Crashed with Could not set state of SVC:/system/early-manifest
The system unexpectedly crashed.
The following message is displaying:
could not set state of SVC:/system/early-manifest import: default: Not owner
This is the 2nd time that happened. Bios was upgraded and reinstalled Solaris 11 the first time that crashed and got the same message
Any Ideas
Thank's guy's. I actually just commented out the assembly line of code for the mvc assemble and changed the runtime binding code to look for v 3.0.0.1 in web.config and this has done the trick. I'm not sure if that was the best solution but having spent
over a day on it time was a big factor.
Similar Messages
-
Want help with "Could not set up your CS Live account. Try again later."
Hi Folks
I've got an NFR of CS6 and I'm trying to give Adobe Story a shot.
Seems it requires online content and a CS Live account to do anything.
But when I try to create one it dies with the error message:
Account setup not completed
Could not set up your CS Live account. Try again later.
Can you help?
Joe
UPDATE: Downloaded update and that fixed things.
However, turns out my NFR of CS6 Production Premium doesn't allow me to use Story.
And here all I wanted to to do try out the transcription features of Premiere Pro.
Without a script it's complete gobbledygook. Would like to try it with a script but it appears I need Story to convert my PDF to Adobe Story format.
Oh well.I ran into the same problem you did, Joe. I just realized Story is all online now. Story.Adobe.com
-
This was all working yesterday, but this morning, I cannot run in the dev fabric, or even setting the website project as a startup project directly, I get the following error:
Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.BadImageFormatException: Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Assembly Load Trace: The following information can be helpful to determine why the assembly 'msshrtmi' could not be loaded.
=== Pre-bind state information ===
LOG: User = Andrew-VAIO\Andrew
LOG: DisplayName = msshrtmi
(Partial)
WRN: Partial binding information was supplied for an assembly:
WRN: Assembly Name: msshrtmi | Domain ID: 3
WRN: A partial bind occurs when only part of the assembly display name is provided.
WRN: This might result in the binder loading an incorrect assembly.
WRN: It is recommended to provide a fully specified textual identity for the assembly,
WRN: that consists of the simple name, version, culture, and public key token.
WRN: See whitepaper http://go.microsoft.com/fwlink/?LinkId=109270 for more information and common solutions to this issue.
LOG: Appbase = file:///C:/Users/Andrew/Desktop/Beko2011Azure/Website/
LOG: Initial PrivatePath = C:\Users\Andrew\Desktop\Beko2011Azure\Website\bin
Calling assembly : (Unknown).
===
LOG: This bind starts in default load context.
LOG: Using application configuration file: C:\Users\Andrew\Desktop\Beko2011Azure\Website\web.config
LOG: Using host configuration file:
LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework\v4.0.30319\config\machine.config.
LOG: Policy not being applied to reference at this time (private, custom, partial, or location-based assembly bind).
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/Temporary ASP.NET Files/root/cb955b02/eef106e2/msshrtmi.DLL.
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/Temporary ASP.NET Files/root/cb955b02/eef106e2/msshrtmi/msshrtmi.DLL.
LOG: Attempting download of new URL file:///C:/Users/Andrew/Desktop/Beko2011Azure/Website/bin/msshrtmi.DLL.
ERR: Failed to complete setup of assembly (hr = 0x8007000b). Probing terminated.
Stack Trace:
[BadImageFormatException: Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.]
System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) +0
System.Reflection.RuntimeAssembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) +39
System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection, Boolean suppressSecurityChecks) +132
System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +144
System.Reflection.Assembly.Load(String assemblyString) +28
System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +46
[ConfigurationErrorsException: Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.]
System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +618
System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() +209
System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +130
System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection compConfig) +178
System.Web.Compilation.BuildManager.GetPreStartInitMethodsFromReferencedAssemblies() +94
System.Web.Compilation.BuildManager.CallPreStartInitMethods() +332
System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters, PolicyLevel policyLevel, Exception appDomainCreationException) +677
[HttpException (0x80004005): Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.]
System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +9079228
System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +97
System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) +258
Note that the dev machine is x64 Win7.
