Crashing issue with dual cards not in SLI mode

Running CS6 on a HPZ820 with 64GB RAM and TWO Nividia Quadro4000s... having some crashing issues - DisplaySurface.dll error. I am NOT running cards in SLI mode. Any ideas? I have some NewBlueFX plug-ins that I disabled the GPU - that helped. But now it started crashing again with same error. System was built up to specs.
Any advice?

Does it crash if you remove one of the cards?

Similar Messages

  • LMS 4.2.3 - C6500 VSS - Issue with inline card on secondary chassis

    Hello,
    We are currently setting up a fresh new LMS 4.2.3 server to administrate a 90 LAN-device-perimiter. Installation is OK (on a Windows Server), devices are up, monitored and their configurations archived.
    The core switches are Catalyst 6506 VSS (s2t54-IPSERVICESK9-M - 15.1(1)SY) including 2 inlines cards :
    - WS-C6505E-SUP2T
    - WS-X6824-SFP-2T
    There is an issue with line card WS-X6824-SFP-2T recognition on secondary chassis only. We updated the last software packages for LMS (via Admin > Software Center > Device Update) and situation improved but still, it is not behaving as excepted.
    Impact : Topology, Ciscoview and Device Center for C6506-VSS do not show the card and links on the WS-X6824-SFP-2T of secondary chassis.
    Do you have this issue as well ? Any direction or help ?
    I am afraid of a potential bug...
    Rgds,
    Yoann

    When you were placing the internal test calls, where was your phone located?   The RTP streams are usually only set up between the two endpoints (assuming no transcoder or MTP is used).
    Have you have already checked calls between IP phones at your central site (where Unity is located) and IP Phones at site A?   Are these working fine?   If not, then it's likely you do have a QoS issue over the WAN to Site A.
    Have you confirmed whether or not calls from the PSTN gateway at site A experience any voice QoS issues when transferred to an IP Phone at the central site?
    Is the same codec is being used for the MGCP gateway as for IP Phones at that site (check the Region settings for the Device Pool it's in)?
    If these things have all been checked, then you may want to consider collecting a simultaneous sniffer trace from each end of a single call, and comparing what's seen at the two endpoints.
    Kind regards,
    Craig

  • HT1918 How do you solve an issue with the card? I don't get the option of 'none' :(

    How do you solve an issue with the card? I don't get the option of 'none'

    I had this exact same problem with the new iPhone I bought on 1/4/13. The walk through they provide on how to do this is useless because it fails to explain that if you are already having the problem of not getting the "None" payment option with an Apple ID then you will need to create a completely new Apple ID.
    I had to do this 7 times since I bought my iPhone on Friday until this morning to figure out how to finally be able to use the Home Sharing option in iTunes to put my music collection on my brand new $500.00 iPhone. Pretty pathetic if you ask me but since it made me so angry I want to make sure other know how to do this so you don't get as upset as I did.
    #1 If your current or soon to be "old" Apple ID is not providing the option for "None" as a payment option then you need to make a brand new one. But you have to make it specifically how I tell you.
    #2 You will need to use an email address that has not already been used for anything related to a previous Apple ID. You might need to make a brand new email address.
    #3 Open iTunes, then open iTunes Store (upper right corner of iTunes).
    #4 Click on App Store (upper center of screen).
    #5 Scroll down the screen page until you see Top Free Apps on the right side.
    #6 Choose any one of the FREE apps.
    #7 You should either get the option to create a new Apple ID box, either that, or it will pop up with some kind of disclaimer and then it does the create new Apple ID.
    Either way just create a new Apple ID when it gives you the option to and then when you get to the page that looks like the payment page the "None" payment option will finally be available.
    Note: You will still have to fill out the information on the payment page. As long as you choose the "None" option it will not request any credit card information.
    #8 You will be sent a confirmation email to the new email account. Just follow through with what ever it tells you and viola now you can use your Apple Device.
    What a pain in the keester, eh?

  • Issues with photos/videos not uploading in chronological order..

    I have been having issues with Adobe Bridge not uploading my photo/video files (from a CF card) in chronological order. When uploading I select to rename the files by shot date + 01.. etc. For photos the first image then becomes the last image after uploading, and for video files everything is out of order. Not sure why as the only other thing I have selected to add is copyright info. Also having issues with Bridge not converting raw files to DNG (which has led me to use Adobe DNG Converter - not terrible, but hopefully there is a reason?). I think it is a problem with Bridge, as photos uploaded to my website - something completely non-Adobe related are also then thrown out of order.. so it seems to be an issue with files that have come through Bridge at some point. Any advice is much appreciated.

