Crash when calling dlll built by LV using timed loop.
I have built a dll with Labview 7.1. Then I use VC++ 6.0 to call this dll. Everything is fine except that it will crash after the whole program finishes. Without timed loop the program can exit normally. When built to exe file, it can also run normally. This happens in both Windows2000 and Windows XP.
Anyone knows the reason for this?
Thanks!
Now the timed loop stops correctly everytime both in Labview environment and standalone exe. But when I call the dll version from C. The c program has no response after the program finishes.
I built another small vi without timed loop to dll and called it. The c program exit normally. What is the problem?
The period of timed loop is 50ms. Is it too short? I found from other post that maybe I should use while loop instead of timed loop. But i need very accurate controling of time.
Any suggestions?
Thanks!
Similar Messages
-
Application crashes when calling DLL built with LabVIEW 2011
Hello everybody,
Our application calls DLLs built with LabVIEW 2010 SP1. We installed LabVIEW 2011 and built some DLLs. So far so good. If we start our application and run 2010 DLLs it still works fine. If we run a 2011 DLL just once no error happens, but if we try to run the same 2011 DLL our application crashes reporting the error below. I saved the code for 2010 version and built a DLL and it works fine. Does anyone know why?
Thank you in advance.
#Date: Fr, 16. Sep 2011 16:25:25
#OSName: Microsoft Windows XP Service Pack 3
#OSVers: 5.1
#OSBuild: 2600
#AppName: PasTA
#Version: 11.0f2 32-bit
#AppKind: AppLib
#LabVIEW Base Address: 0x30000000
16.09.2011 16:25:26.181
Crash 0x0: Crash caught by NIER
File Unknown(0) : Crash: Crash caught by NIER
minidump id: 8a779b3f-51d7-4864-8e4d-6ab0195cd158
ExceptionCode: 0xC0000005
N
0x3072C804 - lvrt <unknown> + 0
0x3072CBB8 - lvrt <unknown> + 0
0x7C864191 - KERNEL32 <unknown> + 0
0x7C83AB50 - KERNEL32 <unknown> + 0
0x00000000 - PasTA <unknown> + 0
Attachments:
error.PNG 11 KBOn that note, you should be able to create DLLs in 2010 and run them with 2011, correct?? In my case, I have a 2010 built DLL (talking to sbRIO), most of the functions work when run in 2011, but a couple of them lock up LabVIEW on the desktop (but not the sbRIO), no lock ups happen with 2010 on the desktop.
-
I have read the thread about turning off dialpad sounds when calling a number. I used to always be able to do this on my 4S but not so since the latest software on the 5. Keyboard clicks are turned off and still have dialpad sound. I've NEVER had to mute to dial before.
I really do not think it is the iPad or your network connection. Other users have reported this very same issue. Try this and see if it works for you - it may not work - but it's easy to try - harmless - and it has worked in the past for others.
Try signing out of your account and restart your iPad.
Go to Settings>Store>Apple ID and tap the ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. Go back to Settings>Store> Apple ID and sign in again. -
VB6 applications crashes when calling C# dll's in production environment
Hi All,
I'm basically .NET developer, not much aware of VB language or VB visual Basic 6.0.
We are trying to work out with VB application running/ using C# dll's. The scenario is like VB exe applications using C# dll's and C# dll's are referenced to VB application using .tlb file.
In development environment(debug mode) the application looks fine and working as expected. But when the same code is put into production environment VB applications are crashing when pointing to C# method calls. We trying to know the reason but application
is getting killed. The issue seems to be sporadic and not able to catch in MsgView(debug tool).
In one more scenario, the VB application is loading C# form and getting data back to VB but when we repeat the same workflow again application is crashing either in 2nd attempt or 3rd attempt.
Has anybody seen such issue? Any input is welcomed.
Thanks,
SheshHi Shesh.ugare
Welcome to MSDN.
I am afraid that these forums donot support VB6, you could refer to this thread:
Where to post your VB 6 questions
If this issue regarding VB6 then you could consider posting this issue in these forums below:
These forums do not support Visual Basic 6, however there are many third-party support sites that do. If you have a VB6-related question please visit these popular forums:
VB Forums
VB City
If not, then you could share more detailed code with us.
Thanks for your understanding.
Regards.
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
VM crash when calling crystal report in java (Unix)
We experience a serious problem when try to develop a crystal report application that run at Sun Solaris 9. Our program is to export pdf from crystal report. The program will always got VM crash when open the crystal report (but it's not 100% happened, it will always happen when we second time open the same report). I got no problem when run my program in the windows XP or another unix machine of Solaris 8. The report path is correct, but don't know why it will crash when open the report. May anyone help on it?
