Create new field for service tax no

hello,
my client wants a new field for sevice tax for vendor in cin master maintanance. how can i create.
thanks and regards
bhakta

Hi Jim,
It is sap hierarchy you can't edit it and the thread you are referring to
it is a development they have talked about which i have told you earlier itself but that will create a problem during upgrades and you need to test it everytime after upgrade so you need to check before to go for that development.
Secondly you can go for service desk XT license there is small variation and separate license to be taken and then you can use service desk for NON SAP problem
like printer not working etc
Hope it helps.
Regards
Prakhar

Similar Messages

Creating new fields for UCCX 9.0 CUIC

I am tryin to create a Contact Service Activity report for a customer and I have 2 problems.
1st I have created a new field which I want to show the number of calls handled outsite of the Service Level.
The formula I have created is SUM(${calls_handled})-SUM(${handle_sl_met}) this works fine for the totals, however I am getting the overall totals on every Service line . Within Edit Properties i have just put in (${calls_handled})-(${handle_sl_met}) thinking that would sort the individual service lines, however it is still showing the overall total number!
The 2nd problem I have is that I want to run the same report so that it show multiple day summaries for each service.
Date        Serv         Off     Hand    Abnd
3rd Oct Cust Serv    25         23       2
3rd Oct Acounts      15         12       3
4th Oct Cust Serv    32         29       3
4th Oct Acounts      27         26       1
When I run the report for start time 3/10/2013 to 4/10/2013 for entire range - grouping by start time - summarising daily.
it show as follow
Date        Serv         Off     Hand    Abnd
3rd Oct Cust Serv    57         52       5
3rd Oct Acounts      42         38       4
Has anyone done this if so can you advise as it is now extremely urgent.
Thanks Sarah

Hi,
from the UCCX 9.0(1) SRND:
Cisco Unified Intelligence Center is the web-based reporting platform that is packaged as part of the Cisco Unified CCX 9.0(1).
Regardless of license level (Premium, Enhanced or Standard), CUIC is there, on the same server.
Not sure if you can install it or move it to a separate server - I guess the answer is no.
About the licenses: you'll have to decide whether you'll be able to use the full feature set (if you need HTTP applications, Databases, custom Java classes, then go Premium), or not (then it's either Enhanced or Standard). Again, CUIC will be there, with unlimited users.
About HA - if you mean High Availability, UCCX supports that, out of the box, it's actually an active-inactive server pair. You'll need a separate license for that, too, as far as I know.
Good alternatives to CUIC: personally, I prefer BIRT. But there's a long list of reporting platforms. Some SQL knowledge is a plus.
Hint: the SRND is a great way to start. The amount of information there might be overwhelming, but all the details are supposed to be there.
G.
Message was edited by: Gergely Szabo
A list can't be wide.

Create new components for service desk

Hi All,
For Service Desk, to use it for non-SAP components, we are planning to create new Z* components. Can some one tell me how to do it? From reading through the messages, I can see that adding entries to tables - dswp_csncomp and dswpcsncomptxt should be able to create the components. When I tried going to SM30 and provided these table names, its not letting me maintain the tables. When i click Maintain, it gives me the message - "The called function with the view/table DSWPCSNCOMPTXT needs a special maintenance dialog which, however, either does not exist at all, or does not exist completely" - Can some one tell me how this can be done - please ?
Thanks!

Hi Jim,
It is sap hierarchy you can't edit it and the thread you are referring to
it is a development they have talked about which i have told you earlier itself but that will create a problem during upgrades and you need to test it everytime after upgrade so you need to check before to go for that development.
Secondly you can go for service desk XT license there is small variation and separate license to be taken and then you can use service desk for NON SAP problem
like printer not working etc
Hope it helps.
Regards
Prakhar

Accounting entry against Excise invoice not created for Service Tax sales

Dear all,
I am facing one problem related to accounting entry against excise invoice not created, for service tax sales scenario in SEZ plant.
Accounting entry against billing document is generated,which contains revenue account-Debit entry,service tax 10% --Debit entry,ECS-Service tax 2% --Debit entry, SECess Service Tax 1% --Debit entry & Sundry Debtors (Reco) - Domestic(Customer receivable reconciallation) account-Credit entry.
But after generating excise invoice, accouning entries not generated for clearing of Cenvat suspense entry(i.e.service tax 10% ,ECS-Service tax 2% , SECess Service Tax 1%) which is generated during billing document.
Plz. suggest step by step guideline to resolve this issue.
Thanks & Regards,
Mukesh Pardeshi

