CR XI R2 - Dynamic Images not working on production machine

We are using VS2005 on windows server 2003 as our development environment. We have CR XI R2 installed there. We have a crystal report set up to use dynamic images and it is working fine. On the report, the graphic location of the picture is set to a formula which we set dynamically from VS2005.
When we move our report and code to the production environment, the dynamic image is not showing. We have the report showing the formula, and it is the correct path to the image. What are we missing?!

I am having the same problem. This works no problem in development on a Vista machine but once I try and run it in production on a Windows 2003 server, it won't work.
Did anyone ever come up with a resolution to this proble?
I know it's not a file access rights issue as the url that I am calling is unprotected I can call it using a simple web browser.
http://details.planelements.com/Details/BarCode/BarCode.aspx?dataToEncode=12345
I am pretty confident at this point (after insalling the lastest service pack) and trying everything that this is a security issue, but for the life of me I cant figure out what it is.
To date I have tried the following:
1) Gave the ASP.Net account Administative rights - Didnt' work
2) Changed the dynamic value from usin the above specified url to a local file system file (ie. c:\temp\Image.jpg). This worked, so I know the dynamic value code is being executed.
3) Uninstalled the Internet Explorer Enhanced Security settings just to make sure that something was not going on there (Since I don't have that intalled on my Vista machine) - Didnt' work
4) Tried calling a hard coded image locally (http://localhost/Image.jpg) - Didn't work
At this point I don't know what else to try. I am going to go through and see if I might need to assign some rights to the administrator account that are granted to the "local system" account, but after that I am not sure what else to try.
Anyone else have any additional suggestions?

Similar Messages

UIX: how to get dynamic image generation working on ias10G?

Hi,
Anybody got UIX Dynamic Image Generation working on ias10G, on unix? My Images do not get generated (the page only shows the plain links)
My env:
- ias10G
- AIX Version 5
- java version: unknown, do not know what version ias10G is using
On earlier versions (OC4J 903) we had to make sure an XServer was running and pointed our DISPLAY variable to that server. When the XServer was down, we got a nice error message in the application logs. However on ias10G I cannot figure out where to set this variable and I cannot find any error messages.
Can anybody please help me out a bit?
Cheers,
Martijn

Hi Andy,
Thanks for your reply. However, I have not yet been able to get it working.
I have verified that the java version is indeed (this is what the oc4j logfile shows when I supply the -showversion parameter)
java version "1.4.1"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.1)
Classic VM (build 1.4.1, J2RE 1.4.1 IBM AIX build ca1411-20030930 (JIT enabled: jitc))The relevant fragment of the opmn.xml:
          <process-type id="oc4j_cif_mh" module-id="OC4J">
               <module-data>
                  <category id="start-parameters">
                     <data id="java-options" value="-Djava.security.policy=/oracbd/j2ee/oc4j_cif_mh/config/java2.policy -
Djava.awt.headless=true -Xmx75m -Xms75m -showversion"/>
                     <data id="oc4j-options" value="-properties"/>
                  </category>
                  <category id="stop-parameters">
                     <data id="java-options" value="-Djava.security.policy=/oracbd/j2ee/oc4j_cif_mh/config/java2.policy -
Djava.awt.headless=true"/>
                  </category>
               </module-data>
               <start timeout="900" retry="2"/>
               <stop timeout="120"/>
               <restart timeout="720" retry="2"/>
               <port id="ajp" range="3301-3400"/>
               <port id="rmi" range="3201-3300"/>
               <port id="jms" range="3701-3800"/>
               <process-set id="default_island" numprocs="1"/>
            </process-type>Finally, your JSP passes the test. I can access it. But still no uix image generation. Are there any logfiles I can check for error messages on the failing image generation? May it be a web cache problem?
Thanks in advance

Why Does Dynamic Link Not Work

I purchased the CS5 Adobe Production Premium. I have been working in Premiere and I have been learning about how to use Dynamic Link. I want to be able to alter clips in After Effects and bring them back and forth into Premiere. When I go to File/ Adobe Dynamic Link/New After Effect Composition, I get this message:
Adobe Dynamic Link Requires Adobe Production Premium.
Since I own production premium, I do not know why I am getting this message. I have reinstalled the CS5 Production Premium Software twice and it still gives me the same message. What can I do to get Dynamic Link Working.

