CR won't run via Business One
I have Crystal Reports 2008 installed with Business One, but I can only get the reports to run if I'm working on the server. At any other workstation, I get a Microsoft .Net Framework error when I try to run a Crystal Report from SAPB1. I followed the instructions that came with the CR download, and can start the add-on from within SAPB1. The link to Crystal Reports shows up in the B1 main menu, and I can get into all the administration settings. I've tried re-installing the .Net framework, but I still get the error.
Exception Text **************
CrystalDecisions.Shared.CrystalReportsException: Load report failed. ---> System.Runtime.InteropServices.COMException (0x80004005): The device is not ready. at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
--- End of inner exception stack trace ---
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport()
at CrystalDecisions.CrystalReports.Engine.ReportDocument.get_Database()
at SAP_CR.MyForms.frmReportViewer.ConfigureCrystalReports()
at SAP_CR.MyForms.frmReportViewer.frmReportViewer_Load(Object sender, EventArgs e)
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
SAP_CR
Assembly Version: 2.0.0.6
Win32 Version: 2.0.0.6
CodeBase: file:///C:/Program%20Files/SAP/SAP%20Business%20One/AddOns/SAP_CR/SAP_CR.exe
Interop.SAPbouiCOM
Assembly Version: 8.0.0.0
Win32 Version: 8.0.0.0
CodeBase: file:///C:/Program%20Files/SAP/SAP%20Business%20One/AddOns/SAP_CR/Interop.SAPbouiCOM.DLL
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
CustomMarshalers
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/CustomMarshalers/2.0.0.0__b03f5f7f11d50a3a/CustomMarshalers.dll
Interop.CR_Crypto
Assembly Version: 6.0.0.0
Win32 Version: 6.0.0.0
CodeBase: file:///C:/Program%20Files/SAP/SAP%20Business%20One/AddOns/SAP_CR/Interop.CR_Crypto.DLL
System.Data
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
System.Transactions
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Transactions/2.0.0.0__b77a5c561934e089/System.Transactions.dll
System.EnterpriseServices
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.EnterpriseServices/2.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dll
CrystalDecisions.Windows.Forms
Assembly Version: 12.0.2000.0
Win32 Version: 12.0.2000.683
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/CrystalDecisions.Windows.Forms/12.0.2000.0__692fbea5521e1304/CrystalDecisions.Windows.Forms.dll
CrystalDecisions.Shared
Assembly Version: 12.0.2000.0
Win32 Version: 12.0.2000.683
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/CrystalDecisions.Shared/12.0.2000.0__692fbea5521e1304/CrystalDecisions.Shared.dll
CrystalDecisions.ReportSource
Assembly Version: 12.0.2000.0
Win32 Version: 12.0.2000.683
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/CrystalDecisions.ReportSource/12.0.2000.0__692fbea5521e1304/CrystalDecisions.ReportSource.dll
CrystalDecisions.CrystalReports.Engine
Assembly Version: 12.0.2000.0
Win32 Version: 12.0.2000.683
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/CrystalDecisions.CrystalReports.Engine/12.0.2000.0__692fbea5521e1304/CrystalDecisions.CrystalReports.Engine.dll
System.Web
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Web/2.0.0.0__b03f5f7f11d50a3a/System.Web.dll
CrystalDecisions.ReportAppServer.CommLayer
Assembly Version: 12.0.1100.0
Win32 Version: 12.0.1100.683
CodeBase: file:///C:/WINDOWS/assembly/GAC/CrystalDecisions.ReportAppServer.CommLayer/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.CommLayer.dll
CrystalDecisions.ReportAppServer.ClientDoc
Assembly Version: 12.0.1100.0
Win32 Version: 12.0.1100.683
CodeBase: file:///C:/WINDOWS/assembly/GAC/CrystalDecisions.ReportAppServer.ClientDoc/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.ClientDoc.dll
CrystalDecisions.ReportAppServer.DataSetConversion
Assembly Version: 12.0.2000.0
Win32 Version: 12.0.2000.683