Hi ReazuddinMD,
thanks for your reply and support...I checked all the entries/accounts maintained correct.. but the Accounting entrys against Excise invoice not created..
Now i am geeting error as below at the time of saving Excise invoice,
No account is specified in item 0000000001
Message no. F5670
Diagnosis
No account was specified for account type "S" in item "0000000001" of the FI/CO document.
System Response
The Financial Accounting program cannot process the document.
Procedure
A system error has probably occurred in the application you called up. Check the data transferred to item "0000000001" of the FI/CO document.

How to create a new field for Q3 - QM notification in Header and item level

Dear All,
l
Sub: How to create a new field for Q3 - QM notification in Header and item level
Ref. the link --> Quality Notification
We want to create a new field in header level and item level.
As per the thread the solution is given below.
In the IMG Config: Quality Management -> Quality Notification -> Notification Types -> Define screen areas for notification types Then Choose 'Define screen areas' Then Click on 'New entries' button Now, select the relevant Notification Type and click in 'Enter'. Select the 'Iten Cases' register and remember to setup the Tabstrip Header, Icon, etc. Set the 'Tabstrip active' flag. Then Save.
Quality Notification -> Notification Types -> Define screen areas for notification types
WE ARE UNABLE TO FIND IN CUSTOMIZATION PATH --> DEFINE SCREEN AREAS FOR NOTIFICATION TYPES.
Please help.
Question No. 2 :
THE REQUIREMENT IS GIVEN BELOW.
We want to hide the field in Q3 - QM Notification
In header --> Reference tab --> Item (sub heading) --> "DEFECT LOCATION" FIELD TO BE ELIMINATED (HIDE)
Ref the link --> Quality notification
The solutiion is given below.
Hi Sami,
We can hide the collumns using the Transaction OQM1 and Program Name SAPLIQS0.
Lets say Defect location need to be hidden, the field TXTCDOT need to have the radio button HIDE.
Hope this will suffice your requirement.
Kindly ask me if you need any other details.
Thanks & Regards,
Srinivas.D
Hi Sami,
We can hide the collumns using the Transaction OQM1 and Program Name SAPLIQS0.
Lets say Defect location need to be hidden, the field TXTCDOT need to have the radio button HIDE.
Hope this will suffice your requirement.
Kindly ask me if you need any other details.
Thanks & Regards,
Srinivas.D
By double clicking the "DEFECTIVE QUANTITY (EXTERNAL), WE COULD NOT GET --> field TXTCDOT .
Plese do the needful.
We are using ECC6.0 Ehp3 and Ehp4.
With Best Regards,
Raghu Sharma

Dear Pushpa,
Transaction Code :SHD0 is working fine.
Please accept my sincere thanks for your sharing your Knowledge.
I am able to fulfill my
Regarding the enhancement, I have not tried.
Once I will complete, I will award the fulll marks to you.
With Best Regards,
Raghu Sharma

Need Help to create new screen for RF Sapconsole

Hi Guru's
I'm new on RF (but some years in ABAP) since last week.
I need help to create new screens for RF (SAPLLMOB).
Can someone explain me the procedure to create screen (with ABAP code after) or perhaps someone have an exemple (simple or not) ?
I have to develop 2 new screens with really few time.
And, another subsidiary question :
how SAP can transfert information between the flash gun and the screen i have developped.
Is there some code to add to enable this functionality or it is include in SAPLLMOB on standard fields ????
It's a new strange world for me today...
Many thanks to everyone who can explain me
Alain

hi,
I am facing this problem as well. Is there any reference to create the new screen?
Hope someone can help! Thanks!
Regards,
Darren

How can I add a new field for Belgium in T588M?

Hi experts,
I am trying to change the infotype 0002 screen for BElgium. This is how I am doing T588M > new entry > MP000200 > alt. screen 2012 > var. key 12 > feature p0002 >.
I also maintained 12 as the var. key for the countr yBE in P0002 feature. I want to add P0002-GBDEP (state) field which is already there for MP000200 screen 2000 which is the SAP standard screen. why it does not copy this field when I create this field for Belgium. HOw can I bring it for BEl. Please advise.
Thanks a ton,
JEss...