Below see the system log:
Jul 8 09:32:05 prospero genunix: [ID 269049 kern.notice] NOTICE: java[23499] at
tempt to execute non-executable data at 0x0 by uid 65639
Jul 8 09:33:04 prospero genunix: [ID 269049 kern.notice] NOTICE: java[23720] at
tempt to execute non-executable data at 0x0 by uid 65639
Jul 8 09:36:07 prospero genunix: [ID 269049 kern.notice] NOTICE: java[24335] at
tempt to execute non-executable data at 0x0 by uid 65639
Below see the java coding and the VM crash message:
reportDocument = new ReportClientDocument();
reportDocument.open(mSummaryReportName, 0); <=== always crash here
String query = " SELECT BRCH_RPT_SUMM.NM_BRIEF_ACC, BRCH_RPT_SUMM.NM_PRAD, BRCH_RPT.DT_VAL_CURR, BRCH_RPT_SUMM.CD_ACC, BRCH_RPT_SUMM.NM_SHRT_ACC, BRCH_RPT_SUMM.IN_FUD_BRCH_WRN, BRCH_RPT_SUMM.CD_BTCH, BRCH_RPT_SUMM.ID_PRSN, BRCH_RPT_SUMM.CD_PRTR, BRCH_RPT_SUMM.IN_BRCH_SPRS " +
"FROM COMPLIANCE.BRCH_RPT BRCH_RPT INNER JOIN COMPLIANCE.BRCH_RPT_SUMM BRCH_RPT_SUMM ON ((BRCH_RPT.CD_BTCH=BRCH_RPT_SUMM.CD_BTCH) AND (BRCH_RPT.ID_PRSN=BRCH_RPT_SUMM.ID_PRSN)) AND (BRCH_RPT.CD_PRTR=BRCH_RPT_SUMM.CD_PRTR) " +
" WHERE BRCH_RPT_SUMM.IN_BRCH_SPRS='N' " +
"AND BRCH_RPT.cd_btch = '" + mBtchCd + "' " +
"and BRCH_RPT.cd_prtr = '" + mPrtrCd + "' " +
" and BRCH_RPT.id_prsn = " + mPrsnId;
Statement statement = mDb.getConnection().createStatement( ResultSet.TYPE_SCROLL_INSENSITIVE, ResultSet.CONCUR_READ_ONLY);
String tableAlias = reportDocument.getDatabaseController().getDatabase().getTables().getTable(0).getAlias();
ResultSet resultSet = statement.executeQuery(query);
reportDocument.getDatabaseController().setDataSource(resultSet, tableAlias , "resultsetTable");
byteArrayInputStream = (ByteArrayInputStream)reportDocument.getPrintOutputController().export(ReportExportFormat.PDF);
//Use the Java I/O libraries to write the exported content to the file system.
byteArray = new bytehttp://byteArrayInputStream.available();
//Create a new file that will contain the exported result.
file = new File(mReportExportPath);
fileOutputStream = new FileOutputStream(file);
byteArrayOutputStream = new ByteArrayOutputStream(byteArrayInputStream.available());
x = byteArrayInputStream.read(byteArray, 0, byteArrayInputStream.available());
byteArrayOutputStream.write(byteArray, 0, x);
byteArrayOutputStream.writeTo(fileOutputStream);
statement.close();
resultSet.close();
byteArrayInputStream.close();
byteArrayOutputStream.close();
fileOutputStream.close();
reportDocument.close();
An unexpected error has been detected by HotSpot Virtual Machine:
Internal Error (53484152454432554E54494D450E43505001A8 01), pid=28689, tid=1
Java VM: Java HotSpot(TM) Server VM (1.5.0_13-b05 mixed mode)
T H R E A D
Current thread (0x000386f0): JavaThread "main" threadin_Java, id=1
Stack: [0xffb7e000,0xffc00000), sp=0xffbfc690, free space=505k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
V http://libjvm.so+0x70c3c4
V http://libjvm.so+0x4383b4
V http://libjvm.so+0x2fbde0
V http://libjvm.so+0x274bf4
C http://libthread.so.1+0x15bb4
C http://libthread.so.1+0xf80c
C http://libthread.so.1+0xf9bc
j java.util.HashMap.removeEntryForKey(Ljava/lang/Object;)Ljava/util/HashMap$Entry;+119
j java.util.HashMap.remove(Ljava/lang/Object;)Ljava/lang/Object;+2
j com.crystaldecisions.reports.reportdefinition.kv.a(Lcom/crystaldecisions/reports/queryengine/af;Lcom/crystaldecisions/reports/queryengine/af;Z)V+135
j com.crystaldecisions.reports.reportdefinition.datainterface.g.a(Lcom/crystaldecisions/reports/queryengine/ch;Lcom/crystaldecisions/reports/queryengine/ch;ZZ)V+229
j com.crystaldecisions.reports.reportdefinition.datainterface.g.a(Lcom/crystaldecisions/reports/queryengine/ch;Lcom/crystaldecisions/reports/queryengine/ch;ZZLcom/crystaldecisions/reports/queryengine/b/w;)V+235
j com.crystaldecisions.reports.reportdefinition.datainterface.g.a(Ljava/lang/String;Ljava/lang/String;Ljava/util/Map;Ljava/lang/String;Lcom/crystaldecisions/reports/reportdefinition/datainterface/a;)V+682
j com.crystaldecisions.reports.dataengine.bj.new()V+24
j com.crystaldecisions.reports.common.as.a(Lcom/crystaldecisions/reports/common/af;)V+96
j com.crystaldecisions.reports.common.ae.a(Lcom/crystaldecisions/reports/common/l;)V+20
j com.businessobjects.reports.sdk.b.w.a(Lcom/crystaldecisions/reports/reportdefinition/bi;Ljava/lang/Object;Ljava/lang/String;Ljava/lang/String;)V+207
j com.businessobjects.reports.sdk.b.w.int(Lcom/crystaldecisions/sdk/occa/report/lib/PropertyBag;Ljava/lang/String;)V+231
j com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(IILjava/lang/String;Lcom/crystaldecisions/client/helper/ISecurityContext;Lcom/crystaldecisions/xml/serialization/IXMLSerializable;)Lcom/crystaldecisions/proxy/remoteagent/ResultInfo;+3326
j com.crystaldecisions.proxy.remoteagent.x.a(Lcom/crystaldecisions/client/helper/ISecurityContext;Ljava/lang/String;IILcom/crystaldecisions/xml/serialization/IXMLSerializable;Lcom/crystaldecisions/proxy/remoteagent/j;)Lcom/crystaldecisions/proxy/remoteagent/ResultInfo;+70
j com.crystaldecisions.proxy.remoteagent.q.a(IILcom/crystaldecisions/xml/serialization/IXMLSerializable;Lcom/crystaldecisions/proxy/remoteagent/j;)Lcom/crystaldecisions/proxy/remoteagent/ResultInfo;+83