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/CrystalDecisions.ReportAppServer.DataSetConversion/12.0.2000.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.DataSetConversion.dll
CrystalDecisions.ReportAppServer.DataDefModel
Assembly Version: 12.0.1100.0
Win32 Version: 12.0.1100.683
CodeBase: file:///C:/WINDOWS/assembly/GAC/CrystalDecisions.ReportAppServer.DataDefModel/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.DataDefModel.dll
CrystalDecisions.ReportAppServer.Controllers
Assembly Version: 12.0.1100.0
Win32 Version: 12.0.1100.683
CodeBase: file:///C:/WINDOWS/assembly/GAC/CrystalDecisions.ReportAppServer.Controllers/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.Controllers.dll
CrystalDecisions.ReportAppServer.CubeDefModel
Assembly Version: 12.0.1100.0
Win32 Version: 12.0.1100.683
CodeBase: file:///C:/WINDOWS/assembly/GAC/CrystalDecisions.ReportAppServer.CubeDefModel/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.CubeDefModel.dll
CrystalDecisions.ReportAppServer.ReportDefModel
Assembly Version: 12.0.1100.0
Win32 Version: 12.0.1100.683
CodeBase: file:///C:/WINDOWS/assembly/GAC/CrystalDecisions.ReportAppServer.ReportDefModel/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.ReportDefModel.dll
BusinessObjects.Licensing.KeycodeDecoder
Assembly Version: 12.0.1100.0
Win32 Version: 12.0.0.683
CodeBase: file:///C:/WINDOWS/assembly/GAC/BusinessObjects.Licensing.KeycodeDecoder/12.0.1100.0__692fbea5521e1304/BusinessObjects.Licensing.KeycodeDecoder.dll
Please re-post if this is still an issue to the SAP Business One Forum
Similar Messages
-
Running SAP Business One on a 64-bit server
One of our clients wants to upgrade their server to a 64-bit server running Windows Server 2008.
What are the implications of this and do we also need to then use Microsoft SQL Server 2008?
I went to this web link: https://websmp103.sap-ag.de/smb/sbo/platforms and found some info, but the questions I still have is the following:
1. If we upgrade to SQL 2008, do we have to buy licenses or can we also just get an installation from SAP with our software (if we've gone live over 2 years ago already on SQL 2000, then upgraded to SQL 2005).
2. Can we still stay on SQL 2005 or is it better to use SQL 2008 and what is the implications?
I found the following on the link posted above:
Mar 11: SAP Business One 2007 now supports Microsoft® SQL Server 2008.
Microsoft SQL Server 2008 is now fully supported by SAP Business One 2007 A (as of patch 47) and SAP Business One 2007 B (as of patch 10), including SAP-developed add-ons.
Jan 21: SAP Business One 2007 now supports Microsoft® Windows Server 2008.
Microsoft Windows Server 2008 is now fully supported by SAP Business One 2007 A (as of patch 46) and SAP Business One 2007 B (as of patch 09), including SAP-developed add-ons. 64-bit and WTS support are still pending and will be announced when available.
What exactly does the bold part mean?
Any tips/hints on making this decision will be greatly appreciated!
Thanks,
AdeleHi Adele,
"64-bit and WTS support are still pending and will be announced when available" means that Windows 2008 64bit has not been tested working with SAP Business One yet. Thus not supported (yet).
Same applies to W indows T erminal S erver 32bit and 64bit.
>
Adele le Roux wrote:
> 1. If we upgrade to SQL 2008, do we have to buy licenses or can we also just get an installation from SAP with our software (if we've gone live over 2 years ago already on SQL 2000, then upgraded to SQL 2005
I am not sure if procedure as described in note [928839|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMSZ3PTU4ODAwMDAr)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E¬e_numm=928839] will apply. In order to get excact clarification I have asked the owner of the note to update it reagarding MSSQL 2008 licenses.
>
Adele le Roux wrote:
> 2. Can we still stay on SQL 2005 or is it better to use SQL 2008 and what is the implications?.
