WAIT not exiting the Wait Node

Hi ,
My client has a requirement to hold the execution/suspend/block program for about 30 minutes upto 2hrs using Loop counter.
I have used loopcounter with looplimit 4 times--> Wait(Waitmode-->Relative time, Relative time --> 0.001388 just to test i have given 2mins) --> Function--> if error go back to Loop counter.
But every time it is coming to wait and gets deferred status and doesnot move ahead.
I have submitted Workflow Background process many a times with parameters Itemtype,Process deferreed-->Y and timeout -->Y and N too. But it is not picking up the wait node.
But I tried a Sample standalone workflow which went successfully after background process.
Please let me know how to proceed about this.
Regards,
Naveen.

Hi Naveen,
I am facing the same problem. Did you get the solution ?
Thanks,
Amit

Similar Messages

'Could not find the requested node error' when guests join the meeting room

I am working on a program where the owner would allow guests after they knock to enter the meeting room. Upon acceptance, they would also be permitted to publish/subscribe audio.
My ' meeting owner' application code is an adaptation of the Knocking Queue example. The 'owner app' code has the following settings in its creation complete.
// Require that guests must knock.Note that this line changes the setting of your room so that in future anyone guest coming in
// has to knock.
cSession.roomManager.guestsHaveToKnock = true;
//Enable autopromote
cSession.roomManager.autoPromote =
true;
I get an error when the owner logins in first and accepts the guest into the meeting room.
   // Event handler function for displaying the selected Alert button.
            private function alertClickHandler(event:CloseEvent):void {
             var queue:Array = pendingArray;
             if ( cSession.userManager.myUserRole == UserRoles.OWNER ) {
      var item:Object = pendingArray.shift();
      trace (item["label"]);
      trace (item["descriptor"].userID);
               if (event.detail==Alert.OK)
                //Admit user for chatting
       cSession.roomManager.knockingQueue.acceptUser(item["descriptor"].userID);
       //Allow user to publish audio - supposed to be promoted through room setting
       //audioPub.setUserRole(item.descriptor.userID, UserRoles.PUBLISHER);
      else //if (event.detail==Alert.CANCEL)
       cSession.roomManager.knockingQueue.denyUser(item["descriptor"].userID);
The 'client' application throws the following error.
SWF] C:\Documents and Settings\a246216\My Documents\Flex Builder 3\Client Chat Tool\bin-debug\ClientChatTool.swf - 1,572,471 bytes after decompression
AFCS Beta Build # : 0.92
requestInfo http://connectnow.acrobat.com/fidelity2/ramr?guk=ZzprOg==&mode=xml&x=0.011843591462820768
Getting FMS at https://na2.connectnow.acrobat.com/fms?ticket=1468amkp7k35g, attempt #1/3
result: <fms>
<origin>fms2.acrobat.com</origin>
<proto_ports>rtmps:443</proto_ports>
<retry_attempts>2</retry_attempts>
</fms>
#FMSConnector# Tue May 12 11:26:50 GMT-0400 2009 protocols: [object ProtocolPortPair]
#FMSConnector# Tue May 12 11:26:50 GMT-0400 2009 [attempt 1 of 2] Connecting to 0/0: rtmps://fms2.acrobat.com/cocomo/na2-sdk-825d634c-46ed-4ed3-aa58-7450f0f7e36a/ramr #startProtosConnect#
#FMSConnector# Tue May 12 11:26:50 GMT-0400 2009 tempNetStatusHandler 0/1,NetConnection.Connect.Success
#FMSConnector# Tue May 12 11:26:50 GMT-0400 2009 isTunneling? false
#FMSConnector# Tue May 12 11:26:50 GMT-0400 2009 is using RTMPS? true
RECEIVED LOGIN AT SESSION
.user descriptor from server [object]
    .displayName [string]= k
    .userID [string]= GUEST-110858C2-4F16-4FE8-BF2C-D572F915FEC5
    .affiliation [number]= 5
    .role [number]= 5
RECEIVENODES UserManager
receiveAllSynchData UserManager
checkManagerSync:[object UserManager]
RECEIVENODES FileManager
receiveAllSynchData FileManager
checkManagerSync:[object FileManager]
RECEIVENODES AVManager
receiveAllSynchData AVManager
checkManagerSync:[object StreamManager]
RECEIVENODES RoomManager
receiveAllSynchData RoomManager
checkManagerSync:[object RoomManager]
RECEIVENODES Chat
receiveAllSynchData Chat
Error: Could not find the requested node.
at com.adobe.rtc.sharedModel::CollectionNode/getNodeConfiguration()[C:\work\main\connect\coc omoPlayer10\src\com\adobe\rtc\sharedModel\CollectionNode.as:394]
at com.adobe.rtc.sharedManagers::StreamManager/getNodeConfiguration()[C:\work\main\connect\c ocomoPlayer10\src\com\adobe\rtc\sharedManagers\StreamManager.as:577]
at com.adobe.rtc.collaboration::AudioPublisher/onUserRoleChange()[C:\work\main\connect\cocom oPlayer10\src\com\adobe\rtc\collaboration\AudioPublisher.as:1009]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at com.adobe.rtc.sharedManagers::StreamManager/onUserRoleChange()[C:\work\main\connect\cocom oPlayer10\src\com\adobe\rtc\sharedManagers\StreamManager.as:1410]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at com.adobe.rtc.sharedModel::CollectionNode/http://www.adobe.com/2006/connect/cocomo/messaging/internal::receiveCascadingUserRole()[C: \work\main\connect\cocomoPlayer10\src\com\adobe\rtc\sharedModel\CollectionNode.as:813]
at com.adobe.rtc.messaging.manager::MessageManager/http://www.adobe.com/2006/connect/cocomo/messaging/internal::receiveUserRole()[C:\work\mai n\connect\cocomoPlayer10\src\com\adobe\rtc\messaging\manager\MessageManager.as:715]
at com.adobe.rtc.session.managers::SessionManagerBase/receiveUserRole()[C:\work\main\connect \cocomoPlayer10\src\com\adobe\rtc\session\managers\SessionManagerBase.as:352]
The above error is thrown just when the 'guest' is accepted into the meeting room. The guest has not published anything at this point.
The chat part is working fine.
I have tried different ways to resolve this issue but I am not getting anywhere. I have tried different things. Your help is appreciated.
Ram