j com.crystaldecisions.sdk.occa.report.application.dd.a(IILcom/crystaldecisions/xml/serialization/IXMLSerializable;)Lcom/crystaldecisions/proxy/remoteagent/ResultInfo;+44
j com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Ljava/lang/Object;Ljava/lang/String;Ljava/lang/String;Ljava/lang/Object;)V+284
j com.crystaldecisions.sdk.occa.report.application.DatabaseController.setDataSource(Ljava/sql/ResultSet;Ljava/lang/String;Ljava/lang/String;)V+5
j com.crystaldecisions.reports.sdk.DatabaseController.setDataSource(Ljava/sql/ResultSet;Ljava/lang/String;Ljava/lang/String;)V+7
j com.jpmorgan.awm.jfam.ptc.reporting.AnalysisExporter.exportReport()V+157
j com.jpmorgan.awm.jfam.ptc.reporting.EODReport.main([Ljava/lang/String;)V+744
v ~StubRoutines::call_stub
V http://libjvm.so+0x19b514
V http://libjvm.so+0x2dd44c
C java0x222c main0x1164According to the documentation for interpreting hotspot logs, the following can be determined from yours:
"An unexpected error has been detected by HotSpot Virtual Machine:
Internal Error (53484152454432554E54494D450E43505001A8 01), pid=28689, tid=1
Java VM: Java HotSpot(TM) Server VM (1.5.0_13-b05 mixed mode)"
When the HotSpot VM generates an internal error it is referring to a line of code in your application. The hexidecimal string is encoding the source module and line number where the error occurs.
"Current thread (0x000386f0): JavaThread "main" threadin_Java, id=1"
Essentially means that the JavaThread is running interpreted or compiled code when the error occurs.
The rest of the hotspot identifies what the thread has done up to this point.... even though to you it appears that it fails on the open method, it looks like it is actually failing after the setDataSource method call.
I would suggest that you look at other logs, ie: application server logs, Solaris message logs, database logs to see if you can identify where things actually fall apart. The first place to start would be the database connectivity because it appears that is the last thing that gets generated in the log file. -
Sun One Web Server 6.1 SP4 crashes when filters are built with CC ver. 5.6
Hi All
We are using NSAPI interfaces to develop the filter for Sun ONE 6.1 SP4 Web Server. Filter was working perfectly fine when it was built using Sun WorkShop 6.0, CC Compiler ver 5.2.
After we upgarded to Sun WorkShop 9.0, CC Compiler ver. 5.6, it no longer works. The web server crashes with Core. Please see the snippet below. There was however no change of code required for the upgrade.
Please let me know if some specific compiler/linker flags has to be used for building filters with CC Compiler ver. 5.6.
bash-2.03$ ./start
Sun ONE Web Server 6.1SP4 B01/20/2005 17:43
warning: CORE3283: stderr: 6950: CSemCounter created a semaphore with ID 25 using key 990470909.
warning: CORE3283: stderr: [10/Nov/2005:18:50:35] [Information] Agent
warning: CORE3283: stderr: Agent is enabled.
warning: CORE3283: stderr: 6950: Cache - created semaphore 26 using key 487154429
warning: CORE3283: stderr: 6950: ResourceCache - created semaphore 27 using key 772367101
warning: CORE3283: stderr: 6950: Cache - created semaphore 28 using key 503931645
warning: CORE3283: stderr: 6950: Cache - created semaphore 29 using key 520708861
info: CORE5076: Using [Java HotSpot(TM) Server VM, Version 1.4.2_04] from [Sun Microsystems Inc.]
catastrophe: CORE3260: Server crash detected (signal SIGBUS)
info: CORE3262: Crash occurred in function realloc from module /usr/lib/libc.so.1
Back Trace of Core
#0 0xfe042974 in t_splay () from /usr/lib/libc.so.1
(gdb) bt
#0 0xfe042974 in t_splay () from /usr/lib/libc.so.1
#1 0xfe0427e0 in t_delete () from /usr/lib/libc.so.1
#2 0xfe0423e4 in realfree () from /usr/lib/libc.so.1
#3 0xfe041f48 in mallocunlocked () from /usr/lib/libc.so.1
#4 0xfe041ce0 in malloc () from /usr/lib/libc.so.1
#5 0xfe04f568 in strdup () from /usr/lib/libc.so.1
#6 0xff1c3038 in INTsystem_strdup_perm ()
from /home/porting/project/sunone/bin/https/lib/libns-httpd40.so
#7 0xff1c84c8 in INTvs_get_doc_root ()
from /home/porting/project/sunone/bin/https/lib/libns-httpd40.so
#8 0xfdb57f4c in __1cKJ2EERunnerIcreateVS6FpkcpknNConfiguration_pnRJ2EEVirtualServer__i_ ()
from /home/porting/project/sunone/bin/https/lib/libj2eeplugin.so
#9 0xfdb528bc in j2ee_vs_create ()
from /home/porting/project/sunone/bin/https/lib/libj2eeplugin.so
#10 0xff1c9444 in __1cPNSAPIVSListenerGinitVS6MpnNVirtualServer_pk1_nIPRStatus__ () from /home/porting/project/sunone/bin/https/lib/libns-httpd40.so
#11 0xff2273e4 in __1cXVSConfigurationListenerQsetConfiguration6MpnNConfiguration_pk1_nIPRStatus__ ()
from /home/porting/project/sunone/bin/https/lib/libns-httpd40.so
#12 0xff225dc8 in __1cUConfigurationManagerQsetConfiguration6FpnNConfiguration__2_ () from /home/porting/project/sunone/bin/https/lib/libns-httpd40.so
#13 0xff245b30 in __1cJWebServerDRun6F_nIPRStatus__ ()
---Type <return> to continue, or q <return> to quit---
from /home/porting/project/sunone/bin/https/lib/libns-httpd40.so
#14 0x10ab8 in main ()
ThanksI could trace down the problem to the fact that if I don't use the map file (which is passed to the linker using -M mapfile), the plugin works perfectly fine. Further to this if I comment out the local part of the mapfile, it starts working.
