Create Immediate TO for movement type 344

Hi Gurus ,
I wanna create immediate TO for movement type 344, so i did the following configs:
1:Go to OMLR, set field "Immed.TO " as "A" for my warehouse and movement type 344.
Then , i called up MB1B 344, but no TO was created immediatelly.
i checked the additional data in LU03, the movement type is 344, and immed.TO is ticked. it seems all setting is ok, why the TO can't be created immediatelly?
thank you in advance.
BR,
Dragsky

First check which ref. movement type assigned to 344 movement type in W/H under below path
SPRO> LE>WM>Interfaces>IM>Define movement types
In this go to first option and check the last movement type assigned to mvt type 344 i.e. "Reference movement type for posting change in whse mgmt" (in combination with other indicator like stock category, special stock indicator etc....)
Then got to OMLR and check whether this ref. movement type defined for your W/H,
if yes, maintain setting for auto TO in that specific entry (in combination with other indicator like stock category, special stock indicator etc....)
If no, then check movement type for *** W/H and maintain specific entry (in combination with other indicator like stock category, special stock indicator etc....)
Hope it helps.
Regards
Anand Misra

Similar Messages

HUMO-A reason has to be entered for movement type 344

Hi All,
We currently have the system configured to enter a 'reason for movement' for movement type 344 and this field is marked as required in the movement type configuration. We have configures the transactions allowed for the movement type and HUMO is one of them.
When I try to post the same HU using the path 'Edit-> Change HU Posting-> Other Postings->Process-> Transfer posting unrestriced to blocked', it prompts me for a 'Reason for Movt' and allows me to post it to a blocked stock.
However, when we try to post an HU to blocked to stock using the path in HU monitor 'Edit-> Change HU Posting->In Blocked Stock', the system gives an error 'A reason has to be entered for movement type 344'. Please note, it does not even prompt me to enter a reason for the movement.
Is there a configuration node to have the above error corrected? Or is there any SAP note which could help us solve the problem? We are aware of the SAP note 1679167 for transaction VLMOVE but not sure the same would actually correct the issue for HUMO. Any help in this regard is appreciated.

Hello Biswajit,
unfortunately, as far as I can see in source
SAPLHUMO
/ LHUMOF04
FORM
/ TRANSFER_POSTING_HU
during debugging, there is no GUI code to ask user for a reason. So it's a lack of functionality.
I think you can add this by an implicit enhancement around FORM transfer_posting_hu asking user e.g. with function module call POPUP_GET_VALUES_DB_CHECKED.
But transfering the entered reason down to the MM posting seems also not so easy because reason field "GRUND" may not visible in that callstack level.
Hope that helps you along
Best regards,
Matthias

Create inbound delivery for movement type 542 in version 4.7

I have been given a requirement for a third party managed warehouse to receive notification of pending return of unused subcontract materials via movement type 542. A trigger in the SAP system, whatever it may be, would be transmitted to the warehouse via interface. The logical choice to me is an inbound delivery, but this is a 4.7 system, and the storage location in SAP is not warehouse managed or handling unit managed. Creating the outbound delivery to send the material to a subcontract vendor is easy via ME2O, but I have been unable to find a way to create the delivery for return of unused material via movement type 542. I know that the inbound/outbound delivery process is now standard for all movements in ECC6, but I am having difficulty with this in 4.7. Please let me know if anyone else has suggestions on this, or if there is a better alternative. Maybe I'm just thinking about it too hard and overlooking something obvious.

Hi All,
Issue is resolved as it is my fault as I have not tested properly.
Thanks,
Babu.

Create storage location automatically for movement type 261

Hi Experts,
Currently we're inprocess of implementing "create storage location automatically" for reservation, and I've done with the configuration for both reservation side (Define Default Values) and movement type side (GI/transfer posting - Create Storage Location Automatically).
For movement type 201, new storage location successfully extended/created using T-Code MB21 (Create Reservation). But we found an error message while conducting the same thing for movement type 261 (which only can be created using T-Code IW31 (Create material reservation form Work Order).
Did we missed any required configuration? Pls kindly advice on what we should do.
Thanks a lot. Really appreciate the prompt response.
Rgds,
MD

Here's the current situation,
We configured the plant/storage view (SPRO), most of materials already extended to desired plant and storage location. Commonly, we can extend or create any materials for certain plant and/or storage location by maitain material master data (using T-Code MM01).
Recently, we develop the additional configuration to activate "automatic create storage location" for reservation, aligning with the movement type for Goods Issue (201,221,261,301,etc).
Let's say we have material number 123456789 and currently assigned to plant YYYY, but not extended to storage location XXXX. By performing T-Code MB21 (create reservation) with movement type 201 inputted, the respective material (123456789) is automatically created for the XXXX storage location.
But the above condition is not effected while performing the same thing using T-Code IW31 (create material reservation via Work Order) with movement type 261 (GI for Order).
Any idea to perform create storage location automatically while creating reservation for movement type 261? is there any possible configuration or procedure to be added?
Thank you

Movement type '344' blocked to unrestricted - reversal error.

