Create button not enabled in JCO Connections tab???

Hi all,
I have developed an appl that can connect to R/3 and retrieve the results from R/3.
In my http://sssvb:50000/index.html->
Webdynpro->Conent administration->local->myapp
I see that create button is not enabled, what to do?
How to enable that?
Please help me,
Regards,
Ganesh

Hi Rajit,
When i click on Check SLD Connection, it is not allowing me to enter the params(disabled). It contains some default params like for
Host Name:.........
port:-1
User:........
URL:http://-1/sld
When i click on StartSLD the result is "Page cannot be found", and when iclick on TestConnection, the result is
"SLD Could not be opened succesfully".
Also Create JCo Destination, Maintain JCoDestinations, Start Assigned SLDs are disabled.
How to rectify all these errors.
Thanks in advance.

Similar Messages

Buttons not enabling for JCO Creation in SLD

Hi Experts,
When i logged in into my Webdynpro Content Administrator with administrative rights, all the button like Create JCo Destination, Maintain JCo Destination and Start assigned SLD are getting disabled expect Check SLD Connection Button.
Moreover, displaying a message : "Connection to System Landscape Directory (SLD) could not be opended successfully." at the bottom of the screen.
When i click on the Check SLD Connection Button and then Test Connection, it gives again the same message i.e "Connection to System Landscape Directory (SLD) could not be opended successfully."
Now, When i click on the Check SLD Connection Button and then Start SLD, SLD server is staring and running.
Another thing is, When i am starting my sld server from logging in into http://<hostname>:<port>/sld, SERVER status is running. I stopped it and again started, then it is starting, but giving an error message as:
"Failed to send start signal for complete cluster, SLD may still be stopped on other cluster nodes."
When saving any parameters like profile information, it is not saving and saying error as:"
Cannot save profile settings CIM_ERR_FAILED: Failed to initialize cluster notification sender."
My setting are correct in SLD Data Supplier in Visual Administrator. I had filled the host/port/user/password information for both "HTTP Settings" and "CIM Client Generation Settings".
It went worked well earlier, i come across this problem recently with my sld.
Another thing that i noticed is when i click on the "CIMClient Test" button, its getting an error message saying "Failed to Generate and Test CIMOMClient Object". But, ealier it came as successfull.
I have full authorization to use admin tools.
What might be the problem.
any help must be appreciated.
regards
sunil kumar

Hi Sunil,
We just had this issue couple of days before, this has to do with the JMS Provider Authorization. We did the following steps to solve our issue:
I. Default security configuration of JMS resources is in place (this is by far the most common scenario) and named anonymous users have been created.
Change the mapping of the "clients" jms role as follows:
1. Start the Visual Admin
2. Browse the tree in the left pane
<SID> -> Server 0 -> Services -> Security Provider
3. The "Policy Configurations" tab should be selected by default on the right hand side
4. Select the "service.jms.default.authorization" node from the "Components" list (should be the nineth entry from the top down)
5. Select the "Security Roles" tab
6. Select the "clients" node from the security roles list
7. You should see on the right hand side "Security Roles" list in which the "guests" node is marked
8. Switch to edit mode by pressing the change button on top (pencil icon). The "Modify" button should now become active
9. Press the "Modify" button
10.Select the "all" entry from the "Security Roles" list. The "Groups" pane should show one entry named "Everyone"
11. Press the "Save" button
12. Restart the cluster so that JMS and applications using it can reliably reinitialize.
Check
Note 971249 - JMSServerSecurityException thrown accessing JMS resources
for more details.
Hope this helps!
Regards,
Preetha Rethinam

JCO - Get meta data - Grey status in JCO connections tab

Hi all,
I read many post on this topics within this forum but I didn't succeed to get meta data required and to set correctly my connection.
Let's start quickly to give you my conf
In the j2ee admin
-> Services > SLD Data Supplier > CIM Client Generation Settings
I set fields with : SLD7000 / 50000 and my logon info
Save and test -> result is ok !
In my web dynpro application, I am able to get correct BAPI from BCE system using my logon info. And I map my view to display data from the corresponding BAPI called.
So at this time, in my IDE, the connection to the SAP Backend system SAP works because I can get the list of BAPIs from the BCE SAP Backend System as well.
Build and deploy my application.
Now, let's go to webdynpro welcome page on my j2ee server : http://<host>:<port>/webdynpro/welcome
-> content administration
-> I select from the left tree browser my application, and open the "JCO Connections" Tab. I can see my connections previously I set in my webdynpro application. But I CAN'T use the button "Create" to configure new JCO connection. ??
Last thing:
in the BCE backend system
transaction : RZ70
I have, host = sldmain and service = sapgw47
Also, in the list of data collection programs, everything is checked as active except the program "_SLD_RFC"
I don't know if it is important....?
Finally, I give you from the exception I got in my browser only lines "Caused by"....
Caused by: com.sap.dictionary.runtime.DdException: TypeBroker failed to access SLD: Error while obtaining JCO connection.
Caused by: com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscapeException: Error while obtaining JCO connection.
Caused by: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to create J2EE cluster node in SLD for 'J2E.SystemHome.localhost': com.sap.lcr.api.cimclient.LcrException: CIM_ERR_NOT_FOUND: No such instance: SAP_J2EEEngineCluster.CreationClassName="SAP_J2EEEngineCluster",Name="J2E.SystemHome.localhost"
Thanks a lot for your support and help,
Best regards,
Emmanuel.