Yes, you can still stay on MSSQL 2005 and upgrade later to MSSQL 2008. The other way around will not work. MSSQL 2008 is currently supported only as of SAP Business One 2007 A PL47 or SAP Business One 2007 B PL10. Refer to [http://service.sap.com/smb/sbo/platforms|http://service.sap.com/smb/sbo/platforms].
Regards
Mario -
How to run SAP BUSINESS ONE 8.8 clients on windows and use MaxDB on linux/W
Good day,
As the subject shows we have SAP BUSINESS ONE 8.8 and I want to find out how to use it in combination with MaxDB instead of MS SQL. I find a lot of MaxDB stuff on the net but no guides on how to setup SAP BUSINESS ONE 8.8 clients on windows workstations and connect them to MaxDB.
Is this possible and if so how do I go about doing it ?
Any assistance is greatly appreciated .Hi,
I suggest you to check the supported server for B1 in this link:
http://service.sap.com/smb/sbo/platforms
You will know the sap b1 supported platform.
If you really want to use maxDB on linux/W as B1 server, you can send a development request to SAP AG.
JimM -
New HD won't run without old one...
hello.
After lots of help from my educated peers on this discussion site, i installed a 2nd hard drive into my G5 quad power pc.
I then used carbon copy cloner to clone the old drive onto the new one(because i recently moved and forgot my install disk on the west coast), and when i re-booted, i was able to boot from the old HD (which still barely works), and then i was able to select the new HD in system prefs - startup disk, and then re-booted agian, and it would boot up on the new HD, and work great.
And every time after that, it would always boot from the new HD, and work fine.
Except that the old HD is still in the other bay, apparently working in conjunction with the new one.
I know this because I cannot get the new HD to boot if it's the only HD in the machine. I tried both HD bays.
I even tried to boot up while holding down the Option key, but the HD won't show up at all. Tried both HD bays.
Any thoughts?
I'm having my friend ship my my install disk, but if carbon copy cloner is as good as it says, i shouldn't have to do a clean install and have to go through the hassle of doing a full backup, and restoring....etc..etc..etc.
Any thoughts?
i tried every combination of HD bays with both HDs.
The new one just won't work by itself.
And, the old HD needs to be in the top(primary bay), or else nothing works.
thanks!Ya know, today, my Mail program is acting very funky.
I launch it, and I get the spinning color wheel immediately, and then it quits itself.
Also, when I reboot, i see a quick flash of weird graphics on the monitor for a split second.
Doesn't look right.
Oh, and now, I'm finding out that the machine randomly reboots from either HD.
I just tried to reboot, and it tried to boot from the old HD in the other bay. ( i know this because the old HD takes 5 minutes to boot, and the internal fans run at full speed during the whole boot up process ).
Now, i tried to reboot again, and it booted fine from the new HD>
Weird.
maybe i'll try super duper.
Problem is that the old drive took 2 full days to clone when i used CCC.
The old HD is so sluggish that it is barely usable.
Hopefully i can get a full clone out of it.
Regardless, i'm just going to have to do a clean install to feel comfortable about this machine at this point. -
My 2009 iMac freezes and won't run more than one application at a time - how can I fix this?
Help! My iMac has been getting worse regarding freezing, especially when trying to open iPhoto. It will load slowly, and then I get the pinwheel of death for ever, until I shutdown and try over again. It usually takes several tries, and usually overnight. How can I resolve this issue?
First, back up all data immediately, as your boot drive might be failing.
Step 1
This diagnostic procedure will query the log for messages that may indicate a system issue. It changes nothing, and therefore will not, in itself, solve your problem.
If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|timed? ?o' | tail | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key.
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
Step 2
There are a few other possible causes of generalized slow performance that you can rule out easily.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Reset the System Management Controller.
Run Software Update. If there's a firmware update, install it.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
Step 3
When you notice the problem, launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the View menu or the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for User, System, and Idle at the bottom of the window.
