Create Domain User during TS
Hey
Is there a way to add a Domain Admin account to a Win 8.1 machine during the OSD, the main reason I want this to be done is so I can skip the Win8 Intro/Preparing user screen that takes 5 mins the first time a user is logged on.
Cheers
You should be able to create an answerfile to stop this
or it can be found in the registry:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System
EnableFirstLogonAnimation DWORD
0 = Disable
1 = Enable
Add it to your TS
reg.exe add "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /v EnableFirstLogonAnimation /d 0 /t REG_DWORD /f
Similar Messages
-
Problem Creating OIM User During Provisioning
I have customized a .jar file which will allow me to create a user with the user login based on the first and last name of the user (this item is not stored on the user form until provisioning is initiated). My process definitions are ordered:
1) Create Custom User Login (Store in UDF).
2) Provision User to Database
3) Create OIM user.
The process works via direct provisioning. However, during a request based provision, I receive the following errors:
Running TESTTASK
Target Class = oimuser.oimuser
<Jul 6, 2011 5:53:44 PM EDT> <Error> <oracle.iam.request.impl> <IAM-2050028> <An error occurred while getting a request data set. An entity type is not specified for the model Provision Resource,which is based on generic entity.>
<Jul 6, 2011 5:53:44 PM EDT> <Warning> <oracle.iam.platform.kernel.impl> <IAM-0080002> <Orchestration validation failed on the event handler - oracle.iam.request.exception.RequestServiceException: IAM-2050028:An error occurred while getting a request data set. An entity type is not specified for the model Provision Resource,which is based on generic entity.>
<Jul 6, 2011 5:53:45 PM EDT> <Error> <oracle.iam.identity.usermgmt.impl> <IAM-3050029> <The user cannot be created due to validation errors.
oracle.iam.platform.kernel.ValidationFailedException: oracle.iam.request.exception.RequestServiceException: IAM-2050028:An error occurred while getting a request data set. An entity type is not specified for the model Provision Resource,which is based on generic entity.
at oracle.iam.identity.usermgmt.impl.handlers.create.CreateUserValidationHandler.checkRequired(CreateUserValidationHandler.java:825)
at oracle.iam.identity.usermgmt.impl.handlers.create.CreateUserValidationHandler.validate(CreateUserValidationHandler.java:241)
at oracle.iam.platform.kernel.impl.OrchProcessData.validate(OrchProcessData.java:210)
at oracle.iam.platform.kernel.impl.OrchProcessData.runValidationEvents(OrchProcessData.java:173)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.validate(OrchestrationEngineImpl.java:569)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.process(OrchestrationEngineImpl.java:433)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.orchestrate(OrchestrationEngineImpl.java:381)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.orchestrate(OrchestrationEngineImpl.java:334)
at oracle.iam.identity.usermgmt.impl.UserManagerImpl.create(UserManagerImpl.java:630)
at oracle.iam.identity.usermgmt.api.UserManagerEJB.createx(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy317.createx(Unknown Source)
at oracle.iam.identity.usermgmt.api.UserManager_nimav7_UserManagerRemoteImpl.createx(UserManager_nimav7_UserManagerRemoteImpl.java:2563)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:84)
at $Proxy180.createx(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:198)
at $Proxy314.createx(Unknown Source)
at oracle.iam.identity.usermgmt.api.UserManagerDelegate.create(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.createUser(tcUserOperationsBean.java:221)
at Thor.API.Operations.tcUserOperationsIntfEJB.createUserx(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy310.createUserx(Unknown Source)
at Thor.API.Operations.tcUserOperationsIntf_e9jcxp_tcUserOperationsIntfRemoteImpl.createUserx(tcUserOperationsIntf_e9jcxp_tcUserOperationsIntfRemoteImpl.java:2506)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:84)
at $Proxy166.createUserx(Unknown Source)
at Thor.API.Operations.tcUserOperationsIntfDelegate.createUser(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(SecurityInvocationHandler.java:68)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.security.Security.runAs(Security.java:41)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(weblogicLoginSession.java:52)
at Thor.API.Base.SecurityInvocationHandler.invoke(SecurityInvocationHandler.java:79)
at $Proxy403.createUser(Unknown Source)
at oimuser.oimuser.createUser(oimuser.java:52)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpATESTCREATEUSER.TESTTASK(adpATESTCREATEUSER.java:98)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpATESTCREATEUSER.implementation(adpATESTCREATEUSER.java:46)