mapfile :
NSAPIPlugin.so {
global:
symbol1;
symbol2;
symbol3;
# local:
Is there is any specific linker flag that I have to pass along with -M mapfile with the sun studio 9. What are possibe consequencies if I go ahead with this workaround of commenting out the local directive. -
Crash when calling Clipboard.GetContent() in Page Loaded event
Hello
I found a crash when using
Clipboard.GetContent() method ,
the steps to reproduce this are very simple:
-create C# Windows store application ,
-add loaded event for main page
-call Clipboard.GetContent() inside it(loaded event handler).
-run the application as release Ctrl+F5 , the application will crash , note that when you run as debug no problems
-this problem appears not on GetContent() only , it appears when you use any method of ClipBoard class indside main page loaded event.
Is this bug? , if yes , what is the workaround for this.Hi shaker,
Firstly, I have to say that, yes, I can reproduce your issue on my side.
However, as far as I know that the Clipboard operations are used to enable users to cut, copy, and paste data, but why you just call the Clipboard.GetContent() method in the Grid_Loaded event? Could you please show me more information
about your requirement so that I can better understand your scenario?
Thanks.
Vicky Song [MSFT]
MSDN Community Support | Feedback to us
Develop and promote your apps in Windows Store
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
Extproc crashes when calling external routine
Can anyone point me to documentation on the causes of extproc.exe crashing when trying to invoke an external procedure? The standard documentation set isn't too helpful for debugging such a problem.
I have been able to call one external procedure. With two others, I always get an extproc crash with (I believe) an access violation.
The routines I am trying to call are 3rd-party, so I do not have the ability to view their source, though I do have the list of parameters and the sizes and types.
What I am hoping to find somewhere is a list of the kinds of things that cause extproc to crash so I can see if any of them are likely culprits in my situation.
Thanks,
Bruce MerkleHave you tried calling into the dll that CVI calls directly from TestStand? I am curious to know if this also crashes.
I am also curious to know if there are any path references in the dll that is called by the CVI program. If so are they relative, or absolute paths?
I ask because one of the possibilities is that relative paths are being used to specify a path from the location of the code that is called, and they are not working because the current working directory is being specified by TestStand, and the paths are not relative to the working directory given by TestStand.
Jensen
National Instruments
Applications Engineer -
Firefox crashes when closing, also sometimes after extended use
As noted in the subject line of this message, Firefox has been crashing when I close it, and even sometimes (less regularly) in the middle of a session. I get the request to submit information to Mozilla, which I submit each time. The crash report signature is UserCallWinProcCheckWow. In order to try to fix the problem, I've searched for related topics on this forum, which has led me to open FF in safe mode (it didn't crash) and to disable all add-ons in normal mode (it still crashed when I shut it down). I also tried using the default theme but it still crashed. I'm on a laptop using Windows 7. I'm at a loss as to what to do next to fix this problem. Thank you for any ideas!
== Crash ID(s) ==
ID: 0ee14a83-a10d-4146-aa69-834332100511iGennie Tech guys can resolve nearly all of the crashing issues of Mozilla Firefox by restarting Mozilla Firefox in safe mode. Begin firefox in safe mode and try once more. If it works, it's absolutely an add-on.
It offers best computer support services.
We wish this information will help you.
for more information you must visit
'''http://www.igennie.net/mozilla-browser-support.html''' -
Photoshop CS6 (Mac) crashes when opening files with type or using the type tool
Hi,
Photoshop CS6 keeps crashing when using the type tool or when opening files with type on it. I've quit suitcase, disabled the suitcase plug-in, reset the preferences in Photoshop there's no crash report coming up either the application just dies! I am currently trying a system restore from time machine to see if that works!. Any other suggestions would be greatly appreciated.
Many thanks
Ollyhttp://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://helpx.adobe.com/photoshop/kb/troubleshoot-fonts-photoshop-cs5.html -
VM crash when calling crystal report in java
=======
REPOST
=======
We experience a serious problem when try to develop a crystal report application that run at Sun Solaris 10. Our program is to export pdf from crystal report. The program will always got VM crash when open the crystal report or export the crystal report (but it's not 100% happened, it will always happen when we second time open the same report). I got no problem when run my program in the windows XP. May anyone help on it?