I have not tried deploying this to staging since the issue started as I'm a bit nervous of touching the staging/live environment until this is solved.
Removing the PlatformTarget element from the project file has no effect
Removing the msshrtmi.dll file from the bin directory of the website project ends up with
'Could not load file or assembly 'Microsoft.WindowsFabric.Common, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified'
I have used Git to revert to the last working build to no effect (But I don't have the obj/bin folders in GIT), but it has atleast reset the project files etc.
If I return msshrtmi.dll to the bin folder and switch the model and website projects to x64 there is no change
If I switch both to x86 then I get an error Could not load file or assembly 'BekoModel2011' or one of its dependencies. An attempt was made to load a program with an incorrect format.
which is the model project - presumably because to run on my x64 machine I need the 64bit version?
I really need to be able to debug and then publish some changes ASAP.
AndrewHi,
Is it true that you're using IIS to host the application? Could you check whether the process is x64 or x86 one via task manager or config in IIS manager?
http://blogs.msdn.com/b/rakkimk/archive/2007/11/03/iis7-running-32-bit-and-64-bit-asp-net-versions-at-the-same-time-on-different-worker-processes.aspx
Allen Chen [MSFT]
MSDN Community Support | Feedback to us
Get or Request Code Sample from Microsoft
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
Situation:
SSIS Package designed in SQL Server 2012 - SQL Server Data Tools
Windows 7 - 64 bit.
The package (32 bit) extracts data from a SQL Server db to an Excel Output file, via an OLE DB connection.
It uses 3 package variables:
*) SQLCommand (String) to specify the SQL Statement to be executed by the package
Property path: \Package.Variables[User::ExcelOutputFile].Properties[Value]
Value: f:\Output Data.xls
*) EXCELOutputFIle (String) to specify path and filename of the Excel output file
Property path: \Package.Variables[User::SQLCommand].Properties[Value]
Value: select * from CartOrder
*) VarObjectDataSet (Object) to hold the data returned by SQL Server)
Property path: \Package.Variables[User::VarObjectDataSet].Properties[Value]
Value: System.Object
It consists out of 2 components:
*) Execute SQL Task: executes the SQL Statement passed on via a package variable. The resultng rows are stored in the package variable VarObjectDataSet
*) Script Task: creates the physical output file and iterates VarObjectDataSet to populate the Excel file.
Outcome and issue:The package runs perfectly fine both in SQL Server Data Tools itself and in DTEXECUI.
However, whenever I run it via SQL Server Agent (with 32 bit runtime option set), it returns the errror message below.
This package contains 3 package variables but the error stating that a package variable can not be set, pops up for the VarObjectDataSet only. This makes me wonder if it is uberhaupt possible to set the value of a package variable
of type Object.
Can anybody help me on this please ?
Message
Executed as user: NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 6:40:20 PM DTExec: Could
not set \Package.Variables[User::VarObjectDataSet].Properties[Value] value to System.Object. Started: 6:40:20 PM Finished: 6:40:21 PM Elapsed: 0.281 seconds. The package execution failed. The step failed.
Thank you very much in advance
JurgenHi Visakh,
thank you for your reply.
So, judging by your reply, not all package variables used inside a package need to be set a value for when run in DTEXEC ?
I already tried that but my package ended up in error (something to do with "... invocation ...." and that error is anything but clearly documented. Judging by the error message itself, it looks like it could be just about anything. that is why I asked my
first question about the object type package variable.
Now, I will remove it from the 'set values' list and try another go cracking the unclear error-message " ... invocation ...". Does an error message about " ... invocation ..." ring any bells, now that we are talking about it here ?
Thx in advance
Jurgen
Yes exactly
You need to set values only forthem which needs to be controlled from outside the package
Any variable which gets its value through expression set inside package or through a query inside execute sql task/script task can be ignored from DTExec
Ok I've seen the invocation error mostly inside script task. This may be because some error inside script written in script task. If it appeared after you removed the variable then it may because some reference of variable existing within script task.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
Hi All,
I am running a fresh install of SCDPM 2012 R2 with a protection group that is backing up the 'C:\', Bare Metal and System State of some VMs. If i add any additional servers to the group since the first creation it returns the following error:
Modify protection group: System State & Bare Metal Recovery failed:
Error 419: DPM could not set security permissions on the replica or recovery point volume that was created.