Select the Memory tab. What value is shown in the bottom part of the window for Swap used?
Next, select the Disk tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in andWrites out.)
Step 4
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard by pressing the key combinationcommand-C. Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long. -
MaxDb backup won't run because thinks one is already running but is not!
I'm trying to backup my production livecache maxdb database, but am getting errors (-104, -7079) indicating a backup or other dbm command is already running, but IT IS NOT!
Is there any way to clear this condition so a backup can be taken, without bouncing this production db?
Thanks!
Jesseaz18u3387 DR for az18u248:/ # su - adpadm
az18u248:adpadm> dbmcli inst_enum
OK
7.6.00.35 /sapdb/ADP/db
az18u248:adpadm> dbmcli db_enum
OK
ADP /sapdb/ADP/db 7.6.00.35 fast running
ADP /sapdb/ADP/db 7.6.00.35 quick offline
ADP /sapdb/ADP/db 7.6.00.35 slow offline
ADP /sapdb/ADP/db 7.6.00.35 test offline
az18u248:adpadm>
az18u248:adpadm> xinstinfo ADP
IndepData : /sapdb/data
IndepPrograms : /sapdb/programs
InstallationPath : /sapdb/ADP/db
Kernelversion : KERNEL 7.6.00 BUILD 035-123-139-084
Rundirectory : /sapdb/data/wrk/ADP
az18u248:adpadm>
dbmcli on ADP>medium_getalll
OK
log_backup_tsm /sapdb/ADP/backup/log_backup_tsm PIPE LOG 0 8 NO NO 20101217070405 20101217070405 BACK
backup_to_filesystem /sapdb/ADP/sapdata2/temp_log_backup/log_backup_fs FILE AUTO 0 8 NO NO 20101217071653 20101217071653 NONE
data_backup_tsm /sapdb/ADP/backup/data_backup_tsm PIPE DATA 0 8 NO NO 20110614222320 20110614222320 BACK
TSM_backup /sapdb/ADP/backup/tsm_medium PIPE DATA 0 8 NO NO 20110620093743 20110620093743 BACK
BACKORA /sapdb/ADP/backup/medium PIPE DATA 0 8 NO NO 20110620094357 20110620094357 BACK
BACKLOG /sapdb/ADP/backup/medium_log PIPE LOG 0 8 NO NO 20110620094414 20110620094414 BACK
az18u248:adpadm> x_cons ADP show active
SERVERDB: ADP
ID UKT UNIX TASK APPL Current Timeout Region Wait
tid type pid state priority cnt try item
T73 4 -1 BUPvol -1 Vsuspend (203) 0 0 1662580(s)
az18u248:adpadm>
Above is in answer to the 1st questions asked in the last post.
Not sure how to answer question 3...
3. What command did you run & what error exectly did you get?
Check dbm.prt and knldiag < KnlMsg as of 7.7 > files.
...I was taught to use the dbm.ebp file for troubleshooting.
Errors were -104 and -7079 -
Windows 2008 Server R2 & SAP Business One
Does anyone have any experience, good or bad, with SAP Business One and Terminal Service on Windows 2008 Server R2? We are finding a number of issues with this configuration and we are looking for any feedback that is out there.
Here is the situation - our customer is running SAP Business One v2007 SP01 PL09 Hotfix4 on a Windows 2008 Server R2 machine. All users (15 max) access SBO via Terminal Service to this machine, which also holds the databases (SQL Server 2005). The machine currently has 20GB of RAM.
What we are finding is:
1) When any process related to SBO (SBO core or add-ons) consumes some portion of memory, none of that memory is ever released back to the O/S until SBO is completely closed. So over the course of a day each user ends up simply consuming more and more memory as forms are opened for transactions. While we do see this in Windows 2003 Server to some extent, at least some memory is released when a given form is closed.
2) Once the system hits a point where around 75% of RAM is consumed the users start seeing application "hangs" and are forced to manually terminate SBO (via Task Manager) and restart. There doesn't seem to be any paging or use of virtual memory (if my terms are right) in use.