Thank you for the tip. Could you possibly tell me how to deactivate and
then reactivate the suite. I am using a Macbook Pro laptop running OS
10.6.4. I do not even know where to start.
From:   Colin Brougham <[email protected]>
To:     Dan Seanor <[email protected]>
Date:   03/15/2011 09:55 AM
Subject:        Why Does Dynamic Link Not Work
Deactivate the software (not uninstall), and then reactivate the suite.
This often fixes this. You can opt to leave the serial number on the
system; no need to clear it and re-enter it.

RH 8 Shed images not working

1. Shed images not working as of Nov. 12 2009

Hi all
Thanks for all the info - but I'm still stumped. I have tried generating my .chm
files to the default SSL folders, manually copying all the child chms to the SSL
folder for the master project, letting RH copy them, generating all chms to an
external folder... no matter what I do, every time I recompile the master
project it picks up random old stuff. I have checked and rechecked that my
merged TOC items are to the latest child chms...
Sometimes when I recomplie the master project, even the content in that reverts
back to a previous version, sometimes it doesn't...
I have looked at the Merged Files list in the hhp file, I have deleted this file
and started my merge from scratch, I have manually deleted some paths (some
paths are to directories on the server where any files for this project have
long since been deleted...) directly in this file, but again every time I
recompile the master project it picks up random old versions of the child chms (
and the huge list of old merged files are put back in the hhp file. Even when I
delete all chms from all locations in the folder I'm working in on my C drive,
delete all the merged TOC items from the master project, save it, and
recompile it, the list of old merged files reappears in the hhp file).
Any more thoughts gratefully received:-)
Also - I don't have a Baggage Files folder??
One more thing... If I delete ALL the files under Merged Files in the hhp file using HTML Help Workshop, it crashes

Adobe download assistant will not work on my machine?

Adobe download assistant will not work on my machine. When i try to start it i get a message saying "Sorry an error has occurred. This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance." Any ideas what to do

Are you using Mac OS? If so please try removing the Adobe Download Assistant from your Applications folder and try again. This issue is documented in the Known Issues section of Troubleshoot Adobe Download Assistant - http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html.

Minetest translation does not work on my machine.