Below see the coding and the VM crash message:
reportDocument = new ReportClientDocument();
reportDocument.open(mSummaryReportName, 0);
String query = " SELECT BRCH_RPT_SUMM.NM_BRIEF_ACC, BRCH_RPT_SUMM.NM_PRAD, BRCH_RPT.DT_VAL_CURR, BRCH_RPT_SUMM.CD_ACC, BRCH_RPT_SUMM.NM_SHRT_ACC, BRCH_RPT_SUMM.IN_FUD_BRCH_WRN, BRCH_RPT_SUMM.CD_BTCH, BRCH_RPT_SUMM.ID_PRSN, BRCH_RPT_SUMM.CD_PRTR, BRCH_RPT_SUMM.IN_BRCH_SPRS " +
"FROM COMPLIANCE.BRCH_RPT BRCH_RPT INNER JOIN COMPLIANCE.BRCH_RPT_SUMM BRCH_RPT_SUMM ON ((BRCH_RPT.CD_BTCH=BRCH_RPT_SUMM.CD_BTCH) AND (BRCH_RPT.ID_PRSN=BRCH_RPT_SUMM.ID_PRSN)) AND (BRCH_RPT.CD_PRTR=BRCH_RPT_SUMM.CD_PRTR) " +
" WHERE BRCH_RPT_SUMM.IN_BRCH_SPRS='N' " +
"AND BRCH_RPT.cd_btch = '" + mBtchCd + "' " +
"and BRCH_RPT.cd_prtr = '" + mPrtrCd + "' " +
" and BRCH_RPT.id_prsn = " + mPrsnId;
Statement statement = mDb.getConnection().createStatement( ResultSet.TYPE_SCROLL_INSENSITIVE, ResultSet.CONCUR_READ_ONLY);
String tableAlias = reportDocument.getDatabaseController().getDatabase().getTables().getTable(0).getAlias();
ResultSet resultSet = statement.executeQuery(query);
reportDocument.getDatabaseController().setDataSource(resultSet, tableAlias , "resultsetTable");
byteArrayInputStream = (ByteArrayInputStream)reportDocument.getPrintOutputController().export(ReportExportFormat.PDF);
//Use the Java I/O libraries to write the exported content to the file system.
byteArray = new bytehttp://byteArrayInputStream.available();
//Create a new file that will contain the exported result.
file = new File(mReportExportPath);
fileOutputStream = new FileOutputStream(file);
byteArrayOutputStream = new ByteArrayOutputStream(byteArrayInputStream.available());
x = byteArrayInputStream.read(byteArray, 0, byteArrayInputStream.available());
byteArrayOutputStream.write(byteArray, 0, x);
byteArrayOutputStream.writeTo(fileOutputStream);
statement.close();
resultSet.close();
byteArrayInputStream.close();
byteArrayOutputStream.close();
fileOutputStream.close();
reportDocument.close();
An unexpected error has been detected by HotSpot Virtual Machine:
Internal Error (53484152454432554E54494D450E43505001A8 01), pid=28689, tid=1
Java VM: Java HotSpot(TM) Server VM (1.5.0_13-b05 mixed mode)
T H R E A D
Current thread (0x000386f0): JavaThread "main" threadin_Java, id=1
Stack: [0xffb7e000,0xffc00000), sp=0xffbfc690, free space=505k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
V http://libjvm.so+0x70c3c4
V http://libjvm.so+0x4383b4
V http://libjvm.so+0x2fbde0
V http://libjvm.so+0x274bf4
C http://libthread.so.1+0x15bb4
C http://libthread.so.1+0xf80c
C http://libthread.so.1+0xf9bc
j java.util.HashMap.removeEntryForKey(Ljava/lang/Object;)Ljava/util/HashMap$Entry;+119
j java.util.HashMap.remove(Ljava/lang/Object;)Ljava/lang/Object;+2
j com.crystaldecisions.reports.reportdefinition.kv.a(Lcom/crystaldecisions/reports/queryengine/af;Lcom/crystaldecisions/reports/queryengine/af;Z)V+135
j com.crystaldecisions.reports.reportdefinition.datainterface.g.a(Lcom/crystaldecisions/reports/queryengine/ch;Lcom/crystaldecisions/reports/queryengine/ch;ZZ)V+229
j com.crystaldecisions.reports.reportdefinition.datainterface.g.a(Lcom/crystaldecisions/reports/queryengine/ch;Lcom/crystaldecisions/reports/queryengine/ch;ZZLcom/crystaldecisions/reports/queryengine/b/w;)V+235
j com.crystaldecisions.reports.reportdefinition.datainterface.g.a(Ljava/lang/String;Ljava/lang/String;Ljava/util/Map;Ljava/lang/String;Lcom/crystaldecisions/reports/reportdefinition/datainterface/a;)V+682