Error details: The process cannot access the file because it is being used by another process
Recommended action: Review the error details, take appropriate action and retry the operation.
If i re-create the whole protection group it works fine.
Could any one advise any further diagnostics I can do to try and locate the reason behind not being able to modify the group after the first creation? I can add new servers to other PGs without any issues.
Thanks in advance,
DanIf you are protecting any of the system state/BMR protection. Can you stop protection by deleting the older recovery points and then recreate the protection group.
This thread mentions this to be a hardware issue, albeit with less information on what exact hardware issue:
https://social.technet.microsoft.com/Forums/en-US/480679c2-1079-4847-ab38-5cc8f454ef86/error-419-dpm-could-not-set-security-permissions-on-the-replica-or-recovery-point-volume-that-was?forum=dataprotectionmanager
Regards, Trinadh [MSFT] This posting is provided AS IS with no warranties, and confers no rights. If you found the reply helpful, please MARK IT AS ANSWER. Looking for source of information for DPM? http://blogs.technet.com/b/dpm/ http://technet.microsoft.com/en-in/library/hh758173.aspx -
Windows could not set a partition active on disk 0. error 0X80300024
I followed the "Step-by-Step: Basic Windows Deployment" Link: http://technet.microsoft.com/en-us/library/dd349348%28v=ws.10%29.aspx
after creating aotounattend.xml file, I went to step2: building reference installation. however, recieving the below error message:
"windows could not set a partition active on disk 0. The target disk, partition, or volume does not support the specified operation. The error occurred while applying the unattend asnwer file's <DiskConfiguration> setting. Error code: 0X80300024"
it happened in the beginning of installation.
what's more, before that error, system still asked me to choose which languange in the installation and I also need to click install button to begin installation.
I believe that with answer file, windows 7 should start installation automatically. Am I right?
Here is my answer file:
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="specialize">
<component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Home_Page>http://www.google.com</Home_Page>
</component>
</settings>
<settings pass="oobeSystem">
<component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Reseal>
<Mode>Audit</Mode>
</Reseal>
</component>
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<OOBE>
<HideEULAPage>true</HideEULAPage>
<ProtectYourPC>3</ProtectYourPC>
</OOBE>
</component>
</settings>
<settings pass="windowsPE">
<component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SetupUILanguage>
<UILanguage>en-us</UILanguage>
</SetupUILanguage>
<InputLocale>en-us</InputLocale>
<SystemLocale>en-us</SystemLocale>
<UILanguage>en-us</UILanguage>
<UserLocale>en-us</UserLocale>
</component>
<component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<UserData>
<AcceptEula>true</AcceptEula>
</UserData>
<DiskConfiguration>
<Disk wcm:action="add">
<CreatePartitions>
<CreatePartition wcm:action="add">
<Order>1</Order>
<Size>300</Size>
<Type>Primary</Type>
</CreatePartition>
<CreatePartition wcm:action="add">
<Extend>true</Extend>
<Order>2</Order>
<Type>Primary</Type>
</CreatePartition>
</CreatePartitions>
<ModifyPartitions>
<ModifyPartition wcm:action="add">
<Active>true</Active>
<Format>NTFS</Format>
<Label>System</Label>
<Order>1</Order>
<PartitionID>1</PartitionID>
</ModifyPartition>
<ModifyPartition wcm:action="add">
<Format>NTFS</Format>
<Label>Windows</Label>
<Order>2</Order>
<PartitionID>2</PartitionID>
</ModifyPartition>
</ModifyPartitions>
<DiskID>0</DiskID>
<WillWipeDisk>true</WillWipeDisk>
</Disk>
<WillShowUI>OnError</WillShowUI>
</DiskConfiguration>
<ImageInstall>
<OSImage>