Hi Emmanuel
You said
" I select from the left tree browser my application, and open the "JCO Connections" Tab. I can see my connections previously I set in my webdynpro application. But I CAN'T use the button "Create" to configure new JCO connection. ??"
What is their status ? Is it green on red? Usually create is greyed out if it is green. What about Edit?
Try creating a new Web Dynpro component with another destination name ,deploy and then check the Content administrator if these new destinations have Create enabled
After running RZ70 did you check the Technical System in SLD administration to see if the technical details have been propogated ?
Regards
Pran

Create Notification Navigation Button not working in Order Objects Tab

Hi Gurus,
I am having an issue in Order --> Objects tab. I want to create notification for additional technical objects for the order. When I enter the technical object details and press enter, a "Create Notification" navigation button gets activated for that line item. But when I press that button, nothing happens. On the other hand if a select multiple line items and then press "Create Notification" button at the bottom of the line items, I am able to create notifications for the selected line items.
Can someone help me suggest what can be the problem or suggest a Note which might restore the functionality of the "Create Notification" navigation button at the line item level.
Thanks in advance for the help.
Best Regards
Vikas Hali

Vishal,
I dont think the Notification Create Button from line item is pretty much dependent on the Customization Settings or any sap note concerning this has not been as yet brought into my notice. In my system, this is working appropriately. The problem with this which i can think of is either an authorization issue or you should raise an oss for this.
Regards,
Usman

Test button not enabled in Display Template...

Hi,
I created a query template then created a display template using that query. If i want to test that output then the Test button is not getting enabled. But if i use dynamic page generator or applet its working I am able to see the graph. Also Test button working in query template, only thing its not enable in Display Template.
Thanks in Advance,
Murugappan.

Another method of quickly seeing changes to a display template is to use the Dynamic Page Generator accessed via the main xMII Menu under Visualisation Services > Dynamic Page Generator.
Once there, pick the Query Template you are going to use from the top pair of applets, and use the bottom pair to select the Display Template you wish to "preview". Make sure that the Query Template is configured with default parameter values (i.e. that it returns good data when pressing "Test" immediately after opening it in the Query Template editor).
Then, press the Generate Image button to have xMII run the query, pass the results to the selected Display Template and render the result as an image. Because the image name is random, it won't be cached by your browser, and you will be able to see changes to Display Templates without clearing your browser cache/restarting your browser.

OAM buttons not enabled from oamconsole 11.1.1.7

Hi Guys,
I am facing issue while trying to create Host identifier from OAM console. Some of the options are not enabled to create new application domain in oam 11.1.1.7
Issues faced till now :
1- While creating host identifier from oamconsole. it is not showing + button option to add url and port.
2- Created application domain form oamconsole but while adding resources new resource creation button is disabled.
I have checked options under authentication policy and authorization policy and it is showing + button as enabled and also allowing to add things.
This is a new setup created with following details :
1- OS - Enterprise Linux 5.
2- IDM 11.1.1.7 including SOA 11.1.1.7
3- Intgrated OAM with OID.
4- OHS 11g (11.1.1.7) proxied in front of weblogic server.
Whole setup is working fine as per expectation except this issues which I am facing in oamconsole.
Also created oamadmin and oamadministrator user and group for with below details.
cn: oamadmin
sn: oamadmin
description: oamadmin
uid: oamadmin
objectclass: top
objectclass: person
objectclass: organizationalPerson
objectclass: inetorgperson
objectclass: orcluser
objectclass: orcluserV2
userpassword: mypasswd
oam_group.ldif
cn: OAMAdministrator
displayname: OAMAdministrator
description: OAMAdministrator
objectclass: top
objectclass: groupofuniquenames
objectclass: orclgroup
Is it something related to any permissions issue of oamadmin user that these options are not enabled
Thanks.

