Create output messages NEU on BAPI POs

To all:
I need help, I am a functional person, and I am working with an ABAP developer on a workbench.  We are doing changes to Purchase Orders through a BAPI - ME22 / ME22N. SAP standard will create an output message after a change is made on the PO if the configuration is properly setup.  I am having problems creating this NEU output message with a BAPI, the programmer told me it can be done, but he doesn't know how to do it. 
I need help please, does anybody knows how to do this? It is very critical for my project.
Thanks for the help!
Claudia

hi check this..
this is the simple step by step procedure to create the bapis ..this is done by the develoupers(abapers) no need to do anything by the functional people ...
if you had interest you can see the screen shots for creation of bapi..
http://www.****************/Tutorials/BAPI/CustomBAPICreation/page1.htm

Similar Messages

  • BAPI to create output messages in material document?

    Our stores manager has a list of material documents which require a repeat output. There are far too many for someone to manually go into each document and create a new message in the output options.
    Is there a BAPI or transaction which can be used to create output messages for multiple MIGO material documents? 
    The ones required in this case are WE03 output messages.
    Many thanks
    Karen

    Sorry, I should have said that the original documents were printed as WE01 outputs when they should have been WE03. We need to create new messages with WE03 as the type not WE01. Therefore it is not just a repeat output.
    Therefore I don't think we can use MB90. Also it doesn't appear to let you enter multiple material documents.
    Does anyone else have any ideas.
    Thank you
    Karen

  • How to produce Material output message when use bapi function?

    Dear Experts :
    I use bapi BAPI_GOODSMVT_CREATE to receive stock.
    I find the output message can't create automatically even when I have set the type in MR21.
    Hope someone can teach me how to produce the message when I create the material document by BAPI function.
    Thanks a lot.

    Hi,
    The messages are stored in the return table of the bapi.
    You can search in SCN or Google for BAPI error handling.

  • Problems in output messages for PO.

    Hi Experts,
    We have a problems with output messages determination, if I have the PO without release approval the system send the output messages ( NEU ) I need that determination doesn't occurs when the po status is unapproved.
    For Explo: I create the PO 45...01 with status unapproved, the system generate tehe messages ( NEU ) but doesnt send to destination, the send only happened when i make the realese.
    There is a file with more details.
    [http://www.easy-share.com/1904410163/POunapproved.doc]
    Thanks,
    Gustavo

    Hi,
    In the release strategy,if the indicator changeablity is 1 the system will not allow you to take repeat out put.
    Solution is that you have to change the release indicator changeability to 6(SPRO>MM>Purchasing>Purchase order>Define release procedure for purchase order>Release indicator>Changeability).
    Another option is that in the message output of the PO in further data change despatch time to 3 and take a repeat out put.
    Also check,
    SPRO > MM > PO > Release Procedure for PO > Release indicator > Changeability of Purchasing Document During/After Release as 2 for Release ID - G and save
    And then Create go to chage mode of PO and repeat the messages
    Regards,
    Rahul.

  • Intercompany with billing output message creates goods entries lock Purch O

    Hi Experts,
    we have a problem in an Intercompany flow.
    From each SD Invoice, an output message is triggered. This output message creates a goods entry of the related purchase order related using a batch input.
    There are many SD invoices related with the same purchase order.
    The problem happens when many output messages were processed in a massive way though a job of report RSBDCSUB.
    More that one SD invoice will create goods entries related with the same purchase order and sometimes at the same time.
    The result was that some goods entries aren't created because the purchase order is locked by one of the previous process of the same purchase order.
    We have as a workaround to re-process the batch inputs wrong, but we want to avoid this re-processing.
    is there any solution for this process? do we change the process and use IDOCs or BAPIs?
    thanks in advance,
    aupalaura

    Dear Raja
      I need 2 to get a consolidated PDF from both OTF and SPOOL
    What do i do ? how 2 proceed . Plz tell me any other solution plz .
    User wants only one PDF .
    Plz help for god sake .
    How about saving the PDF from OTF and then appending the PDF from Spool at the prompt at end of that (Any append possible at the Prompt )
    Thnx
    Moni
    Message was edited by: md monirujjaman
    Message was edited by: md monirujjaman
    Message was edited by: md monirujjaman