Hey there.
After trying my luck in the official Minetest forums a week ago and got nothing more than the initial “try this-and-that” thing as response in the German discussion section and no reply at all in the regular discussion section I decided to ask on Reddit on last Saturday afternoon, too. On Reddit my question only got 3 upvotes and no comments.
Since no-one seems to know what’s going on I decided to post my question here, too.
It sems like the translation feature in Minetest does not work on my machine for unknown reason.
The language files are there and according to it’s oputput and the PKGBUILD Minetest was compiled with gettext support. LANG and LC_MESSAGES are properly set (I even tried LC_ALL). Localization works properly in all other applications that support localization.
Here’s some relevant system information.
$ uname -rms
Linux 3.16.1-1-ARCH x86_64
$ minetest --version
Minetest 0.4.10
Using Irrlicht 1.8.1
Build info: VER=0.4.10 BUILD_TYPE=Release RUN_IN_PLACE=0 USE_GETTEXT=1 USE_SOUND=1 USE_CURL=1 USE_FREETYPE=1 USE_LUAJIT=0 STATIC_SHAREDIR=/usr/share/minetest
$ pacman -Ql minetest | grep locale/de
minetest /usr/share/locale/de/
minetest /usr/share/locale/de/LC_MESSAGES/
minetest /usr/share/locale/de/LC_MESSAGES/minetest.mo
$ locale
LANG=de_DE.utf8
LC_CTYPE="de_DE.utf8"
LC_NUMERIC="de_DE.utf8"
LC_TIME="de_DE.utf8"
LC_COLLATE="de_DE.utf8"
LC_MONETARY="de_DE.utf8"
LC_MESSAGES="de_DE.utf8"
LC_PAPER="de_DE.utf8"
LC_NAME="de_DE.utf8"
LC_ADDRESS="de_DE.utf8"
LC_TELEPHONE="de_DE.utf8"
LC_MEASUREMENT="de_DE.utf8"
LC_IDENTIFICATION="de_DE.utf8"
LC_ALL=de_DE.utf8
$ cat /etc/locale.gen
de_DE.UTF-8 UTF-8
en_DK.UTF-8 UTF-8
en_US.UTF-8 UTF-8
According to the discussion in the German discussion section in the Minetest forums I tried to set language = DE (and variants like de_DE with or without .utf8 in all possible variants) in minetest.conf but it didn’t change anything. Also: Here’s the output of running Minetest with --verbose parameter.
16:47:01: INFO[main]: Using system-wide paths (NOT RUN_IN_PLACE)
16:47:01: INFO[main]: path_share = /usr/share/minetest
16:47:01: INFO[main]: path_user = /home/dirk/.minetest
16:47:01: INFO[main]: minetest with SER_FMT_VER_HIGHEST_READ=26, VER=0.4.10 BUILD_TYPE=Release RUN_IN_PLACE=0 USE_GETTEXT=1 USE_SOUND=1 USE_CURL=1 USE_FREETYPE=1 USE_LUAJIT=0 STATIC_SHAREDIR=/usr/share/minetest
16:47:01: INFO[main]: logfile = /home/dirk/.minetest/debug.txt
16:47:01: VERBOSE[main]: httpfetch_init: parallel_limit=8
16:47:01: INFO[main]: Message locale is now set to: LC_CTYPE=de_DE.utf8;LC_NUMERIC=C;LC_TIME=en_DK.utf8;LC_COLLATE=de_DE.utf8;LC_MONETARY=de_DE.utf8;LC_MESSAGES=de_DE.utf8;LC_PAPER=de_DE.utf8;LC_NAME=de_DE.utf8;LC_ADDRESS=de_DE.utf8;LC_TELEPHONE=de_DE.utf8;LC_MEASUREMENT=de_DE.utf8;LC_IDENTIFICATION=de_DE.utf8
Irrlicht log: Irrlicht Engine version 1.8.1
Irrlicht log: Linux 3.16.1-1-ARCH #1 SMP PREEMPT Thu Aug 14 07:40:19 CEST 2014 x86_64
Irrlicht log: Using renderer: OpenGL 3.3.0
Irrlicht log: GeForce 9600 GT/PCIe/SSE2: NVIDIA Corporation
Irrlicht log: OpenGL driver version is 1.2 or better.
Irrlicht log: GLSL version: 3.3
16:47:01: INFO[main]: text_height=22
16:47:01: INFO[main]: Searching worlds...
16:47:01: INFO[main]: In /home/dirk/.minetest/worlds:
16:47:01: INFO[main]: Spielwelt
16:47:01: INFO[main]: 1 found.
16:47:01: INFO[main]: Waiting for other menus
16:47:01: INFO[main]: Waited for other menus
16:47:01: INFO[main]: Audio: Initializing...
16:47:01: INFO[main]: Audio: Vorbis extension NOT present
16:47:01: INFO[main]: Audio: Initialized: OpenAL 1.1 ALSOFT 1.16.0, using OpenAL Soft
16:47:01: INFO[main]: GUIEngine: Initializing Lua
16:47:01: VERBOSE[AsyncWorkerThread_0]: Loading and running script from /usr/share/minetest/builtin/init.lua
16:47:01: INFO[AsyncWorkerThread_0]: Initializing Asynchronous environment
16:47:01: VERBOSE[AsyncWorkerThread_1]: Loading and running script from /usr/share/minetest/builtin/init.lua
16:47:01: INFO[AsyncWorkerThread_1]: Initializing Asynchronous environment
16:47:01: VERBOSE[AsyncWorkerThread_2]: Loading and running script from /usr/share/minetest/builtin/init.lua
16:47:01: INFO[main]: SCRIPTAPI: Initialized main menu modules
16:47:01: VERBOSE[main]: Loading and running script from /usr/share/minetest/builtin/init.lua
16:47:01: INFO[AsyncWorkerThread_2]: Initializing Asynchronous environment
16:47:01: VERBOSE[AsyncWorkerThread_3]: Loading and running script from /usr/share/minetest/builtin/init.lua
16:47:01: INFO[AsyncWorkerThread_3]: Initializing Asynchronous environment
16:47:01: INFO[main]: Searching worlds...
16:47:01: INFO[main]: In /home/dirk/.minetest/worlds:
16:47:01: INFO[main]: Spielwelt
16:47:01: INFO[main]: 1 found.
16:47:01: VERBOSE[main]: OpenALSoundManager::maintain(): 0 playing sounds, 0 sound names loaded
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.0.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.1.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.2.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.3.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.4.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.5.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.6.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.7.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.8.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.9.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.0.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.1.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.2.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.3.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.4.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.5.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.6.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.7.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.8.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.9.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.ogg for decoding
16:47:01: INFO[main]: OpenALSoundManager: "main_menu" not found.
16:47:05: INFO[main]: Audio: Deinitializing...
16:47:05: INFO[main]: Audio: Deinitialized.
16:47:05: INFO[main]: GUIEngine: Deinitializing scripting
16:47:05: INFO[main]: Searching worlds...
16:47:05: INFO[main]: In /home/dirk/.minetest/worlds:
16:47:05: INFO[main]: Spielwelt
16:47:05: INFO[main]: 1 found.
16:47:05: INFO[main]: Updating configuration file: "/home/dirk/.minetest/minetest.conf"
16:47:05: INFO[main]: Skipping writing of /home/dirk/.minetest/minetest.conf because content wouldn't be modified
16:47:05: INFO[main]: Updating configuration file: "/home/dirk/.minetest/minetest.conf"
16:47:05: INFO[main]: Skipping writing of /home/dirk/.minetest/minetest.conf because content wouldn't be modified
16:47:05: VERBOSE[main]: httpfetch_cleanup: cleaning up
… or on nopaste.info for better readability.
Since it seems to work for everyone else (otherwise there might be more replies to my quesions in several places, I guess *g*) I’m pretty sure that’s a local problem on my machine. But since gettext properly works on my machine in all and every application that use it I have no clue at all where to start debugging.
Hints are highly appreciated Thanks in advance!
Kind regards,
Dirk