<InstallTo>
<DiskID>0</DiskID>
<PartitionID>2</PartitionID>
</InstallTo>
<InstallToAvailablePartition>false</InstallToAvailablePartition>
<WillShowUI>OnError</WillShowUI>
</OSImage>
</ImageInstall>
</component>
</settings>
<cpi:offlineImage cpi:source="wim:c:/users/dyang3/desktop/install.wim#Windows 7 ENTERPRISE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>Hi all,
I have created an answer file using Windows SIM tool. Please find the answer file below:
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="windowsPE">
<component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DiskConfiguration>
<Disk wcm:action="add">
<CreatePartitions>
<CreatePartition wcm:action="add">
<Extend>true</Extend>
<Order>1</Order>
<Type>Primary</Type>
</CreatePartition>
</CreatePartitions>
<ModifyPartitions>
<ModifyPartition wcm:action="add">
<Active>true</Active>
<Format>NTFS</Format>
<Label>System</Label>
<Letter>C</Letter>
<Order>1</Order>
<PartitionID>1</PartitionID>
</ModifyPartition>
</ModifyPartitions>
<DiskID>0</DiskID>
<WillWipeDisk>true</WillWipeDisk>
</Disk>
<Disk wcm:action="add">
<CreatePartitions>
<CreatePartition wcm:action="add">
<Extend>true</Extend>
<Order>1</Order>
<Type>Primary</Type>
</CreatePartition>
</CreatePartitions>
<ModifyPartitions>
<ModifyPartition wcm:action="add">
<Active>true</Active>
<Format>NTFS</Format>
<Label>DB_Data</Label>
<Letter>D</Letter>
<Order>1</Order>
<PartitionID>1</PartitionID>
</ModifyPartition>
</ModifyPartitions>
<DiskID>1</DiskID>
<WillWipeDisk>true</WillWipeDisk>
</Disk>
<Disk wcm:action="add">
<CreatePartitions>
<CreatePartition wcm:action="add">
<Extend>true</Extend>
<Order>1</Order>
<Type>Primary</Type>
</CreatePartition>
</CreatePartitions>
<ModifyPartitions>
<ModifyPartition wcm:action="add">
<Active>true</Active>
<Format>NTFS</Format>
<Label>Image_Data</Label>
<Letter>E</Letter>
<Order>1</Order>
<PartitionID>1</PartitionID>
</ModifyPartition>
</ModifyPartitions>
<DiskID>2</DiskID>
<WillWipeDisk>true</WillWipeDisk>
</Disk>
</DiskConfiguration>
<ImageInstall>
<OSImage>
<InstallTo>
<DiskID>0</DiskID>
<PartitionID>1</PartitionID>
</InstallTo>
</OSImage>
</ImageInstall>
<UserData>
<AcceptEula>true</AcceptEula>
</UserData>
</component>
<component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SetupUILanguage>
<UILanguage>en-US</UILanguage>
<WillShowUI>Never</WillShowUI>
</SetupUILanguage>
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
</settings>
<settings pass="oobeSystem">
<component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<AutoLogon>
<Password>
<Value>YQBkAG0AJABwAHcAZAAkADQAJABtAGUAZABQAGEAcwBzAHcAbwByAGQA</Value>
<PlainText>false</PlainText>
</Password>
<Username>Administrator</Username>
<Enabled>true</Enabled>
</AutoLogon>
<FirstLogonCommands>
<SynchronousCommand wcm:action="add">
<CommandLine>cmd /c wmic useraccount where "name='Administrator'" set passwordExpires=FALSE</CommandLine>
<Order>1</Order>
</SynchronousCommand>
</FirstLogonCommands>
<UserAccounts>
<AdministratorPassword>
<Value>YQBkAG0AJABwAHcAZAAkADQAJABtAGUAZABBAGQAbQBpAG4AaQBzAHQAcgBhAHQAbwByAFAAYQBzAHMAdwBvAHIAZAA=</Value>
<PlainText>false</PlainText>
</AdministratorPassword>
</UserAccounts>
</component>
</settings>
<settings pass="specialize">
<component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
<component name="Microsoft-Windows-ServerManager-SvrMgrNc" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DoNotOpenServerManagerAtLogon>true</DoNotOpenServerManagerAtLogon>
</component>
</settings>
<settings pass="generalize">
<component name="Microsoft-Windows-ServerManager-SvrMgrNc" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DoNotOpenServerManagerAtLogon>true</DoNotOpenServerManagerAtLogon>
</component>
</settings>
<settings pass="auditSystem">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="NonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<AutoLogon>
