Create Multiple and Independent Calendars?

ML 10.8.5, Calendar 6.0, running on a mid-2010 MBP (2.4/4/320). iCloud not used; all the data is here on the desktop, none is updated or synched to or from the cloud.
I have one calendar ("DB's Calendar") with all my events, and would like to create a separate calendar to organize the dog's medications. Creating the calendar is easy (⌥-⌘-N, or File > New Calendar). However, when I create an event in that new calendar (⌘ - N, or File > New Event), the new calendar is immediately populated by all the events from DB's Calendar. This occurs even when the calendar list's checkbox by "DB's Calendar" is unchecked.
Seems like the app should be able to manage (and selectively display or print) two different calendars. The only workaround I can imagine is to export all the data from DB's Calendar, delete DB's calendar, create the dog's calendar and print it, delete the dog's calendar, then re-create DB's Calendar and import the data.
Am I missing something completely obvious?
Thanks!
David Brick
Santa Cruz CA

Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About

Similar Messages

I use a PC for work and link it to Office 365. I also have an iphone and ipad. How do I synchronise these devices to Outlook without creating multiple copies of calendars?

I use my PC for work (MS Office and Outlook). I also use Office 365. I also have an iPhone and iPad. I'm having difficulty getting Outlook to synchronise with Apple devices. I keep getting multiple copies of calendars and not being able to see contacts. Is there a process anywhere which describes the best way to manage these devices together? Or should I just give up on the PC and buy a MacBook or Air.

Excellent. These guides got me as far as installing my preferred language pack, which gets added to the add-ons automatically (assuming the user says yes to the appearing question when Firefox is started).
However, the GUI does not change unless the user enters "about:config" and changes the locale.
Is there a way to do this from the command line? I mean, changing the locale settings.
And preferrably for all users. So even when new users get added and they start Firefox the first time, they see it appearing with the preferred locale and not in English.

Contacts transfer to new phone created multiples and corrupted my Gmail account Contacts

I recently upgraded from my old Razr XT912 to the New Maxx. I love my new phone, but when I did the upgrade, the store associate took my old phone and attempted to transfer all my data to my new phone. Besides none of my pictures or other data transferring, when I got my phone back, I had 2 or more often 3 of every contact in my address book. To make matters worse, this caused my entire G-Mail contacts list to then carry all of these triplicated entries. So now you have not only screwed up my Verizon phone contacts list, but you have corrupted my entire GMail Contacts as well. I am NOT happy. How can Verizon make this right? How can I easily eliminate the multiple duplicate/triplicate entries in my contacts list?

Hi, thank you for responding.
I did get all my data off my old phone as it was transfered onto a 16GB
microSD card that was in the phone, but none of it transfered directly to
my new Droid Maxx. Instead I had to take the card home, load it on my PC
and then transfer back to my phone the data that I wanted. Not a huge
deal, but kind of a pain to go through, especially since I thought the guy
in the store just transfered everything over. In the end, I did go back to
the store the next day to retrieve a few items that were still on the phone
memory.
I used backup assistant some time ago and then I think I turned it off in
favor of using Gmail to back aeverything up. I don't know if I had
duplicates of stuff in both places, but in the end, everything copied over
to my gmail contacts and I had 3 of everything. very frustrating. I found
a way to merge duplicate contacts in Gmail contacts and that got me down
from 1500+ to 1000+, but I started out with only about 500. I'm still
trying to figure out what the extra 500 are that are not duplicates and
where they came from.
My Gmail contacts is fixed, for the most part, so I am ok. But, this is a
huge Pain and it happens to EVERYONE in some way or another. I can't
believe the mobile service providers have not figured out a way to do this
without causing a problem. Seriously disappointing. the last time I
changed phones, all of my business contacts got condensed down into one
single generic contact with over one hundred business numbers and addresses
listed within that contact. there was no way split them back out. So when
ever I recieved a call from any one of those 100+ complanies, the same
contact name came up and I couldn't tell who it was. I finally ended up
deleting it and starting over from scratch.
Seriously, Verizon needs to spend some time and money and figure out how to
do this.
Frustrated.
-Scott
On Sat, Feb 22, 2014 at 1:39 PM, Verizon Wireless Customer Support <

4th Gen iPad creating double and triple calendar entries

Syncing my iMac to my iPad and appointments are showing up on my iPad in duplicate and triplicate. How can I make sure appointments only show up once?

