Create Customize Hierarchy in BW

Hi All,
As per my requirement i have to create a customize hierarchy in SAP BW system, could one please suggest me how to create customize hierarchy in BW system.
I know that in R/3 by using BW07 and BW10 we can create the Hierarchy by using Z or on standard table we can create, but my requirement is to create in BW.
A big please to everyone to respond ASAP with possibilities.
thanks,
p

Hi Prashanth,
To create hierachy in BW/BI , First of all you need to make the characterstic 'With hierarchies'
Right click on the characterstic(Z_SREP, for example) --> Change
Go to Hierarchy Tab ---> check 'With hierarchies' check box
activate the characterstic
then right click on the same characterstic and say Create Hierarchy
Enter a name and a description, and then click continue
Right-click charactersctic or the right hand side area , and then select Insert characteristic node--> Insert info object ( Z_SREP) u2026. and so on...
Let me know if you want to know more in detail,
Hope this helps.
Sukhi

Similar Messages

Customize Hierarchy from Infoview

Dear all,
I've to set customize Hierarchy at report level. I already set Hierarchy at universe and select all Hierarchy objects at report level.
So all the selected Hierarchy objects are available in "Drill by" menu in a report. But i want to keep only those objects in "Drill by" menu which has some special data (like, Country not equal NULL). So i must take decision dynamically that which objects should be in "Drill by" list after analyzing data.
So is it possible to take decision from InfoView/Report level that which would be my Hierarchy? Or is it possible to overwrite the Hierarchy(set at Universe level) at report level after analyzing data?
Thanx in advance...
Nahid
Edited by: nahid bd on Nov 25, 2009 8:41 AM

Hi,
please check if the flow you created is BI 7 or BI 3.x you can see this by look for a small square behind the datasource name.
Since you are able to look in PSA i expect it to be BI7 flow which (no square in above mentioned place) means you need to check your infopackage to see if it is loading to PSA only or also to infoobject. If its loading only to PSA you either need to create a DTP and run that aswell or change the setting in the IP
Hope this helped.
C.

Creating Vendor Hierarchy?

Dear BWers,
I need to create a Hierarchy in BW for Vendor that is based on table LFMH. Can anybody please guide me through the steps of creating the datasource in R/3 for a hierarchy. Also is 0VENDOR_LKLS_HIER based on LFMH? How do i find that? Thanks for all the help.
Raj
Message was edited by: Raj Singh

Dinesh,
The second link seems to be right for me for creating a custom datasource for a hierarchy in R/3 for 0VENDOR. Can you please describe this procedure for doing this in R/3? Also can i customize the available datasource 0VENDOR_LKLS_HIER so that it takes data from table LFMH which is the vendor hierarchy table in R/3.
The procedure suggested in the second link by you:
Sice you do not have any hierarchies available you would need to build the hierarchy using a function module extractor. In the extractor you need to populate the parent nodes, child nodes, intervals, etc from any table/view. You would use the Type Group "RSAP" for creating the hierarchy.
Thanks
Raj
Message was edited by: Raj Singh

How to create BP hierarchy in CRM 5.0

Hi All,
We are planning to create customer hierarchy in our SAP CRM 5.0 system. In other words, we want to have different departments within a company to be identified as a BP while the company itself is also a BP. How to implement this in CRM?
Greatly appreciated,
Leon

Hi Leon,
Creating a BP group (customer) hierarchy in CRM system is very easy. Please refer to the following very good help document : http://help.sap.com/saphelp_crm50/helpdata/en/12/cfea3b31aac554e10000000a114084/frameset.htm
But in CRM 5.0 every time you create a hierarchy node and saves it, then hierarchy automatically get disappears. You need to implement the following notes in your system to get rid of this problem : 958122, 960384 and 956066
<b>Do not forget to reward if helps</b>
Regards,
Paul Kondaveeti