It is win 7 64 bit system and same error on Illustrator x86 and x64.

Firefox 6 forces you to log into e-mail again & again, since you can't view an e-mail & simply close that tab.. I want to close the tab, not exit the function I am in. How do I uninstall Firefox 6 & go back to the previous version?

With Firefox 6, you can't close the tab you are in and remain in the program; opting to close one e-mail means you are forced to exit the (e-mail) program completely and then go back into it...this is ridiculous if you are trying to read all your e-mails...not have this issue. How do I uninstall Firefox 6 & go back to the previous version?

I am unwilling to attempt navigation away from these sites. The pop-ups that occur on the attempt to leave a site or to close the browser are exit traps offering incentive to stay.
Once upon a time, when the internet was less dangerous, I would be willing to close the exit pop-ups. Now, after twice being infected with malware trying to close the pop-ups, I now force close whichever browser I am using.
Recently, I clicked on the red X to close one pop-up, and it installed a trojan that I had to pay to be removed. When I clicked on 'Leave' in another exit pop, it didn't exit and it turned out I was giving permission to run a script file. Now that criminals have learned these exit pop-ups can be used to force a click action, the sites using them have become dangerous.
If I force the browser to close using Task manager, Please tell me how to stop FireFox from sending me directly back to the same site because it mistakenly believes it crashed when it did not. I forced it to close because I was on a site that had taken control of my browser and was not allowing me to leave the site.
No other browser sends me back to the potentially dangerous sites. I prefer Firefox, but the new version must have a setting that allows me to get safely away from a problem site?