Editing this as I am moving my original post as 2nd option, I have an easier one coming.
OPTION1:
DTM, backup device
open BB calendar, click menu options
type RSET (you wont see it type) this will wipe both calendars off the BB
within a few minutes your BES should return whatever is in your outlook back to the BB
OPTION 2:
I am hoping both DD and Desktop have the same number of entries
Open DTM
go to backup and restore
plug in BB
click backup
when backup is complete, click on advanced
on the right side... scroll down to calendar
you wil see calendar and calendar all
select calendar and click CLEAR button at the bottom
then unplug
on your BB, open calendar, click menu and options
type MOVE(you wont see it type) you will then be prompted to merge contacts from device default to desktop
say yes
Message Edited by drizzt09 on 09-04-2009 05:24 PM
Message Edited by drizzt09 on 09-04-2009 05:28 PM

How do I create multiple calendars on my iPad?

How do I create multiple calendars on my iPad?

I love stealing another users posts and here is one now ....
You don't create multiple calendars on the iPad.
The iPad is designed to be synced with a supported application on your computer for contacts and calendar events. The contact Groups I've created with the Address Book on my Mac and the different calendars I have with iCal on my Mac are available and kept synchronized with the my iPhone's Contacts and Calendar applications, and the same applies to the iPad.
Long story short, this is done with the supported application on your computer used for syncing contacts and calendar events.
The same principle applies to PC users. You have to sync within iTunes from a supported calendar application on your PC.

Creating multiple libraries and using an external drive for data

I'm a recent switcher and new to iphoto. On the windows platform, I used adobe album. I have a around 10k of images that I put on an external drive which is attached to my new imac. I deleted the iphoto folder and redirected it to my images on my external. All is working great. I'm looking for some advise on work flow of file/iphoto management. i.e. I'm assuming the more images I accumulate, the slower I photo is going to run? I hear you can create multiple iphoto libraries. Will that only load the photos that are associated with the library and I'm assuming optimize iphoto's performance versus always loading every photo you have taken every time you work in iphoto? If adding libraries is the way to go, can someone direct me to instruction on how to do this?
This may be beyond this threads scope but I plan to put all my data (iphoto, imovies, itunes) onto an external drive in order to keep the imac main drive as clean a possible. Is my thinking correct in doing so. Any negative repercussion in doing so?

Joe:
I'm assuming the more images I accumulate, the slower I photo is going to run?
You'll have to get quite a lot of photos into iPhoto before you start to see a real slowdown in performance. Users have reported libraries of 40K files and they perform just fine. However, do not keep all of rolls open as that will really do a job on the performance. Just open the rolls you need and close them all before quitting.
Yes, you can use multiple libraries and only load what's in each. I use iPhoto Library Manager to manage and move quickly between 10 libraries. With the paid version of iPLM you can move albums and/or rolls between libraries as needed and keep the keywords, ratings, and comments intact.
Using an external HD in order to maintain sufficient free space (10G minimum is what I recommend) on the boot drive to help optimize performance is a very good idea.
As far as any negative aspects, it would be a good idea to have a second external HD as a backup to the working external HD. You can't be too careful with those image files (and other important files) that can't be replaced.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Q10 and multiple shared Google Calendars?

I tried searching on this support forum for answers to my question but could not find any.
I am currently using the BB9930. The device was more than adequate for my purposes even though the lack of apps was always a sore spot. However, the one lack of functionality that I could not compromise was the BB9930's lack of support for displaying multiple Google Calendars that are shared with me. I recognize that I can create a new Google account and have that account's Calendar display on my device, but I am not interested in that. I need to be able to view the Calendars of other Google accounts that are shared with my Google account.
This lack of functionality is turning out to be a dealbreaker for me. I switched temporarily to a Motorola XPRT but that device's keyboard was just not as good, the phone was sluggish, etc. I've switched back to the BB9930 but am planning to switch either to an Android non-keyboarded phone or to the Q10.
Whether I switch to a Q10 is really dependent on whether it supports multiple shared Google Calendars but I can't seem to find a straightforward answer to this question. Can any current Q10 users tell me whether this is possible in their experience? Thanks so much for your help.