3) If the system is busy and a new window/form is opened the new window immediately (within one or two seconds) presents the "Not Responding" message on the new window. Depending on the circumstances the application is simply waiting for resources and will continue opening normally.
I would appreciate feedback from anyone who has experience with Windows 2008 Server R2; and especially using it for Terminal Services. My personal feeling is that it is a platform that should be avoided but we would certainly like to hear what other folks have to say.
Regards,
Ross Unger
Third Wave Business SystemsI believe the supporting of this OS is still on Planned basis. You may check with SAP support to give them a good user case to fight with any non-compatible issues.
Thanks,
Gordon -
Addon not loading - B1 Usability Package for all users in SAP Business One
Hello, I am a new admin to SAP B1 and am about to go live in a few weeks. We are running SAP Business One v. 8.80.227.
Envirorment details: Dedicated server for SAP database, and Terminal Server for remote connections.
I have a demo group of users in Active Directory that have permission to Remote Desktop to the TS and load SAP. For now, theses users are local admins on the TS. ( Permissions to be revised once addon issues are worked out ). I am the companies tech, and we have a SAP implementation company leading the project development.
Currently the addons that we are running are CRSB1Addon SAP 8.8 and B1UP from boyumit.
For one of the users in the Active Directory Security Group all the addon's work great. However the other users get the error below;
When logging in the system message window shows the following:
Failed to assign SAP Business One user license to SAP Add-ons. The Add on is configured to automatically load on startup, yet once I get the error, I open the Add on Manager and I don't see the B1UP in either tab at all.
The error on the TS in the log is here:
Log Name: Application
Source: Application Error
Date: 18/03/2010 10:55:25 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: OVCL-TS.laurieroptical.local
Description:
Faulting application SAP Business One.exe, version 8.80.227.0, time stamp 0x4b8fadd4, faulting module ole32.dll, version 6.0.6002.18005, time stamp 0x49e037d7, exception code 0xc0000005, fault offset 0x000472da, process id 0x1f14, application start time 0x01cac6a4a2da01c9.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-03-18T14:55:25.000Z" />
<EventRecordID>3778</EventRecordID>
<Channel>Application</Channel>
<Computer>OVCL-TS.laurieroptical.local</Computer>
<Security />
</System>
<EventData>
<Data>SAP Business One.exe</Data>
<Data>8.80.227.0</Data>
<Data>4b8fadd4</Data>
<Data>ole32.dll</Data>
<Data>6.0.6002.18005</Data>
<Data>49e037d7</Data>
<Data>c0000005</Data>
<Data>000472da</Data>
<Data>1f14</Data>
<Data>01cac6a4a2da01c9</Data>
</EventData>
</Event>
Any comments would be greatly appreciated.
Thanks
Edited by: dontforgetken on Mar 18, 2010 4:05 PMhello Ken - Boyum IT has its own License Administration - path of Administration > Add Ons > B1 Usability Package > License Administration...
Do all of the users have a checkmark to give them access???
When a user has only the Main Menu window open, select the "Form Settings" icon and follow the same path on the Form Settings window that is diplayed and make sure they have checkmarks next to the B1 Usability Package to be "Visible".
Are all of the user set to display Boyum IT on their machines???
LOL - I am not technical so I have no idea what that other stuff means...
Hope that helps...
Zal -
SAP Business One 2007 - SQL Security best practice
I have a client with a large user base running SAP Business One 2007.
We are concerned over the use of the sql sa user and the ability to change the password of this ID from the logon of SAP Business One.
We therefore want to move to use Windows Authentication (ie Trusted Connection) from the SAP BO logon. It appears however that this can only work by granting the window IDs (of the SAP users) sysadmin access in SQL.
Does anyone have a better method of securing SAP Business One or is there a recommended best practice. Any help would be appreciated.
DamianSee Administrators Guide for best practise.
U can use SQL Authentication mode Don't tick Remember password.