DBCA does not show the remote nodes on a RAC 10.2.0.2 HP-ITANIUM

HI at all,
I have a problem and I hope someone can help me.
A collegue have installed CRS and the Oracle HOME for a RAC 10.2.0.2 on a HP-ITANIUM ( two nodes) .
Im'm using the dbca for creating a cluster database.
I can see the RAC option pages , but in the "select nodes page" I found only the local node and not the remote node.
Any suggestion is appreciated
thank you
Adriano
$ crs_stat
NAME=ora.itmicz50.LISTENER_ITMICZ50.lsnr
TYPE=application
TARGET=ONLINE
STATE=ONLINE on itmicz50
NAME=ora.itmicz50.gsd
TYPE=application
TARGET=ONLINE
STATE=ONLINE on itmicz50
NAME=ora.itmicz50.ons
TYPE=application
TARGET=ONLINE
STATE=ONLINE on itmicz50
NAME=ora.itmicz50.vip
TYPE=application
TARGET=ONLINE
STATE=ONLINE on itmicz50
NAME=ora.itmicz51.LISTENER_ITMICZ51.lsnr
TYPE=application
TARGET=ONLINE
STATE=ONLINE on itmicz51
NAME=ora.itmicz51.gsd
TYPE=application
TARGET=ONLINE
STATE=ONLINE on itmicz51
NAME=ora.itmicz51.ons
TYPE=application
TARGET=ONLINE
STATE=ONLINE on itmicz51
NAME=ora.itmicz51.vip
TYPE=application
TARGET=ONLINE
STATE=ONLINE on itmicz51
and the olsnodes command :
$ olsnodes
itmicz50
itmicz51
Message was edited by:
user549224
null

HI Chandra,
thank you very much for your reply. I suppose the oraInventory is the same, however the contents of inventory.xml file is this:
<?xml version="1.0" standalone="yes" ?>


<INVENTORY>
<VERSION_INFO>
<SAVED_WITH>10.2.0.1.0</SAVED_WITH>
<MINIMUM_VER>2.1.0.6.0</MINIMUM_VER>
</VERSION_INFO>
<HOME_LIST>
<HOME NAME="OUIHome1" LOC="/work/app/oracle/product/CRS" TYPE="O" IDX="1" CRS="true">
<NODE_LIST>
<NODE NAME="itmicz50"/>
<NODE NAME="itmicz51"/>
</NODE_LIST>
</HOME>
<HOME NAME="OUIHome2" LOC="/work/app/oracle/product/RAC10g" TYPE="O" IDX="2">
<NODE_LIST>
<NODE NAME="itmicz50"/> <===== EVIDENCE
</NODE_LIST>
</HOME>
</HOME_LIST>
</INVENTORY>
I can see that within the node_list tag I have only one hostname It is correct?
thank you in advance
Adriano Capruzzi

ADF Tree 10.1.3.1, not highlighting the selected node.

Hi,
I'm having a problem highlighting the selected node in the ADF CoreTree.
I use the treehandler and model as described in the link: http://technology.amis.nl/blog/2116/much-faster-adf-faces-tree-using-a-pojo-as-cache-based-on-read-only-view-object-showing-proper-leaf-nodes-again
I use this objects because my tree was showing leaf node with the image to collapse.
The tree now looks great, the only problem is that when i click on a node the focusRowKey is set accordingly(debugging the getter and setter) but is not show as the selected node.
The tree jspx code looks the follow:
               
                                 <af:tree value="#{ActosTreeHandler.treemodel}" var="node"
                                           focusRowKey="#{ActosTreeHandler.focusRowKey}"
                                           id="treeActos"
                                           varStatus="nodeStatus" binding="#{ActosTreeHandler.jsfTree}">
                                    <f:facet name="nodeStamp">
                                      <af:commandLink text="#{node.description}" partialTriggers="treeActos"
                                                      action="#{backing_documentos_detalhesDocumento.treeAction}">
                                        
                                        <af:setActionListener from="#{ActosTreeHandler.jsfTree.rowKey}"
                                                              to="#{ActosTreeHandler.focusRowKey}"/>
                                        <af:setActionListener from="#{node}"
                                                              to="#{ActosTreeHandler.selectedNode}"/>
                                        <af:resetActionListener/>
                                      </af:commandLink>
                                    </f:facet>
                                  </af:tree>Does anyone know how this can be solved?
Best Regards.

