Checking the initiality of the fields while creating  entries for a table

While creating entries using table maintenance generator(TMG) i need to check the initiality of the fields.Are there any such events?
I know i can go and change in the screen by making it mandatory or by writing a module in the PAI of the screen of table maintenance generator. Both of cases i have to change the TMG which is generated by SAP system. I want to know is there a way to achieve this with out changing the TMG possible events?

hi rahul,
as far as i know, you have to do your initial valifdation in TMG and you have to change your TMG. However, if you have checked the initial flag while defining the field, you will not have initial value for that particular field.... (if the field is key field, by default it is not initial)
hope this helps....
thanks and regards,
tanmaya

Similar Messages

  • Route of the operator.... while creating mapping for idoc to file

    Hi,
    Scenario is IDOC to File but certain rules are there while creating a mapping in XI.
    This is the description for my scenario :
    Within XI this Idoc message needs to be translated into 2 text files:
    1 file for the route of the operator
         - Read the idoc data.
         - When reading a new order first get the customer. This will be a new line in the file.
            The customer number will be set into the filed u2018CustomerIDu2019.
         - Then read the items. For every item create a new line in the file. The machine number will be mapped to the field CustomerID
         - The field RouteOrder should get a sequential number. Starting at 001 and updated by 1 for every new line.
    Could you please guide me how can i implement this above scenario.
    Regards,
    Y.Raj

    Within XI this Idoc message needs to be translated into 2 text files:
    this can be done using multimapping i.e. defining your target messages at mapping tabs in your message mapping.
    When reading a new order first get the customer. This will be a new line in the file.
    The customer number will be set into the filed u2018CustomerIDu2019.
    If there is some condition for identifying new order then you should put condition based on input field.
    if customer no doesnot exists in order then RFC lookup can fetch customerno
    The field RouteOrder should get a sequential number. Starting at 001 and updated by 1 for every new line.
    for this declare varaible in global section and use the same or some builtin function can be used for the same.
    Rajesh

  • Problem while creating index for temporary table...

    Hi,
    i have created index for a temporary table and this script should used by multiusers.So when second user connecting to it is giving index i mean object already exists.
    So what i need is when the second user connected the script should create one more index on temporary table.Will sql server provide any random way of creating indexes if the index exists already with that name??
    Thank You,

    Nope..
    SQL Server is cleaver enough to handel this situation.
    When you create a index or constraint on the Temp Table, eventhough the index name is duplicate it will allow.
    But it only possible on temp tables (prefixed with single #).
    To Test this,
    Open Two window,
    Execute the below window on the opened 2 window..
    create table #test
                id int
    Insert Into #test values(1);
    Insert Into #test values(2);
    Create clustered index testindex on #test(id)
    Now you wont get any error on any of the window. Rite?
    To fetch the created index details, execute the below code on any one of the window..
    select * from sysindexes where name like '%test%'
    Now you can see the 2 rows with same indexname but refereing with different table. Yes. all the temp tables (#) will be suffixed with unique number to avoid the object already found error while multiple users connects.
     

  • Required item no: to populate custom field while creating item for a Sales order

    Hello Experts,
    I have created a custom field for item data of sales order using AET .
    I want to populate this field automatically when ever we create a new item for a sales order using UI or CRMD_ORDER or WCEM by concatenation Sales order number and item number.
    We are getting Item GUID but not getting the item number(need item number before getting saved is their any chance to get item number from item GUID ) to populate the field and save it.
    For this we tried using BADI's
    CRM_BTX_EXTENSIONS
    CRM_ORDERADM_I_BADI
    Thanks in advance,
    Manasa Veena P.

    Where did you add the field ?

  • How to create index for particular table in R3

    Hi
    My load is taking too much time and it leads to process over due error. Does creating indexes on table in r3 side will solve this issue? If so how can we find out on which table does this particular data source depend. I went to maintain extract structure and findout only one table is supplying data for this data source.
    Is there any other factors depend to solve this.
    Thanks
    kk

    Hi,
    it will depend on the table.... Having an index created will speed up the loading but slow down the insert therefore slowing some process perhaps...
    May I ask which table it is? And which fields would you need to index?
    Are you sure that bottleneck is located in R/3? Analyze your loading time in the monitor and see if this is really the case.
    Otherwise you can create index for a table in Tx SE11; first check if an index is not already created...
    hope this helps,
    Olivier.

  • Subject field while creating the change request

    Hi All
    I want to populate the subject field in the change request by default.