<Password>
<Value>YQBkAG0AJABwAHcAZAAkADQAJABtAGUAZABQAGEAcwBzAHcAbwByAGQA</Value>
<PlainText>false</PlainText>
</Password>
<Enabled>true</Enabled>
<Username>Administrator</Username>
</AutoLogon>
<UserAccounts>
<AdministratorPassword>
<Value>YQBkAG0AJABwAHcAZAAkADQAJABtAGUAZABBAGQAbQBpAG4AaQBzAHQAcgBhAHQAbwByAFAAYQBzAHMAdwBvAHIAZAA=</Value>
<PlainText>false</PlainText>
</AdministratorPassword>
</UserAccounts>
</component>
</settings>
<cpi:offlineImage cpi:source="wim:c:/coem/workbenchwin2008/iso/sources/install.wim#my win2008 san install" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>
It doesn't work. System configurations are,
-> system with out build-in harddisk
-> there were 3 disks from SAN
-> you can see that disks 0, 1 and 2 are configured in diskconfiguration section.
After constructing new COEM with this answer file, when i boot the system via DVD disk, in some point in time, i get the following exception:
the
target disk, partition or voume doesnot support the specified operations.
The
error occured while applying the unattended answer file's <DiskConfiguration> setting. Error code 0x80300024
any help would be appreciated.
Thank you
Regards,
Saravanan -
Error: Object variable or with variable not set while accessing BPC Excel
Hi,
I am working on BPC NW 7.5. When I am trying to access BPC for Excel I am getting the below error.
'object variable or with variable not set'
When I click on BPC for Excel it ask for the credentials, after entering it we encounter this error.
Any idea why is this happening?
Regards,
Priyanka SinghHi Renne,
Could you share me the solution to resolve the issue?
I am getting an error "object variable or with block variable not set" while trying to submit data through an Input schedule.
I am working on SAP BPC 7.0 NW and using MS Excel 2003.
I can log in to BPC Admin and excel with my user id and password.
Only when i am trying to click esubmit --> send and refresh schedules i am getting this error.
I checked my security profile and i have the submit data task in my task profile.
Following couple existing SDN postings i tried to check the ADD-INs of the excel on my system. However it looks like the steps listed in the existing SDN posts are for MS EXCEL 2007.
Please suggest me how do i resolve this issue. Please note I am working on SAP BPC 7.0 NW and using MS Excel 2003.
Regards,
Jagat -
[Apache 2] Critical error mod_rewrite: Could not set permissions on rewrite
Hi,
Well I had a look around to this problem and it seems it is specific to mac os system on intel machines, so I send my post here.
I had installed the apache 2 server from www.serverlogistics.com and it seems to start. However it is impossible to log into my local website with an error in my web browser "can't log to "localhost" server".
By reading the logs I got in /Library/Apache2/logs/error_log (where there is also a httpd.pid file): [crit] (14)Bad address: mod_rewrite: Could not set permissions on rewriteloglock; check User and Group directives Configuration Failed
So, I commented the line "LoadModule rewrite_module modules/mod_rewrite.so" in /Library/Apache2/conf/httpd.conf with no efffect at all.
Then I don't know what to do.... any idea please ?
NB : I did not configure or set any htaccess file in any directory.
Denisdenis_4l wrote:
Hi,
Well, I had tried several ways among others MAMP. With, MAMP, I experienced some problems running MySQL and or Apache server.
If you'd like help, you need to describe the specific problems you're having. You're not giving people here much to go on in order to be able to help. Without knowing what you've already tried, and what the results were, it's impossible to say if you've just made a simple mistake or if you've truly hit upon something that won't work. The Apache logs are especially helpful, with lots of detailed information to help in troubleshooting.