As P0002-GBDEP is not included in screen '2012', you'll need to create an additional custom screen to show this field. Then, you'll need to config table 'T582C' to have 'MP000200' / screen '2012' to have this custom screen as an 'include' screen (e.g. if your new custom screen is ZP000200 / screen '0100', then in T582C, you'll need an entry with 'MP000200' '2012' ZP000200' '0100'.

While adding custom field in urgent change-Create new field button in AET is not coming

Dear All,
we have requirement to add some custom fields in urgent change document. while adding custom fields using AET, create new field button is not coming.
Thanks in advance. points will be awarded.
Rahul

Hi Jignesh,
Thanks for your valueble inputs, it really helped me to understand the process.
I checked in Web UI configuration for urgent change document as you mentioned but still that button is not coming.
In transaction BSP_WD_CMPWB, i have created enh. set: Z_ENHANCEMENT_SET.
Can you tell what to selelect in application and page popup which comes after selecting Enhance component button. Actually i tried but i am not able to add new record in conf.
Thanks in advance.

Creation of Service Tax code for Service Tax Payable

Hi
Please advise me to create service tax code for service tax payable
Thanks and Best Regards
Shekhar
Edited by: Shekhar Yecham on Sep 16, 2008 8:28 PM

Hi Randeep,
As they said it is service tax GTA.Right we are doing out of SAP, we want it to be done in SAP
The tax calculation will be like below
service tax of 10.3% has to caluclate on the 25% of the Base amount. Like
25% is taxable and 75% is livied.
Base Amount - 100.00
25% of the base amount(100/25) = 25.00
service tax(10.30%) to be calculate on Rs. 25.00
25*10.30% = 2.57
Base amount --> 100.00
Service Tax --> 2.57
Total: 102.57
Regards,
Siva.

How to create new field while upgrading from CRM 4.0 to 7.0

Hi ,
How do we create new field on UI and store data into existing field in database?
Is there any option in AET to skip the creation of new field in the database table ?
Custom field is already created in GUI and database table while using CRM 4.0
Now, after upgrading to 7.0 EHP3 , I need to bring this field on the UI .
Using AET may create new field again in the database table.Please suggest.
New filed needed to be created in Marketing Campaign Element Header data.
Thanks
Jayasri

Hi Jayasri,
As a custom fields are already there in crm 4.0. You don't need to use AET again to add field.
These enhancements still exist after the upgrade. Dependent on the enhancement object and type some manual steps are necessary.
For example regarding a single field enhancement for the BP the whole framework is enhanced after the upgrade. There is only one manual step to bring the field on the relevant view(s) via the UI Configuration Tool. For whole BP tables some more manual steps are necessary, these steps are described in the note 1069791 - CRM WebClient UI for EEW enhancements (reference to more notes regarding the EEW after the upgrade).
For set types, we need to generate UI With the help of the UI configuration tool the settypes could become visible in the Web UI.
I didn't understood your scenario, can add little more information why you want to add field by AET if available in DB?
Refer
FAQ - SAP CRM Upgrade from release 4.0 to 7.0
Regards,
Arjun

Structure S955 cannot be enhanced (creating new fields is not possible)

If I try to append in table S950.I am getting error mess like this<b>."Structure S955 cannot be enhanced (creating new fields is not possible)"</b>I have to change any settings?

Maybe this OSS note will help you : Note 527083 - Changes to info structures
https://service.sap.com/sap/support/notes/527083
Regards