    Hi
    The automatic population of the subject field while creating the CR through folloup transaction from Support message.
    Regards
    Kumar

  • Exit to set the automatic PGI and picking while creating outbound delivery

    Hi experts,
    Could anybody suggest how to set the automatic PGI and Picking while creating outbound delivery.
    Currently we are settting VBUK-WBSTK field with value C. But PGI is not happening.
    kindly help me.
    Regards,
    Ravi

    Hello Parihar,
    thanks for reply.
    yes we know that "This process of picking and GI involves reducing the stock and allocating the goods to the delivery"
    if you go for Custom program and Use FM WS_DELIVERY_UPDATE, we can do Picking and PGI.
    our requirement is to do pickong and PGI while creating Delivery it self, based on this output types will be processed.

  • HT3275 Time machine couldn't complete the backup. an error occured while creating the backup folder

    Time machine couldn't complete the backup. an error occured while creating the backup folder Why does this happen?

    hello,
    http://pondini.org/TM/C10.html
    http://Pondini.org/TM/FAQ.html
    http://pondini.org/TM/Troubleshooting.html
    Can't imaging something not being covered there.

  • Mandatory fields while creating masters in SAP B1

    Hi All
    can some body tell if is there any manual where i get to know the mandatory fields while creating the masters in SAP B1 9.0
    Thanks
    Nidhi Trivedi

    Hi Nidhi.
    In Standard you can make UDF mandatory while Creating it by Checking Mandatory Option in UDF Window.
    If you want to make Standard Field Mandatory then you have to use SP Transaction Notification to make that field Mandatory.
    For other options, Please check below links.
    Mandatory Fields in 60 seconds - YouTube
    how to make a field mandatory in SAP Business one ?
    Making Fields Mandatory
    Mandatory Field Options in SAP Business One- no programming required! | Frontline Consultancy
    Hope this helps
    Regards::::
    Atul Chakraborty

  • Display of Profit Center field while creating asset in AS01

    Dear Experts,
    I have a requirement of displaying profit center field while creating asset in AS01. Currently there is no option of profit center in AS01. My client uses the profit center reporting, so they want to assign a profit center at the time of creation of asset in AS01.
    Is this possible to display profit center field in AS01, or else any other option to tackle this issue.
    Regards,
    Juned

    Hi,
    You can only have COST CENTER in asset master, but not profit center.
    You have to maintain the respective PC in cost center master data only.
    If Cost Cetner field is also not in AS01, then you need to activate it first.
    SPRO->FA->AA->Integration with GL->Additional Account Assignment Objects->Activate Account Assignment Objects.
    Here you need to activate COST CENTER field. Now you will be able to change the field status of cost center field in screen layout for asset master data as REQUIRED field. and SAVE
    Then in AS01 you can enter COST CENTER
    Regards,
    Srinu

  • Pan number compulsory field while creating vendor code

    is it possible to make pan number compulsory field while creating vendor code

    Dear Sanjeev
    you can make PAN number mandatory use t.code shd0 in that first give transaction code than give screen variant detail for screen variant program go to xk01 and then go to pan field here click on f1 then click on technical specification u can copy the program and screen name after that click on create tab the xk01 screen field comes again go to pan field double click on that field and then select this as required field and save . then go to transaction variants give the transaction name and add a row in which insert row and gives screen  variant , program and screen then save it now move to standard variant give your  screen variant name and activate  now your pan field is mandatory . if you have any problem in understanding i can provide you the screen shot also on your mail. provide your email id
    Award points .
    Regards

  • Hiding Reference Fields While creating Customer Master

    Hi,
    I want to Hide Reference fields While creating customer master, Thanks in advance
    Thanks
    seshu

    Hello,
    No need of screen exits or ABAPer.
    You can easily do it with Transaction Variant using T-Code - SHD0 (SHD zero).
    If you dont know how to create a Transaction Variant, just search the forum with Date Range "All" & you will get lot of guidence.
    You will just need help of Basis person for removing end-user's authorization for XD01 & giving authorization for (e.g.) ZXD01
    Hope this helps.
    Thanks,
    Jignesh Mehta

  • What is the procedure to create entry in NAST table for particualr document

    Hello ABAP GURUS,
    I need to know how to create objectkeys in NAST table for particualar document number.
    My requirement is i need to check my smartform output for Goods Receipt.IN nast table,i dont have any entries for Goods Receipt.So i need to create entries in NAST table.Please help me to solve this problem.
    waiting for your replies
    Regards
    Maruthi

    Hi!
    Ususally it is not neccessary to create manual entries in NAST.
    You have to print the document from its transaction. Naturally there may be some other settings which are required after setting transaction NACE.
    If you understand the Letter of delivery on the Goods Receipt, which can be printed from VL02N, then you have to set some automation to your printing using transaction VV22.
    Regards
    Tamá