Hi,
I am trying to post movement type '344' blocked to unrestriced reversal in IM. I am using WM for this storage location. while posting the '344' i am getting an error 'Data for creating a delivery is incomplete (vendor)'. Will appreciate any help to resolve this.
thanks.

Hi,
I am trying to post movement type '344' blocked to unrestriced reversal in IM. I am using WM for this storage location. while posting the '344' i am getting an error 'Data for creating a delivery is incomplete (vendor)'. Will appreciate any help to resolve this.
thanks.

Auto TO for movement type 531 - Receipt By Product

Hi All,
I have assigned a sloc to WM to make it WM managed sloc , now after doing a MB1A for an Internal order for movement type 531 , i am getting the Transfer requirement created in background for the material doc , but not the TO. Infact the automatic transfer order creation is activated for the movement type , but the automatic TO is getting created automatically for other existing sloc's .Any idea am i missing any configuration ?
Reg
Benny

Hi,
This topic has been dicussed many times on this forum. Please find information on SAP online help:
Auto TO for TR
http://help.sap.com/erp2005_ehp_04/helpdata/EN/97/91cfd2571211d4b3210050045571f7/frameset.htmA
Auto TR for OD
http://help.sap.com/erp2005_ehp_04/helpdata/EN/c6/f8406c4afa11d182b90000e829fbfe/frameset.htm
Immediate TO
Please check OSS note 566090
Maybe you are looking for immediate TO...
Regards,
Csaba

Hide/Suppress Cost center field in MIGO and MB1A for movement types 551&552

Hi All,
Can anybody tell me how to suppress or hide the cost center field in MIGO or MB1A for movement types 551 and 552?
I did below settings and it worked fine for only MB1A and for MIGO still it is showing cost center field.
IMG > Materials Management > Inventory Management and Physical Inventory >Goods Issue/Transfer posting > Define screen layout > select movement type to change the option.
Also I did gothrough the settings for Enjoy transaction (MIGO) there we have only option to make fields either "Required entry" or "Optional entry" and we don't have an option to hide/suppress.
Please advise or help me .
Thanks in advance!
Regards,
Praveen

Hi
The cost center field is a required field in mvt type 551 as you are scrapping materials, some cost center will need to take the cost of this operation.
Anyway, you first need to make the field as optional for example, before you move.
One option is that you create a screen variant in Tcode SHD0 for MB1A, where 551 is setup as constant (with content) , and mark Cost center as invisible and assign this screen variant to a transaction in SE93.
regards
Sidi

BAPI_GOODSMVT_CREATE for movement type 161, issues in PO creation

Hello Gurus,
I am using movement type 161 with BAPI_GOODSMVT_CREATE in order creating a vendor PO based on the goods receipt posted with the BAPI.
It works fine, nevertheless due to business requirements, I need to apply the following changes:
- in SAP standard the order type is NB by default but in our case I would like to force another order type using the same range that NB. I guess this could be done by activating exit ZXM06U17 (MM06E003). Does someone could confirm it?
- in our process, the purchasing group is not maintained at vendor level (LFM1-EKGRP) but as this field is mandatory in the PO creation and as this data can not be maintained in BAPI_GOODSMVT_CREATE, does someone know if it would be possible to force this value during the PO creation (EKKO-EKGRP) based on a maintenance table? If yes in which user-exit? Exit ZM06U43 could be used?
- furthermore, our specific PO type should have a specific account assignement EKPO-KNTTP instead of the default value U, does someone know if it would be possible to force this value during the PO creation (EKKO-EKGRP) based on a maintenance table? If yes in which user-exit? Exit ZM06U43 could be used?
Kind regards
Chris

Hi Priya,
Just want to share with your guys how to fit this error in BAPI_GOODSMVT_CREATE.
For movement type 161 of PO return you have to pass movement type 101 instead of 161
goodsmvt_item-bwart = 101. After that standard function will determine 101 to 161 automatically and
post that material doc.
NOTE:
In my case
It just heppen only the FIRST time that you do movement with PO Return wich is needed to pass
101 in stead of 161 but after that you can pass 161 the system will continue process correctly.
Hope it help.
Sayan.