Hi and Welcome to the Community!
My memory tells me that the answer remains no...only the primary gmail user calendar can be displayed, and no other calendars associated to the same google account can be shown. I've been digging for an official KB on the matter (I am quite sure that I've recently read one, but just can't find it now!!), without success...perhaps your search will be more fruitful:
http://btsc.webapps.blackberry.com/btsc/microsites/microsite.do
But, my memory also tells me that this is not a limitation of BlackBerry per se. Rather, it is a limitation that Google has placed onto the BlackBerry platform...which is a bit of a different twist on causality. Irrelevant from the end user perspective, but perhaps helpful when one is dealing with their frustrations over the issue (e.g., knowing who to "blame").
Your workaround solution sounds, sadly, like the proper one...create additional google accounts for a calendar-only function, and have the desired calendar be the primary within that account, integrated to the BB10 device via CALDAV:
KB33093 How to setup Google Calendar synchronization via CalDAV on the BlackBerry PlayBook tablet or BlackBerry 10 smartphone
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How do I get events and changes created on my IOS Calendar to show up on iCal using iCloud?

Using iCloud I can sync my events from iCal right to my IPod Touch. This is great except for the fact that I rarely create events on iCal. I usually create events using the Calendar app on my IPod Touch because I always have it handy and I feel that has a much more intuitive UI. I was really excited about iCloud being able to sync my events from my IPod to iCal but it doesn't seem to be working. When I create events on iCal they sync to my Calendar right away, but when I create an event on my IPod it doesn't show up on iCal. The same is true for changes made on my IPod to events synced from iCal. the changes don't show up in iCal at all. HELP PLEASE!

The operating system should read 10.8 - sorry...

Is there a way to create multiple New Tabs pages and name them?

This feature is great but I would like to be able to create multiple new tabs pages and label them. This would be more useful than tabs groups that all load at once.

No that is (currently) not possible.
It will be possible in future Firefox version to specify the number of rows and columns.
*[https://bugzilla.mozilla.org/show_bug.cgi?id=752841 bug 752841] - [New Tab Page] make the number of tabs adjustable
<i>([https://bugzilla.mozilla.org/page.cgi?id=etiquette.html please do not comment in bug reports])</i>

How can I pass value in status and reason for rejection using BAPI_LEAD_CREATEMULTI when creating multiple lead

Hello,
I want pass value in STATUS and Reason for rejection according to requirement when i am creating multiple lead using BAPI_LEAD_CREATEMULTI. Please help me how can i pass value. Please give some sample code that in which table i have to pass values and please also tell me INPUT_FIELDS values. Please help me
Regards,
Kshitij Rathore

Hello,
Please help me for solve this problem. I am trying to solve problem from last 4 days but i didn't get any solution.
Regards,
Kshitij Rathore

I have realised over time I have created multiple accounts. I have bought music on my iphone and am not able to locate the account that I made most of my purchases on. I have bank statements on the purchases but don't know how to contact someone to help.

I have realised over time I have created multiple accounts. I have bought music on my Iphone and am not able to locate the account that I made most of my purchases on. I have bank statements on the purchases but don't know how to contact someone in Itune to help me. PLEASE

I don't have the app adn no expereince with it, but it appears basec on teh app description you may need it installed on your MAC as well to download the files.
You might find help on the vendors website: http://www.nfinityinc.com/index.html

PLEASE HELP!! I've used iWeb to create multiple sites, all published to third party servers. The very last site I made changes to is showing up in any domain file I open - despite their different names and locations on my iMac. I just switched to Lion.

Please HELP!! I just switched to Lion. I have created multiple websites using iWeb 3.0.4 and despite my having saved their 'domain' files in various locations and using different filenames, upon opening the domain files I keep getting the very last site I published. All the sites were published to third party servers. The domain files (still have a preview that look correct and have different file sizes) but keep going back to the last site published. HELP ME PLEASE!! Are the old files still available?!!

In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

How to monitor load on GWWS? and create Multiple GWWS ?

Hi,
I'm running Tuxedo 10gR3 and observed in OS level that GWWS process alone consume more than 10% of CPU all the time and some slowness are claimed by users.
I need to check if this is normal (CPU %) by checking the load on GWWS and if needed to create multiple GWWS to distribute the load.
OS: AIX5.3
Number of CPU : 12
Regards.

