementById('selectedRowIDs').value = selected;
    return true;
</script>
To force the selected row's ID (or other) field to be passed to to the subsequent page, you must include the following in your CFFORM tag (the field name MUST BE in ALL CAPS):
     onSubmit="return getSelected('gridName','FIELDNAME')"
Example: <cfform name="itemGridForm" action="editItems.cfm" method="post" onSubmit="return getSelected('itemGrid','ITEMID')"...>
You must also include the following hidden field in your cfform which contains the cfgrid:
    
     <cfinput type="hidden" name="selectedRowIDs" id="selectedRowIDs">
On the called page, FORM.selectedRowIDs will contain a list of the selected rows' ID fields (or whichever field you choose when calling the Javascript function).
Message was edited by: el-cott

Very last time RH5/cf8

Ok, if I cant get it working now then I will be abandoning
every single cf app, and switching to something else. Just for
principal. First, I have been trying to get CF8 to work on RH4 ever
since beta, no luck. Fine. I switched to RH5 and it still does not
work. All security has been disabled. After trying to run the
connector, this is what I get:
Could not connect to any JRun/ColdFusion servers on host
localhost.
Possible causes:
o Server not running
-Start Macromedia JRun4 or ColdFusion 8 server
o Server running
-JNDI listen port in jndi.properties blocked by TCP/IP
filtering or firewall
on server
-host restriction in security.properties blocking
communication with server

1. Do you have Apache up and running by itself already?
2. Do you have a user account created specifically for
ColdFusion server to use?
3. Did you give the installer the correct path to your Apache
installation?
4. Are you installing CF 8 Standard or Enterprise?
I currently have CF 8 installed on ubuntu 7.10 and had no
problems. I've installed CF 6 and 7 on Red Hat ES 2 and 3 without a
problem, but I deployed them as EAR files on JBoss. I've also had
CF 4.5 and 5 installed on Fedora and CentOS with few problems.
The only problem I can recall running into was installing CF
5 on CentOS 3.x. A port that CF wanted to use was already in use by
JNDI. We just told JNDI to use a different port and CF started
working just fine.
Have you called the Adobe support line for this? This forum
is not an official support outlet.

Upgrading WCS with RH5.x - do I have the correct files

Hi All,
My supplier seems to be just as ignorant as me regarding the following:
I have a disc labelled 'WCS-WLSEU-RH5-Upgrade.iso' - will I be able to upgrade my WCS' OS (running on RH4 on a WLSE appliance) with this disc, or is it actually for converting a WLSE to WCS (and our supplier has given me the wrong thing- which is what I am afraid of)?
Many Thanks for any help you can give,
Scott

Hi
The image that you have will upgrade the operating system to red hat 5.0. This version is a requeriment if you want to use WCS 5.0 and higher.
You have to burn the image in a CD and boot with this CD in order to perform the upgrade.
Where do you find this image, I have been searching it in the cisco web site but i can`t find it.
Would you mind telling me , where is located this iso file?
Thanks in advanced

RH6 crashes when generating RH5 project

Hello,
I am trying out RH6. I have been a RH5 user for the past 2.5
years. I have a huge progect with complex conditional build tags.
RH5 works fine when I publish with WebHelp Pro. I am not useing an
engine at this time. I was but my project got to big for it. To
many pdf files to search on. Anyway. I open RH6, open the RH5
project. I try to generate WebHelp Pro. The files seam to copy OK
but when the generating tries to update files. Crash!
Exception unknown software exception (0xc000000d) occurred in
application at location 0x78138890. Any Ideas? I am performing this
test on a new computer that has never seen RH5

Hey, BTIMoe
What is confusing Rick and I is trying to understand your
scenario. When you say "I try to generate WebHelp Pro. The files
seam to copy OK but when the generating tries to update files.
Crash! " Is this from the "View Result" locally button after
generation, or have you tried to publish it to a non-RoboEngine web
server and then it crashes?
I have tried this using the RH 6 Trial version without a
problem when I View Results. However you can't publish to a
non-RoboEngine because it's looking for the RoboAPI.asp file to
redirect it to a virtual directory on the server called "Robo". Why
it crashes, I'm not sure. In the past if the RoboEngine was not
configured properly you might get a "failed to connect to server"
error, but I have never had it actually crash the app. Also, what
is the destination to which you are publishing?
Finally, I know the Trial version has a topic limit (though
I'm not sure what the limit is). Could you create a test project of
no more than 20 topics and see if that causes a similar problem?
The bottom line is to choose WebHelp if you are not
publishing to a RoboEngine enabled server (or the new RoboHelp
Server 6 which replaces the old RoboEngine 4).
Let us know exactly what your trying to accomplish and we'll
take another crack at it.
john