Hi,
is this the same as
Re: Facing a problem in programmatically setting focus on a node in <af:tre
Frank

Installer is not showing the correct Nodes in RAC

Hi Experts,
We are in the process of upgrade oracle database from 9.2.0.3 to 9.2.0.8 in RAC. While installing the 9.2.0.8 patch set it is not showing the correct database nodes, instead of it showing production database nodes, but we are doing doing it in test machine.
Test Machine hostname:
db1
db2
Prod machine hostname
prod1
prod2
it showing the prod1 and prod2 only.
please suggest us to solve this
Note:
We copy the oracle_home from prod to test for test database cloning.
Thanks
R.Sundaravel

Then it is highly likely your RAC cluster is not correctly configured.
Open an SR at metalink as the Cluster Verify tool does not exist for your old version.

I can not configure the secondary node for shared appl_top

when i run the perl -l txkSOHM.pl comand in the secondary node for shared appl_top. the system returns a "valid java executable not found"
i did check all my environments variables, all is exactly just like the primary node.
anybody can help me???

$ perl -l txkSOHM.pl
Absolute path of Application's Context XML file :
/u01/oracle/snb2appl/admin/SNB2_pth1ap.xml
Type of Instance [primary/secondary] :
secondary
Absolute path of 8.0.6 Shared Oracle Home :
/u03/oracle/snb2ora/8.0.6
Absolute path of iAS Shared Oracle Home :
/u03/oracle/snb2ora/iAS
Absolute path of config top :
/u03/oracle/PTH1
Oracle Application apps schema password :
pu3rt0
*** USER FEEDBACK ***
Absolute path of Application's Context XML file : /u01/oracle/snb2appl/admin/SNB2_pth1ap.xml
Type of Instance [primary/secondary] : secondary
Absolute path of Shared Oracle Home top :
Absolute path of 8.0.6 Shared Oracle Home : /u03/oracle/snb2ora/8.0.6
Absolute path of iAS Shared Oracle Home : /u03/oracle/snb2ora/iAS
Absolute path of config top : /u03/oracle/PTH1
Run AutoConfig [y/n] : y
Oracle Application apps schema password : pu3rt0
Absolute path of the log file : /u02/oracle/pth1comn/admin/log/SNB2_pth1ap/txkSetSOHM.log
Prompt for confirmation [y/n] : n
Absolute path of 8.0.6 config Home : /u03/oracle/PTH1/8.0.6
Absolute path of iAS config Home : /u03/oracle/PTH1/iAS
Application's Context file Saved as : /u01/oracle/snb2appl/admin/SNB2_pth1ap.xml.SOH
Valid java executable not found

The passive node should not be shared by any other SQL instance.

Dears,
the customer has SQL cluster with multiple instance for many technology. Can I install new instance to host Lync backend database or not ???
I found in the below URL
"SQL Clustering support is for an active/passive configuration. For performance reasons, the passive node should not be shared by any other SQL instance."
I want to understand Why Lync 2013 the backend SQL passive node should not be shared by any other SQL instance. whish is mean that I can not install SQL new instance to host LYNC backend on the current my SQL cluster which is work with multiple instance
http://technet.microsoft.com/en-us/library/gg398990.aspx
Amr Nassar

Hi Amr,
Yes you can install a new instance on your cluster to host the Lync back end database. I believe the statement about not sharing the passive node with any other SQL instance refers to a SQL instance outside of the A/P cluster. (Basically the passive node
should be purely that and able to handle the load in the event it becomes the active node without anything else hindering it)
Providing your SQL cluster is able to handle the load Lync places on it along with everything else you should not have any issues.
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
Georg Thomas | Lync MVP
Blog www.lynced.com.au | Twitter
@georgathomas
Lync Edge Port Check (Beta)

To exit the command window after weblogic app server startup

Hi,
The startWeblogic.cmd starts the weblogic V 10.0 server without exiting the prompt. Since our requirement wanted the startWeblogic script to exit the window after server startup, we set the parameter SET doExitFlag=true in startweblogic.cmd file , but the result was same as earlier the server started without exiting the window. Also we tried Redirecting the server starup output to a file , but even this did not exit the window.
My query is
1. What parameter options one should use to start the server so that it exits the command window in which it was started?
2. Is there an alternate way to do the same,something like to start it as a background process in Windows?
Any help in this regard would be great.
Thanks in Advance.
Best Regards,
Preethi