j com.crystaldecisions.reports.dataengine.bj.new()V+24
j com.crystaldecisions.reports.common.as.a(Lcom/crystaldecisions/reports/common/af;)V+96
j com.crystaldecisions.reports.common.ae.a(Lcom/crystaldecisions/reports/common/l;)V+20
j com.businessobjects.reports.sdk.b.w.a(Lcom/crystaldecisions/reports/reportdefinition/bi;Ljava/lang/Object;Ljava/lang/String;Ljava/lang/String;)V+207
j com.businessobjects.reports.sdk.b.w.int(Lcom/crystaldecisions/sdk/occa/report/lib/PropertyBag;Ljava/lang/String;)V+231
j com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(IILjava/lang/String;Lcom/crystaldecisions/client/helper/ISecurityContext;Lcom/crystaldecisions/xml/serialization/IXMLSerializable;)Lcom/crystaldecisions/proxy/remoteagent/ResultInfo;+3326
j com.crystaldecisions.proxy.remoteagent.x.a(Lcom/crystaldecisions/client/helper/ISecurityContext;Ljava/lang/String;IILcom/crystaldecisions/xml/serialization/IXMLSerializable;Lcom/crystaldecisions/proxy/remoteagent/j;)Lcom/crystaldecisions/proxy/remoteagent/ResultInfo;+70
j com.crystaldecisions.proxy.remoteagent.q.a(IILcom/crystaldecisions/xml/serialization/IXMLSerializable;Lcom/crystaldecisions/proxy/remoteagent/j;)Lcom/crystaldecisions/proxy/remoteagent/ResultInfo;+83
j com.crystaldecisions.sdk.occa.report.application.dd.a(IILcom/crystaldecisions/xml/serialization/IXMLSerializable;)Lcom/crystaldecisions/proxy/remoteagent/ResultInfo;+44
j com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Ljava/lang/Object;Ljava/lang/String;Ljava/lang/String;Ljava/lang/Object;)V+284
j com.crystaldecisions.sdk.occa.report.application.DatabaseController.setDataSource(Ljava/sql/ResultSet;Ljava/lang/String;Ljava/lang/String;)V+5
j com.crystaldecisions.reports.sdk.DatabaseController.setDataSource(Ljava/sql/ResultSet;Ljava/lang/String;Ljava/lang/String;)V+7
j com.jpmorgan.awm.jfam.ptc.reporting.AnalysisExporter.exportReport()V+157
j com.jpmorgan.awm.jfam.ptc.reporting.EODReport.main([Ljava/lang/String;)V+744
v ~StubRoutines::call_stub
V http://libjvm.so+0x19b514
V http://libjvm.so+0x2dd44c
C java0x222c main0x1164This is a problem of the VM itself. You will need to address the issue at SUN forums.
-
PSE8 crashes when I try to email photos using Adobe Email Service
The PSE8 Organizer crashes when I attempt to email photos. In the 2 months that I have owned this program it has crashed several other times, but the current problem with emailing photos always occurs at the same step in the process. I have read all the Help topics related to emailing from this program and it appears that my computer is set-up correctly. The email client is selected as Adobe Email Service. I have received a "verification code", although I have never gotten far enough into the process to enter it. I'm able to go through all the steps to create the email (selecting the photos, typing a message, and selecting recipients). A preview of the email briefly appears, but the program crashes before the hourglass goes away - so I never get to click on "send".
Is there a bug in the program? Has anyone found a solution to this problem?
Thank youHi Sourabh: Many thanks for the courtesy of your
response. Last night I again tried sending a
test image to my wife's computer. I am pasting a
copy of what comes through. There is no actual
image but only this "text" of letters, numbers
and characters which I presume is the ingredients