  • How to use the default database service name on creating procedure for data

    how to use the default database service name on creating procedure for datagaurd client failover ??? all oracle doc says create a new service as below and enable at DB startup. but our client is using/wanted database default service to connect from application on the datagaurd environment (rac to non rac setup).please help.
    Db name is = prod.
    exec DBMS_SERVICE.CREATE_SERVICE (service_name => 'prod',network_name =>'prod',failover_method => 'BASIC',failover_type => 'SELECT',failover_retries => 180,failover_delay => 1);
    says already the service available.
    CREATE OR REPLACE TRIGGER manage_dgservice after startup on database DECLARE role
    VARCHAR(30);BEGIN SELECT DATABASE_ROLE INTO role FROM V$DATABASE;
    IF role = 'NO' THEN DBMS_SERVICE.START_SERVICE('prod');
    END IF;
    END;
    says trigger created, but during a swithover still the service is listeneing on listener.
    tns entry.
    prod =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (LOAD_BALANCE = YES)
    (ADDRESS = (PROTOCOL = TCP)(HOST = prod1)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = prod2)(PORT = 1521)) ---> primary db entry
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = proddr)(PORT = 1521)) --> DR DB entry
    (CONNECT_DATA =
    (SERVICE_NAME = prod)
    thanks in advance.
    Edited by: 854393 on Dec 29, 2012 11:52 AM

    Hello;
    So in the example below replace "ernie" with the alias you want the client to use.
    I can show you how I do it :
    First an entry need to be added to the client tnsnames.ora that uses a SERVICE_NAME instead of a SID.
    ernie =
    (DESCRIPTION =
        (ADDRESS_LIST =
           (ADDRESS = (PROTOCOL = TCP)(HOST = Primary.host)(PORT = 1521))
           (ADDRESS = (PROTOCOL = TCP)(HOST = Standby.host)(PORT = 1521))
           (CONNECT_DATA =
           (SERVICE_NAME = ernie)
    )Next the service 'ernie' needs to be created manually on the primary database.
    BEGIN
       DBMS_SERVICE.CREATE_SERVICE('ernie','ernie');
    END;
    /After creating the service needs to be manually started.
    BEGIN
       DBMS_SERVICE.START_SERVICE('ernie');
    END;
    /Several of the default parameters can now be set for 'ernie'.
    BEGIN
       DBMS_SERVICE.MODIFY_SERVICE
       ('ernie',
       FAILOVER_METHOD => 'BASIC',
       FAILOVER_TYPE => 'SELECT',
       FAILOVER_RETRIES => 200,
       FAILOVER_DELAY => 1);
    END;
    /Finally a database STARTUP trigger should be created to ensures that this service is only offered if the database is primary.
    CREATE TRIGGER CHECK_ERNIE_START AFTER STARTUP ON DATABASE
    DECLARE
    V_ROLE VARCHAR(30);
    BEGIN
    SELECT DATABASE_ROLE INTO V_ROLE FROM V$DATABASE;
    IF V_ROLE = 'PRIMARY' THEN
    DBMS_SERVICE.START_SERVICE('ernie');
    ELSE
    DBMS_SERVICE.STOP_SERVICE('ernie');
    END IF;
    END;
    /lsnrctl status - should show the new service.
    When I do this the Database will still register with the listener. I don't give that to the clients. That one will still be available but nobody knows about it. Meanwhile "ernie" moves with the database role.
    So in my example the default just hangs out in the background.
    Best Regards
    mseberg
    Edited by: mseberg on Dec 29, 2012 3:51 PM

  • I have an existing ipod that I use with my mac. I am trying to connect an additional ipod to it but when I try and register, it just brings up the existing info. I don't want to lose the original info or library - just create new for this device. Pls help

    I have an existing ipod that I use with my mac. I am trying to connect an additional ipod to it but when I try and register, it just brings up the existing info. I don't want to lose the original info or library - just create new for this device. Pls help...

    We are starting from the beginning like its a new ipod starts out asking language, country,location services,choose a network,and when we get to "setup ipod touch  " there are 3 options 1..setup as new ipod, 2.restore from ipod backup 3 restore from itunes backup and when we hit setup as new ipod and click next it comes up with sign in with apple id or create a free apple id  we clicked create a free apple id....then comes up with bday,1st name last name, use your current email address, get a free icloud email address or change email address and THIS is where we have problems....if we hit change email address it means that sis's stuff goes under his name and moves all her stuff to this older ipod which the brother does not want. sorry this is so long but its the only way I knew to do it.

Maybe you are looking for