Create entry in Internal Posting table COSS

Hi All,
I want to create an entry in table COSS..
Please help me...
Thnx
Rohit

You can enter data Programatically but it is not a correct approach.
Create a Table maintenance Generator to for table COSS to make an Entry.
follow below steps
1) go to se11 check table maintanance check box under
attributes tab
2) utilities-table maintanance Generator->
create function group and assign it under
function group input box.
also assign authorization group default &NC& .
3)
select standard recording routine radio in table
table mainitainence generator to move table
contents to quality and production by assigning
it to request.
4) select maintaience type as single step.
5) maintainence screen as system generated numbers
this dialog box appears when you click on create
button
6) save and activate table
OR.
Check Tcode for the COSS table and Use BDC.
Regards,
Gurpreet

Similar Messages

Creating entries in a database table

I have created a database table and want to insert new records in it thru this path -
Utilities --> Table contents -
> Create entries.
But the create entries is not highlighted i.e. the system is not allowing me post entry in this way.
Any idea why it might happen ?

Hi Kushal,
The issue is that the Table View Maintenance is set to be anything other than "Display/Maintenance allowed".
You can get this in the "Delivery and Maintenance" Tab when you open the table through SE11.
Change this to the above mentioned value and then you can create entries in the table.
Thanks,
Ajay.

Unable to create Entries in the Z Table -- Make entry in the form 9,999.999

I have created/Copied a standard table to a z Table with 5 fields.
One of the Field should be capbale to hold AAAAA.DDDDDDDDDDDDDD. (ie 5 Place before point and 14 decimal places).
So I have created Domain DEC with 14 decimal places and 19 No Characters.
When I tried creating an Table Entry(REcord), System rejects the value present in this field wth the following
message "Entry 12345.000000 is to long. (Make entry in the form 9,999.99999 or /9,999.99999.)".
One more thing: I have maintained the DEcimal Notation as 1,234,567.89 in the User Defaults(TCode SU01).
Please help !
RJ

Hi,
So as you said the notaion comma is also included in the count of places.
so try giving as1,234.00000 - shouldn't give error.
if no error then increas the total no. of character in domain to 20 and check giving value 12,345.000000...
Regards
Salini.

E-Recruiting: Internal Posting Application (Internal Candidate)

Module:
e-Recruiting: Internal Posting Application (Internal Candidate)
Case/scenario:
Candidate submits internal posting application via Customised Internal Posting Application (PDF) form in Portal.
Question:
How to attach/create the Customised Internal Posting Application (PDF) form in the candidate's attachment table HRP5134.
Please provide SAP Standard/sample program/references for the followings:
1) Creating Data in HRP5134 (Attachments) - Attach Internal Posting Application form in the candidate's (Object NA) attachment table.
2) Creating Data in HRP5135 (Manual Activities) - Activities 1015 (Acknowledge Internal Candidate) for Object ND.
Regards,
Bart
012-2547375

Hi,
can you tell us the technology which you are using?
If it is BSP the coding decides the channel used for the seach based on th is_employee information. Here a wrong system behaviour could be caused by missing authorization on the employee object (P). In this case the application might not be able to read the P object which would let the internal candidate appear as external one. The application would change to the external application coding and show the external publication.
If it is Web Dynpro it points to a wrong application linked. The web dynpro application calls a certain inbound plug in the web dynpro component. If the wrong application is used the wrong plug would be supplied and the application could switch to the external publication. Same would happen if you entered the wrong plug in the in the startpage configuration.
Another thing which comes to my mind rading that it only effects some employees. Have you checked field IS_INACTIVE in HRP5102 for these employees?
Kind Regards
Roman