To say the true, I bought this Macbook because the system kernel is 100% compatible with Linux, and I was full of naives hopes, thinking that I will install/compile easily softwares that are usual under Linux world.....
I certainly haven't had much problem compiling and installing software that's distributed as source code, though I haven't tried to compile Apache. While it's true that much of the software will compile, it's also true that you might have to make some small changes here and there to the source code to get it to work correctly. But you might also have to do the same thing to get them to compile on different Linux distributions. So OS X isn't that different in that respect.
If you want to get Apache 2 running with MAMP, post back with specific information on what problems you had and I'll try to help. I've been hacking at Apache installations for many years now, so if I know the problems you're having, there's a good chance I've been through them, too.
charlie -
WARNING:Could not set the asynch I/O limit
Every night database generate trace files with WARNING below
Does anybody knows what this mean?
WARNING:Could not set the asynch I/O limit to 252 for SQL direct I/O. It is set to 200
Oracle Version: 11.1.0.7
AIX 5.3As I said read metalink note 783128.1 or 759060.1.
There is bug 7409110. Look at it, maybe there exists patch. -
Adobe LiveCycle Designer 8 - Crash (Memory could not be "written")
I was using Adobe LiveCycle Designer 7.1 for the past half year. All of a sudden, it started to crash - Memory could not be "written".
During that period I heard quite a lot about Adobe's bugs, so I decided to install Adobe LiveCycle Designer 8.0 hoping to see improvement over software stability and compatibility.
Of course I uninstalled the older verion, deleted the older file folders then did a clean-install of 8.0
Interesting enough, the first time I open up Adobe LiveCycle Designer 8, everything went normal. Without doing anything, I closed it then tryied to re-open it, the splash screen shows up then nothing happens - not a single error message.
Then I tried the following:
1. restarted PC. Tried the open-close-reopen squence, same thing happened.
2. uninstalled 8.0, deleted the folders, reinstalled 8.0. open-close-reopen, same thing happed.
2. uninstalled 8.0, deleted the folders, reinstalled 7.1. Open LiveCycle Designer 7.1 -> Crash (Memory could not be "written")
Findings:
1. the errors are consistent
2. it can open ONLY once, is this an activation issue? is there a corrupted file?Well when I tried to open the sample project I got this error:
"Open project was cancelled or the application was unable to load database for "C:\PROGRAM FILES\Adobe\Adobe RoboHelp 8\RoboHTML\Samples\en_US\CCC\CCC.cpd""
I couldn't delete the CPD file because this client has locked down the computer to the point where I cannot do anything more than view the files in the program folder. Without having the ability to write to the program files folder is it possible this is an issue? Or is it ok that I do all the creating content in the RoboHelp Project on the C drive?
It allowed me to copy the Sample folder to the RoboHelp Project folder on the C drive. I deleted the CPD file then opened it without a problem. I created a topic and added some content, but nothing happened. When RH8 crashed before there was no rhyme or reason and I cannot duplicate the error. Just seems very sponataneous.
I need to finish the style guide project today, but I will also play with the sample folder and see if (1) it happens again and (2) if I can figure out how to duplicate the error consistently. The first 2 times I had been in the new topic and wrote several paragraphs without saving it. Can't remember how long from topic creation to crash. And I can't remember if it crashed on trying to save or not, but I'm pretty sure I had not tried to save prior to the crash.
Regards,
CJ -
I have not set up my apple pay at all yet, so there are no cards on it. I open up Passbook, and click "Set Up Apple Pay" and it just pops up with a dialog box that says "Could Not Set Up Apple Pay" and nothing happens. Sometimes it asks me to log in with my Apple ID but then the box appears again. How do I get around this?
The credit card question is irrelevant because I can't get far enough in the process of setting up my apple pay to input a card. But if I were to get far enough, it would be the same card that is associated with my Apple ID.
My restrictions are all off.
I reset my phone and the problem still remains
Here is what happens in as much detail as I can explain: I awake my phone. I open Passbook, I then tap "Set Up Apple Pay" and 2-5 seconds later this is the screen I get.