IPCS on Install for RH5.2

Hi folks,
Trying to install Oracle on RH5.2. A few novice type questions
are below.
The documentation says to use the ipcs command to list the
system's current shared memory segments. I've searched
everywhere and do not find this command. Could someone point me
to it?
The docs say to create 4 mount points. Are they talking about
device level file system stuff (mke2fs) or just directories
under root?
I don't see anything in the documentation about block size
definition. Does the installer assume 1024 at the filesystem
level and configure for that or do I have to do something that
I'm not finding in the doc set?
Thanks,
craig
null

Federico,
Raid is supported under Linux.It has nothing to do with oracle
supporting it. If the OS uses it, you can with Oracle. (although
it will be alot nicer when they finally get out the Enterprise
Edition so we can play with partitioning of tables, etc and
stripe them across drives.. ;-)
Kevin
Federico Grau (guest) wrote:
: craig (guest) wrote:
: : Hi folks,
: Hi
: : Trying to install Oracle on RH5.2. A few novice type
questions
: : are below.
: : The documentation says to use the ipcs command to list the
: : system's current shared memory segments. I've searched
: : everywhere and do not find this command. Could someone point
me
: : to it?
: On my redhat 5.2 system the command is /usr/bin/ipcs.
: When I use rpm to find more information on the command it says
it
: is the util-linux package under the Utilities/System group.
: There are a couple other posting here on this section of the
: documentation (ex: RH5.2(2.0.36) O8.0.5 Kernel Configuration
: Questions).
: If you are tinkering around setting up a test/simple database I
: would not wory any more about it and simply continue.
: If you are setting up a production database, then based on the
: settings in your initSID.ora file you should compute the size
of
: your SGA and based on that information recompile the kernel
with
: different shared memory size parameters (not really familiar
with
: this... but also don't have the need yet).
: : The docs say to create 4 mount points. Are they talking about
: : device level file system stuff (mke2fs) or just directories
: : under root?
: I believe when they mean 4 mount points, they mean 4 different
: drives and the mount points into your file system. The idea
with
: this, is to spread the control files over seperate drives in
case
: of a drive failure and also to improve performance by spreading
: IO over several devices.
: Again, if you are just tinkering around/testing you can slap
: everything into the same drive/mount point. I decided to
: "fool/trick" the install into thinking I had several mount
: points... to get some exposure to the Optimal Flexible
: Architecture (OFA), so I made four directories u01, u02, u03,
and
: u04 to install into (binaries in the first, and db spread over
: the last 3). Being anal and not liking a lot of trash in my
root
: directory, I put these three subdirectories under a root
: directory /oracle/. If I were to follwo OFA suggestions, I
could
: simply mount four seperate drives on my "u0?" mount
points/stubs.
: It is interesting that nowhere have I seen Oracle talk about
RAID
: in their OFA documentation which sort of makes the various
mount
: points unnecesary. In addition, oracle seems to dump the whole
: OFA idea when running on NT %-)
: : I don't see anything in the documentation about block size
: : definition. Does the installer assume 1024 at the filesystem
: : level and configure for that or do I have to do something
that
: : I'm not finding in the doc set?
: : Thanks,
: : craig
: If you check in the Oracle8 Administrators Reference for Linux,
: section 3-9 ... it states that the default block size for
oracle
: on linux is 2KB (with a range from 2KB - 16KB). I do not
: remember/know how to check the block size on linux, but I
recall
: on earlier version it asking if you wanted to format extfs2 for
: 512/1024/2048 byte blocks with a default to 2048 byte blocks...
: so I would imagine that is where we are at now... regardless,
: oracle recomends setting the Oracle block size to a multiple of
: the linux file system block size.
: Good luck,
: Federico
null

OAS4 + RH5/6 Help!!!!?