Not sure about parameters to startWeblogic.cmd, but from Windows you could
try
start /b startWebLogic.cmd > start.log 2 >& 1
<Preethi Ghalke> wrote in message news:[email protected]..
Hi,
The startWeblogic.cmd starts the weblogic V 10.0 server without exiting the
prompt. Since our requirement wanted the startWeblogic script to exit the
window after server startup, we set the parameter SET doExitFlag=true in
startweblogic.cmd file , but the result was same as earlier the server
started without exiting the window. Also we tried Redirecting the server
starup output to a file , but even this did not exit the window.
My query is
1. What parameter options one should use to start the server so that it
exits the command window in which it was started?
2. Is there an alternate way to do the same,something like to start it as a
background process in Windows?
Any help in this regard would be great.
Thanks in Advance.
Best Regards,
Preethi

How to force JTree to not display the leaves

Hi
Is there anyway to force JTree to not display the "end nodes" so to speak.
What I want is that if a node is a leaf and is not allowed to have children
I do not want the JTree to display them.
I need this to build a component for a custom file system view like Windows Explorer
which contains a tree with folders on the left and and contents of the currently selected( expanded)
folder on the right. But Explorer does not display any files in the left pane, only folders.
So I need to implement the same in my component

This will give you some things to think aboutimport java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.tree.*;
import javax.swing.event.*;
import java.util.*;
public class Test3 extends JFrame {
Vector nodes = new Vector();
DefaultMutableTreeNode root = new DefaultMutableTreeNode("Root");
DefaultTreeModel dtm = new DefaultTreeModel(root);
JTree jt = new JTree(dtm);
JCheckBox jcb = new JCheckBox("Allow Expansion");
Random r = new Random();
int nodeCount=0;
public Test3() {
    setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    Container content = getContentPane();
    addNodes(root,0);
    content.add(jcb, BorderLayout.NORTH);
    content.add(new JScrollPane(jt), BorderLayout.CENTER);
    jt.addTreeWillExpandListener(new TreeWillExpandListener() {
      public void treeWillCollapse(TreeExpansionEvent tse) {}
      public void treeWillExpand(TreeExpansionEvent tse) throws ExpandVetoException{
        if (jcb.isSelected()) return;
        TreeNode tn = (TreeNode)tse.getPath().getLastPathComponent();
        Enumeration e = tn.children();
        boolean expand = false;
        while (!expand && e.hasMoreElements()) {
          if (((TreeNode)e.nextElement()).getChildCount()!=0) expand = true;
        if (!expand) throw new ExpandVetoException(tse);
    setSize(400, 400);
private void addNodes(DefaultMutableTreeNode parent, int level) {
    int cnt = r.nextInt(3)+3-level;
    for (int i=0; i<cnt; i++) {
      DefaultMutableTreeNode node = new DefaultMutableTreeNode("Node"+nodeCount++);
      parent.add(node);
      nodes.add(node);
      addNodes(node, level+1);
public static void main(String[] args) { new Test3().setVisible(true); }
}

Cache not synchronized between portal nodes

Hello.
We are having a problem with a service using a cache api (com.sapportals.wcm.util.cache.ICache from bc.sf.service.cache_api.jar). The problem is fairly hard to describe, so bear with me (long description)
Environment (+applications) description:
The portal we have is composed of 4 nodes (2 machines with 2 server nodes each, running ep6 sp2). We are using a service as described above, that basically parses a folder structure from the km repository and puts it into an object and the object into the cache. The objects are modified whenever the folder structure is modified (we have an event listener on a specific folder). Let's call this serviceApp. We have then another application that uses the cached object to display a tree in an iView. Let's call this iViewApp.
Problem description:
Whenever the folder in the km folders is modified, the cached object is modified by the serviceApp. If you are accessing the portal on -say- node1, then the cached object is immediately available to iViewApp. But if you access then the portal from -say- node2 and open the iViewApp, the updated object is not available (an older "version" of the cached object is displayed). The cached object is updated only if modifications in the km folder are performed on node2 (and hence the service instance from node2 rebuild the cached object). So: on node1 the cached object is updated. On node2 it is NOT updated. Also, the modifications performed in the km folders on nodeX are immediately available on nodeX but not on the other nodes (only after some time they become available). Also, modifying km folders on nodeX raises an event (caught by the handler running on nodeX but NOT by the handlers on other nodes). <i>(***)</i> When the modifications in km folders become available on the other nodes (due to synchronization, I reckon), the event handlers do not react (hence, we think an event is not raised).
Question no1:
We have come to the conclusion that maybe the problem is that the caching memory zone is not synchronized between the server nodes. Any ideas how to fix this?
Question no2:
Which api is better to use for caching? The ICache from the bc.sf.service.cache_api.jar or the ICacheService from com.sap.portal.compatibility50.cacheapi.jar? Or maybe another one (we only know of these 2)?
Question no3:
Is the <i>(***)</i> conclusion correct?
Thank you. Sorry again for the long post.

