Create multiple assets (AS01) - maintain multiple fields can be configured?

When creating multiple similar assets, system prompts if to maintain fields with different contents.
The multiple fields that show are limited. I want to maintain certain fields eg. location, serial, license plate, etc.
Can new fields be added to the maintenance? Please advise.
Thanks.

Hi,
Multipal creation assets only give option cost centre ,Evaluation grp1,2,3,4,5

Similar Messages

How to create multiple schedule lines for configurable products

Hi -
We have enabled variant configuration and would like to have multiple scheudule lines created , but it seems that only one line is avaialble, is there any way to configure the use of multiple schedule lines?
Note - we are not using KMAT material types, rather triggering a unique kit compoments within Sales BOM.
We have been able to make the necessary adjustments to allow the creation of the Scheduling agreement and have the BOM explode correctly, but just am not able to trigger multiple sched lines.
thanks
Bill

Your context node shall contain all these fields like country,city,etc as different attributes.so in your view configuration,add all these fields whatever you require from the AVAILABLE FIELDS section to the DISPLAYED FIELDS section.NOw all these attributes would be added in diff rows.What you need to do is,select the first attribute,lets say COUNTRY,click on this attribute and then on the buttn SHOW FIELD PROPERTIES.Thsi will show you the label name etc.Here you change the label name to NATIONALITY.Also ,it will show you the row no,cloumn span of the field and column span of the label.You need to reduce the column span of the field value.Ie if the column span is from D TO H,reduce it from D TO F.Now goto the next attribute eg CITY and in the same way,goto the attribute properties.Here ,There is a check box SHOW LABEL,uncheck this,and now goto the row no and the cloumn span.Make the row no same as that of the COUNTRY FIELD.The column span should howevrbe statring from where the column span of country field ended.Ie Teh column apsn of counrty field ended at F .So for CITY,the column span should start from G to amybe H.Now this is how you need to accomodate the other fields also in the same row,by changing the row no and column span in the field properties.
Suvidha

Create Multiple Signature and Date fields with a custom Toolbar Button

First off, thanks in advance! I am a scripting newbie and I am trudging my way through with very little experience with scripting of any kind. I am good at taking other's scripts and forming them into something I need, but I can't seem to find anything to do what I want.
Using Adobe Acrobat X, I am trying to create a toolbar button that I can press to create multiple signature and date fields with predetermined locations.
Below is the script I have that is working to create just a single signature box, but I can't seem to figure out the exact syntax to have that same button create multiple fields. In total it is 9 signature fields and 9 date fields need to be created. If you can just give me an example of what the button would look like with multiple scripts? I was assuming I would set up multiple variables and then in the cExec property of the toolbar button I could just call out all of those variables?
var sigswm = "addField('sigSWM', 'signature', '0', [108, 198, 494.64, 72])"
app.addToolButton({cName: "dotbutton", cExec: sigswm, cLabel: "Place Signature and Date Blocks",});
Thanks in advance for any help you can provide.
Billy Sweeney

Thanks! That was probably the only thing I didn't try.
I do have one more question. What I want is when the signature field is clicked it fills out a specific date field. I beleive the script I want would be:
var currentTime = new Date()
    var month = currentTime.getMonth() + 1
    var day = currentTime.getDate()
    var year = currentTime.getFullYear()
    var signingTime = day +"/"+month+"/"+year
    var f = this.getField("dateSWM");
    f.value = signingTime;
I found this on another thread that mentioned it could be placed in the Signed tab of the signature properties dialog. I am assuming it would be placed in my button script file as a setAction script for each signature, but I am not real sure exactly where or how?

