Unable to create Entries in the Z Table -- Make entry in the form 9,999.999
I have created/Copied a standard table to a z Table with 5 fields.
One of the Field should be capbale to hold AAAAA.DDDDDDDDDDDDDD. (ie 5 Place before point and 14 decimal places).
So I have created Domain DEC with 14 decimal places and 19 No Characters.
When I tried creating an Table Entry(REcord), System rejects the value present in this field wth the following
message "Entry 12345.000000 is to long. (Make entry in the form 9,999.99999 or /9,999.99999.)".
One more thing: I have maintained the DEcimal Notation as 1,234,567.89 in the User Defaults(TCode SU01).
Please help !
RJ
Hi,
So as you said the notaion comma is also included in the count of places.
so try giving as1,234.00000 - shouldn't give error.
if no error then increas the total no. of character in domain to 20 and check giving value 12,345.000000...
Regards
Salini.
Similar Messages
-
I am unable to create a new email message when I connect to the internet through google
I am unable to create a 'new email message'when I connect to the bigpond.com webmail through the internet from my ipad2.
Try this. Settings>Safari>Block Pop-Ups>Off.
I have an Exchange account that behaved similarly to what you are describing. I finally realized that I had to allow pop ups in order to access my mail on the server. -
This entry already exists in the following tables 'Journal Entry' (OJDT)
Forum,
I'm 8.81 PL09. Yesterday we performed a stock count then updated quantities and then reconciled the stock posting. This correctly posted a journal to the relevant stock gain/loss account.
Today we found that there had been a couple of mistakes in terms of the counted quantity so we again went into Stock Taking, amended the quantities then went into stock posting. We confirm the quantities need updating but upon trying to 'Reconcile' we get the following error:
This entry already exists in the following tables 'Journal Entry' (OJDT) (ODBC-2035) [Message 131-183]
I have tried to perform a restore item balances to no avail.
Could anyone shed any light on this?
Regards,
JuanHi,
I'm facing the same problem. It seems like the number series got stuck. I also reconsiled the first load, and then for the next one I'm facing the same problem as you have. I can see the first journal entry having the correct docnum according to the number series setup. But in the number series setup, the "Next no." still have the same number as the first journal entry. I have no idea how to fix it, but to make it work for now I guess you could go and change the default number series for Journal Entries and finish rout inventory posting.
Let me know if there is any fix on this one.
Kjetil Sandvik -
Content Tab: None of the fact tables are compatible with the query request
Hi All,
**One thing I am not clear yet of all my years with OBIEE is working with the content tab in BMM.**
I have made a rpd the joins in physical layer as shown below:
https://picasaweb.google.com/114804305606242416264/OBIEEError#5663056545119428530
And the BMM layer as:
https://picasaweb.google.com/114804305606242416264/OBIEEError#5663056519553812930
Error I am getting when i run a request from the 3 columns from the selected 3 tables is:
Dim - Comment Code Details
Fact - Complaint
Dim - Service Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14020] None of the fact tables are compatible with the query request Sr Num:[DAggr(Fact - Complaint.Sr Num by [ Dim - Service Details.Sr Cat Type Cd, Dim - Comment Code Details.Cmtcode name] )]. (HY000).
I get no error for consistency.. I read everywhere and I know i need to set the appropriate aggregation levels in the various dims and facts LTS properties to help OBIEE understanding our model, but how to do that.. how do i decide... how should I approach, what should be the aggregation level, what details.
When i click More button i see different options: Copy, Copy From, Get Levels, Check Level, what do these mean.
Aggregation Content, group by - Logical Level or Column which one should i choose and how should I decide.
Can anyone explain the Content Tab in details and from scratch with some example and why we get these errors.... I know many people who are well versed with many other things related to RPD but this. A little efforts of explaining from you guys will really be appreciated.
Thanks in advance,
DevHi Deepak,
Option 1:
My tables in physical layer are joined as below:
D1--> F1 <--D2--> F2 <--D3
Same way i model it in BMM
D1--> F1 <-- D2--> F2 <--D3
Here D1 is non Conformed Dimension for F2 and D3 is non Conformed dim for F1. Later create Dimensional hierarchies, I tried setting up the content levels
I go Sources>content tab of Fact F1 I set
Dimensions----------- Logical level
D1---------------------- D1 Detail
D2---------------------- D2 Detail
D3---------------------- D3 Total
then, I go Sources>content tab of Fact F2 I set
Dimensions----------- Logical level
D1---------------------- D1 Total
D2---------------------- D2 Detail
D3---------------------- D3 Detail
Then, I also go in all the dimensions and set their content levels to Details, but it still gives me errors not sure where I am going wrong in setting the content levels.