Try the steps in this tech note and let me know the result
OAM 11.1.1.5.0 Console Requires Admin Role To View Available Services (Doc ID 1513645.1)

Delete button not enabled on Inbox Search List

We are using CRM 2007 sp4. In one of our Web Interaction Centers we want to allow certain end users the ability to delete certain transactions from the inbox search list. At present when an item in the result list on the inbox [Component ICCMP_INBOX (Inbox Items)] the delete button is not enabled whilst the Edit, Display and Interact are all enabled. how do we enable the delete button.
Thanks in advance

Hey corrines,
Here is an article for you that will help you troubleshoot this issue with your keyboard:
One or more keys on the keyboard do not respond
http://support.apple.com/kb/TS1381
Take care, and thanks for visiting the Apple Support Communities.
-Braden

JCO connection tab in disabled mode in sap J2EE engine/webdynpro/local/proj

Dear all,
I'm developing the simple webdynpro object using netweaver developer studio, but when i deploy it to sap J2ee engine and go there to set the JCO connection, I find the jco connectiuon tab in the diabled mode. I need to configure the new jco connection in order to run the project. Please suggest.
thanks,
Anup.

Hi Anup,
You can find service "SLD data supplier" under server->services list.
Refer following links for configuring SLD and JCO connections:
Re: Web Dynpro - Problem with (SLD) JCO Connection
Re: Configuration of SLD
Regards,
Bhavik

Create button to stop loading all other tabs.

Hello. Can you create a button to stop loading all other tabs. I know you have buttons for: reload all tabs, and close all other tabs, but stopping all other tabs would be great too.
For example:
opening new tabs on eBay, they constantly load and make mozilla slower to work with. If I can stop all other tabs from loading, I can browse the main page faster and open even more tabs faster.
This button would be very useful. Consider it. =)

The OP wants to open a lot of links quickly after each other in the background, but would want to delay the actual loading until going to a specific tab. 
When you restore a previous session only at most three tabs load at the same time if restoring on demand isn't selected (active), but I don't know if you can achieve this with opening a lot of links.
Maybe one of these help:
*Absolute Load Control: https://addons.mozilla.org/firefox/addon/absolute-load-control/
*Load Tabs Progressively: https://addons.mozilla.org/firefox/addon/load-tabs-progressively/
*BarTab Lite: https://addons.mozilla.org/firefox/addon/bartab-lite/

Create Item button not enabled in Personalization page

Hi All,
In one of the OA pages, I clicked "Personalize Page" icon and went to the personalization page. The following columns are not present in that page:
Create Item
Update Item
Delete Item
So I m not able to create any new items through personalization.
Let me know if someone has idea abt this.
Regards,
Pradeep

Hey Gyan,
Thanks.. After changing the profile option I m able to see the create item and update item icons in the personalization page.
Could you also please tell the impact of changing the profile?
Thanks,
Pradeep

Back button not enabled in Knowledge Check

How can I have the back button enabled in a Knowledge Check. We want the user to be able to move back to a previous slide, if necessary. I am using Captivate 8.
Thanks, in advance.

I suspect you mean a pretest slide? Navigation is disabled when onderging
pretest slides. Use normal question slides, and do not add their score to
quiz total or create custom question slides.

Adobe Reader XI - Save button not enabled in Firefox 19, 20, 21

This problem only seems to occur in Firefox. IE9 and Chrome 20+ seem to behave properly. We have customers complaining that they are having a difficult time figuring out how to save PDF files from our scientific research web application. While, cntrl-shift-s and File->Save As are still available to them, they are confused that the "Save" icon that appears on the reader is greyed out.
I had read the following blog post concerning the problem involving URLs with over 259 characters.
http://blogs.adobe.com/dmcmahon/page/3/
While our URLs are long and they are cgi-based in format, they didn't quite make it to 259 characters.
I took our code base and created a very short path-based URL, removing special characters, such as periods and hyphens from the file name, and making sure that the tail of the URL contained the name of the pdf file, and the save icon was still greyed out.
Installing Adobe Reader 9.5, and 10.0.4 seemed to exhibit the same behavior in Firefox.
Are there currently any known issues with how Adobe Reader behaves with Firefox?
Are there any possible work-arounds?
Thanks in advance.

Thanks for the screenshot, Pat. I think the light bulb went off for me. I was looking over the tips for configuring Firefox at the link:
http://helpx.adobe.com/acrobat/using/display-pdf-browser-acrobat-xi.html
And I think what confused me the most was this screen shot for plug-ins for Firefox mentioned Acrobat.
I had Acrobat installed myself, but most of our users do not use Acrobat, since it's not a free product. I uninstalled Adobe Acrobat, and the Adobe Acrobat plug-in was still there, so that forced me to realize that the plug-in that comes with Adobe Reader 11.0.3 is called "Adobe Acrobat".
I went into Tools->Options->Applications and selected "Use Adobe Acrobat (in Firefox)", rather than "Use Adobe Reader (default)".
This now allows me to not only view PDFs within a browser window in Firefox, but it also enables the save icon (which "Use Adobe Reader (default)" was not allowing me to do:
It's a shame that the default setting is not for "in browser", because our customers may have to make a configuration change.
There is no way to programmatically force a configuration change on a user's browser, is there?