Hi Todd;
Thanks for the response, i have checked the stats for the GWWS but it's strange that i have all outbound stats at zero ? :
>
gws -i SPGWW01
GWWS Instance : SPGWW01
Inboud Statistics :
   Request Response Succ : 6051981
   Request Response Fail : 12405
             Oneway Succ :      0
             Oneway Fail :      0
              Total Succ : 6051981
              Total Fail : 12405
Avg. Processing Time : 434.365 (ms)
Outboud Statistics :
   Request Response Succ :      0
   Request Response Fail :      0
             Oneway Succ :      0
             Oneway Fail :      0
              Total Succ :      0
              Total Fail :      0
Avg. Processing Time : 0.000 (ms)
   Total request Pending :     17
Outbound request Pending :      0
    Active Thread Number :    113
Regards.

Batch create multiple pdf's while using epilogue.ps for setting initial view and opening bookmarks

Hi,
I'm trying to batch create multiple pdf's from word files, and use the epilogue.ps file for setting the initial view and opening the bookmarks panel, but i keep getting no satisfying result.. i'm probably missing something fundamental.
I've read some forum posts and adobe help posts explaining this, so i'm pretty sure this would be possible?
Reference:
http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7f0f.w .html see advanced panel options
http://help.adobe.com/en_US/acrobat/using/WS58a04a822e3e50102bd615109794195ff-7f14.w.html
System: Windows 7
Acrobat: Acrobat X professional
i've searched for and found a way to overwite the epilogue.ps file and have inserted the following:
% Insert your custom PostScript here...
[ /PageMode /UseThumbs
/Page 1 /View [/Fit ]
/DOCVIEW pdfmark
After that i checked my Adobe Acrobat preferences, and in the categorie 'Convert to Pdf' i selected 'Microsoft office word' in the select area 'Converting to pdf'.
Clicked 'Edit settings' to allow creating a joboptions file (field: 'adobe pdf settings') which has the option 'Use epiloque.ps and prologue.ps' checked in the advanced section.
So now i thought i would have everyting setup to create my pdf's, however, my view isn't changed to fit, nor are there any bookmarks or in this case thumbs (i used /useThumbs) visible.
Did i miss something obvious? Is there a better way to test this? Any help would be appreciated!

i like it about that ok in how to open my site

Combine functionality Batch Create Multiple files and Set Security

Greetings,
Is there any way to combine the functionality of Acrobat Pro’s “Batch Create Multiple Files” (File (drop down) -> Create PDF -> Batch Create Multiple Files…) and running a batch process (Advanced -> Document Processing -> Batch Processing -> Batch Sequences -> Set Security)?
Ideally I’d like to either:
1) Add the “Set Security” batch process to the “Batch Create Multiple Files … command located under the File (drop down) -> Create PDF
or
2) Be able to create a batch process that first allows me to select the documents (Word, Excel, etc.) I want to convert into PDF files, then converts them, then runs the Set Security batch process.
Right now it isn’t too much trouble to first “Create Multiple Files…” then run the batch process Set Security, but it would be nice to be able to do both with a single command.
Any suggestions?
Thank you,
TPK

I have uploaded the files and shared them. These are the links
Grade 11 Maths Standardisation Project Paper 2 2013.doc
https://files.acrobat.com/preview/9694310d-ca7f-4919-883d-c53b36215d89
Grade 11 Maths Standardisation Project Paper 2 Analysis Grid 2013.doc
https://files.acrobat.com/preview/97da9e5f-d412-4d25-9bbc-d1a525d90826
Grade 11 Maths Standardisation Project Paper 2 Diagram Sheet 2013.doc
https://files.acrobat.com/preview/f50dd62e-af04-4060-85c5-fa81ce6803d8
Grade 11 Maths Standardisation Project Paper 2 Formula Sheet 2013.doc
https://files.acrobat.com/preview/7fc6007b-aaa6-4d65-9a8c-bf99818474a5
Grade 11 Maths Standardisation Project Paper 2 Marking Guidelines 2013.doc
https://files.acrobat.com/preview/b3a715bb-3683-48df-b0ec-3d17442275be
Grade 11 Maths Standardisation Project Paper I Analysis Grid 2013.docx
https://files.acrobat.com/preview/ab62e6b6-0261-434e-8a2f-382f74335685
The first file is the problem file. If you create this file separately, Acrobat will convert it perfectly. But "Batch create multiple files" and the graphics are deconstructed on page 8

Create Multiple and Independent Calendars?

Similar Messages

Maybe you are looking for