of an image. I have cut off some of the pasted
message since it is quite long and I only want to
convey a sample so as to show what come
through. Got any ideas? Thanks again. Ed
>I sent these using Elements Organizer. Find out
>more:
><http://www.adobe.com/go/pse_photoshopelwin_en>http://www.adobe.com/products/psprelements/
>Content-Type: ; name="1000.jpg"
>Content-Description: 1000.jpg
>Content-Id: <41201021224352240623@13071999>
>
>ÿØÿàJFIF``ÿÛC
>$.' ",#(7),01444'9=82<.342ÿÛC
>
>2!!22222222222222222222222222222222222222222222222222ÿÀí"ÿÄ
>ÿĵ}!1AQa"q2¡#B±ÁRÑð$3br
>%&'()*456789:CDEFGHIJSTUVWXYZcdefghijstuvwxyz ¢£¤¥¦§¨©ª²³´µ¶·¸¹ºÂÃÄÅÆÇÈÉÊ ÒÓÔÕÖ×ØÙÚáâãäåæçèéêñòóôõö÷øùúÿÄ
>ÿĵw!1AQaq"2B¡±Á #3RðbrÑ
>$4á%ñ&'()56789:CDEFGHIJSTUVWXYZcdefghijstuvwxyz ¢£¤¥¦§¨©ª²³´µ¶·¸¹ºÂÃÄÅÆÇÈÉÊÒÓÔÕÖ×Ø ÙÚâãäåæçèéêòóôõö÷øùúÿÚ?É×õýr?jA«ê{*Gw.ÈJ©ý¯â¯úë?÷þ_ñ£WÿîÿþÂrèÓ\ ÅÄÌQ
>gbv¦ìnÇaïíßëh¸Æ<·g_ý¯â¯úë?÷þ_ñ£û_Å_ôÖïü¿ã\öËÿq¿ïçÿZíþãßÏþµ+ ©ù÷ö¿¿è#¬ÿßùÆíÐGYÿ ¿òÿp?Û/ýÆÿ¿ýj?¶_ûÿ?úÔ\-OÌ￵üUÿAgþÿËþ4kø«þ:ÏýÿükþÙî7ýüÿëQý²ÿÜoûùÿÖ¢áj~g}ý¯â¯úë?÷þ _ñ£û_Å_ôÖïü¿ã\öËÿq¿ïçÿZíþãßÏþµSó;ïíÐGYÿ¿òÿÚþ*ÿ
>³ÿåÿà¶_ûÿ?úÔl¿÷þþõ¨¸Zßkø«þ:Ïýÿühþ×ñWýuûÿ/ø×ý²ÿÜoûùÿÖ£ûeÿ¸ß÷óÿEÂÔüÎûû_Å_ôÖïü ¿ãGö¿¿è#¬ÿßùƸíþãßÏþµÛ/ýÆÿ¿ýj.§æwßÚþ*ÿ
>³ÿåÿ?µüUÿAgþÿËþ5Àÿl¿÷þþõ¨þÙî7ýüÿëQpµ?3¾þ×ñWýuûÿ/øÑý¯â¯úë?÷þ_ñ®ûeÿ¸ß÷óÿGöËÿq¿ïçÿZ ©ù ÷ö¿¿è#¬ÿßùÆíÐGYÿ¿òÿp?Û/ýÆÿ¿ýj?¶_ûÿ?úÔ\-OÌ￵üUÿAgþÿËþ4kø«þ:ÏýÿükþÙî7ýüÿëQý² ÿÜoûùÿÖ¢áj~g}ý¯â¯úë?÷þ_ñ£û_Å_ôÖïü¿ã\öËÿq¿ïçÿZíþãßÏþµSó;ïíÐGYÿ¿òÿÚþ*ÿ
>³ÿåÿà¶_ûÿ?úÔl¿÷þþõ¨¸Zßkø«þ:Ïýÿühþ×ñWýuûÿ/ø×ý²ÿÜoûùÿÖ£ûeÿ¸ß÷óÿEÂÔüÎûû_Å_ôÖïü ¿ãGö¿¿è#¬ÿßùƸíþãßÏþµÛ/ýÆÿ¿ýj.§æwßÚþ*ÿ
>³ÿåÿ?µüUÿAgþÿËþ5Àÿl¿÷þþõ¨þÙî7ýüÿëQpµ?3¾þ×ñWýuûÿ/øÑý¯â¯úë?÷þ_ñ®ûeÿ¸ß÷óÿGöËÿq¿ïçÿZ ©ù ÷ö¿¿è#¬ÿßùÆíÐGYÿ¿òÿp?Û/ýÆÿ¿ýj?¶_ûÿ?úÔ\-OÌ￵üUÿAgþÿËþ4kø«þ:ÏýÿükþÙî7ýüÿëQý² ÿÜoûùÿÖ¢áj~g}ý¯â¯úë?÷þ_ñ£û_Å_ôÖïü¿ã\öËÿq¿ïçÿZíþãßÏþµSó;ïíÐGYÿ¿òÿÚþ*ÿ
>³ÿåÿà¶_ûÿ?úÔl¿÷þþõ¨¸Zßkø«þ:Ïýÿühþ×ñWýuûÿ/ø×ý²ÿÜoûùÿÖ£ûeÿ¸ß÷óÿEÂÔüÎûû_Å_ôÖïü ¿ãGö¿¿è#¬ÿßùƸíþãßÏþµÛ/ýÆÿ¿ýj.§æwßÚþ*ÿ
>³ÿåÿ?µüUÿAgþÿËþ5Àÿl¿÷þþõ¨þÙî7ýüÿëQpµ?3¾þ×ñWýuûÿ/øÑý¯â¯úë?÷þ_ñ®ûeÿ¸ß÷óÿGöËÿq¿ïçÿZ ©ù ÷ö¿¿è#¬ÿßùÆíÐGYÿ¿òÿp?Û/ýÆÿ¿ýj?¶_ûÿ?úÔ\-OÌ￵üUÿAgþÿËþ4kø«þ:ÏýÿükþÙî7ýüÿëQý² ÿÜoûùÿÖ¢áj~g}ý¯â¯úë?÷þ_ñ£û_Å_ôÖïü¿ã\öËÿq¿ïçÿZíþãßÏþµSó;ïíÐGYÿ¿òÿÚþ*ÿ
>³ÿåÿà¶_ûÿ?úÔl¿÷þþõ¨¸Zßkø«þ:Ïýÿühþ×ñWýuûÿ/ø×ý²ÿÜoûùÿÖ£ûeÿ¸ß÷óÿEÂÔüÎûû_Å_ôÖïü ¿ãGö¿¿è#¬ÿßùƸíþãßÏþµÛ/ýÆÿ¿ýj.§æwßÚþ*ÿ
>³ÿåÿ?µüUÿAgþÿËþ5Àÿl¿÷þþõ¨þÙî7ýüÿëQpµ?3¾þ×ñWýuûÿ/øÑý¯â¯úë?÷þ_ñ®ûeÿ¸ß÷óÿGöËÿq¿ïçÿZ ©ù ÷ö¿¿è#¬ÿßùÆíÐGYÿ¿òÿp?Û/ýÆÿ¿ýj?¶_ûÿ?úÔ\-OÌ￵üUÿAgþÿËþ4kø«þ:ÏýÿükþÙî7ýüÿëQý² ÿÜoûùÿÖ¢áj~g}ý¯â¯úë?÷þ_ñ£û_Å_ôÖïü¿ã\öËÿq¿ïçÿZíþãßÏþµSó;ïíÐGYÿ¿òÿÚþ*ÿ
>³ÿåÿà¶_ûÿ?úÔl¿÷þþõ¨¸Zßkø«þ:Ïýÿühþ×ñWýuûÿ/ø×ý²ÿÜoûùÿÖ£ûeÿ¸ß÷óÿEÂÔüÎûû_Å_ôÖïü ¿ãGö¿¿è#¬ÿßùƸíþãßÏþµÛ/ýÆÿ¿ýj.§æwßÚþ*ÿ
>³ÿåÿ?µüUÿAgþÿËþ5Àÿl¿÷þþõ¨þÙî7ýüÿëQpµ?3¾þ×ñWýuûÿ/øÑý¯â¯úë?÷þ_ñ®ûeÿ¸ß÷óÿGöËÿq¿ïçÿZ ©ù ÷ö¿¿è#¬ÿßùÆíÐGYÿ¿òÿp?Û/ýÆÿ¿ýj?¶_ûÿ?úÔ\-OÌî^ÿÄîÅ
>¥¯»w8jO¶øþzÿþÜñUÃÿl¿÷þþõ¨þÙî7ýüÿëQ
>ýÏ3¸ûo¿è'¯ÿàmÇÿGÛ|MÿA=ÿn?øªáÿ¶_ûÿ?úÔl¿÷þþõ¨Ð=Ï3¸ûo¿è'¯ÿàmÇÿU5
>w_Óm|û[]U'jî¾e½3»Ø×/o¨Ü]L"&,é§z
>)Á-¡''t'þ@rŦÓØÒ]{TÖ-5-BâíaÚ/´Hd)¸.@f$ãågùmdY¹XÜÿ!ZV×êÿò=ßÿØNOýkÖÖ§ûÍý+¾Õÿä{¿ÿ °ú4׬ÿO÷úSe¯áüÏ«¼-áo\xGE
>}KY, -
I got this error when calling report from my form：
FRM-93652: The runtime process has terminated abnormally
Forms Session ID is WLS FORMS.formsapp.101
Here is the trace dump info :
Last Trigger FORM/BLOCK/FIELD: FRM_ACTIVITY_QUEUE.BLK_ACTIVITY_QUEUE.BTN_PRINT
Last Trigger: WHEN-BUTTON-PRESSED - (In Progress)
Last Builtin: RUN_REPORT_OBJECT - (In Progress)
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
siehDumpStackTrace( call kgdsdst() 000000000 ? 000000000 ?
)+104 7FFFBF18D110 ? 7FFFBF18D1D8 ?