Buttons not working; then losing connectivity on certain apps, but the browser continues to work

For Torch 9800: only the touch screen buttons are working. The entire keypad and the top 5 buttons (menu, send, etc) were not working. I did several battery pulls and it finally started working. However BBM, FB, WhatsApp, BB App Store stopped working, but the web browser was still working, so it was not a connectivity problem. Then the keyboard problem started again. I did another battery pull and is started working again, but still to access to FB, BBM or Whatsapp, App word. Please help.

Hi and Welcome to the Community!
Wow...lots of problems there...and impossible, without some significant diagnostics, to deduce just what the culprit it. It could be hardware, it could be software, it could be moisture intrusion, it could be other things, it could be a combination of things.
So, first off, do you at all suspect moisture intrusion? If so, then
REMOVE YOUR BB BATTERY NOW!!!
Run, don't walk, to this FAQ:
http://www.blackberryfaq.com/index.php/Got_Your_BlackBerry_Wet%3F
Do everything it says, including waiting the maximum recommended time. Applying power to your BB between it getting wet and doing this process reduces the chances of success. Further, the only thing predictable about moisture intrusion into a BB (indeed, any electronic device) is that the results will be unpredictable. I've seen some come back up right away and be fine. I've seen others never work at all. I've seen still others run for a bit, and then die later. And every thing in between.
If you are 100% certain of no possibility, even remote, of moisture intrusion and/or you have done the above and there is no change, then the next thing to try is a clean OS reload. What I suggest actually is to reload your OS clean -- as "bare bones" as possible...no add-on apps, no extra things, no themes, truly bare bones. Then, if the behavior immediately presents, you can stop as you then know that it's either hardware or un-fixable moisture intrusion. On the other hand, if the behavior does not immediately present, then run like that for perhaps a week...long enough to be convinced that the behavior will not recur. Then, after that week, add just one thing...only one, no matter how tempting it is to add more. Run again for another week if the behavior does not present. Once the behavior does present, you know your culprit! I realize this is tedious, but you have a special problem, and special diagnostics are IMHO required.
So, to do that OS reload, at the top of each device forum, there should be some "sticky" threads that discuss the OS levels available for many models. If they include your model, then please use those as reference as you proceed. Otherwise, you will have to dig through the official download portal for OS packages for your model:
http://us.blackberry.com/support/downloads/download_sites.jsp
From a PC, you can install any compatible (e.g., for your exact BB Model Number) OS package to a BB via this procedure:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC. You can even use a different carriers OS package by simply inserting, between steps 1 and 2, the deletion, on your PC, of a file named VENDOR.XML. Be sure that you remove, from your PC, any other BB device OS packages as having more than one installed to the PC can cause conflicts with this procedure.
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

PDF button not enabled in Print dialog box

When I am in any application that allows printing and I select File > Print, the Print dialog box opens, but I can't select the PDF button (or the Preview button for that matter). I can see the buttons, but they are not selectable.
I have a $HOME/Library/PDF Services folder set up properly.
How can I enable the PDF button for printing?
(And for the quinella, the Preview button in the same dialog box.)

I am sorry my post got corrupted as these new Discussions format modifications can muck up when using the ~ (tilde) symbol. !!!!!
What I wanted you to do was go to the Home folder, then Library, then Preferences and locate two files,
com.apple.print.custompresets.plist
com.apple.Preview.plist
and delete those two files in particular, not your document that you are trying to preview. My mistake for omitting this information.
So please try this suggestion.
regards roam

FAX button not working on HP Connect site for HP Officejet All-in-One 4630

I can send a fax using the printer, but cannot send a fax from the computer using the HP Connect page. It was working before. I can use fax set up wizard, manage fax settings but not send a fax button. It stopped working all of a sudden. EHW

Hi EHW,
Welcome back to the HP Support Forums! I see you are able to send a fax from the front panel of your HP Officejet 4630, but when you attempt to use the HP Printer Assistant to send a fax the fax option is now greyed out.
I would first like you to make sure the printer's Firmware is up to date, please click on the link below to get started:
HP Officejet 4630 e-All-in-One Printer series Firmware Update
Once you have updated the Firmware, try and open up the HP Printer Assistant, are you now able to choose the Fax option?
If not, continue here and run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Are you able to fax from the HP Printer Assistant, if you still have problems leave me with the following information:
1. What is your current Operating system, Windows or Mac and which version?
2. How is the printer connected, USB or Wireless?
3. Have you made any changes or updates to the computer?
Please let me know the results, I will watch for your reply.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Create button not enabled in JCO Connections tab???

Similar Messages

Maybe you are looking for