Create Template with Tabs

hi,
How Can i create a Appliaction template and reagion template .
Thanks
Manoj

HI Maxicosi,
I'll send you some reading material for all of this - in chapter 7 I go thru the actual configuration for dashboards. Most of your questions should be answered or at least some ideas on these items will be offered.
I'll use the same email address.
thanks, Pete

Similar Messages

Web Templates with Tabs

Hi, We have quite a few reports we have developed for users that have around 5 or 6 tabs. When we adding or remove any functionality we have to maintain each of these reports. Does anyone else have/had this issue and what is a good strategy to move away from Web Templates with tabs?
Thanks!

to my knowldge, we don't have any option... we need to maintain every time.
I can think how complex it is...if you have 5 or 6 tabs... it 's very complex. Going forward... for small change.. like adding new tab etc... you need to be very careful.
On every call... try to reset to initial every time you call a tab... then try to pass values as per the requirement. ex: Title, Filters, settings, table etc.
Initial view we will disble every thing... we will one by one... with multiple commands...
Nagesh Ganisetti.

Creating Templates with API

Hi,
I want to create a template with PL/SQL. This is a basic tamplate, the only thing I need is to create it and then the user access it to customize it.
I have viewed WWW_UI_TEMPLATE API, but it only has procedures that show the page of creation like "SHOW_STRUCTURED_CREATE", but doesn't has a procedure that create the template automatically.
Does somebody know any api that do it for me, or any another way to do it ?
Thanks a lot,
Hengel Zambrano.

I've created a responsibility with the fnd_responsibility_pkg.insert_row. The API runs ok, and I can even see the new responsibility in the FND_RESPONSIBILITY table.
But the problem is, I can't see it in oracle apps using forms (that is, can't see in the Define Responsibility window and can't even assign it to a user). What could I be doing wrong?This forms select values from FND_RESPONSIBILITY_VL (which select from FND_RESPONSIBILITY_TL and FND_RESPONSIBILITY tables). So, did you verify if you have this responsibility inserted to FND_RESPONSIBILITY_TL table?
Can you select the responsibility from RESPONSIBILITY_VL?

Template with tabs Export to excel with variable dataprovider

I have looked at examples in this forum of how others have used an "export to excel" button with a variable dataprovider but I cannot get these examples to work for my situation.
I have a web template with 2 tabs, 1 dataprovider on each. The template has an icon button for "export to excel". The code came from 0QUERY_TEMPLATE. The tabs require a JavaScript function which hides all items except for the one on the selected tab and sets the property for the selected tab. I got the code for this from the WEB API reference for BW 3.x.
I cannot get the button "export to excel" to export the selected (non-hidden) data provider. I need somehow to have a variable for dataprovider on the command to export.
Any help would be greatly appreciated.
Provided below is my template.
<object>
<param name="OWNER" value="SAP_BW"/>
<param name="CMD" value="SET_PROPERTIES"/>
<param name="TEMPLATE_ID" value="ZTEST_EXPORT"/>
<param name="VARIABLE_SCREEN" value="X"/>
TEMPLATE PROPERTIES
</object>
<object>
<param name="OWNER" value="SAP_BW"/>
<param name="CMD" value="SET_DATA_PROVIDER"/>
<param name="NAME" value="DATAPROVIDER_1"/>
<param name="QUERY" value="ZPC_010"/>
<param name="INFOCUBE" value="ZPC_M01"/>
DATA_PROVIDER: DATAPROVIDER_1
</object>
<object>
<param name="OWNER" value="SAP_BW"/>
<param name="CMD" value="SET_DATA_PROVIDER"/>
<param name="NAME" value="DATAPROVIDER_2"/>
<param name="QUERY" value="ZPC_011"/>
<param name="INFOCUBE" value="ZPC_M01"/>
DATA_PROVIDER: DATAPROVIDER_2
</object>
<html>
<head>
<link href="/sap/bw/Mime/Customer/StyleSheets/ServicePortalBWReports.css" type="text/css" rel="stylesheet"/>
<Script type="text/javascript">

</script>
</head>
<body>
<TABLE class=SAPBEXNavLineBorder cellSpacing=0 cellPadding=1 width=5 border=0>
<TR>
<TD width="5%">
<TABLE cellSpacing=1 cellPadding=2 width="100%" border=0>
<TR>

