Create tablespace syntax for raw disk on Solaris

Hi!
I want to create a tablespace over /dev/rdsk/c1t1d1s5
I tried with
svrmgrl>create tablespace rawtb datafile '/dev/rdsk/c1t1d1s5' reuse;
Is this the proper way of creating tablespace over a raw disk?
Can one specify a "filename" to this raw device (w/o a symbolic link creation) for example "rawtb.dbf" ?

hi
u just create a symbolic link using ln command. use that in the create tablespace command.directly u can't do that by specifying the raw device name.
regds
vamsee

Similar Messages

After creating RAID 5 for hard disks, CIMC shows Modrate fault

Dear all,
There are two UCS servers which the model is C240 M3
When I created RAID 5 for hard disks, CIMC shows Modrate fault.
The warring message is
storage virtual drive 0 degraded: please check the storage controller, or reseat the storage drive ucs
anybody has idea for this case? Thank you!

Is it an solution? Thank you!
The warning message appears if you do not have a Battery BAckup Unit Instllated on the server. I just worked with Cisco TAC and following is the solution.:
1. Launch KVM Console of the server
2. Power Cycle the Server
3. When LSI RAID configuration window displays, press CTRL+H and start the RAID Configuration Utility.
4. Click on Virtual Drive. Example Virtual Drive 0.
5. Change Default Write Mode to "Write Through" and click "Change"
6. Press "Yes" to take the effect.
7. Exit from RAID Configuration Utility nad restart the server.
From:
https://supportforums.cisco.com/discussion/11842501/ucs-c220-m3-megaraid-9266-8i-cache-degraded

How to create Shared RAW disk on solaris 10?

Hi,
I have built two solaris machine using VMware. I am going to configuare RAC. how to create shared RAW disk for ocr,votedisk and asm?
OS version = 5.10 32 bit
Thanks

use openfiler ( software based SAN) if do not have shared disk storage system, this is an appliance kinda software can behave as SAN storage, it can be installed on VM as a guest machine and rest configuration remain same as storage and your RAC deployment.
http://www.openfiler.com/community/download
alternativly you can follow below method
http://startoracle.com/2007/09/30/so-you-want-to-play-with-oracle-11gs-rac-heres-how/

The BEST create tablespace options for 9i

What is the best create tablespace command with options to create a tablespace that will be used for a partition in a partitioned table that will potentially get very big with lots of users and lots of data for a very big OLTP database?

I would prefer locally managed tablespaces with uniform extent sizes. For the segment space management, it depends on the concurrency of transactions on this table, but I would prefer automatic segment space management generally.

Error when creating ssh keys for Oracle RAC on Solaris 10

I'm in the process of configuring 2 node oracle cluster running on Sun cluster 3.2 /solaris 10 OS.
I have followed this oracle guide to when creating keys (oracle document No =B14205-01)
But im having problem when executing this step
bash-3.00$ scp authorized_keys tsavo-east:/oracle/.ssh/
ssh: connect to host tsavo-east port 22: Connection timed out
lost connection
bash-3.00$
Please advise
Thanks
Francis Mwangi

Robert Thanks alot for your reply. have a look of what i found out
ps -ef | grep sshd
root 4270 4267 0 16:22:46 ? 0:00 /usr/lib/ssh/sshd
root 759 1 0 Nov 09 ? 0:00 /usr/lib/ssh/sshd
root 4267 759 0 16:22:41 ? 0:00 /usr/lib/ssh/sshd
root 4372 4311 0 18:56:52 pts/3 0:00 grep sshd
===================================
netstat -a | grep ssh
*.ssh *.* 0 0 49152 0 LISTEN
tsavo-west.ssh 10.30.210.213.2241 63668 51 49640 0 ESTABLISHED
*.ssh *.* 49152 0 LISTEN
6002b4aec88 stream-ord 6002b5a0740 00000000 /tmp/ssh-mgPl3398/agent.3398
==============================
telnet tsavo-west 22
Trying 10.20.3.151...
Connected to tsavo-west.
Escape character is '^]'.
SSH-2.0-Sun_SSH_1.1.1
#has hanged here for the last 10 minutes
Thanks please what can you conclude from above; also from the console monitoring both nodes
i saw messages that end with
LINK-3-UPDOWN: Interface Dot11Radio0 , Changed state to up
#another line here
LINK-3-UPDOWN: Interface Dot11Radio0 , Changed state to down
#another line here
LINK-3-UPDOWN: Interface Dot11Radio0 , Changed state to up
this happens on both nodes
Any idea
did i use the right document. have other steps that works (anyway not sure if this error are related to the stepsfor configuring ssh)
Please help if you can ....

Can I create separate events for RAW files and JPEG files of the same photo?