HCM PF: Create multiple new records while displaying old ones

Hiya (cross-posted to OSS & SDN),
I'm having some difficulties when trying to create new records to IT0014 while displaying old records at the same time, hope you can help me. The problem in brief is that existing records are removed from display when I create new ones and click on check.
My setup is as follows:
- SAP ERP 6.0 EhP4 SP29
- one form scenario with the following fields set up for backend service SAP_PA (two consecutive calls, first for I0014_xxxxx and the second for fields I0014_xxxxx_NEW):
o I0014_BEGDA Validity begin date 5 SAP_PA: Value for Effective Date Create 0014 * HCMT_BSP_PA_XX_R0014 BEGDA * PAD_BEGDA
o I0014_BETRG Amount 5 SAP_PA: Value for Effective Date Create 0014 * HCMT_BSP_PA_XX_R0014 BETRG * PAD_AMT7S
o I0014_ENDDA End date 5 SAP_PA: Value for Effective Date Create 0014 * HCMT_BSP_PA_XX_R0014 ENDDA * PAD_ENDDA
o I0014_LGART Wage Type 5 SAP_PA: Value for Effective Date Create 0014 * HCMT_BSP_PA_XX_R0014 LGART * LGART
o I0014_LGTXT Wage Type Text 5 SAP_PA: Value for Effective Date Create 0014 * HCMT_BSP_PA_XX_R0014 LGTXT * LGTXT
o I0014_WAERS Currency Manual Default Value: EUR Create 0014 * HCMT_BSP_PA_XX_R0014 WAERS * WAERS
o I0014_BEGDA_NEW Validity begin date Create 0014 * HCMT_BSP_PA_XX_R0014 BEGDA * PAD_BEGDA
o I0014_BETRG_NEW New Amount Create 0014 * HCMT_BSP_PA_XX_R0014 BETRG * PAD_AMT7S
o I0014_ENDDA_NEW New end date Create 0014 * HCMT_BSP_PA_XX_R0014 ENDDA * PAD_ENDDA
o I0014_LGART_NEW New Wage Type 1 ZS_ACTIONS: Value Help Create 0014 * HCMT_BSP_PA_XX_R0014 LGART * LGART
o I0014_WAERS_NEW New currency Manual Default Value: EUR 6 SAP_PA: Value Help Create 0014 * HCMT_BSP_PA_XX_R0014 WAERS * WAERS
- the PDF layout has two table controls: one for displaying the old values (I0014_xxxxx) and one for displaying the new entries to be created (customer requirement to display the tables side by side)
- old values are displayed all right and they get populated without any problems
The problem is that when I try to create a new entry with fields I0014_xxxxx_NEW, the first table entry in fields I0014_xxxxx is cleared out. This same problem currently occurs also with other table type entries (I0027, I0008).
I've looked very closely at note 1043692 and it states the following in its limitations:
- limitation 4:
a change to the field LGART is not allowed
=> I'm not doing a change, trying to create
- limitation 6:
Two front end fields mapped to the same backend (infotype) field cannot be used in the same table, though you have configured different default values and made one field as operation exclusive. The reason being that the field marked as Op-Exclusive will not be operated upon and there will be inconsistencies in the number of table lines generated.
=> could this be the reason for my problem?
I have also given a shot at creating a generic service for the job, but as the same note suggests it didn't work (testing the process timeouts if I return fields with multiple field values with separate indexes and subtypes).
Have you had any experiences with table controls showing both past and to-be values? Does the framework even support this kind of a requirement?
Best regards,
Mikko

Hi Aravind,
appreciate your input.
Not sure however if I followed you completely. When you wrote "values that needed to be displayed are made as optional" did you mean optional = operation-exclusive or optional = disabled with the help of a rule?
Did you btw do this especially with subtype * and index * relevant infotypes? I tried your approach and upon initialization everything looks good (I didn't have the generic service in between SAP_PA:s because gs:s won't work in case of subtype * infotypes at least according to OSS and my initial tests), both the display and edit elements are populated all right.
However when I create a new entry into the new fields, their sort order is messed up upon check & send - the last entry suddenly becomes the first and check & sending for the second time I get errors about LGART and SUBTYpe not being the same (which is natural and according to the OSS note I referred to previously).
If you have been working with subty * related multiple fields, can you elaborate more on your solution?
Best regards,
Mikko

HT5114 How can I create multiple accounts without the necessity to create multiple email addresses? I now have 2 i-phones (mine and my wife's#, 1 i-pad #mine#, 1 i-pad mini #10 year old's#, and 1 I-pod touch #11 year old's). I would like to maintain pur

How can I create multiple accounts without the necessity to create multiple email addresses? I now have 2 i-phones (mine and my wife's), 1 i-pad (mine), 1 i-pad mini (10 year old's), and 1 I-pod touch (11 year old's). I would like to maintain purchase control, but would like to be able to have a separate account ID for each person. Is that possible?

Each email address can only be on one iTunes account, and all purchases are tied to the account that buys them. If you want to have separate iTunes accounts on each then you will need separate email accounts for each iTunes account

How can I create a search plugin for multiple fields

There are a number of sites that have search capabilities but they require entries into multiple fields.
One such site is for instance the IBM Employee directory.
(http://www.ibm.com/contact/employees/servlets/lookup)
On this site - in order to get usable results - I have to enter both First name and Last name of the employee I'm looking for.
I created a search plugin for the site, however I wasn't able to split the entered text into two parts and provide them as separate fields for the form.
Is there a way to do this?
Regards,
Imre