Not able to perform j1iex for service tax capturing

The service PO is similar to that of any other PO in terms of taxing.
In service tax we will have
Service tax          - 12 %
Education cess          - 2 %
Surcharge          - 1%
So for service tax code we will be maintaining three rates in the Tax code.
Follow the below process for Service Cycle :-
1. AC01 - Create Service master in AC01 and assign the Valuation Class for the Service Masters and do Account
                 Determination in OBYC for A/c Key GBB and Valuation Modifier VBR (to this Assign the Service Expense A/c) and
                 for A/c Key WRX, assign GR/IR Clearing A/c
2. ME21N - In PO (ME21N), use Item category as "D" (Services) along with Account Assignment Category "K" (Cost Center)
                    and In "Services" tab, specify the Service Master and pricing details
3. ML81N - Create Service Entry Sheet w.r.t. Service PO
Service Expense A/c - Dr
GR/IR Clearing A/c - Cr
4. MIRO - LIV for Service Entry Sheet or Service PO
Service Vendor A/c - Cr
GR/IR Clearing A/c - Dr
Service Tax A/c - Dr
Ed Cess on Service tax - Dr
Sec Ed Cess on Service tax - Dr
In normal purchase order having excise duty we would perform a t.code j1iex once for capturing excise and again for posting excise duty.
we want same step between step 3 and step 4 for service tax also. can anyone tell us how to achive that.

Hi
We dont have the provision to maintain registers for service tax.
so there is no question of capturing service tax thro J1IEX.
Service tax is posted to a G/L account at the time of MIRO.
We will utilize this service tax input credit at the time of monthly utilization (J2IUN) where in there is option for giving this G/L account.
then the amounts of input service tax will be populated in the screen.
regards
prasad

NEW FIELDS FOR PRICE DETERMINATION in MM

Hi all experts,
we have added new field in customizing so that in the purchase order in MM we can use new fields for price determination.
However we do not finde the exit or program were we can set a value for these fields.
for instance, we want to differenciate countries belonging to the EU and not. We create a yes/no field and get its value from table T005 where each country has this info. Everything seems to be ok, but our field is not populated into KOM* tables and therefore we don't go through the condition price...
Any ideas? Thanks.

Hi,
You can try using Info Record.
Thanks,
Venkat

Problem in creating new field using AET

Hi ,
We are facing a problem while creating a new field using AET.
[http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414900)ID0190611650DB01471683520393954021End?blog=/pub/wlg/12716]
Im following this blog while creating the new field using AET.
After filling all the field details and trying to create a Transport request its going for a runtime error.
The error is happening in class CL_CRM_GENIL_AXT_API
method get_editable_properties.
data lr_field_ext type ref to cl_genil_field_extension.
field-symbols <axt_field_extension> type gtype_field_extension.
data lr_fieldext_ref type ref to if_axt_field_ext_access.
read table axt_field_extension_tab assigning <axt_field_extension> with key ext_bo       = is_key-ext_bo
                                                                          ext_bo_part = is_key-ext_bo_part
                                                                          extension_id = is_key-extension_id.
lr_field_ext = <axt_field_extension>-axt_extension.
if sy-subrc = 0.
While Debugging we can see that the table axt_field_extension_tab is having zero values during the last execution.
But the Zfield is getting generated and the status is in green.
Any suggestions will be highly appreciated.
Regards,
Sijo.
Edited by: sijokjohn85 on Sep 9, 2009 1:00 PM
Edited by: sijokjohn85 on Sep 10, 2009 12:49 PM

Hi,
you posted the same question again in a later post.
Here is my answer:
Hi,
the reason that AET does not work is because there is/are missing entries in one of DB table.
Namely the enhance BO assignment to the UI Object Type.
Could you please tell me, what is the UI Object Type in you current IC application.
In order to figure this out, you can put mouse cursor in one of the field in the UI and then press F2.
Then you can go to SM30 in SAP GUI open the View BSPDLCV_OBJ_TYPE and search for the UI object type.
Select the UI object type and see whether any enhanced BO is defined.
In your case it should be empty, otherwise you can use AET in IC.
And if it is empty we need to figure out which enhanced BO is relevant for the given UI Object Type.
Regards,
Steve
P.S. But still you can raise a CSN message.
The "Create New Field" should be in active mode.

How to create new field groups in AA master data screen layout?

Hello,
We are using ECC 6.0
We have created bunch of new fields for asset master data, but we want to make them visible only for particular asset class. So we need to customize in SPRO Asset Master Data Screen Layout, but there no specific field groups that we can customize. So how to create and add new field groups to manage them by radiobuttons Required, Optional, No or Display?

hi,
think, it's not possible.
look here:
http://help.sap.com/saphelp_47x200/helpdata/en/4f/71e05a448011d189f00000e81ddfac/frameset.htm
"The field groups and their respective fields are defined in system tables"
kind regards
Andreas

Create new field for service tax no

Similar Messages

Maybe you are looking for