Hi Silviu,
We are facing the same problem with the cached objects across nodes. Would you share any information/solution to resolve this ?
Regards,
Melwyn

Cluster VMs not accessible from other node hyper-v 2012 r2

I have implementing 3 node cluster using Windows server 2012 r2 hyper-v environment, Scenario as below....
3 HP server, every server 4 NIC`s, i made team using 4 NIC`s, and Cisco switch port configured as ether-channel and trunk port.
cluster up and running across all node, suddenly i have faced that i can`t access VM when its not on the same node from where i am accessing Cluster manager. but i can access that VM only if i log on that owned node via cluster manager.\
Please help.
Thanks
Shipon

Hi Shipon,
Your network configuration not meet the cluster network requirement,
Network adapters and cable (for network communication): The network hardware, like other components in the failover cluster solution, must be marked as "Certified for Windows
Server 2008 R2." If you use iSCSI, your network adapters should be dedicated to either network communication or iSCSI, not both.
In the network infrastructure that connects your cluster nodes, avoid having single points of failure. There are multiple ways of accomplishing this. You
can connect your cluster nodes by multiple, distinct networks. Alternatively, you can connect your cluster nodes with one network that is constructed with teamed network adapters, redundant switches, redundant routers, or similar hardware that removes single
points of failure.
The related KB:
Network Recommendations for a Hyper-V Cluster in Windows Server 2012
http://technet.microsoft.com/en-us/library/dn550728.aspx
Understanding Requirements for Failover Clusters
http://technet.microsoft.com/en-us/library/cc771404.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I have 3 songs waiting to download for 3 days. I am unable to swipe to delete and I have rebulit my itunes libary which did not remove the songs from my phone. What do I need to do to get rid of these songs?

I have 3 songs waiting to download for 3 days. I am unable to swipe to delete and I have rebulit my itunes libary which did not remove the songs from my phone. What do I need to do to get rid of these songs?

Hi RadarCat16,
Welcome to the Apple Support Communities!
I know it can be frustrating when you are waiting for content to download to your iPhone from the iTunes Store. There are a few steps I would recommend in this situation. Please read over and follow the steps in the attached article.
iTunes: How to resume interrupted iTunes Store downloads
http://support.apple.com/kb/HT1725
If your download was interrupted using your iPhone, iPad, or iPod touch
From the Home screen, tap the iTunes app.
For iPhone or iPod touch, tap More > Downloads. For iPad, tap Downloads.
Enter your account name and password if prompted.
Tap the blue download arrow to resume.
If you can't complete the download on your iOS device, you can download it in iTunes on your Mac or PC and then sync it to your iOS device. You can also transfer purchases from your iPhone, iPad, or iPod to a computer.
Have a great day,
Joe

Why dose not see the call waiting notification when other party in a call with some one ?

why dose not see the call waiting notification when other party in a call with some one ?

Because that is not a feature of the iPhone (or of most phones). If someone does not answer when you call, it means they do not want to or cannot talk to you at that time. They could be on another call or they could be simply busy doing something else. Why does it matter which?

TA38607 how do i deactivate call waiting while i could not find the call waiting in the Phone folder

how do i deactivate call waiting while i could not find the call waiting in the Phone folder

If you have a CDMA phone, there is no way to deactivate Call Waiting from the phone. You'll need to contact your carrier.

WAIT not exiting the Wait Node

Similar Messages

Maybe you are looking for