Cracked my macbook glass , lcd works fine , wont be able to change it till 2 months after which i get home, is it ok to use it with a cracked screen?

Help!

The usual repair for your situation is a replacement of the entire display thus if you are careful, continued use will be acceptable.  You essentially cannot do any additional harm
Ciao.

Similar Messages

  • Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB hard drive and only 120GB Macbook. It worked fine before the latest Maverick's

    Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB external hard drive and only 120GB Macbook. It worked fine before the latest Maverick's update. Any help would be greatly appreciated.

    My guess would be it has created an entirely new backup of your drive when you upgraded to Mavericks.
    See Here: http://pondini.org/TM/1.html
    And here: http://pondini.org/TM/9.html
    Peruse the whole site. There is a lot of information there.

  • Keyboard plugs into the back of my display does not work? but when I plug the keyboard into my MacBook Pro it works fine? is it my display Monitor?

    My keyboard plugs into the back of my display monitor it does not work? but when I plug the keyboard into my MacBook Pro it works fine? is it my display Monitor?

    Try:
    - Resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Resetting network settings: Setting>General>Reset>Reset Network Settings

  • Macbook to TV, Works fine until I put the Macbook to sleep then tv display

    Macbook to TV, Works fine until I put the Macbook to sleep,
    I wake the Macbook with external keyboard and the display shows up on TV just fine for a second or two then it looks like something changes and then it starts rolling.
    It does not do this when Macbook is awake it only does it after it's put to sleep.

    Probably the resolution is switching from a mirrored resolution to some other resolution that the TV can't work from. Try this; shut down the MacBook. Cable up the TV to the MB and also the external keyboard and mouse. Hold down the Shift key on the external keyboard, hit the start button on the MacBook and immediately close the lid on the MB after you've hit the start button. Continue holding the Shift key down on the external keyboard until you see the grey screen with the spinning gear at which time you can release the Shift key. The MB should now finish starting up in Safe mode with only the external screen being on. Hopefully the screen will not be rolling.
    Once the MB finishes booting, go into System Preferences/Displays and set the resolution to the optimal/desired resolution for your TV. Hopefully this choice will stick through subsequent restarts and also correct the issue of the rolling screen under the conditions in the scenario you described.

  • My iphone 4 wont connect to my wifi, it usualy works fine, when i go to settings it says its connected but on the home screen it still says 3g and is running at 3g speeds still, please help :)

    my iphone 4 wont connect to my wifi, it usualy works fine, when i go to settings it says its connected but on the home screen it still says 3g and is running at 3g speeds still? please help

    http://support.apple.com/kb/ts1398

  • After upgrading to 10.7.2, my iMac works fine for 40-50 minutes, then slows to a crawl.  Restart gets back to normal, then 40 minutes later need to restart again.  Thought about reinstalling Lion through Lion Recovery, but says my hard disk is locked?

    After upgrading to 10.7.2, my iMac works fine for 40-50 minutes, then slows to a crawl.  Restart gets back to normal, then 40 minutes later need to restart again.  Thought about reinstalling Lion through Lion Recovery, but won't let me, says my hard disk is locked?  Any suggestions?

    Launch the Terminal app in /Utilities/, run these two commands (copy & paste each one separately and hit the return key):
    sudo chflags 0 /volumes/*
    sudo chmod a+rx /volumes/*
    at the Password: prompt, type in your admin password, carefully since nothing displays on the screen, and hit the return key. These should unlock your drives. You might have to restart.

  • My iPhone 4s has suddenly stopped making a noise to tell me new emails have arrived, this was after an ugrade to IOS 7.1.2. It worked fine before and I didnt change anything but it just stopped dinging. I have checked Settings-Sounds

    My iPhone 4s has suddenly stopped making a noise to tell me new emails have arrived, this was after an ugrade to IOS 7.1.2.
    It worked fine before and I didnt change anything but it just stopped dinging when I got a new email.
    I have checked Settings-Sounds & Settings-Notification Centre and everything looks fine.
    It worked ok a couple of weeks ago but not after the latest update - anyone know why?