Account modification key for movement type 643

Hello Experts,
I am reaching out to you today as I am in need of some info on Account assignment for Goods issue process. I looked at transaction OMWN or OMJJ for movement type based settings. I am running a business process ' Intercompany stock transfer order'. Goods issue movement on delivery reads 643(Goods issue for cross company), which is picking 'Account modification key' VAX.
My requirement was how do I force system to pick VAY for 643 without overwriting VAX with VAY in OMWN transaction. Also there are several possibilities listed out for movement 643 alone. Appreciate if you could briefly tell me how system determines other parameters such as 1) Special stock indicator 2)Consumption posting 3) Value string & 4)Counter to determine 'Account modifier' in the customizing table V_156X_KO for Intercompany movement type 643.
Additional info: Trigger is Stock tarnsfer order type NB. Subsequent process is VL10B for Delivery creation using type NLCC and Intercompany invoice(IV) for shipping the goods to ordering company code. Then in the receiving company MIGO or goods receipt with reference to outbound delivery and fianlly MIRO or Invoice verification.
Regards
SG

Valuation Structure
Data on a material is valuated using the following structure:
Valuation area
Valuation class
Valuation category
Valuation type
Material type
Movement type
Valuation Area
Organizational level at which material valuation is carried out. You can define a valuation area as
follows:
Valuation area = company code
All stocks of a particular material in this company code are valuated together.
Valuation area = one plant
The stocks of a particular material in this individual plant are valuated together. Stocks in
other plants are not included in this valuation area.
You define in Customizing the level at which valuation should take place.
Valuation Class
You group together different materials with similar properties into valuation classes so that you
do not have to manage a separate stock account for every material.
The following table contains examples of possible valuation classes:
Valuation class Description
3001 Colors
3002 Paints
3030 Operating supplies
3100 Trading goods
Which valuation class a material can be assigned to depends on the material type. You can
define the following assignments in Customizing:
All materials with the same material type are assigned to just one valuation class.
Different materials with the same material type are assigned to different valuation classes.
Materials with different material types are assigned to a single valuation class.
MM - Material Price Change (MM-IV-MP) SAP AG
Valuation Structure
10 April 2001
A material is assigned to a valuation class in the material master record. The system checks
whether the material type allows the material to be assigned to the valuation class specified.
The system refers to the valuation class of a material to determine which stock account to post to
when a posting is made for this material.
Valuation Category
Criterion according to which split valuation is carried out:
Procurement
You can valuate a material differently depending on whether it is manufactured in-house
or procured externally.
Origin
You can valuate a material differently depending on where it comes from (such as home
or abroad).
Status
You can valuate a material differently depending on its status (such as new, used,
repaired).
You define the valuation categories in Customizing. A material is assigned a valuation category
in the material master record.
Valuation Type
The valuation type specifies the individual characteristic of the valuation category, such as
internal or external, in the case of Procurement. Within the valuation category Origin, you can
define the different countries as the valuation types. You define valuation types in Customizing.
You first determine all the valid valuation types for a valuation category.
You define in the material master record which valuation types are allowed for a particular
material. For every material subject to split valuation, you must enter all the valuation types
allowed in the material master record.
Material Type
You assign every material to a material type when you create it. Examples of material types in
the standard system include raw materials, operating supplies and finished products.
The material type controls the properties of a material and which data must be maintained for the
material. The following control features are important for valuation:
Is the material managed by quantity?
Is the material managed by value?
Which price control type may be used for the material?
Which valuation class can the material be assigned to?
The system administrator can create or change material types in Customizing.
Movement Type
For every material movement, there is a movement type in the SAP System. The movement type
controls the properties of the movement, for example, which entries you must make when
SAP AG MM - Material Price Change (MM-IV-MP)
Valuation Structure
April 2001 11
entering a material movement, and which updates are carried out when the movement is posted.
The following control features are important for valuation:
Does the material movement cause the quantity to be updated?
Does the material movement cause the value to be updated?
Does the material movement lead to postings in Accounting?
Is the material movement relevant for LIFO/FIFO valuation?
The system administrator can create or change movement types in Customizing.