    I just noticed that iTunes is now accepting 'some' videos. They are all the same file type (mp4), but iTunes is just randomly choosing which videos it wants add to the Library & not.
    I'm still not getting any results when it comes to the Photos.
    ... and one last thing ... only random songs are displaying the album art on the iPod. Yhey ALL appear in iTunes. If i restore my iPod & re-load everything, some of the songs that DID have artwork appearing on the screen now don't.
    This is really messed up! Wonder if the eventual Vista-compatible iTunes will fix this problem ...

  • Running Mac 10.5.8 Updated to FF 8.0 - keeps crashing whenever FF opens - can not launch safe mode either - looks like many people here are having same issue - solutions all keep saying it ha.... see detail

    Running Mac 10.5.8 Updated to FF 8.0 - keeps crashing whenever FF opens - can not launch safe mode either - looks like many people here are having same issue - solutions all keep saying it has something to do with roboform 7.6.2 (which is for windows) or the profile. I have created new profile and updated the mac roboform - still no luck - have sent in MANY crash reports with no response ( one was Crash ID: bp-0eea6eb2-aba3-478a-bfb1-8f00d2111110 ) - anyone else find solution other than roboform or profile, or how do i get back to prior version?

    Any suggestions?
    My mail is still not functioning and crashes everytime I open it or check archived messages.

  • Crash issues with elements organizer while running Apple OS 10.9 Mavericks

    Crash issues with elements organizer while running Apple OS 10.9 Mavericks.  Crashes then ask if you want to reopen or not.  Also when you are trying to manuver the page with your mouse things go crazy from a full page edit back to viewing all photos on the site and skipping around from picture to picture.  Unsusable as it is today!

    It is very critical to delete all preferences when you do a major OS X upgrade. You need to go to your username>library>preferences and delete everything pertaining to PSE. To see that library in 10.9, open a finder window, click your user account in the list on the left (the little house with your name), and then click the gear wheel at the top of the window and choose View Options. At the bottom of the list of checkboxes you'll see Library. Turn it on and then you can easily find the preferences folder.

  • Sync issues with playlists. Not syncing playlists, and now my playlist have disappeared from iTunes. I am Using iTunes 11.1.3 and iOS 7.0.4

    Sync issues with playlists. Not syncing playlists, and now my playlist have disappeared from iTunes. I am Using iTunes 11.1.3 and iOS 7.0.4

    Hello surig84,
    Thank you for providing the details of the issue you are experiencing when syncing your iPad.  I recommend reviewing the following article specifically the section titled "Authorize using the correct account name."
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/ts1389
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

    I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

    I would first of all trash the preference file for InDesign, make sure the application is closed then find the prefs in
    /Users/USER NAME/Library/Preferences/Adobe InDesign and just throw the entire folder away, it will generate a new one after you launch InDesign again.
    Now launch InDesign and see if the problems are resolved.
    If not I would repair your permissions on your hard drive wih disk utility, and if that fails then di-install InDesign and re-install that single application.
    Let me know if any of these suggestions work for you
    I will be checking my email although you might have to wait for a response as I will be taking a microlight flight over the Victoria Falls tomorrow. Yay can hardly wait.

  • Has anyone had issues with their itunes not coming up?

    Has anyone had issues with their itunes not coming up?  I keep getting error message 13014.  I just bought a new classic ipod and am not sure if this is the problem.

    Hi
    Your new iPod has certain operating system requirements. Does your iMac meet those requirements?
    http://www.apple.com/ipodclassic/specs.html
    3rd Column on the right hand side, about a 3rd of the way down. To find out which version of iTunes you have, launch it and select "About iTunes" from the iTunes menu.
    HTH?
    Tony

  • Is anyone else having an issue with the iPad not charging if you use it while it's plugged into a power source?  Now that I'm on iOS 7, I either charge or use... Not both.

    Is anyone else having an issue with the iPad not charging if you use it while it's plugged into a power source?  Now that I'm on iOS 7, I either charge or use... Not both.

    No problems here.
    Edit...
    My IOS-7 is on an iPod Touch.

  • Connection issue with Gift Card

    Hi everybody,
    I have a problem when trying to connect to iTunes Store to redeem a gift card. Whenever I push button "use code" (please apologize for translation: I'm using the italian version), I get a message saying that iTunes Store could be busy and I should verify Internet connection.
    But when I run iTunes Diagnostics everything is OK.
    The issue won't happen (I think) if I buy a song normally.
    I'm using the newest version of iTunes (7.3.1.3) and I've de-activate Widnows Firewall but the problem still occurs.
    Do you have any suggestions?
    Thank you in advance
    Riccardo

    Hello there sam234,
    Gift cards are always awesome to purchase, and even better to receive! I’m sad to hear that you seem to be having continued issues with one you may have purchased from us. Generally speaking, we can usually resolve the issues with gift cards, especially if they are Best Buy gift cards.
    That being said, I am sending you a private message to gather further details about the $50 gift card you seem to be having troubles with. You may check your private messages by signing into the forum and clicking the envelope icon in the top right corner of the page.
    Sincerely, 
    Tasha|Social Media Specialist | Best Buy® Corporate
     Private Message

  • Exchange 2010 - Issues with Room Finder not showing available rooms.