  • Prevent the Output Message when creating PO from inbound IDOC

    Hi SAP Gurus,
    In my project, I have to create PO from inbound IDOC (PORDCR) with a specific Document Type ('099').
    Requirement: These PO should not generate the output message while the others (Doc Type # '099') do.
    I have the Z fuction module which call BAPI_PO_CREATE for posting IDOC and it works fine.
    In the existing system, there are some set up that trigger the output message type for PO (output NEU) when using ME21 or ME22, as a result my PO created with output message.
    Can you please advise if there are some way (User Exit?) that prevent the output message in this scenario (specific PO Type) without touching the current Condition setup?
    I'm new in MM and really need help!
    Thanks,
    Elaine.

    Hi Vinod,
    I really appreciate your anwer. I'm going to explore this with my functional consultant.
    Just like to have more questions:
    1. Is it easier if we change the existing condition table instead of creating a new routine?
    2. There are two forms for routine 101 (FORM KOBEV_101 and FORM KOBED_101). Can you explain to me why we need 2 here for what purpose of each form.
    3. In the debug mode by using WE19 to post inbound IDOC, I change the SY-SUBRC = 4 and PO created without output message. Is it the right direction? Anything else I need to pay attention to?
    Thanks again.
    Regards,
    Elaine.

  • Output message type not triggered for few POs

    ---PRs got created manually. then PRs converted into POs through background job (me59n).
    ( 25 PRs got created manually with same vendor and pur.org combination then all PRs converted into POs through ME59N. In that 20 PRs had message type automatically but remaining POs haven't got the message type )
    Condition record exists with vendor/pur.org combination.
    and all IMG settings are correct.
    medium is 8 (special function).
    and not able to replicate the issue in quality systems.
    Please Advise.
    Thanks in advance.

    PRs will not get any message type, POs will get a message record.
    How is the situation now?
    Did  you get 20 POs only, or do you have 25 POs where just 20 have a message record?
    In the first case  convert the PR manually to a PO manually and see if you get a message record. You should not enter anything manually, it is supposed to work without entering anything manually because it was meant for auto PO. In case you have to enter anything manually, then this might be an indicator why auto PO could not work.
    if the latter case, then compare a PO with and without message record on the fields that should match with your condition record.
    Do you expect the same message type for all POs, are they all in the same purchasing organisation?
    Read and check what is mentioned in KBA 1829682 - Output type is not determined in Purchase order

  • I need output type NEU automaticaly for create purchase order document type

    Dear Experts,
    I need output type NEU automaticaly for create purchase order document type NB
    when transaction code MN04, I am doing the following:
    (1) I selected the third option Purchasing Output determination: Document type
    (2) I selected the output type NEU.
    (3) In condition records in document type , i have chosen NB.
    (4) In name its automatically coming as Purchase requisition
    Please suggest how Purchase Order NB will come

    Hi,
    Check & press F4, NB Purchase Order (for catagory F) will be there after entering PO output type NEU & then maintaion the condition record in MN04.
    Output type NEU automaticaly defaulted during purchase order creation with document type ,then just fine tune the output (message) type in following path:
    SPRO--->MM->Purchasing>Message>Output control->Message types> Define message type for Purchase Order----->Fine-Tuned Control: Purchase Order
    Now here select the check box corresponding to your output(message) type NEU to have print output automatically displayed & save.
    Now try to creating Purchase Order & you will have default message type NEU.
    Regards,
    Biju K

  • Create Sales order through PO by output type NEU

    Hi friends,
    I want to create Sales order out of a PO. I used the output type NEU of PO and was successfully get ourbound IDOC posted. But my inbound failed.
    Two erros message:
    1.The material number for item 000010 could not be identified
    2. Partner number XX01 for customer XX01 , partner function WE does not exist
    Although I can manually create the sales order with exact same info.
    I used message type ORDERS04 for both partners and use ALE as a transmition.
    Thanks in advance!

    hi ,
    Can you please tell me it for the same company code or different company code.
    maintain the customer material info record , if it is a different company code. the system is checking the qualifier.
    thanks
    Kuntla

  • Both Message output types NEU and ZNE1 coming

    Dear All,
        I have created a RFQ. In the message I can able to see both message output types NEU and ZNE1.I have configured for ZNE1.  I want to stop NEU in my message of RFQ.In the RFQ document only ZNE1 should appear. I am using  the procedure RMBEA1 for both output types.
    Can you please give me any tips?
    With Regards,
    Jaheer.