GL A/C for movement type 309

How to find GL account (tcode..) for movement type 309

The way to check the G/L accounts getting hit is to check the material document's FI document. To look for this document, use TCode MB51 with search selection as movement type 309 and execute, it will bring up all material documents created with this movement, double click on any material document No. will take you to display material document, there in header under DOC INFO tab, you will see FI document button click on that, and you can see the G/Ls and the accounting entry getting generated for the said movement.
Sometimes you will not see any FI document generated for movement 309. The reason is when doing variant adjustment of same price, no accounting document is generated as the prices are same. If the prices are different accounting document is generated.
Edited by: Afshad Irani on Apr 14, 2010 5:16 PM

Re: Changing Inspection lot origin from 08 to 05 for movement type 322 and 349

Reference discussion: Changing Inspection lot origin from 08 to 05 for movement type 322 and 349
With reference to the above discussion and your explanation for user EXIT QAAAT0001, it was stated that:
If you only have two inspection types, you can mark one as preferred. Then with exit use logic that if MM = 311 use preferred inspection type, if 911 use, non-preferred inspection type.
May I ask what are you refer to for MM? It seems like movement type to me, however, I can't find movement type field in the structure within the component of EXIT_SAPLQAAT_002. Appreciate if you could shed some light on this.
Best Regards,
CY
Branched from older discussion by moderator. When there are questions concerning an older discussion, please create a new discussion with reference to the older one. Thanks!

Yes.. you are correct. But with the info that is provided by EXIT_SAPLQAAT_002, you should be able to identify the proper material document in table MSEG which will have the material movement.
You can use the values of plant, batch, material number, Purchase order number, Order number, item number, storage location as well as the current date since the exit would normally be executed on the same date the material movement was done. You'd also probably only execute the logic if QKZ is "X".
Craig

Taxes for Movement type 201

Hi,
How can I configure / develop abap code in userexits/badis to force the system to calculate taxes for movement type 201? When Creating the GI using MB1A for movement type 201, The accounting documents created donot have tax calculated( From vertex ). I am assing the tax codes and jurisdiction codes also I am passing the flag for Calculate tax. I tried changing the document tpe of FI documents but the call to vertex is not happening. Any Ideas?
Thanks,
Nanda

Hi Charlie,
Thanks for your reply. I am aware that SAP does not support this. But I have a requirement for this. Do you have any suggestions how I can accomplish it.
Thanks,
Nanda

Transfer Requirement for Movement Type 262 (Cancel With Ref to Reservation)

Hi Experts,
it is possible to configure the system to create a Transfer requirement for movement type 262 (Cancel With Reference to reservation) ?
When i execute a movement type 262 (Cancel with reference to Order), the system creates a Transfer Requirement, i can process it in transaction LB12. Now i am using the movement type 262 to Reservation, but the system does not create a transfer Requirement.
I am using SAP ECC 6.0.
Thanks in advance,
Alejandro López.

Hi Alejandro,
Can you clarify what process you are performing by this comment? .. "_Now i am using the movement type 262 to Reservation"_.
As per standard process TR (transfer requirement) creation takes place as per the setting in IM-WM interface. Please check in Tcode OMLR, if TR create field is having "X" for the warehouse and reference movement type record. Normally whenever any material document gets posted in IM, MM-WM interface provide the decisions about which WM movement type to pick for warehouse and data about TR , PCN and TO creation.
Hope this will help.
Regards,
Sudhir

Transfer Requirement for Movement Type 262 to Reservation

Hi Experts,
it is possible to configure the system to create a Transfer requirement for movement type 262 to reservation?
When i execute a movement type 262 to Order, the system creates a Transfer Requirement, i can process it in transaction LB12. Now i am using the movement type 262 to Reservation, but the system does not create a transfer Requirement.
I am using SAP ECC 6.0.
Thanks in advance,
Alejandro López.
Edited by: Alejandro López on Feb 28, 2011 1:55 PM

Hi Alejandro,
Can you clarify what process you are performing by this comment? .. "_Now i am using the movement type 262 to Reservation"_.
As per standard process TR (transfer requirement) creation takes place as per the setting in IM-WM interface. Please check in Tcode OMLR, if TR create field is having "X" for the warehouse and reference movement type record. Normally whenever any material document gets posted in IM, MM-WM interface provide the decisions about which WM movement type to pick for warehouse and data about TR , PCN and TO creation.
Hope this will help.
Regards,
Sudhir

Output type for movement type for IDOC creation

Dear Experts,
Can anybody tell how to create "Output type for different movement types for IDOC creation"
Specially for Movement type used for Inbound & outbound.

Hi,
pls find below link's
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/abap/idoc%2bsteps
BAPI & IDOC material
IDOC Scenario Steps
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://sap.niraj.tripod.com/id51.html
http://www.thespot4sap.com/Articles/SAP_ALE_IDOCS.asp
Changing fields in an Idoc segment
Regards
Raj.

Create Immediate TO for movement type 344

Similar Messages

Maybe you are looking for