Hi,
This is excellent. Not search-plugin though but but this is as good as a search-plugin. (Even better, as I haven't seen any solution with the plugins for the problem.)
I didn't know that it was possible to use javascript as bookmark location.
Thanks,
Imre

Creating multiple assets

Hi,
We are on version 4.70 and trying to create multiple assets via transaction AS01.
How do we add fields to the pop up screen "Maintain Fields that should be different for similar assets".
Regards.
Pops Balram

Hi,
note 389370:
If you create more than one (similar) fixed asset using Transaction
AS01, after you have saved the fixed asset, the system displays a dialog
box in which you can change fields 'Description', 'Inventory no.',
'BusAr', 'Cost center' and the evaluation groups individually for each
particular fixed asset.
You cannot insert any additional fields in this dialog box. Moreover,
after you have made the change, the system does not carry out a
substitution and, up to Release 4.70, no validation either.
Solution
If you want to maintain additional fields individually, use Transaction
AS02 for further maintenance.
I'm sorry, at the moment there ino othere solution available or planned.
regards Bernhard

Required asset fields can be left empty when created in a PR/PO

Dear all,
I'm facing the following problem: When I'm creating an asset in a PR/PO I have the possibility to leave some required fields blank.
This is what I'm dong: transaction ME51N, choose multiple account assignment and in the bottom screen I create a new asset. In the next pop-up screen (asset master data) some data can be entered (e.g. cost center, location,...) but in our system the field 'capital investment order' is also set as required. Nevertheless it is possible NOT to enter a value in this field (one has to click the butten 'additional data' to be able to enter a value there) and still create a new asset. Furtheron, when working with this asset the system will issue messages because this asset is incomplete.
Can someone tell me if this is a system error because it doesn't seem logical to me that required entries can be left blank.
Thanks in advance.
Hans

Hi,
transaction AUVA (Report RAUNVA00) will list all of your incomplete Assets.
Incomplete Assets can be created in 2 ways:
1. Using a "froreign" transaction like ME51N. Asset creatin from those transactions is not 100% connected to the master record rules, as you may have noticed yourself. You can create the asset, however, it is marked as incomplete. Only the depreciation key is mandatory when creating assets in "foreign" transactions, the rest is not checked against the master record rules so it is very easy to create incomplete asset masters. See also OSS note 178533 on this.
2. Using the regular transaction(s) like AS01 - if after the asset was created, the rules have been changed, like, a certain field which was optional originally and left blank upon creation, now becomes mandatory. The result is again an incomplete asset.
Until the next depreciation run, but latest before the next year change in fixed assets, you have to add missing information to the master records listed in AUVA.
Hope that helps, points welcome
Csaba

Can v create multiple billing document from delivery with single line item

can v create multiple billing document from delivery with single line item

Dear Sandesh
Go to VOV7, select your item category. In this maintain K for Billing Relevance
Now go to VF01, give the delivery number and do not press Enter. Instead click on Selection list on the next screen, select the items you want to bill and click copy and continue if necessary
thanks
G. Lakshmipathi

Export to PDF - Can a single report (rpt file) create multiple PDF files using the export command?

Post Author: markeyjd2
CA Forum: Exporting
Greetings forum members,
My question is, in its entirety: Can a single report (rpt file) create multiple PDF files using the export command, ideally one PDF file per DB record?
In my case; I have a Crystal Report that reads data from a DB table containing ~ 500 records. When I export the report to a PDF file, I get one PDF file, with ~ 500 pages.
What I would like to do is export the report to ~ 500 individual PDF files; One file per DB record. The file names would be based on the table's primary key.
Is this possible?

Post Author: Micha
CA Forum: Exporting
Hi,
you need some lines of code, but its easy. Dependend on how to start the generation of your 500 PDFs, you can write an ASP page and start it via Web Browser, or a Windows Script and start it via scheduled job...
Here's an abstract of the ASP code I use:
First, you create a recordset (here: "rsc") which gives you the list of ID fields you want to export, then you create CrystalRuntime.Application object, then you loop through the recordset, open your report (here: "oRpt") and set login info. Then set the selectionformula, so that the report displays only the data of the current ID, e.g.:
oRpt.RecordSelectionFormula = "(" & oRpt.RecordSelectionFormula & ") AND {myTab.myVal}=" & rsc("myVal")
Then you export the report, move to the next record in recordset, and repeat the loop until recordset.EOF. Then you close recordset and connection.
Micha

Can we create multiple session in BDC using Call session?