Also check this thread
SQL Authentication Mode
Edited by: Jeyakanthan A on Aug 28, 2009 3:57 PM -
Rounding Issue in Sap Business One 2007A
Hi Experts:
Could you please assit us?: We are running Sap Business One 2007A SP01 PL08, Our client is using Rounding Method "By Document". and the option "Automatic Rounding for document" is only available for sales documents. How can we achieve to use Automatic rounding in header total fields in Purchase Documents????. Can we achieve this by a Formatted searches?
And secondly, In all marketing documents, under the "Define tax amount distribution" we need to round the amount field. ie: if the amount is $2250.01 to be rounded in 2250 and if the amount is 2250.89 to be rounded in 2251. Can we achieve this with a formatted search as well in the Amount field in this table?.
Thanks very much in advance
Claudia GutierrezHi Claudia Gutierrez,
Have you checked Round function by query? You may check this thread first:
Re: Rounding Tax amount in row
Thanks,
Gordon -
SAP Business One Best-Practice System Setup and Sizing
<b>SAP Business One Best-Practice System Setup and Sizing</b>
Get recommendations from SAP and hardware specialists on system setup and sizing
SAP Business One is a single, affordable, and easy-to-implement solution that integrates the entire business across financials, sales, customers, and operations. With SAP Business One, small businesses can streamline their operations, get instant and complete information, and accelerate profitable growth. SAP Business One is designed for companies with less than 100 employees, less than $75 million in annual revenue, and between 1 and 30 system users, referred to as the SAP Business One sweet spot. The sweet spot covers various industries and micro-verticals which have different requirements when it comes to the use of SAP Business One.
One of the initial steps during the installation and implementation of SAP Business One is the definition of the system landscape and architecture. Numerous factors affect the system landscape that needs to be created to efficiently run SAP Business One.
The <a href="http://wiki.sdn.sap.com/wiki/display/B1/BestPractiseSystemSetupand+Sizing">SAP Business One Best-Practice System Setup and Sizing Wiki</a> provides recommendations on how to size and configure the system landscape and architecture for SAP Business One based on best practices.For such high volume licenses, you may contact the SAP Local Product Experts.
You may get their contact info from this site
[https://websmp209.sap-ag.de/~sapidb/011000358700001455542004#India] -
(local) only on Current Server when installed SAP Business One to a Standard User account
Hi. We have a client. Setup of Windows account was like this.
1. Built-in Administrator account is disabled.
2. Primary mandatory user account was made with Administrator rights (e.g. User).
3. Updated Windows 7 Pro 32-bit SP1 and installed all applications except for SAP Business One
4. Created new windows user account with Administrator rights (e.g. Admin)
5. Changed the primary account (e.g. User) from Administrator to a Standard User type
6. During SAP Business One client app installation, image below always notify even UAC was turned-off and installation proceeds without any error.
7. After installation, image below was the result.
8. Made some testing by enabling the built-in Administrator account and re-installed SAP Business One client app and result was the client app works ok with this account.
9. Created new user account with Standard User type and run the SAP client app and result was also ok with this account.
10. Run SAP Business One client app on primary made account (e.g. User-Standard User type) and the the made Administrator account (e.g. Admin) but same (local) only result occurred.
Any ideas Thanks in advance!Hi,
Please check SAP note:
1583117 - Choose company list is empty in MS Windows Vista,7,2008.
Thanks & Regards,
Nagarajan -
Kde 4.1 suddenly won't run properly
I'm not sure what caused it, but KDE 4.1 suddenly won't run properly on one of my machines. It will start to run and die right at the point when the "splash screen" disappears. If I click the popup to make it go away, the desktop will appear for less than a second before being dropped out of X.
The error message that I see after that is:
xprop: unable to connect to display :0
My main "DE" (Fluxbox) works perfectly, so I don't think that it's a problem with X itself.
The video card brand is nVidia, if that helps any....If you're getting dropped out of X then it's X that's crashing.