at com.thortech.xl.client.events.tcBaseEvent.run(tcBaseEvent.java:196)
at com.thortech.xl.dataobj.tcDataObj.runEvent(tcDataObj.java:2492)
at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(tcScheduleItem.java:2936)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(tcScheduleItem.java:554)
at com.thortech.xl.dataobj.tcDataObj.insert(tcDataObj.java:602)
at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:474)
at com.thortech.xl.dataobj.tcORC.insertNonConditionalMilestones(tcORC.java:849)
at com.thortech.xl.dataobj.tcORC.completeSystemValidationMilestone(tcORC.java:1162)
at com.thortech.xl.dataobj.tcOrderItemInfo.completeCarrierBaseMilestone(tcOrderItemInfo.java:500)
at com.thortech.xl.dataobj.tcOrderItemInfo.eventPostInsert(tcOrderItemInfo.java:151)
at com.thortech.xl.dataobj.tcUDProcess.eventPostInsert(tcUDProcess.java:192)
at com.thortech.xl.dataobj.tcDataObj.insert(tcDataObj.java:602)
at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:474)
at com.thortech.xl.dataobj.tcTableDataObj.save(tcTableDataObj.java:2905)
at com.thortech.xl.dataobj.tcORC.autoDOBSave(tcORC.java:2977)
at com.thortech.xl.dataobj.util.tcOrderPackages.createOrder(tcOrderPackages.java:513)
at com.thortech.xl.dataobj.util.tcOrderPackages.orderPackageForUser(tcOrderPackages.java:177)
at com.thortech.xl.dataobj.tcOIU.provision(tcOIU.java:563)
at com.thortech.xl.dataobj.tcOIU.eventPostInsert(tcOIU.java:303)
at com.thortech.xl.dataobj.tcDataObj.insert(tcDataObj.java:602)
at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:474)
at com.thortech.xl.dataobj.tcTableDataObj.save(tcTableDataObj.java:2905)
at com.thortech.xl.dataobj.tcUserProvisionObject.insertImplementation(tcUserProvisionObject.java:283)
at com.thortech.xl.dataobj.tcDataObj.insert(tcDataObj.java:591)
at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:474)
at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.provisionObject(tcUserOperationsBean.java:2813)
at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.provisionObject(tcUserOperationsBean.java:2615)
at Thor.API.Operations.tcUserOperationsIntfEJB.provisionObjectx(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy310.provisionObjectx(Unknown Source)
at Thor.API.Operations.tcUserOperationsIntf_e9jcxp_tcUserOperationsIntfRemoteImpl.provisionObjectx(tcUserOperationsIntf_e9jcxp_tcUserOperationsIntfRemoteImpl.java:688)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:84)
at $Proxy166.provisionObjectx(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:198)
at $Proxy309.provisionObjectx(Unknown Source)
at Thor.API.Operations.tcUserOperationsIntfDelegate.provisionObject(Unknown Source)
at oracle.iam.requestactions.eventhandlers.ProvisionResource.provisionObject(ProvisionResource.java:278)
at oracle.iam.requestactions.eventhandlers.ProvisionResource.execute(ProvisionResource.java:208)
at oracle.iam.requestactions.eventhandlers.ProvisionResource.execute(ProvisionResource.java:95)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.iam.platform.kernel.impl.EventHandlerDynamicProxy.invoke(EventHandlerDynamicProxy.java:30)
at $Proxy235.execute(Unknown Source)
at oracle.iam.platform.kernel.impl.OrchProcessData.runActionEvents(OrchProcessData.java:1028)
at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:637)
at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:220)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:669)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:716)
at oracle.iam.platform.kernel.impl.OrhestrationAsyncTask.execute(OrhestrationAsyncTask.java:108)
at oracle.iam.platform.async.impl.TaskExecutor.executeUnmanagedTask(TaskExecutor.java:100)
at oracle.iam.platform.async.impl.TaskExecutor.execute(TaskExecutor.java:70)
at oracle.iam.platform.async.messaging.MessageReceiver.onMessage(MessageReceiver.java:68)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy322.onMessage(Unknown Source)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Here is my dataset:
<?xml version='1.0' encoding='UTF-8'?>
<request-data-set xmlns="http://www.oracle.com/schema/oim/request" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.oracle.com/schema/oim/request" name="ProvisionResourceOracle DB User" entity="Oracle DB User" operation="PROVISION">
<AttributeReference itresource-type="DBUM ITResource definition" available-in-bulk="true" required="true" length="20" widget="itresource-lookup" type="Long" attr-ref="Custom Servers" name="Custom Servers"/>
</request-data-set>
I am using the default ProvisionResourceRequest.xml
What do I need to do to make it so that my .jar will work during request-based provisioning?FYI I found a solution - change context to ADMIN using Contextmanager in the code.