7FFFBF1AD130 ? 000000000 ?
siehjmpterm()+650 call siehDumpStackTrace( 000000000 ? 2B1668E4EB00 ?
) 7FFFBF18D110 ? 7FFFBF18D1D8 ?
7FFFBF1AD130 ? 000000000 ?
__restore_rt() call siehjmpterm() 00000000B ? 2B1668E4EB00 ?
7FFFBF18D110 ? 7FFFBF18D1D8 ?
7FFFBF1AD130 ? 000000000 ?
00002B1660459EB0 signal __restore_rt() 2B16603F2929 ? 7FFFBF1ADBD8 ?
000000000 ? 000000002 ?
000000001 ? 0EBC57ED8 ?
Anybody knows what might be the cause ?
ThanksRefer to : Oracle Support : Forms Runtime Crash (FRM-93652) When calling RUN_REPORT_OBJECT in 11g (Doc ID 1306368.1)
-
Permission Denied when calling a method from VB using WebLogic 8.1.2 JCOM
Hi,
We are calling an java/ejb methods from VB using WebLogic JCOM 8.1 SP2. But
using JCOM, we are getting a error Permission denied when called from VB. We think
that we should update pathch jintegra 2.0 or 2.1 in WebLogic 8.1.2 the to solve
this issue, because we faced the same problen "permission denied" when we used
JINTEGRA(third party software). Once we installed the JINTEGRA 2.1 it solved the
issue.
So, can anyone help on regard to this issue of "Permission denied" in WebLogic
JCOM 8.1 SP2.
Thanks & Regards
RaghuI too am experiencing the jCOM error: "Run-time error '70': Permission Denied". The problem appears to be related to a Microsoft Security Patch KB835732 (MS04-011 which, as you indicated, has been fixed in J-Integra v2.1 (FYI, jCOM 8.1 is based on J-Integra 1.5.4, see J-Integra/jCOM versions.
Did you ever get a resolution concerning 8.1 SP2? 8.1 SP3 is available now but I don't see any mention of jCOM updates in the WebLogic 8.1 What's New documention. I can't immediately upgrade (trying to stay on same version as a few other developers I work with) but I am hoping it is resolved in SP3. -
Skype is crashing when calling/answering calls
Ever since i updated to windows 10 skype keeps crashing when ever i call someone, or someone calls me. Can anybody help me?
Please, run the DirectX diagnostics tool. Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post. Be aware that you will have to zip this file before attaching it here.
Maybe you are looking for
-
Sap Solution Manager 7.1 SP11 Basic Configuration
Hi Experts, I am in fresh installation for Sap Solution Manager 7.1 SP11. At Basis Configuartion Phase in step " Configure CA Introscope". I have successfully installed, but it shows the following message: " Offline - The EM Connection cannot be esta
-
Scaling multiple clips without pasting attributes ??
Hi there, I have a 20 minutes fcp project which consists of 7 tracks video which are layered on top of each other. The clips of each track have been scaled down so that I see seven mini screens next to each other. The seven mini screens (each of them
-
Hello, I am designing a informational portal with which customers can search for products from various vendors. What is the best way to design a feature that allows a vendor to enter multiple products at once into my database? Thanks
-
WAIT not exiting the Wait Node
Hi , My client has a requirement to hold the execution/suspend/block program for about 30 minutes upto 2hrs using Loop counter. I have used loopcounter with looplimit 4 times--> Wait(Waitmode-->Relative time, Relative time --> 0.001388 just to test i
-
Nearest Monday from a given date - how do I do this?
Hello: We have a requirement to find the nearest Monday from a given date. Can anyone help me with this query? Thanks!