    Hi,
    We are having issues with room finder not populating the room resources that are available inside a meeting request within outlook 2010. It also appears that there is a drop down box that is present in a lot of the other forums and pages that I have referenced
    for troubleshooting:
    Single Exchange 2010 server version 14.03.0224.002 running all roles. Migrated from previous Exchange 2003 environment and old 2003 server has been decommissioned.
    Room mailbox created and all configured resource policies are working correctly for creating meeting requests. A distribution group was created and the room mailboxes added to this DG as per instructions here: hxxp://exchangeserverpro.com/find-meeting-rooms/
    . We have recreated the OAB and confirmed that the Room mailboxes are part of this list.
    Does anyone have any ideas why the rooms are not showing up in the Room Finder box?
    If I have missed any information please feel free to ask for more info.
    Thanks, all help will be appreciated.

    Hi,
    According to your description, I understand that room finder cannot show available room in Outlook 2010.
    If I misunderstand you concern, please do not hesitate to let me know.
    I want to double confirm whether it works before, or it can’t work after decommission Exchange 2003? How about other Outlook version?
    The offline address book (OAB) is generated by Microsoft Exchange Server. In order for the Room Finder feature to work, the OAB must be generated by Exchange 2010 or a later version.
    Please run Get-OfflineAddressBook | FL Identity,Server to double check OAB generation server. Also, run Get-OabVirtualDirectory | FL to check URL for current OAB VD and force update OAB.
    Then open Test E-mail AutoConfiguration to double check whether Outlook get correct URL.
    After above complete, please try to switch to Send/Receive tab, click Send/Receive Groups, and then click Download Address Book.
    Thanks
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Allen Wang
    TechNet Community Support

  • We have been having some issues with Email notifications not going out and getting hung up in SOST.  Can anyone please tell me whether we can use Solution Manager to monitor outbound emails?

    We have been having some issues with Email Notifications not going out and getting hung up in SOST. Can anyone please tell me whether we can use SAP Solution Manager to monitor outbound email?

    What version of Solman are you using ?  Check in t-code Rz20 >ccms monitor template of satelliate system , there would be option to monitor your outbound mails .You can sutomise your monitorig metrics in solman 7.1  else in 7.01 you use auto reaction methods to monitor .
    Regards
    Jay

  • Anyone have an issue withe airplay button not being available?

    Anyone have an issue withe airplay button not being available?

    Since the last pair of updates, my game camera won't pan around in any adventure level, leaving many sub levels off screen.  This is happening in all community adventure levels as well as my own on my moon.  Also can't seem to decorate my adventure levels without experiencing major glitches, especially with changing the materials.  The updates fixed a lot of stuff, but it seems like they trashed some things too.

  • Having issues with your Card Readers in Windows 7 not working? Here's resolution!

    You do not need drivers for the card reader. There are NO Windows 7 drivers.
    (1.) Click on the Start button and then choose Control Panel.
    (2.) Click on the Administrative Tools a window will open.
    (3.) In the Administrative Tools window, double-click on the Computer Management
    (4.)  When Computer Management opens, click on Disk Management on the left side of the window, located under Storage. 
    (5.) This is where you will see Drives listed. The Card Reader will be listed as 1-4. Just right click & assign Drive Letter.
    Right click on each of the drives 1-4 and assign a Drive Letter. Now place your SD card in the correct slot and an a pop up for auto play will show. Now you reader works and will also show when you open COMPUTER it will show them as removable drives with proper drive letters. It took me several days to figure out after no help from HP or internet search. So when found the drives listed I just right clicked saw assign drive and it worked. Hope a lot of people searching on internet find this reply so that it will help them get there card reader working again under Windows 7 because even there tech's don't have an answer. Well good luck because this will work!!!

    owj wrote:
    I followed the steps but did not see drive 1, 2, 3, 4.  I see C; Jbackup drive, D: CD/DVD.  I'm still not able to get the card reader to recognize an inserted card.
    HP notebook 10''
    I'm having trouble with my card reader. I been thro steps mentioned in HP forum but only C:drive is listed .
    I had a problem with the hard drive earlier this year had to reinstall windows 7home premium from a disc unable to activate system restore.
    Ian Barrow

Maybe you are looking for