Hi there...
It gives me a URL that begins with http:// Safari does something strange, ie. flashes the page, and then complains about not recognizing photo://
It seems that it has not figured out that it needs to open iPhoto 6.
Regardless, the provided link is not viewable when cutting and pasting into safari, neither.
I am using the latest and greatest 10.4.4, Safari is 2.0.3.

OSS note is not working in production but works correctly in test system .

hello friends ,
weh have implemented one OSS notes , which is working corectly in Test system , but not working in production .
Could you please let me know , what could be the reason ?
OSS note no 1064273-
Regards,
Manoj

Pls. check with Basis if the OSS note has been implemented properly and successfully.

SWL_SUBSTITUTION_DEFINE does not work in production

hi guys,
we have tested to set substitution in qas using FM SWL_SUBSTITUTION_DEFINE and it work. Somehow it does not work in production ? we have checked and set the same setting as if in qas but still user is not able to see the PR in her inbox. pls help

>The assigned agent is meant for classification of SOT
I am not sure that you mean by this? Is there a classification called SOT defined in the system, and the task has been assigned to this classification? If yes, then you need to check the substitution that it is active for this type of tasks (or that it is active for "all" tasks). You should be able to see this also in the sbustitution table (I mean the type of substitution).
Or do you mean that there is some authorisation role called "SOT" in the system, and the possible agents of this task are the users having this role? Then you should be able to see all the users in PFTC under the task.
Regards,
Karri
PS. Remember also to execute transaction SWU_OBUF to refresh the buffers. Maybe it is some strange buffer problem...

Push notifications not working with production (apnagent nodes Js)

Hi,
When we tested the push notification in sandbox using apnagent node JS it worked well. But when we switch the sandbox to production it is not working. When we debug the server side we are not getting any errors also in production, but push notifications are delivered to the devices.
First we thought it is a certificate issues and then revoked all the certificates in the portal and created new certificates still no luck.
Can any one tell me why push notifications are not working in production.
Thanks in advance!

You're welcome. The request has been sent in. I first saw your post in the Using Apple Support Communities Forum, now I see it's been moved to the iPod Forum, hopefully it will get moved again.
iIt's been moved.