    Thanks Lawrence
    I omitted to say that it only occurs when the screen is locked - if I'm looking at something on my phone when an sms or email arrives, the phone 'notifies' me with a sound but doesnt do it when its screen is locked. Email messages and sms's (texts) still arrive but I get no sound to tell me they have.
    The MUTE swith is in the correct place and I have tried resetting the phone with the Home and Sleep buttons several times, still to no avail.
    I have noticed on the forums that many people are suffering or have suffered the same problem but Apple are never forthcoming, of course,

  • Mail worked fine for 2 days on Lion and now I've restarted and get spinning ball.  Can't access my mail.  At all. Osx 10.7.1 2.26 Ghz Macpro

    Mail worked fine for 2 days on Lion and now I've restarted and get spinning ball.  Can't access my mail.  At all. Osx 10.7.1 2.26 Ghz Macpro

    The settings seems to be correct...As you were able to ping the ip 192.168.1.2,it should open the setup page..Try to disable the firewall,ant-virus and other security software if any and then,try...Also try to adjust the browser settings on the computer... Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...Now try..
    It should work now...If not then,you have to reset the router and need to reconfigure it again..

  • Note 3 won't answer a call by using the "answer" voice command. Other voice commands work fine (ie 'volume up') and speech to text works fine. Tried it in the car and in a quiet room at home. What am I missing?

    Note 3 won't answer a call by using the "answer" voice command. Other voice commands work fine (ie 'volume up') and speech to text works fine. Tried it in the car and in a quiet room at home. What am I missing?

        Rodilator,
    We'll figure this out together! Can you please walk us through the exact steps you're taking to answer a call when it comes in?
    SarahO_VZW
    Follow us on Twitter @VZWSupport

  • HT4759 After I add a new PC to synchronize Outlook contacts and calendar with icloud, another PC/Outlook stops synchronizing that had been working fine.  Does anyone know why this happens repeatedly?  Is there a limit to the # of PCs that synchronize with

    After I add a new PC to synchronize Outlook contacts and calendar with icloud, another PC/Outlook stops synchronizing that had been working fine.  Does anyone know why this happens repeatedly?  Is there a limit to the # of PCs that synchronize with iCloud

    Not possible.

  • My macbook air was working fine until all of a sudden it froze.

    I have a macbook air and everything was working fine until all of a sudden my computer froze.  I then rebooted my computer by press & hold down the power key because it would not allow me to open or close any programs.  After i rebooted it, the keyboard & touchpad won't work. i could'nt login to my computer because all the buttons on the keyboard seems to be not responding, only the power button is working.  i am also not able to move the arrow around. i think the touchpad too is not responding. really appreciate it if anyone would share any feedbacks.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Mail App won't Send Mail on Macbook Air, Outlook works fine

    Mail app will no longer send, from my new 2011 Macbook Air with Lion. The MS Outlook app sends fine.

    This was the answer:
    This happened to me after updating to Lion. This is what I did.
    When mail tries sending/receiving you'll see the spinning icon next to the trays on the left hand side. Whilst this is happening click onwindow>Connection Doctor. Find the offending account, red dot, double click on the account and in the window that opens check the details inAccount Information and Advanced are correct; mine weren't and when I corrceted them, all was well. These details semed to be different to those I had set in the Preferences pane of mail.
    Good luck,
    Andy
    what this does is guide you through editing the smtp port list, which is a bit hard to locate on the accounts screen.
    mail cycles through the possible smtp ports, which can take a VERY long time. Usually 587 is what you want, but in any case, pick one, see if it works, tell it not to cycle.

  • No Midi In or Out from Logic Pro on MacBook Pro. Worked fine on my G5...

    Hi, I've recently bought a Macbook Pro (Unibody) to replace my old G5. I've reinstalled Logic Pro 7 and the Midi drivers for my MIDISPORT 4x4.
    The Midisport active LED pulses as it should when idle, and the LEDS on the MIDISPORT flash when receiving MIDI in but I can't hear anything in Logic. Logic has also stopped transmitting MIDI out. So as it is I can't play any virtual instruments on the Mac, nor can I even play my hardware gear, there is just nothing!
    I've checked and rechecked the settings but no luck. It all worked fine on the G5.
    This is really frustrating as I need the Mac to do some live gigs and at the moment I've got a £900 paperweight. Any advice gratefully received.