Has anyone managed to get OAS4 running on RH5/6 sucessfully?
I have been attempting to get OAS4 with the 4.0.7.1 patch
working on RH6 but as yet I've had no joy. I now have everything
working, but when I try to launch a PL/SQL application via the
admin listener nothing happens, and after looking around I
noticed that the admin listener has died.
I have used the script to work around the ps problems (the cgi
scripts to start OAS use redundant ps options, see below), and
so OAS now starts up correctly.
I have checked the kernel settting NR_TASK and this is 2048.
My host name is set to James, there is no domain name which is
exactly what I specified on installing OAS.
I have altered the max # of connections for all the listeners
and set them to 200 [which prevents the Max Connect Count
exceeds compile time limit (connect limit :
: 256) error -- see below].
Any help, or confirmation if anybody has actually got OAS4
running on RH5 or RH6 would be most appreciated.
James
Work Arounds
I was able to start ORB with some mods to ps command on my RedHat
6.0 and 2.2.11 kernel. Oracle owsctl is using some obsolete
commands to status processes, these don't work "ps mh" and "ps pw
1" and "ps pwww 1"
I renamed /bin/ps to /bin/ps.org
and created /bin/ps with folowing content
chmod +x /bin/ps
#!/bin/sh
case "$1" in
/bin/ps.org
"pw")
/bin/ps.org -w -p $2 $3 $4
"mh")
/bin/ps.org -h $2 $3 $4
"pwww")
/bin/ps.org -w $2 $3 $4
/bin/ps.org $1 $2 $3 $4
esac
It prevents nesty messages to the console and actual makes OAS
4.0.7 work
You may want to change /usr/src/linux/include/linux/tasks.h
and set NR_TASK to 2048 to increase number of available treads
You will need to recompile kernel to make this change.
Hope this helps!
Jaroslaw Sosnicki
Ralf -
You can eliminate this message by going into the "Network"
configuration for your "www" listener and changing the "max
connections" parameter to 256 or less
Regards
Ralf Duenkelmann (guest) wrote:
: During startup of OAS we get the following warning:
: Max Connect Count exceeds compile time limit (connect limit :
: 256)
: Does anyone know what that means and what should be changed?
: Ralf
null

First, Developer 2000 (Forms/Reports 6) was never supported to work on Vista. Second, this version has been desupported for many years. Third, what exactly is your question?
Here is the remaining documentation for Forms 6.0 & 6i. Most other references have been removed since this version is obsolete.
http://www.oracle.com/technology/products/forms/techlisting.html
http://www.oracle.com/technology/documentation/dev_arch.html
Although completely unsupported, here is some information provided by Steve Cosner regarding installing on Vista:
Re: Forms 6i installed and running on Windows Vista

O8i on RH5.1

Dear all:
I am install O8i on RH5.1. I meet some problems.
1. After i finish running root.sh as root, i can't connect to
database with sqlplus. The error tells me i have not enough
previlige.(But i can use sqlplus with login account oracle(db
account of OS(). Anyone has install O8 on RH5.1?
null

That's working as designed: you have to set the proper
environment variables and use username/password if working as
root (which you shouldn't do, anyway).
To check out the environment variables have a look at .profile of
the Oracle user.
Yang Yong (guest) wrote:
: Dear all:
: I am install O8i on RH5.1. I meet some problems.
: 1. After i finish running root.sh as root, i can't connect to
: database with sqlplus. The error tells me i have not enough
: previlige.(But i can use sqlplus with login account oracle(db
: account of OS(). Anyone has install O8 on RH5.1?
null

Agent for RH5 x86_64?

Is there an agent that can be installed on Red Hat 5 EL x86_64? I downloaded the 64 bit 10.2.0.3 agent but attempting to push it from Grid Control results in an error message that the agent is only supported on RH3/RH4. Attempting to install driectly on RH5 using the runInstaller gets an UnsatisfiedLinkError looking for jre/1.4.2/lib/i386/libawt.so. Is there a trick I need to do to get the runInstaller to run on 64 bit? I didn't have any problem installing 64 bit CRS/ASM using the runInstaller as/is from those downloads.
thanks.