Loading data : Creation of entries in the Qualified Table

Hi,
I was wondering if anyone has succesfully achieved the following...
I'm looking at the standard materials repository.
- Main Table : Product
- Qualified Table: Location Data. This qualified table single non-qualifier field is a look-up to a flat look-up table, called Plants
The flat table is populated with the valid list of plants, using the check table synchronisation. The Main Table is empty, so is the Location Table.
In order to load products into this repository using the import manager it seems that it is required to "create" entries in the qualified table (Location), one for each plant-code.
Is this true ? I actually would expect the SAP MDM Import Manager client to be able to create the records in both the main table and if needed, the qualified table. As long as my plant code exists in the "Plants" look-up table, that should be sufficient. It seems not the case..
Thx,
Dirk

The sequence of Import
- Load the Flat Lookup tables. ( in your case Plants)
- Load the Qualified Tables ( in your case load the non qualifiers of the Location Data)
- Load the Main table (in your case Products)
Though MDM allows you to create Lookup values on the fly, I would rather go with this approach.
If you are using Import Manager, you can add the Qualified Table Records in the fly.
But if you are using Import Server, you will NOT be able to add Qualified table records in the fly. I tested this, and I see the files in the ImportX error directory.

Creating entry in table COSS

Hi All,
I want to create an entry in table COSS..
if any transaction please tell me....
or any other ways....
Please help me...
Thnx
Rohit

Hi All,,
What i found is that for creating records in COSS we can use KP06 transaction...but with cost Element with Secondary cost element categories ....ie 21,31 42, 43,etc
then only it will creates entry in COSS....
Till now this is my finding.....
if u have another way plz let me know....
Thnx
Rohit

"21141: Error while posting journal entry :-10 / Internal error"

Hi All,
I'm want to dispose fixed asset by using retirement function in Fixed asset module. Anyone know the solution for this error message "21141: Error while posting journal entry :-10 / Internal error". Please help me.
Thanks in advance.
uddin

Hello Muhd
Please could you go in Administartion > Set Up > Fixed assets > GL
Account Detemination and check the settings of 'Clearing Acc. Asset
Acquisition' account, which is used when creating Journal Entry for
'Acquisition without vendor'.
Could you check if there is a 'Default VAT Code' assigned to this
account. In this case could you to clear the Default VAT Code assigned
to this account and try to do 'Acquisition without vendor' again?
Also,please try to check below option to see if that could help:
1)Check asset Class Land
2)Check GL accounts settings
3)Check the checkbox "Permit Other VAT Group"
Regards,
Syn Qin
SAP Business One Forums Team

Error while creating a dynamic internal table refers to custom field

Hi all,
I am getting the exception TYPE_NOT_FOUND when I try to create a dynamic internal table using:-
DATA: gr_desc TYPE REF TO cl_abap_typedescr.
gr_desc = cl_abap_typedescr=>describe_by_name( p_field ).
The field p_field is a Z-field inside a DB table, (e.g. a user added field in MARA). The statement fails at that point and gives a runtime exception. Any suggestions to how I may solve this problem? Or any alternatives for the same? I guess we face this issue for all custom fields..has SAP released a note for this??
Thanks..

that's just the wrong method, you should use DESCRIBE_BY_DATA
gr_desc = cl_abap_typedescr=>describe_by_data( p_field ).
Note: DESCRIBE_BY_NAME is to be used for referencing a DDIC type by its name. Example:
gr_desc = cl_abap_typedescr=>describe_by_name( 'MARA-ZZFIELD' ).

How to create mass entries in a database table

Hi,
I am going to do a program that can help me to charge registers in a database table. The origin of the registers is an excell file, that contains 39000 entries.
In other programs I use this function: 'ALSM_EXCEL_TO_INTERNAL_TABLE' but this function can only read 9999 registers. So I ask for us if There is another function that can help me. The other possibility that I think is call many times this function but If is possible to find another function, I guess that is better.
Thanks and regards.