I need to know whether the way I have modeled it in BMM is right,
Option 2:
I can combine the two facts in a single Logical Fact or the above design should also work.
(F1&F2)<--D1, D2 , D3 joined separately using complex logical joins.
what will be the content tab details?
Thanks,
Dev -
Error: None of the fact tables are compatible with the query request
Hi experts,
I have one confirm dimension D1 and other two fact table F1 and F2 (F1 and F2 are connected to D1)
when i create a report from D1 and F1 the report is running fine. But pull the column from F2 also in this report i am getting the following error
None of the fact tables are compatible with the query request Code Combinations
please suggest on the same.
Regards,
SHi
i have done the content level setting in each of the table, D1,F1 and F2(LTS), now i am getting the following error..
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 15018] Incorrectly defined logical table source (for fact table Gl Sets Of Books) does not contain mapping for [Code Combinations.Code Combinations.Affiliate, GL Balances.GL Balances.Currency Code, GL Balances.GL Balances.PTD_Balance, Gl Sets Of Books.Gl Sets Of Books .SoB Name]. (HY000)
Gl Balances : D1
Code Commbination: F1
Gl Sets Of Books : F2
I have checked the joins in physical and BMM layer..all are fine.. -
"None of the fact tables are compatible with the query request " error
I've got a situation where I have two facts(Fact_1, Fact_2) and three dimensions(dim_1,dim_2,dim_3) in 1 subject area. I've got dimension hierarchies setup for all the dimension tables.
Dim_1 is one to many to Fact_1
Dim_2 is one to many to Fact_2
Dim_3 is one to many to both Fact_1 and Fact_2
I've set up the content levels for the LTS for the Facts so that they are the lowest grain for dimensions they join to and the grand total grain for dimensions they do not join to.
My rpd is consistent. When I run a report using an attribute from Dim_3 and Dim_1 or Dim_3 and Dim_2, the report comes back fine.
But if I try to run a report using all three Dim tables, I get an error and the message "None of the fact tables are compatible with the query request ".
First of all, is it possible to make a report using all three dimensions?
Second, what's the best way to trouble shoot this error? Why are none of the fact tables compatible? I thought as long as the aggregation levels were set to grand total for non-shared dimensions, Answers would be able to create the report properly.
Any advise would be greatly appreciated.
Thanks!
-JoeOBIEE is looking for a fact that can link ALL the dimensions together. This is also known as the implicit fact ... you don't have a fact that can relate all the dimensions - you have 2 facts that together they can. Perhaps you need to great a single logical fact that has both LTS for your physical facts and try it that way.
Then you'd have Dim1, Dim 2, Dim3 all being able to join to Fact1 (which is made of physical facts 1 & 2). -
Essbase answers - None of the fact tables are compatible with the query request "member"
Hi,
I have modelled an Essbase database into the repository.
If I pull the measure, period and year dimension in and filter on the year (member) and display the year (member) along with the period (alias) and measure it errors with =>
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Fiscal Year.Fiscal Year Code. (HY000)
However, all other things being equal if I change the year displayed to the alias then it works.
Anyone tell me why??
Is there a limitation that Essbase brings through that you cannot view what you filter on?
thanks,
Robert.Hi
i have done the content level setting in each of the table, D1,F1 and F2(LTS), now i am getting the following error..
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 15018] Incorrectly defined logical table source (for fact table Gl Sets Of Books) does not contain mapping for [Code Combinations.Code Combinations.Affiliate, GL Balances.GL Balances.Currency Code, GL Balances.GL Balances.PTD_Balance, Gl Sets Of Books.Gl Sets Of Books .SoB Name]. (HY000)
Gl Balances : D1
Code Commbination: F1
Gl Sets Of Books : F2
I have checked the joins in physical and BMM layer..all are fine.. -
None of the dimension tables are compatible with the query request
Hi,
i am experiencing the below error while querying columns alone from employee dimension (w_employee_d) in workforce profile SA. There is only one column in my report which is employee number coming from employee dimension. when i query other information like job, region, location etc i am not getting any error. the below error appears only when querying columns from employee dimension. the content tab level for the LTS of employee dimension is set to employee detail.
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14077] None of the dimension tables are compatible with the query request Dim - Employee.Employee Number. (HY000)
SQL Issued: SELECT 0 s_0, "Human Resources - Workforce Profile"."Employee Attributes"."Employee Number" s_1 FROM "Human Resources - Workforce Profile" FETCH FIRST 65001 ROWS ONLY.
couldn't able to know the exact reason. Any suggestions would be highly appreciated.
Regards.hi user582149,
It is difficult to answer you question with such a little amount of details. Could you specify:
- how many facts/dimensions are you using in the query?