Can we create a hierarchy based on two logical table in 10g RPD

Hi,
I have a question, please give me some clarity, about creating hierarchy,
I know we can create a hierarchy based on one logical table which is form by two physical table...
Can we create a hierarchy based on two logical table? If yes, and how?
Thanks in advance!
anne

Use preffered drill paths...
-suman

Creating a hierarchy based on a remote database link

I am trying to create a hierarchy based on a synonym for a remote database table. The hierarchy wizard works correctly, and the table columns do appear as choices in the drop boxes. However, when I try to run the application, I get the error "No data found. This data does not exist or you do not have privileges to view it". Does anyone know how to resolve this error? Or how to work around this?
I can successfully create and query a form based on the remote table. And, I am able to create a hierarchy from other tables (which do not use a database link) without a problem.
Thanks for your help!

This is the query which I am using to build a report
SELECT
rollup_timestamp "Date",
max(decode(target_guid,'199F0B201A3D71A63040BADFAA4F9E90',average,0)) host1,
max(decode(target_guid,'3FB1329F59339C07E11304B69DC4E594',average,0)) host2
FROM "sysman.MGMT$METRIC_DAILY"
WHERE
(target_guid='199F0B201A3D71A63040BADFAA4F9E90'
or
target_guid='3FB1329F59339C07E11304B69DC4E594')
AND
metric_name='Load'
AND
metric_column='memUsedPct'
AND
rollup_timestamp >= to_date('01-10-2009','dd-mm-yyyy') and rollup_timestamp <= sysdate
GROUP BY rollup_timestamp
ORDER BY "Date"
And for your previous question I couldn't even create a page.
Regards
Balaji
Edited by: user7290747 on 6/01/2010 16:17

How to create a hierarchy Tree

Oracle Forms 6i
Hai All
Could Any Tell me the steps to create a hierarchy tree in oracle forms
My table is employee_master and fields are
Empcode number ,
Empname varchar,
deptcode number,
gradecode number and etc
Here i need to create a tree with Deptcode in that every employees are seperated by grade code
Thanks In Advance
Srikkanth.M

Dear,
If you get any problem while creating tree, will help you step by step.....
Thank you,

How to create a Hierarchy Node Variable to be used in Infopackages ?

Hello,
I use BW 3.5.
I need to create a hierarchy node variable (filter) to be used further in Infopackages as OLAP Variable.
How can I do ?
Please give a step-by-step answer,
Thank you very much,
Thomas

Hi Again,
You can use ABAP program in the process chain.
I guess there are some OS level commands in ABAP which will allow you to open, close, read , write and move files.
Serach in ABAP help or on net.
Bes regards,
Sunmit.

How to create a hierarchy info source

Please give a step by step procrdure of how to create a hierarchy info source

Hi,
Check this blog:
Hierarchy Upload from Flat files
Bye
Dinesh

Creating a Hierarchy Viewer query

Hello,
I'm having huge difficulties creating a Hierarchy Viewer Query. I've looked through the source code contained withing the demo, but it seems to require great knowledge regarding the component. I'm using a three-node model, each node grouped within it's parent.
So I created a custom View to be used as a result list for the query and this part is working just fine. I can pick the unique ID for the node I want from the search results when the user selects one, but I don't know how I can make that specific node my "anchor", my "current node", after that.
Since I'm looking for a specific "contact_id" selected from the search results, I think the correct way of doing it is finding it's node on the TreeModel, and then setting it as my current anchor.
Please, any tips, directions or suggestions on how can I go about doing this?
Thanks!!

Hi!
Thanks for the attention, but I've been through all the basic stuff. The HV documentation only teaches the most primitive part of it. I searched all blogs related to HV, all articles I could find, I've meddled with the demo source code and all I can think of, but I couldn't find anyone who would give much insight on the mechanics of the component or how to build a really powerful search engine for it.
As a sugestion for the developer team, it would be great if the query for this component allowed us to specify actions to be performed on all levels of the tree, instead of only the root node, since most of the time people use HV as a multi-root tree.