Functions (back & stop ) are not working in production environment

Hi All ...
Some functions (back and stop) are not working in production environment, where as those functions are working in QA testing environement..please answer.. what could be the reasons for not working some functions
in production environement.
Regards,,
Krishna

Hi,
Based on the error message, it is related to the item in your production environment, then the workflow will occur exception.
As your workflow worked perfectly in your other environments, I suggest you can check if some item has is valid in the document library.
You can try to use Fiddler to track the web request and find in which item the workflow occurs exception.
Here are some detailed articles for your reference:
https://msdn.microsoft.com/en-us/library/vstudio/ee231573(v=vs.100).aspx
http://www.andrewconnell.com/blog/SP2013-Workflow-Advanced-Workflow-Debugging-with-Fiddler
Thanks
Best Regards
Jerry Guo
TechNet Community Support

Bah! Publishing or "test movie" do not work on new machine

Bah! Publishing or "test movie" do not work on new machine. I
repaired all permissions, saved as different file names, and I
still get a "Be sure destination file is not locked..." This even
happens on Adobe's sample files! Fresh install (CS 4), fresh
operating system, new iMac. Thank you for your help, guys and
gals.

Nevermind, I got it. I had to change the publishing directory
to a different one.

Dynamic Picture/Image Not Working

CR XI R1 - I believe it is the most recet service pack available (4?)
VBScript is being used to query the database and provide the recordset data to the crystal report via a data definition file. All other data displays properly on the report.
The 'placeholder' image is one that says 'image not found'. It "should" be getting replaced at runtime with the dynamic image specified in the graphic location formula but it is not and the image always remains the same.
In the graphics location I have tried in multiple ways to enter a path with a http:// reference, a file:// reference, a local drive C: reference, and a reference relative to the report's current directory on the server.
Nothing seems to work.
Could someone help me understand the requirements of the graphics location field in crystal reports in order for it to dynamically locate the file at run time.?
My current assumption is that the graphics location requires a path in text form (surrounded in quotes) to an image file to be returned. I also am assuming it doesn't matter when the graphics location field evaluates itself relative to other fields/formulas - especially if the path is static.
I should note that a static path entered and print previewed does switch the picture.

Please disregard. I believe I have solved the issue. The crystal reports viewer on the server was version 9, not 11. Changing it to 11 appears to have resolved the issue.

Dynamic URL not working in email

I have a question on dynamic URL. In my report I have a help image which has hyperlink (when you click on the image which will take you to a help PDF file on the SharePoint) . This hyperlink is working fine in the browser but when I email the report
my Hyperlink is not working as there will be no server name to dynamically pick up in the email. I am using Java Script can any one tell me how can I make my dynamic hyperlink work in the email without hardcoding the URL.
My current URL:
=”javascript:void(window.open(‘http://’+window.location.hostname+%20′/Library/Reports/Report%20Test.pdf’,'popup’,'target=_blank,resizable=1,toolbar=0,menubar=0,location=0′))”
Thanks in advance.

Hi Ranjith,
Based on my test, javascript URL cannot work when we email report use MHTML format. However, it is fine when we view the email in a web browser. If we are use original URL, it is work fine no matter which format we are use. Please try to use original URL
in the report to check if the issue is persist.
If the issue is persist, please clarify the render format of the subscription. It is benefit for us to do further analysis.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Google Images not working in Safari on Iphone

Since a while back the "images"-tab in google does'nt work on the iPhone in any of the browsers I've tried. I've searched the net to find others with the same problem but with little luck. Here's a description of the problem.
For example I search for "dog" in google in the Safari browser, this works just fine.
Then I press the "images"-tab and get a thumbnail view with pictures of dogs, of course.
But this is where it all goes wrong, when touching one of the images I get an enlarged view of an image next to it. The "back to the results" and "full image" buttons dim out (without being touchable) and swiping does not work. I don't know what has caused this to stop working properly, I know its not the new iOS version though.
HERE is a youtube video I prepared that explains the problem.
First, is there anyone else out there with this problem?
Second, this is what I've tried:
- Other iPhone web browser applications, for example "Mercury", "Opera Mini", "Skyfire" and none of them works except "Dolphin" (good work).
- Resetting any of the settings in the phone, clearing cache and such have no effect.
- Resetting the iPhone totally, factory settings. No effect.
- Using someone elses iPhone. I've tried on an iPhone 4 and iPhone 3S, same problems (with iOS 5.01).
- Trying out all of the settings in google, no change.
- Setting the google view to "classic" instead of "mobile" works of course, but that makes the site look just like on a PC or Mac and is not what I'm after.
Third, this problem seems to just affect Swedish users from what I can tell. There would be thousands of posts about this if everyone in the world was affected by it, but so far I've seen no posts on this matter. But after searching a while I found a swedish forum site on the subject. Link (in swedish). Also, when visiting google from Sweden some form of script automatically changes the url from .com to .se. I don't know if this has something to do with it?
Anyone know what causes this problem and how It might be resolved?
Best Regard
Stefan, Sweden