I will assume you have desktop effects enabled and they are causing your graphics driver to die somehow. You can disable desktop effects from the terminal by typing:
kwriteconfig --file kwinrc --group Compositing --key Enabled --type bool false -
SAP Business One iPhone App konfigurieren...
Hallo zusammen,
Seit heute gibt es ja eine SAP-eigene iPhone-App.
Link zum APPSTORE
Dort findet man auch einen Link zur Info-Seite von SAP auf der steht:
You need to be running SAP Business One version 8.8 with a professional user license. Before you start using the app, make sure your SAP partner configures the mobility settings in SAP Business One.
Mehr aber leider nicht.
Weiß irgendjemand, wie man die Einstellung im Business One vornimmt?
Bin für jede Information dankbar!
LG BastiHallo zusammen,
mir ist es soeben gelungen mit meinem iPhone eine Verbindung (zumindest im Wlan-Netz )herzustellen.
Hoffe das klappt bei euch genauso.
Ich habe folgendes gemacht:
1. Beim Benutzer den Haken bei "Mobile-Benutzer" gesetzt
2. Dann die Mobilfunknummer eingetragen
3. Dann die UUID vom iPhone eingetragen (die ewig lange Nummer)
4. Dann dem Benutzer eine B1i-Lizenz zugewiesen
5. Auf dem iPhone in den Einstellungen eingetragen:
Server: <IP-Adresse>:8080 (dort musss die B1i installiert sein und laufen)
SSL hab ich ausgemacht, da deswegen eine Fehlermeldung beim Verbinden kam
Benutzercode: Benutzer aus SAP wo ich meine Mobilnummern und UUID eingetragen habe
Mobiltelefon: meine Mobilnummer
Fertig.
Dauert beim Verbinden eventuell eine gewisse Zeit aber dann funktioniert es super.
Gruß
Jacqueline -
The office I work in uses a very old version of ACT!, an accounting package. This package has a component called SwiftPage, an antiquated email system that enables us to email from the ACT DB. SwiftPage runs via the web browser.
Firefox just did an auto update (that I will have to find out how to turn off) and now SwiftPage won't run as it is not compatible.
Can I "roll-back" my version of Firefox or do I have to uninstall and try to re-install an older version?
HELP!Try loading and using the add-on from this link: https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
Many add-ons do in fact work if you force them to run. The procedure to roll-back is given in this article: [[installing previous versions of firefox]]
Unfortunately the official Firefox policy is that you downgrade to 3.6 which is supported for a while longer, and not the now unsupported Firefox 4. If after installing and running the ''add-on compatibility reporter'' you still have problems there are ways around the official policy.
I think it is absurd that Firefox 4 may be used by tens of millions of users one day and a few days later those that upgrade to Firefox 5 should be not only told not to use a now unsupported browser, if they need to revert due to problems, but are actually obstructed in attempts to do so. See also [/questions/840397#answer-205154]
Maybe you are looking for
-
Can't open Sharepoint Online site in Sharepoint Designer 2013
Hello! I am trying to open a Sharepoint Online secure site in Sharepoint Designer 2013 (v15). When I try to open the site in Sharepoint Designer i get an error stating: "Server error: The version of Microsoft SharePoint Foundation running on the ser
-
Android app in Flash CS5 getting menu to pop up using actionscript
Hi, anyone out there know how to get a menu to pop up in Flash CS5 when coding for an android app. Basically I have a nice, simple app that when you press the menu button on your phone I want a movie clip to pop up at the bottom of the screen tha
-
I am not talking about Bookmarks. Thanks in advance for your help.
-
Almost perfect the third time around; space bar...
Here's my short MacBook Pro story. Got one, whine, sent back. They replaced it, got another one with a whine. This time they said they'd only repair it. I sent it for repair and they couldn't repair it so they replaced it. Third MacBook I get doesn't
-
Internal modem not detecting dial tone
I have an iMac G3 CRT 333MHz (Lime) which is having trouble connecting to my dial-up internet connection. I am fearing that my internal modem is 'burnt out', and am wondering if anyone out there has any additional troubleshooting tips, or any advice