    Have you reinstalled the drivers on your Macbook?
    http://www.m-audio.com/index.php?do=support&tab=driver&PID=a4fc99df673e54ff97ce3 99bbbfdef71&serie_ID=4#tabs
    Oh yeah, scrap that, it says you did.
    Also are you trying to power it from the laptop, if it has an ac adapter port, you may need to plug that in too, it might not be getting enough power from the laptop.
    Actually scrap that too, I've just had a look it's solely USB
    Message was edited by: bill borez
    Message was edited by: bill borez
    Message was edited by: bill borez

  • My Macbook Pro is working fine, but keeps making 3 short beeps

    My MBP has started making 3 short beeps every minute or so.
    It appears to be working fine, however.
    I rebooted it, and ran both the short and long diagnostics, neither of which found any problems.
    What do I need to do?

    OK, I've resolved this, and its a real dinger.
    I logged out of my MBP and logged in again as another user, and there was no beeping, so I determined it wasn't hardware related.
    I logged back in as myself and disabled all startup applications, but there was still beeping.
    I looked at my system log again, and noticed that there was lots of lines like this:
    May  2 15:29:10 Garreths-MacBook-Pro.local coreaudiod[1414]: Disabled automatic stack shots because audio IO is active
    which was happening at exactly the same time as the beeps.
    I started playing around with audio, and noticed that when I killed the coreaudiod daemon, Chrome crashed. This led me to think that maybe this was something to do with a Flash update, so I started poking around in Flash to find a disable option.
    While looking, I noticed a Chrome extension call "Sleep for Gmail". I disabled this, and the beeping stopped. I looked in its setting, and it has an option to play a Notification Sound. Piece of sht software just plays a quad-beep and doesn't pop-up an alert, so you have no idea what the beep means! Arrrgghhh!
    Anyway for other, the Apple hardware warning beeps are dull pronounced beeps with a distinctive space between each beep so you can count them.
    What I heard was a sort of rapid pager type beep. If you here something similar, its probably software related and not hardware related.

  • Everytime I get on a video chat i can here the person very well but they can't here me what can I do to fix this I have droped my iPod in water and also droped it and cracked it but it still works fine what should i do. Please respond ASAP!!!!!!!!

    Everytime I get on a video chat  I can here the person I'm chating with but they can't here me at all . Now I have droped it in water and my ceral and I have droped it in the street . But it's still working fine but running a little slow too. What can i do resond ASAP!!!!!!!!!

    Have you tried here:
    iOS: Not responding or does not turn on
    You can check your warranty coverage by entering the SN here:
    Apple - Support - Check Your Service and Support Coverage
    For how to get warranty work see:
    Apple - Support - iPod - Service FAQ
    The fastest is to make an appointment at the Genius Bar of an Apple store.

Maybe you are looking for

  • Mini DVI to HDMI Cable problems

    So I bought the mini dvi to HDMI adapter off of Amazon so that I could connect my Macbook to my HDTV. I have seen other posts that said that this cable works but when I tried to connect my computer to my TV nothing came up. I tried restarting it and

  • Ipod shuffle won't show up on 2nd computer

    Please help..... I want to play my Ipod shuffle on another computer. I don't need to download any music from or to the 2nd computer, I just want to play the shuffle's content on it(in Itunes). When I plug in the usb, the device charges, but it does n

  • Thumbnails won't appear on a site. I just upgraded.

    When I was on Beta with 2.2 I had this same problem, you helped me before, but it was so confusing. I told the web owner he needed to adjust his script for 2.2 What can I do in the meantime? I can add a screenshot if I need to.

  • Content Item

    Is there a way to retrieve an item from the content server using the server API?  I know it can be done in the remote client but I don't have access to the request/response.

  • Integration points between SD and PP

    Can some one explain the integration points betwwen Sd and PP. Related materials would be very help plz thanks