Unable to create position hierarchy in organization model

I was unable to create position hierarchy in organizational hierarchy. I want to maintain position hierarchy within an organization. But SAP CRM is not allowing that. I was able to create organizational hierarchy. Please let me know, how can I maintain the position hierarchy within the same organization?
--hari

Hi hari,
it is only possible to have a hierarchy with two levels on position level. Therefore you create two positions below your organization (tx ppoma_crm). At one of these positions you set the flag "Head of own organizational unit" at the Basic data tab of the position (To see this, you need to display the Details of the positions at the bottom of the screen). Now you can assign a business partner (or more) to this position which is (are) the Head of this unit.
If you need a more complex hierarchy you have to use organizations to show this.
Hope it helps!
Kind regards
Christian

How to create an Hierarchy from 2 tables in Essbase

Hi,
Currently We have 5 dimension tables and one fact table in Star Schema Model.We have requirement to create an hierarchy which pulls from multiple tables
For Eg:
Table:1 P1 P2
Table:2 Q1 Q2
Expected Hierarchy :
P1
Q1
While we try to implement it shows inconsistent results.Can some one let me know the alterante solution to fulfill this requirement.
Thanks,
SatyaB

Your JOIN doesn't work?
You'd have to post what the tables look like, what you're joining on, etc., etc. You aren't supplying enough information.
I am (to put it kindly) a SQL hack. I have found that if I go to a company's dba with my childlike SQL and ask, "Can you improve this?" almost 100% of the time they take pity on me and improve my code to no end. I know that's not what a dba is really for, but they tend to like well formed SQL touching their databases. Failing that, is there someone at your firm that is good with SQL who can help? You're on an Essbase board, not a SQL board, so you are likely not going to get the help you need here.
Regards,
Cameron Lackpour

How to Create New Hierarchy and Group Codes

Hi,
I have a requirement for create New Hierarchy Code and Group Codes...
Please let me know the procedure of it..
Thanks...

solved

Creating A hierarchy on a characteristic.

Hi,
I am in process of creating a hierarchy. the problem I face is with number of hits getting displayed in the input help. I have got an overall of morethan 1500 entries, but the input help is giving me only 500 hits at a time.
How can I get the full list of input help.
Regards,
Naveen.A

When you have the list of value, choese restrict value botton and you can choose the number of hit to select.
Regards

Create a Hierarchy

I am having a sql which has invoice date and has a index on it. I need to put parameter on this column but the user wants to enter only period name.
So if you create a hierarchy on this date column I know that performance will be really bad.
I read that if we create a dimension table and attach this to that the performance retains. Can any body explain how to create dimension folder and create a hierarchy on that, how to attach that to complex folder and make a parameter on that.
thanks in advance.
thanks
kiran