Do you not have metalink or did you try their suggestion/note?
Subject:      "Exception java.lang.UnsatisfiedLinkError: ../jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory occurred" on RHEL5/OEL5 for 10.2 x86 or x86_64 install
     Doc ID:      Note:443617.1      Type:      PROBLEM
     Last Revision Date:      28-NOV-2007      Status:      PUBLISHED
In this Document
Symptoms
Cause
Solution
References
Applies to:
Oracle Server - Enterprise Edition - Version: 10.2.0.1.0 to 10.2.0.1.0
Oracle Server - Standard Edition - Version: 10.2.0.1.0 to 10.2.0.1.0
Linux x86-64
Linux x86
This article applies to Red Hat Enterprise Linux RHEL 5 ( x86 and x86_64)
This article applies to Oracle Enterprise Linux OEL 5 (x86 and x86_64)
Symptoms
While installing Oracle database 10.2.0 on RHEL 5 (Redhat Enterprise Linux) or OEL 5 (Oracle Enterprise Linux), you get the following error before Oracle Universal Installer (OUI) gets invoked.
Exception java.lang.UnsatisfiedLinkError: /tmp/OraInstall<time_stamp>/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory occurred..
java.lang.UnsatisfiedLinkError: /tmp/OraInstall<time_stamp>/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(OiifmGraphicInterfaceManager.java:222)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:193)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:202)
at oracle.sysman.oii.oiic.OiicInstaller.getInterfaceManager(OiicInstaller.java:436)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:926)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:866)
Exception in thread "main" java.lang.NoClassDefFoundError
at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(OiifmGraphicInterfaceManager.java:222)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:193)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:202)
at oracle.sysman.oii.oiif.oiifm.OiifmAlert.<clinit>(OiifmAlert.java:151)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:984)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:866)
Cause
The i386 version of the libXp package is missing. The Oracle Universal Installer ( OUI ) requires the file libXp.so.6 and this file is installed with the package libXp in RHEL 5 and OEL 5.
Issue the following to confirm the missing rpm:
% rpm -qa --queryformat "%{NAME}-%{VERSION}-%{RELEASE} (%{ARCH})\n" | grep libXp
Solution
The package libXp was not installed in RHEL 5/OEL 5 with default RPM packages, so it will need to be installed manually. In RHEL 4 this file was provided by the package xorg-x11-deprecated-libs which is installed with default package installation but this is not the case for RHEL5/OEL5 and is now provided with a different rpm, the libXp rpm.
Install the package libXp by the command:
# rpm -ivh </path/to/>libXp.<version>.i386.rpm

Backward Compatibility RH5 vs. RH6

I have versions RH5 and RH6 in my office. I just edited and
compiled a RH5 file using RH6. RH5 will no longer open this file.
Is there a feature or process in RH6 which will either allow saves
as an earlier version or conversion to an earlier version?

HI qboss and welcome to our community
Unfortunately there is no backward compatibility built in.
Doesn't mean you can't do it though. Take a look at
this
link for some information on it.
Cheers... Rick

Need guidance on upgrading RH5 Merged WebHelp project to RH8

I just upgraded from RH5 to RH8 to use with a new product my company is developing. I have quite a large merged help project that I have been editing and reorganizing. I have a version published and in use but I have an updated version about 75% finished. I would like to do in RH8. Is there anything I need to watch for or recommended method to upgrading each child and then the parent? Any help would be sincerely appreciated.

Hi there
There are two patches.
Help > Updates...?
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 moments from now - $24.95!
Adobe Certified RoboHelp HTML Training
SorcererStone Blog
RoboHelp eBooks

Help does not launch after upgrading from RH5 to RH7

My problem is similar to CaroMe1's. Topics within chm files
created using RH5 and integrated into our software product launch
correctly when a Help button is clicked on a dialog. After
upgrading to RH7, using the the same project files, chm files
created using RH7 do not launch at all; that is, nothing happens
when a Help button is clicked on any dialog.
Thanks in advance for any advice!

The .chm filename and the .xpj filename are the same.
Sorry if I was swerving and incoherent! I probably shouldn't
have posted after traveling and no sleep!
Here is how I tested for the source of this problem:
1. I created a .chm file using RH 5, integrated it into our
product, clicked on the Help button on any of our dialogs, and the
appropriate Help topic displayed.
2. I created a .chm file using RH 7 (using the exact same
project files as in the previous step), integrated it into our
product, clicked on the Help button on any of our dialogs, and
nothing happened. No topic, no Help. Nothing.
Is that a better description of the problem? (I hope)
Thanks again!

CPUJul2009 on 11.1.0.7 on RH5 64bit

Similar Messages

Maybe you are looking for