-
Error in phase creating java users during installation!!
Hi,
We are getting error at step "Creating java Users" while installing NW 2004s SR1 non unicode dual stack on HP Ux Pa Risc 64 bit with database Oracle 10g.
Erro logs of file /tmp/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/sapinst_dev.log are as:
==================================================================================================
ERROR 2011-07-21 13:20:37
CJSlibModule::writeError_impl()
CJS-30197 . For more details see output of logfile:
TRACE [iaxxejsbas.hpp:460]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2011-07-21 13:20:37 [iaxxgenimp.cpp:736]
showDialog()
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|2|0|createJSF was executed with status ERROR .
=================================================================================================
Also please note that we have already 1 instance (dual stack) on same host and that is running fine.
Could someone please assist us in proceeding further.
Regards
Joy GargHi,
Issue gets resolved by extracting manualy from JAVA_DVD_DIR/J2EE_OSINDEP/J2EEINSTALL.SAR to SAPINST install directory using SAPCAR. The path of this install directory is:/tmp/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/install as:
> pwd
/tmp/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/install
> SAPCAR -xvf /SW/NW_2004s_SR1Java_based_SW_Comp/J2EE_OSINDEP/J2EE-INST/J2EEINSTALL.SAR
Once we have extracted the J2EEINSTALL.SAR relaunch SAPINST again and the installation continue.
Regards
Joy garg
Once you will have extracted the J2EEINSTALL.SAR please launch SAPINST again and the installation will continue. -
Error in creating Java Users during Solution Manager installation
Hi gurus,
First time trying to install SAP.
Red Hat Linux 4
Oracle
jdk 1.4.2_11
While installing the Solution Manager, it errored when it was creating Java Users, SAPJSF, J2EE_ADMIN and J2EE_GUEST.
The error description read "jco$exception: rfc_error_system_failure: invalid request".
I want to create these users manually and continue with the rest of process.
I searched lots of entries, notes, etc., but somehow, my "old" pair of eyes (and brains, too) failed to come up with something I could understand.
So, gurus, please help, help, help!!
There are no GUI version of anything installed, no Virtual Admin, no nothing like that. I have to rely on good old unix (Linux) command to do (add users) this.
Can you please, please post the instructions (step-by-step)? Please have a pity on me since this is my very first time dealing with SAP.
Thanks and regards.Creating users manually is not the intension of the SAP Installation tool. There are other solutions available
A good starting point is to check if SELinux is enabled or disabled. I've seen lots of broken installations on Red Hat because SELinux does not allow the installer to create users. Check if in /etc/selinux/config the setting
SELINUX=disabled
is set.
I see, that you are using JDK 1.4.2_11. Is this the Sun JDK? In case you are on x86_64 you have to use the IBM JDK instead. You can download it from <a href="https://www14.software.ibm.com/webapp/iwm/web/reg/download.do?source=lxdk&S_PKG=amd64142sr7&S_TACT=105AGX05&S_CMP=JDK&lang=en_US&cp=UTF-">here</a> .
Also a new SAPINST may help. The current Installation Master CD can you download here:
http.//service.sap.com/swdc
-> Download
-> Installations and Upgrades
-> Entry by Application Group
-> SAP Technology Components
-> SAP SOLUTION MANAGER
-> SAP SOLUTION MANAGER 3.2/4.0
-> Installation and Upgrade
-> LINUX
-> ORACLE
51032006 SAP Solution M. 4.0 SR1 Inst. Master **
Best Regards,
Hannes Kuehnemund -
From here [url http://e-docs.bea.com/aldsp/docs30/admin/security.html#wp1090018]
I found that only a "domain user" can do what I am trying to do. However, the only user account created during creation of the domain is "weblogic" which appears not to be a domain user, but merely an administrator. I was not prompted to create a domain user when I created the domain. So, can someone tell me how to do this?
Thanks,
JeffA "domain user" is simply a user in the domain. The "weblogic" account is a "domain user".