Hi Kiran
I have been waiting to answer this one so that I have some time to devote to the answer, not because I don't know what to do but because the answer will be time consuming.
Basically, the steps involved are:
1. Determine what your fiscal periods are
2. Determine what time components you want to report on
3. Build a table that would store those components
4. Populate the table using a script to fill in the appropriate fiscal components
5. Build a primary key on the date or some other user-defined unique key
6. Build a series of non-unique keys on the components required within your hierarchies - typically fiscal month, fiscal quarter and fiscal year
7. Import this table into Discoverer as your master time folder
8. Create lists of values on all of the indexed items
9. Copy the folder, using CTRL-C, once per transaction date, and paste it using CTRL-V into the appropriate business area
10. Move the new folder up under its designated transaction folder
11. Rename the folder and the items within it to reflect the date that it is going to manage - E.g. for a ship date the folder could be called SO Ship Date, with the main items being called Ship Date, Fiscal Shipped Month, Fiscal Shipped Quarter and Fiscal Shipped Year
12. Create a Discoverer hierarchy on Ship Date, Fiscal Shipped Month, Fiscal Shipped Quarter and Fiscal Shipped Year and name it Ship Date Hierarchy
13. Build a 1:N join from the calendar date in the copied folder to the transaction date - you probably also want the date in the underlying transaction table to be indexed for maximum performance
14. Hide the date in the transaction folder
Ok, now that the basic workflow has been outlined let's talk about some of the steps. Step 1 asks you to determine your fiscal periods. What this means is that you need to know the start and end date for your organization's fiscal year, and all of the fiscal periods in between.
If you are using Oracle E-Business Suite you can use the GL_PERIODS table to get this information. This table stores information about the accounting periods you define using the Accounting Calendar form in Apps. In other words, GL_PERIODS is the Apps table that contains your organization’s fiscal calendar. However, because you can have recursive joins between the elements of this table, report performance can be seriously impacted. Each row includes the start date and end date of the period, the period type, the fiscal year, the period number, and other information. There is also a one–to–many relationship between a row in the GL_PERIOD_SETS table and rows GL_PERIODS.
You can now write a simple script that will pull out the fiscal period information. Then, after you are certain that your algorithms are working, you should create a materialized view of your GL_PERIODS date hierarchy. After you have created the materialized view, you should place a unique index on the calendar date, with non-unique indexes on the months, quarters, and years. After you do this, inside your view you can now join your transaction date to the date in the materialized view and read off the hierarchy.
Most DBAs are rightly concerned about adding materialized views to E-Business Suite. In this case, because GL_PERIODS is only updated only once a year, you have a perfect candidate for a materialized view. You just need to make sure that you refresh the materialized view after you add the dates for the next year.
Now, GL_PERIODS only has information concerning fiscal periods, or months. You have to get the individual dates in there as well. Once again, if you are using Apps and you are using BOM (Bills of Material) you may well be using a table called BOM_CALENDAR_DATES. This table contains one row per date within your year. In order to join this table to GL_PERIODS you need to be able to determine which fiscal period a certain date falls in to. Having worked that one out you now join to the previous script adding a clause such as DATE >= GL.PERIODS.START_DATE and DATE <= GL_PERIODS.END_DATE where the PERIOD_TYPE is 'Month'.
Here is a script that might give you the basics:
SELECT DISTINCT
gl_mth.period_name month,
gl_mth.period_set_name set_name,
gl_mth.start_date mth_start_date,
gl_mth.end_date mth_end_date,
gl_mth.period_num mth_number,
gl_mth.last_update_date mth_last_update_date,
(gl_mth.end_date -
gl_mth.start_date) +1 mth_timespan,
gl_qtr.period_name quarter,
gl_qtr.start_date qtr_start_date,
gl_qtr.end_date qtr_end_date,
gl_qtr.quarter_num qtr_number,
gl_qtr.last_update_date qtr_last_update_date,
(gl_qtr.end_date -
gl_qtr.start_date) + 1 qtr_timespan,
gl_yr.period_name year,
gl_yr.start_date yr_start_date,
gl_yr.end_date yr_end_date,
(gl_yr.end_date -
gl_yr.start_date) + 1 yr_timespan,
gl_yr.last_update_date yr_last_update_date,
gl_yr.period_year period_year,
gl_qtr.entered_period_name actual_qtr
FROM
apps.gl_periods gl_mth,
apps.gl_periods gl_qtr,
apps.gl_periods gl_yr
WHERE
gl_mth.PERIOD_SET_NAME = 'your data set name'
AND gl_mth.period_type = 'Month'
AND gl_mth.start_date >= '01-OCT-1998'
AND gl_qtr.quarter_num = gl_mth.quarter_num
AND gl_qtr.period_year = gl_mth.period_year
AND gl_qtr.period_type = 'Quarter'
AND gl_yr.period_year = gl_mth.period_year
AND gl_yr.period_type = 'Year';
Does this help understand the logic behind creating fiscal date folder?
Best wishes
Michael Armstrong-Smith
URL: http://learndiscoverer.com
Blog: http://learndiscoverer.blogspot.com

Create Customize Hierarchy in BW

Similar Messages

Maybe you are looking for