Please allow me to translate "charge registers" into "create entries".
This function module works quite simple via the clipboard, you could take the code and create your own version that allows more rows. However there might be a bottleneck at some point due to your local PC power.
You could also store as CSV or TXT and use GUI_UPLOAD function or the "frontend" classes.
For more performant processing the data would need to be transferred to the application server and uploaded from there using OPEN DATASET and so on, please search for more information.
Thomas

Deleting entry from internal table

Hi Experts,
i have the following internal table:
data : it_result1 TYPE crmt_object_guid_tab
and work area
data : wa_result1 type crmt_object_guid.
i have to delete a guid from internal table based on some condition.
loop at it_resul1 into wa_result1
if lv_priority eq priority.
delete this entry from internal table.
endif.
endloop..
i tried using delete table it_result with table key CRMT_OBJECT_GUID = wa_result. but this is giving syntax error.
what should be done to delete the entry?
Thanks and regards
Shilpi

Hi
Check Syntax for DELETE operator on pressing F1
1. DELETE itab.
2. DELETE TABLE itab WITH TABLE KEY k1 = v1 ... kn = vn.
3. DELETE TABLE itab [FROM wa].
4. DELETE itab INDEX idx.
5. DELETE itab FROM idx1 TO idx2.
6. DELETE itab WHERE logexp.
7. DELETE ADJACENT DUPLICATES FROM itab.
delete table it_result with table key CRMT_OBJECT_GUID = wa_result
this is wrong
delete it_result where CRMT_OBJECT_GUID = wa_result
Edited by: Lavanya K on Apr 22, 2009 10:20 AM

Checking the initiality of the fields while creating entries for a table

While creating entries using table maintenance generator(TMG) i need to check the initiality of the fields.Are there any such events?
I know i can go and change in the screen by making it mandatory or by writing a module in the PAI of the screen of table maintenance generator. Both of cases i have to change the TMG which is generated by SAP system. I want to know is there a way to achieve this with out changing the TMG possible events?

hi rahul,
as far as i know, you have to do your initial valifdation in TMG and you have to change your TMG. However, if you have checked the initial flag while defining the field, you will not have initial value for that particular field.... (if the field is key field, by default it is not initial)
hope this helps....
thanks and regards,
tanmaya

After creating a customizing database table 'create entries disable'

After creating the database table i want to add fields through goto-table contents-create entries but "create entries" is in disable mode how can i resolve this?

Dear Dileep,
You need to go to "Delivey and Maintainence" tab there you will "Data Browser/Table Maintainence",
Here you need to select "Display/Maintainence Allowed" in the drop down list.
Thie will help to find the "create entrie enable".
Thanks,
Ananth.

Creating entries in a Table at runtime and attaching it to a Transport

Hi,
I need to create an entry in a database table through my program and at the same time I have to attach the same in a transport request. The Table is client independent.
I am able to create a transport using BAPI_CTREQUEST_CREATE. But does not know how to add the table entry to it.
Please help.
Regards,
Himanshu

Hello,
is it a standard table ? A z* table ?
How do you update this table: by INSERT/MODIFY abap instructions ? By batch-input ? Something else ?
Cordialement,
Chaouki.

How to create an entry in Badi Filter table T77HAP_FLT_PRP

How to create an entry in Badi Filter table T77HAP_FLT_PRP

Hello Rahul,
Filter types should be created on badi implementations ( in transaction se19 )
Read my answer on this thread :
Re: BADI:Filter type un editable
I hope it helps.
Bulent

What is the procedure to create entry in NAST table for particualr document

Hello ABAP GURUS,
I need to know how to create objectkeys in NAST table for particualar document number.
My requirement is i need to check my smartform output for Goods Receipt.IN nast table,i dont have any entries for Goods Receipt.So i need to create entries in NAST table.Please help me to solve this problem.
waiting for your replies
Regards
Maruthi

Hi!
Ususally it is not neccessary to create manual entries in NAST.
You have to print the document from its transaction. Naturally there may be some other settings which are required after setting transaction NACE.
If you understand the Letter of delivery on the Goods Receipt, which can be printed from VL02N, then you have to set some automation to your printing using transaction VV22.
Regards
Tamá

Create entry in Internal Posting table COSS

Similar Messages

Maybe you are looking for