To create more "domain users", go to the documentation for WebLogic Server, and search on : create a user
http://edocs.bea.com/wls/docs92/index.html -
Newbie : How can i create 2 users with the same name on diff domain name ?
I have two domains on my server
exemple1.com
exemple2.com
and i want to create one user for each domain with the same name
[email protected] and [email protected]
curently i can create one user, and it's the same user for both domains :-/
how ?
thanks
HèteI must say. I am equally curious about this. i've played a lot in Communigate and it is easy to do there but how does one do this in apple mail?
-
Dear All,
I have a simple Runbook with the following details:
Initialize Data: (First Name, Last Name, Login Name, Deparment Name) --> Create User: Name:(Domain), Common Name, Display Name, First, Last Name, SAM Account Name (From Initialize Data) --> Enable
User: Distinguished Name --> Add User to Group: Group Distinguished Name, User Distinguished Name
Active Directory Management Pack in place and the Prerequisites Configurations are added Too (Configuration User Name, Configuration Password, Configuration DC, Configuration Default OU.
The Runbook is Synched with Service Manager, Request Offering/Service Offering and published to the portal.
When I filled the 4 required values (First Name, Last Name, Login Name, Deparment Name), the Runbook will kick off and the user is created in Active Directory.
The user is placed in the Default OU which is predefined in AD Prerequisites Configurations in Orchestrator.
I need to add another Required Value to my Request Offering (SR) called User Level Enum List (Low, Medium, High).
I need to place the user in a Specific OU based on the Level entered from SSPortal, If the user is Low, then Create the user in this OU, if the user is Medium then create it in this OU, etc...
How can I do this in Orchestrator? What I want to modify in my runbook to accomplish this task?
Thank you,I AM TRYING TO USER/MAILBOX CREATION PROCESS, FOLLOWING IS THE BUSINESS REQUIREMENT
GET THE USER FROM ERP SYSTEM (SQL)
CREATE USER IN SPECIFIC OU
ENABLE THE MAILBOX IN SPECIFIC DATABASE BASED UPON USER ROLE
CREATE A USER IN NAVISION SYSTEM WHICH IS AGAIN JUST CREATING SQL LOGIN.
PLEASE ADVISE ME THE PROCESS AND PROCEDURE ILLUSTRATION IF IT ALL POSSIBLE IN SINGLE RUNBOOK.
I AM ABLE TO CREATE USER/MAILBOX BUT STRUGGLING TO CREATE IN SPECIFIC OU/MAILBOX DB AND SQL LOGIN.
FARRUKH
[email protected]
Farrukh Anwar -
Error when trying to create/edit users in the tree domain from exchange
The scenario is we have one forest and two different domains in tree domain architecture(Forest : expo.com)(tree : dept.com) with windows 2012R2
We have deployed exchange 2013 in another server with windows 2012R2 based on expo.com.
When I try to create new user for dept.com I am getting the below error. but the same is working for expo.com
error
Active Directory operation failed on Server2.dept.com. This error is not retriable. Additional information: Access is denied. Active directory response: 00000005: SecErr: DSID-031521E1, problem 4003 (INSUFF_ACCESS_RIGHTS), data
0
When I try to create mailbox for the existing user in the dept.com i am getting the below error. but the same is working for expo.com
error
Active Directory operation failed on Server2.dept.com. This error is not retriable. Additional information: Insufficient access rights to perform the operation. Active directory response: 00002098: SecErr: DSID-03150BC1, problem
4003 (INSUFF_ACCESS_RIGHTS), data 0
Please help on providing me the details of configuration to do for solving the issue.Hi araddy,
Thank you for your question.
For user account in dept.com, we should create it on DC in dept.com domain.
By my understanding, we have install Exchange 2013 in expo.com domain, there are no Exchange that install in dept.com domain. If I misunderstanding, please be free to let me know.
If that, If that, we should create link mailbox for user in dept.com domain. In the Exchange forest, for each user in the accounts forest that will have a mailbox in the Exchange
forest, create a mailbox that is associated with an external account by the following link:
https://technet.microsoft.com/en-us/library/jj673532(v=exchg.150).aspx
The more details could be referred by the following link:
https://technet.microsoft.com/en-us/library/aa998031%28v=exchg.150%29.aspx
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support -
SAPInst ECC6.0 - Error during phase "Create Java Users"
Hello,
I am currently installing ECC6.0 IDES with windows server 2003 & MaxDB.
