Create a pdf where the Bookmark Navigation Panel is always shown on start up

Hi all,
I have Acrobat 8.0 & InDesign 5.0.1.
I have created a .pdf with Bookmarks to aid navigation.
I would like the Bookmarks Navigation Panel to always show when pdf is opened in Adobe reader, not just on my machine but on everyone who recives the file - is this possible?
The reason for this is some users may not know to open the bookmark panel to aid navigation.
Thanks in advance all.
Alastair

Thanks Brend,
Worked perfectly. Some very useful settings in there as well.

Similar Messages

Cant create bookmarks in the bookmarks toolbar panel

Hi guys
I cannot create any bookmarks in the bookmarks toolbar panel. When ever I add a website to the bookmark toolbar panel, it is not displayed in the bookmarks toolbar panel. If I go to bookmarks menu and check under bookmarks toolbar, all the websites are there! I have attached links to the screenshots.
[IMG]http://i42.tinypic.com/33x7hjm.jpg[/IMG]
[IMG]http://i40.tinypic.com/21jds1w.jpg[/IMG]
Regards,
Anish

Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible.
*Firefox menu button > Options
*View > Toolbars (press F10 to display the menu bar)
*Right-click empty toolbar area
Use Toolbar Layout (Customize) to open the Customize window and set which toolbar items to display.
*check that "Bookmarks Toolbar items" is on the Bookmarks Toolbar
*if "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette into the Customize window to the Bookmarks Toolbar
*if missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
*if you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar setup
*https://support.mozilla.org/kb/How+to+customize+the+toolbar
*https://support.mozilla.org/kb/Back+and+forward+or+other+toolbar+items+are+missing
You can check for problems caused by a corrupted localstore.rdf file if the above didn't help.
*http://kb.mozillazine.org/Corrupt_localstore.rdf

Unable to anchor the "pages" or "bookmarks" navigation panel in acrobat v9.5.1

Hi All,
I am unable to anchor the "pages" or "bookmarks" navigation panel in acrobat v9.5.1. The "signatures" navigation panel is anchored but not the other two panels. I've tried repairing Acrobat, re-booting my Windows 7 64-bit system and the problem persists. This was working fine up until April of 2012.

That fixed the problem.
Thank you!

Where is Bookmarks Navigation Pane in Acrobat 9.3.4 Pro

I have done everything I can think of to get the bookmarks navigation pane icon in the nav panel the way it used to be, but the bookmarks dialogue box list just floats on the main page. How can I do this? Also if it only floats in this version of 9 Pro how can I reduce the width of the box showing the bookmarks?

View > Navigation Panels > Reset Panels

How to create a pdf with the correct size?

Hi there
How do I create a pdf with the correct size? I created several albums and ordered them. Now I want to backup the album and I know how to create a pdf, but when I choose A5 it's to big, when I create my own size it's not the size it should be. The original (made with iphoto) is a small size album 200x150mm. But when I create my own size (200x150) it shows some white borders.
Does anybody have some tips ore workarounds?
Yuri
Imac
Iphoto 11 (9.4.2)

Books are designed for and printed on 8.5 x 11 inch stock, US Letter size. You shouldn't have to select any size. While viewing the All Pages mode in the book Control-Click on the page and select Save Book as PDF from the contextual menu.
That will create a PDF that iPhoto uses to upload and print. Not all pages will be the same size as the dust jacket will be present in it's full size, 32.8 inches x 8.91 inches:
If you want a PDF that's designed for your own printing the type Command+P while viewing the All Pages window. In the first print window click on the PDF button. It will present you with a contextual menu where you should select Save as PDF. That will give you an 8.5 x 11 PDF file with all pages the same size.
OT

I am having problems interacting with Microsoft Office programs since the last update:cannot create a pdf through the 'print' menu in exel and both Word and Exel docs sent in Mac Mail end up being received as .dat files.