Hi Stefan,
First; this must be the most thorough error discription I have ever seen. Impressive.
Second; yep for a couple of weeks now I've been having exactly the same problems as you describe. One other thing that I've noticed, is that for me, the 'word suggestion drop down list' or whatever it's name is, no longer works. More specificly:
I open Safari in my iPhone, surf to Google image search and type for example "dog" in the search field. Below the field, I now get a list of suggested words or phrases that I think is based on the most popular searches. For me, the first suggestion in this list is "dogo argentino" (a specific and popular breed of dogs). When I tap on the words "dogo argentino", the search field normally would switch input from "dog" to "dogo argentino" AND starts the image search automatically. However, since the problem showed up, when I tap on "dogo argentino" the input field is not affected (still reads "dog") and I would have to type "dogo argentino" manually and hit "search".
I use a Swedish iPhone 4S (5.0.1 (9A406)) in the Telenor network. I also have tested the same possible solutions that you describe in your post, but with no luck.
All the best,
Ingo

Dynamic configuration not working in Java mapping

Hi All,
I have a scenario where i am using java mapping. In this i am doing following
1)Read file name from input message header
2)set file name in output message Header
3) set Directory name in output message Header
i have used following code .. but iit is not working... when i test end to end... in reciver communication channel it is failing stating " message failed as "Directory is not set in Header. Also i checked in SXMB_MONI "dynamic configuration".It is not showing Directory.
this is code.
public void transform(TransformationInput transformationInput,TransformationOutput transformationOutput)
               throws StreamTransformationException {
               private Map para;
               String Directory ;
               String inputFileName;
               String var1 = "ABC";
               para = transformationInput.getInputHeader().getAll();
               DynamicConfiguration conf = (DynamicConfiguration) para
                         .get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
               DynamicConfigurationKey keyFileName1 = DynamicConfigurationKey
               .create("http://sap.com/xi/XI/System/File", "FileName");
                     inputFileName = conf.get(keyFileName1);
               DynamicConfigurationKey keyFilename = DynamicConfigurationKey
                         .create("http://sap.com/xi/XI/System/File", "FileName");
               DynamicConfigurationKey keyDirecory = DynamicConfigurationKey
                         .create("http://sap.com/xi/XI/System/File", "Directory");
               Directory = "tmp/"+var1;
               conf.put(keyFilename,inputFileName);
               conf.put(keyDirecory, Directory);
I am in PI 7.1 ,   and in eclipse its showing warning that Para is not used.
Can anyone show some lights.
Also is there any way to debug this?? like is there any function by which i can write the trace for each step to see those in MONI.

Method name:   public void createDirectory(Resultlist result, Container container)throws StreamTransformationException
//Use Simple UDF and do the following lines
String Directory ;
String inputFileName;
String var1 = "ABC";
DynamicConfiguration conf = container
    .getTransformationParameters()
    .get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey keyFileName1 = DynamicConfigurationKey
               .create("http://sap.com/xi/XI/System/File", "FileName");
inputFileName = conf.get(keyFileName1);
DynamicConfigurationKey keyFilename = DynamicConfigurationKey
               .create("http://sap.com/xi/XI/System/File", "FileName");
DynamicConfigurationKey keyDirecory = DynamicConfigurationKey
               .create("http://sap.com/xi/XI/System/File", "Directory");
Directory = "tmp/"+var1;
conf.put(keyFilename,inputFileName);
conf.put(keyDirecory, Directory);
and remove these 3 lines
//private Map para;
//para = transformationInput.getInputHeader().getAll();
//DynamicConfiguration conf = (DynamicConfiguration) para.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION
>>I am in PI 7.1 , and in eclipse its showing warning that Para is not used.Can anyone show some lights.
You can simply remove declaring Map Para line... The eclipse gives warning because you dont assign values for it and you are trying to use...
For using the same input file name in output side, you dont need coding ... you need only for the directory...
Enable ASMA attributes in the channel.
Edited by: Baskar Gopal on Feb 24, 2011 10:58 AM

CR XI R2 - Dynamic Images not working on production machine

Similar Messages

Maybe you are looking for