    Hello Friend,
    First check that any output record has been maintained for that output type with the vendor and article combination / any comb..
    If no, then search for an user exit (there should be one) where you make sy-subrc = 4 for that particular output type..
    so that it should not appear...
    Hope it will help you..
    Rgrds
    Krish

  • Output message can not be created in a PO

    Hi to you all,
    Output message can not be created in a PO for a customer. During my tests, the yellow output message was created automatically after I have saved the PO.
    I checked ME9F and the table NAST, there is no entry for the PO of the customer. This happens arbitrarily.
    Do you know how and why this can happen? Is it a program error or something else?
    Thanks.
    Esra

    Hi Esra,
    if I do understand you correctly, when creating the PO the system always finds a message to be created ("yellow" message). But arbitrarily the message cannot be generated in ME9F, correct?
    In my view, if the message is always determined correctly in the PO there cannot be any trouble concerning condition records, the error has to occur later in the process.
    Are there any error messages in the processing protocol of a message that cannot be created? What happens if you set the transmission time-spot to 4 (immediatelly)?
    Just my 2 cents
    Alicia

  • Create Support Message via BAPI with additional partners

    Hi all,
    i need to create a support message (slfn) via  bapi / function module. The basic creation is no problem with BAPI_NOTIFICATION_CREATE.
    But i need to set additional partner(functions) like "approved by" in the support message. With this bapi i can only set the processor and creator of the message.
    How can i add additional partners via BAPI call?
    Any help would be much appreciated.
    Daniel

    Hi Daniel,
    i do not think there is a standard functionality for this.
    you can use function module CRM_DNO_UPDATE_PARTNER to set partner functions to a message. You will have to build your own RFC enabled function module around this, though.
    Then you can use it to add your partners after the message was created.
    Regards,
    Christoph

  • Partner function copied from PO to Outb.del. but output message not created

    Hello Gurus,
    As the copy of the partner function from the PO to the Outbound Delivery is not supported in standard, I have activated userexit_save_document_prepare (MV50AFZ1) where I can add the other partner roles out of the purchase order into table XVBPA (VN). Thanks to this exit, the partner function VN is correctly added in the Outbound Delivery.
    My issue is the following this partner function should create an output message using the partner function VN but this one is not created during the Outbound delivery creation. But if I go to the VL02N and just save the Outbound delivery again (without change) now the output is correctly created and processed.
    Does someone of you know the reason why the output message for partner VN is not triggered at the Delivery Creation but
    after the manual save?
    Kind regards
    Chris

    I have just explained this in Copy partner from PO to inbound delivery

  • Output Message for Purchase order not being created Automatically

    Hi all,
    I created a Condition type for Purchase order in MN04 with key combination "Doc.Type/Purch.Org/Vendor". The problem arises when i delete this condition record. After deletion when i create purchase order in me21n for that condition type, the system gives an error.
    Message no. 06261 - No message generated for output of purchasing document.
    Is there anyway the purchase order message is created automatically again when its condition type has been deleted from MN04.
    - Regards
    Sahar Khalid

    Before creating the entry in MN04 the message was being created automatically. I want the system to create the same output message as it was creating before the creation of the entry in MN04.

  • Manually create an output message for GRs

    Is it possible to manually create an output message for a GR that has never been printed?  There was an issue with our output determination and we have a GR that never had a message created when saved so I can't use MB90 to print it.  The problem with the output determination settings has since been resolved; however we need to find a way to print this GR.  Is there a manual procedure?
    Thanks!

    Hi
    You can go to MB02 (material document change), enter material document. Double click on quantity, You can find messages button on the top.assign output and print the same.
    regards
    Srinivas

Maybe you are looking for