I recently changed the setting on my camera to take both a RAW and JPEG image. I now have a large number of photos in both formats in the same event. I'd like to separate all the RAW and JPEG photos into separate events. Is it possible to do this in a batch process versus trying to move individual files? I use iPhoto '11, version 9.4.3.
Thanks,
Peter

Yes. Create a smart album with the criteria Photo is RAW:
Then you can select all of the photos in the smart album and use the Events ➙ Create Event menu option to move all of the RAW photos into a new event.
OT

List of Raw Disks

Is there any way of programmatically finding out what raw disks are attached to a system, then writing a list in the form CxTxDx to a text file?
Either by scripting or a "C" function calls would be fine

Alternatively how can I find out whether a given disk in the form CxTxDx exists?
(Again I need to do this programmatically - I'm trying to create a list of raw disks that I can then use to run prtvtoc for each disk on the system)
Kevin

Any way to create tablespace with name greater than 30 characters ?

Is there any way to create tablespace greater than 30 characters on solaris 10 and Oracle 10g. Any way ? because i have no other option.

desc dba_tablespaces
So clearly the answer is NO.
Tablespace names are invisible and irrelevant. Why the question?

OCR and vote disk Allocation for shared raw storage with Solaris 10 questio

Hi all,
Current environment is Solaris 10 SPARC 64 bit OS with Hitachi SAN for shared storage and Sun E6900 servers.
For Oracle 10g RAC (10.2) and ASM, I am setting up the vote disk and OCR files on shared raw storage area network.
Assume that I have a 35Gb LUN carved out on raw device for the vote disk and OCR for a 2-node Oracle 10g RAC cluster and since the vote disk and OCR only require 120MB of storage, is there a way to use only a 120MB slice from the LUN or do I need to allocate the entire LUN/raw device to the vote disk?
I am looking for a way to avoid wasting space for the OCR and vote disk with my 10g RAC cluster and we are using raw devices and Oracle 10g RAC Clusterware with Veritas filesystem for the disk management. Can I have several slices on Solaris 10 with raw shared storage (Hitachi) to triple mirror my OCR and vote disk files?
It seems odd to have to use an entire 35GB LUN just for 2 small files: vote disk and OCR. Is there a way to partition a 120MB slice on one of the devices and allocate the rest to ASM?

Hi
In our RAC env.
we have 1GB LUN for OCR and Voting Disk and 100GB LUN for ASM disk. we have 4 Node RAC env on AIX with 2 SAN storage on Hitachi system for our Application.
we keept 1st Voting diks on SAN-1 2nd Voting Disk on SAN-2 and third voting on SAN-3.
OCR disk on SAN1 and OCR_MIRROR Disk on SAN-2.
we have ASM DIsk with Normal Redundancy . Failure Group 1 on SAN-1 and
Failure Group 2 on SAN-2
Regards
Bharat

Create tablespace using RAW device

Hi,
When you create the tablespace using RAW device, you no need to specify the size parameter in the sql. It works in Solaris but not in Linux.
I dont know why, can anyone experience this issue before? please let me know
Thanks
Veera

My advice for you would be to always include SIZE parameter when you create tablespace, redo log file on raw device.
Best Regards
Krystian Zieja / mob

ORA-01658: unable to create INITIAL extent for segment in tablespace

NEW REPOSITORY INSTALLATION ERROR!!
I want to install a new Repository using Oracle9iR9.2.0.1 and iDS10g on windowsXP Professional the same machine.
After running all the SQL scripts ( ckqa,ckvalqa,ckcreate,ckreport) with success to installing a new Repository on my Database using "the Scripts Method",I start the Repository Administration Utility( RAU) to scheck the priveleges and so on.
After pressing the Install button in the RAU:
-I take public synonyms
-I scheck the box for "Support Designer Objects", then
-The Repository size is Medium
-I have not change the defauft Tablespace of the Repository_Manager names TEMPORARY_TABLES to store the index and table of System Data....Diagram Data.
After Starting, the Installation began an stop by installing some Tables like schown :
Operation: Started : 07/03/04 20:26:32
Reading File: cktabs.sql
Object : TABLE CDDL_TMP_TBL
Executing statement(s)...
Verifying...
.and so on till....uns so weiter bis
Reading File: cktabs.sql
Object : TABLE RM$INFO
Executing statement(s)...
Error Submitting Definition: User intervention required...
RME-02124: Failed to execute SQL statement: CREATE TABLE RM$INFO
(NAME VARCHAR2(128) NOT NULL
,VALUE VARCHAR2(128)
Storage (initial 4K next 4K pctincrease 0) Tablespace TEMPORARY_TABLES
ORA-01658: unable to create INITIAL extent for segment in tablespace TEMPORARY_TABLES
Dumping Buffer...
CREATE TABLE RM$INFO
(NAME VARCHAR2(128) NOT NULL
,VALUE VARCHAR2(128)
...End of Buffer
User Requested: Stop Process
When I read the Help of the Error the
CAUSE was: Failed to find sufficient contiguous Space to allocate INITIAL extend for Segment being created.
ACTION: Use ALTER TABLESPACE ADD DATAFILE to add additional space to the tablespace or retry with a smaller Value for initial.
I then try to resolve it by schecking and changing the Values of INITIAL_VALUE and NEXT_VALUE in the ckparams.txt to 500k.I change the Values of TEMPORARY_TABLES(10214 to 51200k) and TEMPORARY_INDEXES from (20000 to 100000k).Then I run the scripts @ckparams.txt, @ckvalqa, @ckcreate but
-pressing the Scheck Privileges Button on the RAU still give me 106k for the INITIAL_ and NEXT_VALUE.
-And the installato still stop with the same Error.
Question: How schould I resolve this Configuration?
You could respond in ENGLICH, GERMAN or FRENCH
Thank you for your Help!