I am getting an error during the "Create Java Users" phase. The initial error stated that the user SAPJSF already existed. During retry a different error came up - that the user SAPJSF has no password.
Can anyone advise what I can do here to resolve this problem?
Regards,
Nicholas WilsonHello Again,
Just to provide some further information, this is the log which I received when the SAPInst first errored:
Jan 12, 2007 10:12:31... Info: User management tool (com.sap.security.tools.UserCheck) called for action "checkCreate"
Jan 12, 2007 10:12:32... Info: Connected to backend system Z01 client 001 as user DDIC
Jan 12, 2007 10:12:32... Info: Called for user SAPJSF
Jan 12, 2007 10:12:39... Info: Formal password check successful
Jan 12, 2007 10:12:39... Info: Will create user SAPJSF
Jan 12, 2007 10:16:54... Warning: Error during creation of user SAPJSF. Will remove user again to ensure clean exit state
Jan 12, 2007 10:17:03... Error: Exception during execution of the operation
[EXCEPTION]
com.sap.security.tools.UserCheck$DetailException: User SAPJSF already exists
Diagnosis
You have tried to create an existing user using the copy function.
Procedure
Please edit the existing user or first delete the user and then use the
copy function. Or choose another user name, for example, by appending
part of the first name.
[System: Z01(001), Message: 01 224]
at com.sap.security.tools.UserCheck.handleBapiRet2Table(UserCheck.java:1252)
at com.sap.security.tools.UserCheck.createUser(UserCheck.java:1795)
at com.sap.security.tools.UserCheck.main(UserCheck.java:289)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Jan 12, 2007 10:17:07... Info: Leaving with return code -2
Reserved 1610612736 (0x60000000) bytes before loading DLLs.
According to the log, the system believed the user SAPJSF to have already been created.
When I carried out a retry, I receive the following log:
Jan 12, 2007 10:23:45... Info: User management tool (com.sap.security.tools.UserCheck) called for action "checkCreate"
Jan 12, 2007 10:23:45... Info: Connected to backend system Z01 client 001 as user DDIC
Jan 12, 2007 10:23:45... Info: Called for user SAPJSF
Jan 12, 2007 10:23:45... Info: User SAPJSF exists
Jan 12, 2007 10:23:45... Error: Exception during execution of the operation
[EXCEPTION]
com.sap.security.tools.UserCheck$UserLogonException: User account SAPJSF has no password (USER_HAS_NO_PASSWORD)
at com.sap.security.tools.UserCheck.checkUser(UserCheck.java:833)
at com.sap.security.tools.UserCheck.main(UserCheck.java:268)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Jan 12, 2007 10:23:45... Info: Leaving with return code 2
Reserved 1610612736 (0x60000000) bytes before loading DLLs.
In this log, it accepts that the user SAPJSF is already created, but errors because the user does not have a password.
Any suggestions greatly appreciated.
Regards,
Nicholas. -
Hello,
Suddenly the working CRM is being stopped for some group of users.
I drilled down to the issue and have checked that the users from Domain in which CRM is installed are having CRM access.
But for other domain user having problem to access CRM.
I tried to add a user from a domain which is not of CRM domain then it gives following error.
"Business Management Error: You are attempting to create a user with a domain logon that does not exist. Select another domain logon and try again.
<Message>LookupAccountNameW failed with error</Message> "
The change is made - AD group have upgraded Activer Directory server to 2012 R2
Please help as the Production CRM is not working for other domain user.We have Activer Directory Structure like below.
One Root Domain says A
and there are multiple child domain like B,C,D etc...
B,C and D are all in same level,they are child of A domain.
There are two way transitive trusts between A and all the child Domain.
But there is no trust in between B and C and so on.
Our CRM server is in B domain and B domain's user can access CRM but users of Domain C,D and so on can not access CRM.
If this post answers your question, please click "Mark As Answer" on the post and "Mark as Helpful" -
Hi,
We are facing a problem during phase PMVNTAB_UPG, at this point shadow instance is no longer used and the system has been switched to the new version (6.0).
The problem exists with a Z view that does not exists in the database and we did enter using SE11 to the system but the only users allowed to enter the system are SAP* and DDIC, other users are not permited and an "Upgrade in progress" error do not let anybody else to enter.