- what is the structure of your Business Model?
- which version of OBI are you using?
- what does your log say?
I hope to tell you more having the information above
Cheers -
How to download the custom Tables to xls from the system?
Hi
How to download the custom Tables to xls from the system?
VijayHi,
Goto SE11, in the table name field give Z*, and click on display. You will get the list of Z tables.
Regards,
Prabu -
With in the internal table can I READ the same internal table for a record?
With in the internal table can I READ the same internal table?
For Suppose
LOOP AT itab.
can I do as below
READ TABLE itab with key bukrs = itab-bukrs
belnr = itab-belnr.
*and I have to compare
IF itab-shkzg = itab-shkzg_ia.
ENDIF.
ENDLOOP.Hi,
Yes..But use work area to differentiate..
EX.
DATA: WA LIKE ITAB.
DATA: WA_READ LIKE ITAB.
LOOP AT itab <b>INTO WA</b>.
can I do as below
READ TABLE itab <b>INTO WA_READ</b>
with key bukrs = itab-bukrs
belnr = itab-belnr.
*and I have to compare
IF <b>WA</b>-shkzg = <b>WA_READ</b>-shkzg_ia.
ENDIF.
ENDLOOP.
Please reward for helpful answers.
Thanks,
Naren -
i have forgotten my security question answers and my recovery emails aren't coming through. Apple won't or are unable to resolve so how do i now make purchases on the ipod touch?
Wont/Unable as in you were not able to verify information?
Basicly the only way Account Security is not able to reset your security questions is because
1 - You do not remember your password
2 - You were unable to verify any information which is required
If you do not remember your password - until your password is either remembered or reset - will not be able to reset questions via Support
If you know your password - then if you are unable to verify any information regarding your account your questions will not be reset.
I apologize - If the information above is not the case try calling back in. -
How can i check my mails on the iphone and make sure that the mail wont pop up again on my computer/ will be deleted on the server ?
For that kind of connectivity you need to be using an email account configured either as IMAP or Exchange.
IMAP & Exchange accounts will maintain a sync across all your devices, so if you read / delete a message on your phone, it will disappear from the server as well. This cannot happen in POP email accounts.
If your using gmail, instructions on how to set up exchange / imap are here http://www.google.com/support/mobile/bin/answer.py?answer=138740&topic=14252
Alternatively, if its anything other than Google, you will need to contact your email providor or IT department (if your email address resides with an enterprise environment) to get the correct settings.
Hope this helps! -
hello, since I actualized my Mac with Maverick it doesn't recognize any external hard disk ,... only the one to make copy on the time machine. Can anybody help me? thank you!!!!
Hello Laurabcn,
Thank you for using Apple Support Communities.
For more information, take a look at:
USB and FireWire Quick Assist
http://support.apple.com/kb/ht1151
Have a nice day,
Mario -
I cannot use the bottom part of my touch screen. It would not respond to any of the touches I make. Is the screen broken or have I stuffed up my settings? I want to be able to type on my iPhone
Basics from the manual are restart, reset, restore from backup, restore as new. If you've been through ALL these steps and you still have the problem, you'll need to bring the phone to Apple.
-
I deleted my music through the "manage storage" section in the options to make room for the ios update awhile back. Now I can't get any music back onto my device through itunes. (I've tried restoring the device twice to no avail)
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Cant figure out why my phone is asking for my billing information for a free application.
When i try to download an application, my iPhone keeps telling me to sign in to view billing information and it brings up my debit card information. Then it doesnt let me do anything, even when the applications are free. Why is it doing this?
-
Part 2:Store The Current Session id in an Odi Variable
Hi, I want to store the current session id in an odi variable.So I write the code bellow in refreshing tab of the variable. SELECT <%=odiRef.getSession("SESS_NO")%> FROM DUAL I took a oracle schema which points to oracle target data server logical sc
-
When throwing Warning Message from EOImpl, Text, Cause and Action is coming
Hi, When I am throwing JBO Exception through EOImpl code, I am getting warning message with Text, Cause and Action, But my aim is to get only Text message. /* Code used */ JboException e = new ApplcoreException("Message Code"); e.setSeverity(JboWarni
-
How do I specify if the PID object is direct or reverse acting?
I have a process that requires a reverse acting controller - eg if the PV is above the setpoint, I need to increase the controller output to lower the PV. Where in the PID object configuration do I specify this?
-
Substitution rule for SD Condition type
We have a pricing procedure ZPOS in which we have SD condition type ZM10 for 7% additional special levy on the basic billing. The account key ERS is assigned to the condition type and a GL is assigned to the account key in VKOA settings. Based on dif