Hi Experts,
Can we create multiple sessions in BDC using Call Session?
Scenario:
Program has to upload 1 million records,so can we programmatically create multiple sessions such that after every 50thousand records we create a different session.
For moment due to large number of records BDC DYNPRO and BDC Field are unable to hold the large number of records,due to which we get a Out of memory error.
Thanks in advance.
Shilpa

Hi
If ITAB is your table with the data to be transfered:
Open the first session:
CALL FUNCTION 'BDC_OPEN_GROUP'.........
IF SY-SUBRC = 0.
FL_OPEN = 'X'.
ENDIF.
LOOP AT ITAB.
IF FL_OPEN = SPACE.
Create new session
CALL FUNCTION 'BDC_OPEN_GROUP'.........
IF SY-SUBRC = 0.
   FL_OPEN = 'X'.
ENDIF.
ENDIF.
Here elaborate your data and fill BDCDATA
Insert the transaction:
CALL FUNCTION 'BDC_INSERT'
IF SY-SUBRC = 0.
COUNT = COUNT + 1.
IF COUNT = COUNT_MAX.
    COUNT = 0.
Close the session
    IF FL_OPEN = 'X'.
      CALL BDC_CLOSE_GROUP
      IF SY-SUBRC = 0.
        FL_OPEN = SPACE.
      ENDIF.
    ENDIF.
ENDIF.
ENDLOOP.
Max

Creating multiple lines of text that can be edited by one line

I was editing a file in illustrator that a past designer set up and he set it up so that there are multiple lines in a column of text that are linked some how so that the first line of text can be edited and the rest will change with it. How do you set it up to do this?

I actually needed to know how to basically set up one text box created and than copied 10 times in a column but the top text field can be edited. When the top one is edited it automatically changes all of the other rows as well at the same time. I appreciate you getting back to me though. I figured it out.
Basically what you have to do is create your initial text field. With the text box selected you go to your appearances panel and click on the effects icon at the bottom of the panel and choose Distort & Transform > Transform. Then in the transform dialogue box you choose how far you want the copied text boxes to move (to the right or left) and then how many copies you would like and hit Copy. Than all you have to do is edit the first text box and all of them will change at the same time.
It is actually a pretty neat feature and will save me a lot of time when setting up some projects.

Can a Lookup Window be used to search multiple fields w/o clicking Advanced

In our setup in R18, if a user clicks the magnifying glass to see the Lookup Window, it defaults to searching on one field -- let's say last name. Unfortunately, if they search for a common last name, like "Smith", they may get hundreds of results. Had they used the Action Bar search, they could have used first and last name and gotten much closer to the result they want (if not the specific result they wanted).
I'd like to avoid having the users click Advanced as: 1) they then have a myriad of fields to choose from, and 2) not everyone will be an expert in using "and" and "or".
If they could just use the Lookup Window they same way as the Action Bar, I'd be happy. Maybe I have it misconfigured? As it is, when I open the Lookup Window, the drop down shows the same fields I have in the Action Bar, but when I click Advanced, the fields are all blank. That's unlike the Action Bar Advanced link which pre-populates the fields I can search on.

It is not possible to search on multiple fields in lookup windows without going to the Advanced tab. Your suggestions are valid. Have you considered creating an enhancement request?

In Pages (5.5.1) can I create multiple Paragraph Styles within one paragraph?

In Pages (5.5.1) can I create multiple Paragraph Styles within one paragraph.
I need to make a table of contents for my Mater's Thesis and want to use the automatic table of contents feature. I want the first sentence of a paragraph to have a different paragraph setting than the rest of the paragraph. Is this possible?
Thanks!

Nice of you to be doing this for your Mother's Thesis.
There are several issues here:
1. A Paragraph Style is what it says, the style for the paragraph
2. You can format text within a paragraph by applying a Character Style
3. Pages 5.5.1 lets you apply formatting to overall text for the T.O.C. but not parts of it and you can not retain that formatting as a Paragraph style
So in answer to your question, no.
You will need to create the T.O.C. manually and unfortunately as Pages 5.5.1 can't create bookmarks (just one of over 100 missing features) you will be unable to link the T.O.C. to the referred pages in the list.
Peter
Apple's marketing slogan:
Pages 5.5.1 - Can't Do That!

Can you calculate multiple text boxes to achieve a total value? If so how is that done? I am trying to create a order form where multiple items can be purchased but i would like the values of each item to calculate so I can achieve a total value.

Can you calculate multiple text boxes to achieve a total value? If so how is that done? I am trying to create a order form where multiple items can be purchased but i would like the values of each item to calculate so I can achieve a total value.

Hi sashby51,
I've moved your discussion to the PDF Forms forum--the folks who visit this forum regularly should be able to point you in the right direction.
Best,
Sara

Create multiple assets (AS01) - maintain multiple fields can be configured?

Similar Messages

Maybe you are looking for