I am having problems interacting with Microsoft Office programs since the last update:cannot create a pdf through the 'print' menu in exel and both Word and Exel docs sent in Mac Mail end up being received as .dat files.
Both these situations have cropped up on my MacBook Pro since the last update.
Thanks for your help.
Cheers
Bob

The 'Winmail.dat' problem has been extensively covered in these forums, I would search for that (a Google search works well) and unfortunately I have not seen the pdf print problem before, but assuming the software is current and functions normally (other than the pdf print problem) I have no suggestion other than the obvious (but time consuming) re-installation of Office.
I wish I had more

Hola a todos , busco una manera de crear un pdf desde la impresora de ios, como lo puedo resolver, gracias. Hi all, I look for a way to create a PDF from the printer ios, as I can solve, thanks

Hi all, I look for a way to create a PDF from the printer ios, as I can solve, thanks

Try this process on your Mac. These files will be regenerated by Mac OS X with default settings.
1. Quit the Mac App Store
2. Trash the following folders and files; (~ is your Home folder)
~/Library/Caches/com.apple.appstore
~/Library/Caches/com.apple.storeagent
~/Library/Cookies/com.apple.appstore.plist
~/Library/Preferences/com.apple.appstore.plist
~/Library/Preferences/com.apple.storeagent.plist
~/Library/Preferences/com.apple.streagent.plist.lockfile
Mac HD/Library/Preferences/SystemConfiguration/networkinterfaces.plist
3. Restart your Mac
4. Open the Mac App Store
5. Log into your MAS account

When creating a PDF from the scanner, it only scans one side despite the settings.

When creating a PDF from the scanner, it only scans one side. I am using a fi-7160 that supports scanning both sides at once. The Scanner software is configured to scan both sides, and so are the presets in Adobe Acrobat Pro. I've only gotten the setting to work with the Custom Scan setting. Has anyone else had this problem, and what is the solution?
Additionally, the software bundled with the scanner with automatically omit the back sides of a page if it is blank. I am scanning large files with occasional double sided pages. Is there a way to avoid having to manually delete blank pages when creating a new PDF from the scanner? It takes twice as long because I'm using the OCR stabilization.

Hi anne,
Could you please let me know what Acrobat and OS version are you using.
Does this happen in case of any particular PDF or all PDF files?
Try repairing Acrobat and then again check.
Hope to get your response.
Regards,
Anubha

Problem creating a PDF from the "print view" of a web page

When creating a PDF from the "print view" of a web page, the features in the print dialog box overlap. When the PDF is created, the words are garbled. e.g. words apppear as jzhhhxxf or zxihcj.

Use a job settings that embeds the fonts. If you look at the PDF, the font properties probably do not look correct and don't include embedded fonts. Also, set the printer to Adobe PDF before you try to do a print, so that the web page can try to properly adjust to the printer.
Why not just try opening the web site directly in Acrobat?

Creating a button in the bookmark bar

Hi all,
I want to create a button in the Bookmarks bar. Instead of going to view->text Encoding->UTF-8, that button can change the encoding to UTF-8 directly.
Is it possible in Safari?
Regards,
Omar

Whats up....
it is only a matter of a button. i don't think that this thing is hard.

HT2506 Is there any way to view a signed PDF where the signed uses Windows/Adobe and I am viewing it preview?...I do not see the signature in "signed" docs

Is there any way to view a signed PDF where the signed uses Windows/Adobe and I am viewing it preview?...I do not see the signature in "signed" docs

I have already reinstalled both Adobe Reader and the full version of CS5 which includes Adobe Pro. Neither of those steps worked.
Thanks,
GiGi

Pages 5.0: Where is the Bookmarks/Hyperlinks panel?!

I swear I've looked everywhere. I hate the new "inspector" window. I need the bookmarks/hyperlinks/etc panel. I do documenting work for a couple of elderly couples, and I need to have a "table of contents" with hyperlinks to positions in the document. (Trust me, there's no way of teach all but one of them any other way.)
Please help!
If it's possible to revert to Pages 09, that'd be lovely. I don't have iWork or anything, I don't think. I just bought Pages off of the App Store on my MacBook Pro.