You are running into database errors. You should refer to the database documentation on how to adjust the size your tablespaces. The online Designer installation guide will advise you as to the sizes of tablespaces you require. (http://otn.oracle.com/pls/wocprod/docs/page/ocom/technology/products/designer/supporting_doc/Des10g_9044/cmnhlp72/rep_insgde/igttl_9i.htm)
Regards
Sue

Creating a Master virtual hard disk and using the same for all other VM's

Hi,
We would like to create a master virtual hard disk and use the same for all other VM's. Can we do that ?
my requirements :
1) create 10 VM's
2) first create a master virtual hard disk with win OS and use the same to create the 10 VM's.
3) After creating the VM's change the HDD size.
              -- if i have created master virtual disk with 500GB , and use the same for creating a virtual machine. can we change the HDD size to 1TB ?
After creating the VM's ,i will change the system names and activate the windows accordingly.
Will there be any implications ,if we can/will do like this.
Thanks.

Hi Suren424,
I think Using Differencing Disks may cover your needs .
Please refer to following setps:
   "Create the Parent Virtual Machine Configuration and Virtual Hard Disk
    Install the Operating System, updates, and common software
    Generalize the installation
    Prepare the parent virtual hard disk
    Create the differencing disks
    Create virtual machines that use the differencing disks
For details please refer to follwing link:
http://social.technet.microsoft.com/wiki/contents/articles/1393.hyper-v-virtual-machine-vm-parent-child-configuration-using-differencing-disks.aspx
Hope this helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How do I create a backup DVD OS disk for my new mac mini ?

how do I create a backup DVD OS disk for my new mac mini ?
in case of failure HD etc
no disks came with it

No disk-version of Lion, but a Lion Thumb Drive http://store.apple.com/us/product/MD256
For the downloaded OSX Lion form the Mac App Store you can use this http://www.macupdate.com/app/mac/39701/lion-diskmaker to make yourself a disk.
And have a read here http://www.afp548.com/article.php?story=getting-lion-installers on how-to get/make a machine-specific OSX Lion installer disk.
Stefan

Syntax for creating foreign key across users in a database

There are two user present A,B.They are granted all privileges.Now in USER A, there is a table PARENT whose primary key is PARENT_NO.In USER B I have created a table CHILD whose primary key is CHILD_NO.
In the CHILD table of USER B, I want to create a foreign key relation to the PARENT table of USER A.For this I have created a column CHILD_PARENT_NO in the CHILD table.If anybody knows the syntax please post the syntax for creating the required foreign key relationship?

Please post your code. Cut'n'paste from SQL*Plus like this...
SQL> conn a/a
Connected.
SQL> desc t1
Name                                      Null?    Type
COL1                                               NUMBER
COL2                                               VARCHAR2(10)
SQL> grant references on t1 to b;
Grant succeeded.
SQL> conn b/b
SQL> create synonym a_t for a.t1;
Synonym created.
SQL> alter table test add constraint fk foreign key (n) references a_t(col1);
Table altered.
SQL> Note that Oracle will translate the synonym anyway...
SQL> select constraint_name, r_owner, r_constraint_name
2 from user_constraints
3 where table_name = 'TEST'
4 /
CONSTRAINT_NAME R_OWNER R_CONSTRAINT_NAME
FK              A       T1_PK
SQL> By the way, this ...
GRANT ALL PRIVILEGES TO B;... is a mindbendingly unsafe way of proceeding. In real life you would have given user B the power to utterly destroy your database. It's always easier to start with good habits than to break bad ones so please get used to granting only the minimum set of privileges necessary.
Cheers, APC

Can we create a single bdc for raw materials , and for some other transacti

hi
can we create a single bdc for raw materials , and for some other transaction? how?

Hi Jyothsna
For one transaction you will have to build your bdc table according to the recording for that transaction and then call that transaction using the bdc table. For another transaction , you will again have to build the bdc table with the details of that transaction.
You cannot call all at one shot.
Cheers
shivika

Create tablespace syntax for raw disk on Solaris

Similar Messages

Maybe you are looking for