It gives me no other options. I can select "Set Up Apple Pay" over and over again and nothing changes. This is the same result if I were to go through Settings > Passbook & Apple Pay > Add Credit or Debit Card.
I don't know what to do. -
Workflow Error Message: System Account - The Workflow could not set Content Approval Status
This is the first time I try an approval workflow. I am using a template in MS Word and assigned an approval workflow to it. The approval workflow is only going to one person in this case.
When I start the work flow the following 3 error messages show up:
Workflow Error Message: System Account - The Workflow could not set Content Approval Status. Enable content moderation for this list and run the workflow again.
Workflow Error Message: System Account - The e-mail message cannot be sent. Make sure the e-mail has a valid recipient.
Workflow Error Message: System Account - The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
Thank you for your kind guidance.Hi,
For the first error: Did you set Content Approval in the workflow? If so, see if you have it in the versioning settings of the list settings.
For the second error: double check your recipient is set up as being valid. Did you type in the email address or is it referring to a people picker field? also, make sure that in the workflow for the email that you actually populated it in the
To: field.
for the third error: I suspect that either your farm is not configured for email. Or, this error is a knock on from the second error. If you get the second error rectified it may clear this error. If not then double check the email settings
for your farm.
Johnathan Lightfoot -
Error: Object variable or with variable not set while accessing
Hi Friends,
I am facing 'object variable or with variable not set' Error while opening BPC Excel.
I have done, In Excel 2007, go to Excel Option -> Add-Ins -> Manage: COM Add-ins and Go...
You look "BPC COM" disable and need enable again.
But I am getting same Error message again and again. Please help me...
I did BPC uninstall & install but still error massage poping
Thank you in AdvanceHi Kumar,
I doubt if you are following the below steps. Please confirm. Thanks
1. Open your normal Excel.
2. Check for Planning and Consolidation tab on the top ribbon.
3. I assume this wouldn't be available for you.
4. If this is not present, open the Excel Options
5. Click on Add-Ins and check the Active Application Add-ins
6. Is Planning and consolidation present in it?
7. If not, select "Disabled Add-ins" in the drop down below besides "Manage".
8. Click "GO"
9. Select the Planning and Consolidation add-in from disabled add-ins and "Enable" it.
10. Check once again if this add-in is prersent in "Active" add-ins .
11. Now close and re-open excel
12. The Tab should be present now (Planning and Consolidation)
Regards,
Sanjeev -
I spent roughly 6 hours on a (motion) project in Photoshop, saved as psd, and now every time I try to open it, it comes up with "could not complete your request because of a program error". This really annoys me, for one, it DOESN'T TELL ME WHAT ERROR! How can I get help from Adobe if they have no clue what error it is?
I'm running windows 8.1 64 bit
I'm using Adobe Creative Cloud
I've tried everything people say to do, but nobody else but me seems to be using Photoshop for video editing. I really need this video.Does anyone have any other ideas as this is very frustrating.
Thanks,
James
Maybe you are looking for
-
Unable to use the OCWST or Web Client to connect to the calendar Server
While trying to log into the calendar using the web client i am getting the error : An error occurred during processinig Information: Cannot retrieve node information While connecting using the OCWST i am getting the error; I am using WSAD to do the
-
Battery replacement caused super slow performance
I experience a strange behaviour of my laptop after the battery change i.e. horrible lags – the operating system is literally choking, and loading takes. First I thought that maybe that is a coincidence so I tried to clean the drive, to use a disk u
-
How do i convert my mp3 songs to itunes for ipod touch use
how do i convert my mp3 songs to itunes for ipod touch use?
-
Fsck throwing up a bunch of errors with my ESP
I've had the same problem this guy seemed to have; my Arch install wouldn't be able to mount my EFI partition. All this happened after I updated a few packages yesterday: I had some kernel panic, and when I tried to fix it, I clearly messed something
-
Error opening files on a server "Application is missing" for every file type
Hello, I have got quite a strange problem with Maverick and a server (Isilon NAS). When we connect to this server, with SMB or CIFS, it's impossible to open a file because "The application is missing". They are .PDF or .XLSX files mainly, so nothing