Apple has removed bookmarks along with over 90+ features in Pages 5.
The hyperlinks aree largely broken and buggy.
If you had it before Pages '09 should still be in your Applications/iWork folder.
Peter

How to create a pdf for the URL attached to an invoice and send it as an attachment in a mail

HI,
I have requirement where i need to get the URL attached to an invoice, create the pdf and send as an attachement in a mail.
The URL attached to an invoice can be seen by following the path : VF03-> Billing document->system->Services for object ->Attachement list.
On searching through existing forums, i found that there is a table 'SRGBTBREL' which stores relationships of GOS object. On giving the invoice number in field 'INSTID_A', i could find an entry in this table.
To get the content, i used the class CL_FITV_GOS, method GET_CONTENT. To this method i passed following values:
IV_ATTA_ID = FOL21000000000521URL39000000000012 (The value if field INSTID_B from table SRGBTBREL)
IV_OBJTP   = 'URL'
On execution, i get URL link but the content table is empty.
Could anybody provide some input on how i get the content? Or may be how i can create pdf from the URL link and attach it to mail as an attachment?
Thanks,

Hi Amit,
Solution provided by you is working when the link length is one line but it is not working for more than one line
Eg: say link is https://......80 [80 characters long]
I will give    <a href="https://...72            [in first line]
                 73..80">click here</a>         [in second line]
I will get the output as 73...80">click here
But i want only CLICK HERE in my output..
Please suggest solution.
Thanks,
Kavya

Why have you removed the bookmarks side panel button? This is THE most important feature of firefox.

Since last update of firefox, the button to open the side bar bookmarks have been removed (ctrl+B) equivalent.
I don't want to do a ctrl+B command in a graphical interface that I use so often. There is no good enough extension for that task.
This is THE reason I used firefox since the begining.
I have gazillions of bookmarks cleanly ordered since YEARS of web browsing. This is the way I use internet. If I have a project I create a folder and I put every interesting links I want to remember in it. There is no way to do that in a dropdown menu which close at every click.
I know people who use chrome and keep up to 60 tab open just to remember what they need.
I just spent half a day searching for proper extension in chrome and opera.
I feel so frustrated and powerless in front of browser developpement, I have to tell it. I would gladly pay 20$ per year to keep that function there, a single button sending ctrl+B command, so simple and already coded.
Firefox was my only browser for years, I leave you with that. Now I'm going to download and try the new internet explorer.

You can find the link to open the bookmarks in the sidebar at the top of the bookmark menu button list that opens if you click the folder button (Show your bookmarks) next to the bookmarks star on the Navigation Toolbar.
You can look at the Classic Theme Restorer extension to restore some functionality that was lost with the arrival of the Australis style in Firefox 29.
*Classic Theme Restorer: https://addons.mozilla.org/firefox/addon/classicthemerestorer/
*You can check out the settings of the CTR extension via its Options/Preferences button on the "Firefox/Tools > Add-ons > Extensions" page.
*You can find extra toolbar buttons and more toolbar settings in Customize (3-bar Firefox menu button > Customize)
In current Firefox releases (29 and later), that have have the Australis user interface, the orange Firefox menu button has been replaced by the three-bar Firefox Menu button at the far right end of the Navigation Toolbar and this button is always visible, whether you have the menu bar visible or hidden<br>A consequence of this location is that you no longer can hide the Navigation Toolbar
*There is a star like button next to the search bar on the Navigation Toolbar to bookmark the current web page and a "Show your bookmarks" button next to it to open the Bookmarks in a drop down menu.<br>You can find "Show All Bookmarks" to open the Bookmarks Manager (Library) at the bottom of this drop-down list
*If you bookmark a page then "Bookmark This Page" in the Bookmarks menu changes to "Edit This Bookmark"
*You can make the title bar visible via the "Title Bar" button at the bottom left in the Customize palette window
It is still possible to have the menu bar visible via the right-click context menu of a toolbar to have menus like the File menu with Print (Ctrl+P) and Print Preview and the Bookmarks menu available.
See also:
*https://support.mozilla.org/kb/how-to-make-new-firefox-look-like-old-firefox
*https://support.mozilla.org/kb/common-questions-after-updating-to-new-firefox
*https://support.mozilla.org/kb/learn-more-about-the-design-of-new-firefox

Creating New Layout with 'Expand/Reduce Navigation Panel'

Hi All,
Please let me know can we create layout having the feature of' 'Expand/Reduce Navigation Panel'. If yes, point me to the steps to be followed or resources which explain these steps.
Regards,
Ganga

You should download the .par file of the existing Detailed Navigation iview and import that into NWDS. Then you can modify that and create a new .par file to upload into your portal. Create an iview from the new app.
Create a copy of the default framework page and edit the Desktop inner page and insert the new iview in place of the standard one.

Create a pdf where the Bookmark Navigation Panel is always shown on start up

Similar Messages

Maybe you are looking for