I tried to create a user copied from DDIC but when trying to save the user an abap dump shows up and I can´t save the user. At this point I´m not sure if creating a new user won´t heart anything and in fact I´m waiting for SAP response to the problem because we can ignore this view as long as it is not used at all.
Now the question, have sombody ever used the UPGADDUSR
report to create the user upg_tmp_user? this is supposed to be a user valid only during a week that can be used to solve this kind of problems. I haven´t run the report but I guess it won´t work as it will probably come up with the same abap dump that SU01 gave me.
Thanks,Ok, I found how to unlock the system so we are able to enter to the system.
I use tp unlocksys... and tp_locksys as per note 1062559 -
The code impersonate a domain user to create a private messaging queue on local machine, using MessageQueue.Create(".\\myqueue").
When the current user is a member of local administrators, it works well.
When the current user is a member of local users, it throw exception "Msmq service is not available."Hi Psun,
In my opinion, this thread is related to MSMQ forum. So please post thread on that forum for more effective response. Thank you for understanding. Please refer to the following link.
http://social.msdn.microsoft.com/Forums/windowsdesktop/en-US/home?forum=msmq
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Is oracle user created by default during installation of OEL 5
i want to know that is oracle user and its groups already created by default during installation of OEL 5.5 ??
user13376823 wrote:
i want to know that is oracle user and its groups already created by default during installation of OEL 5.5 ??Why would it? It's just an operating system. It doesn't know or care what applications you may or may not choose to install at any time in the future after it (the OS) is installed, nor does it know or care about the requirements of any application you may choose to install at any time in the future. -
Stuck at "Creating SAPJSF user..." step during installation of SolMan
Dear Experts,
I was trying to install Solution Manager 7.0 EHP1 thru SAPInst.exe and it stuck during "Creating SAPJSF user" step, and the following is the statement I found in installation log message.
ERROR 2011-01-26 16:26:11.986 sixxcstepexecute.cpp:950
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|4|0|createJSF was executed with status ERROR .
Does anyone know what went wrong?
Regards,
AbrahamHello All,
We have also faced the same error (attaching part of the error below) while installting PI 7.1, EHP 1 on Win 2008 with SQL 2008 Database. And got the resolution following the earlier message thread from Mr. Abraham and downloaed the New Kernel having "JLAUNCH.EXE" and upgraded with new kernel.
Then the error came that the User "SAPJSF" is already created which we deleted after login at ABAP level using T.code SU01 and then got our installaltion successfully completed.
Thanks a lot....Abraham for updating the solution.....!!
Regards,
Devki Nandan Bhatt
ERROR 2011-09-04 11:35:11.800 [sixxcstepexecute.cpp:984]
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|6|0|createJSF was executed with status ERROR ( Last error reported by the step :. DIAGNOSIS: For more details see output of log file:).
TRACE 2011-09-04 11:35:11.989
Instantiating new NWUsageTypeBasic
TRACE 2011-09-04 11:35:11.989
NWUsageTypeBasic() done
TRACE 2011-09-04 11:35:11.994
Call block:CallBackInCaseOfAnErrorDuringStepExecution
function:CallTheLogInquirer
is validator: true
WARNING 2011-09-04 11:35:11.997 [iaxxejshlp.cpp:150]
Could not get property IDs of the JavaScript object.
ERROR 2011-09-04 11:35:11.998 [iaxxejsctl.cpp:492]
FJS-00010 Could not get value for property .
Edited by: D.N. Bhatt on Sep 4, 2011 11:12 AM -
Hi,
I have posted this in another large thread under the "Windows 8 General" group but have not had any appropriate feedback from MS.
After hours of testing and working with other users I have managed to isolate a simple situation that breaks all metro ui applications within Windows 8 for all users on the machine. Here are my exact steps and notes.
Before continuing if you are running Avast then your solution may be to turn of the behaviour shield functionality as this also breaks metro apps. This is NOT the problem we are having!
I have performed 3 cleans installs after isolating the problem and am able to reproduce the issue every time using the same steps on two different machines.
First thing to say is that for us it has nothing to do with simply joining the domain, domain/group policies nor does it appear to have anything to do with the software we installed, the problem here is much more simple but the result is pretty terrible.
Here are my exact steps of what I did to reproduce our problem:
Complete format of HDD in preperation for a clean install
Clean install performed
Set up the machine initially with a local account
Test metro apps - all working fine
Open control panel from the desktop, click on System, change the system to join the domain, click reboot
Log into the system using my domain account
Test metro apps - all working fine
Here's were the problem starts. I need my domain account to have admin rights on the local machine so I can install programs without the IT men having to come over and enter their password every 5 mins.
I go to control panel via the desktop and click on User Accounts. From with here I then click on "Manage User Accounts". This requires the IT guys to enter their details to give me access to such functionality. This is fine
In the dialog box that opens I can only see the local user that was initially created during setup. The "Group" for this local account shows as "Administrators" - Image included below (important to note that metro apps are working at this point)
I click add and then add my domain account - also giving it administrator access
Sign off or reboot to ensure the new security is applied
Sign back in to the domain account
Test metro - ALL BROKEN
Sign out
Sign in as local account
Test Metro - NOW ALL BROKEN FOR THIS USER ALSO
So as soon as I add my domain account to the local user accounts and set it as admin it breaks all metro apps for all users. This is on a totally clean install with nothing at all installed other than the OS.
Annoyingly if I go back and change the domain account to a standard user or if I totally remove the domain account from the local account management system the problem does not go away for either user. basically it is now permanently broken. The only fix I
could fathom was a full re install and not giving the domain user admin access to the local machine.
Screen one - this is the local user accounts window AFTER joining the domain and logging in with my domain account (All metro apps working at this point)
Screen 2: User accounts AFTER joining the domain and AFTER adding domain account to local user management (METRO BROKEN)
I have isolated my machine from all group policies so nothing like that is affecting me. Users I have spoken to in different companies have policies that automatically add users to the local user management. This means that metro apps break as
soon as they join the domain which leads them to wrongly think it is group policies causing the error. Once they isolate themselves from this they can reproduce following my steps.
ThanksHi Juke,
Thank you for the response and apologies for the delay in getting back to you. My machine was running a long task so I couldn't try your suggested solution.
I had already tried running the registry merge suggested at the top of the thread to no avail. I had not tried deleting the OLE key totally so I did that and the problem still exists. I will post all the errors I see in event viewer below. For
your info, since posting my initial comment I have sent out my steps to 7 different people and we can all reproduce the problem. This comes to 10 different machines (3 of them mine then the other guys) in 3 different businesses / domains. We see the same errors
in event viewer.
Under "Windows Logs" --> "Application" : I get two separate error events the first reads "Activation of app winstore_cw5n1h2txyewy!Windows.Store failed with error: The app didn't start. See the Microsoft-Windows-TWinUI/Operational log for additional
information." The second arrives in the log about 15 seconds after the first and reads "App winstore_cw5n1h2txyewy!Windows.Store did not launch within its allotted time."
Under "Windows Logs" --> "System" : I get one error that reads "The server Windows.Store did not register with DCOM within the required timeout."
Under "Applications And Services Logs" --> "Microsoft" --> "Windows" --> "Apps" --> "Microsoft-Windows-TWinUI/Operational" : I get one error that reads "Activation of the app winstore_cw5n1h2txyewy!Windows.Store for the
Windows.Launch contract failed with error: The app didn't start."
If you require any further information just let me know and I will provide as much as I can.
Thanks
Maybe you are looking for
-
It is possible to embed a pdf file in a report?
Hi community, The question is a little bit complex, cause we do not know if belongs to Reports or tu E-Business-Suite. Our development Team has just created a report for a list of purchased/sold goods, which output is a PDF file. On the other hand, t
-
Hello! For the past few days I was searchng for JAVA to COM bridge. I have a dll file from third partry that contains just LOTS of classes and methods and I need to work with it from my java application. I have found a few solutions. 1. IBM Java inte
-
I recently joined BT Infinity and got an email the other day telling me I had an extra bill to pay -- i.e. the one-off set up charge, etc -- and that because it was on top of my normal bill I'd need to pay it separately, along with a helpful link to
-
I'm trying to install ruby via homebrew onto my computer (Macbook air Yosemite), but when I put a command into the terminal, I always get "command not found". I was trying to open ~/.bash_profile to TextEdit and add on export PATH=/usr/local/bin:/usr
-
New ledger Now..or Classic than migrate later
Goodmorning everyone, We are implementing mySAP ERP ECCV.6 and we have to decide verysoon whether we go with newledger or Classic ledger than migrate. We made all the reasearch about the benefits of new GL and we like it. However to minimize the ri