<TD class=SAPBEXNavLine><A href="<SAP_BW_URL CMD='EXPORT' FORMAT='XLS' DATA_PROVIDER='DATAPROVIDER_1'>">
<IMG alt="Export to MS Excel" src="Mime/BEx/Icons/S_X_XLS.gif" border=0></A></TD>
</TD></TR></TABLE></TD></TR></TABLE>
<TABLE cellSpacing=1 cellPadding=5 width="75%" border=0>
<TR>
<TD vAlign=top>
<P>
<TABLE cellSpacing=0 cellPadding=5 border=0>
<TR>
<TD class=SAPBEXTbsTab id=head_TAB1><A href="javascript:goto_tab('TAB1')">Tab 1</A></TD>
<TD class=SAPBEXTbsTab id=head_TAB2><A href="javascript:goto_tab('TAB2')">Tab 2</A></TD>
</TR></TABLE>
<TABLE class=SAPBEXTbsBdyEdg cellSpacing=0 cellPadding=5 width="5%"
border=0>
<TR>
<TD vAlign=top>
<SPAN id=TAB1><object>
<param name="OWNER" value="SAP_BW"/>
<param name="CMD" value="GET_ITEM"/>
<param name="NAME" value="TAB1"/>
<param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
<param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
<param name="GENERATE_CAPTION" value=""/>
ITEM: TAB1
</object></SPAN>
<SPAN id=TAB2><object>
<param name="OWNER" value="SAP_BW"/>
<param name="CMD" value="GET_ITEM"/>
<param name="NAME" value="TAB2"/>
<param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
<param name="DATA_PROVIDER" value="DATAPROVIDER_2"/>
<param name="GENERATE_CAPTION" value=""/>
<param name="HIDDEN" value="X"/>
ITEM: TAB2
</object></SPAN>
</TD></TR></TABLE></P>
<SCRIPT type=text/javascript>

</SCRIPT>
</TD></TR></TABLE>
</body>
</html>

Kevin,
Try calling a javascript function (e.g. excel_export) when the export icon is clicked on.
Using the prop array find the tab that is not hidden and then use that index to build your export command. i.e. if tab1 is visible then pass dataprovider_1 to the excel download command.
Another method would be to place a hidden field on the form to store the dataprovider and then read that field in the javascript function. You would have to update this field when you switched between the tabs.
Cheers,
Kelly

Error while creating template for ITSmobile

Hello,
I have created internet services with theme 99. Now when i try to create template with following, i get an error,
Program Name : name of Z program
Screen Number : 2000
Generating style : MOBILE mobile devices
When i press Save, i get an error message,
Template Generator: Template ITSGENMOBILE 99 HTML/BEGIN missing
Message no. ITS_GENERATE_TEMPL101
Any idea, what kind of error is this?
Regards,,,
Sunil Joyous

Hello,
you have to publish the ITS-Service ITSGENMOBILE.
Regards,
Denis

How to disabled the activation of deployed Test VMs from templates with SCVMM 2012 R2

Hello,
I have created templates with key for deploying windows 8 VMs,But i wants do not activate these VMs as it is just a test VM.
Is it possible through SCVMM to deploy VM with key without activation ?
Thanks
RICHA KM

Thanks for the reply.
My network architecture is exactly like the one described on your paper, with 2 differences:
1. I only have one host in the Production group and one host in the Gateway group
2. The first host has one physical NIC, the second host has 2 NICs, one internal and one with an Internet (routable) IP
After applying the logical switches on the hosts, I lost Internet connectivity on the gateway host (I have no idea why there is no logical Gateway Switch !!!). VMM completed the jobs with no error.
Any thoughts?

Applying a New Template to a Page with Tabs

Hi,
We use page templates for our pages. We know that you cannot add a region to a page based on a template, but supposedly you can add tabs to a page based on a template.
One template we have has a single tab on it. The web designers have been adding content to pages built on that template. When they need another tab, they add it and add content to the new region on the tab. They may do this until there are 4 tabs on the page (the original tab that is in the template, plus three additional tabs). We use this for example to collect links to memos and to divide the links onto 4 tabs representing calendar quarters.
One of the problems with this process is that the web designers have not been consistent in using uniform definitions for the region on each tab causing an inconsistent look-and-feel from one tab to the next.
I have created a new template with 4 tabs already defined and with the region properties already defined. The web designers can then add content as needed and if a tab is not required it can be marked as hidden.
The problem that I am running into is that if I try to apply the new template to an existing page, I get the following error message:
Error: ORA-00001: unique constraint (PORTAL.WWV_THINGS_NAME_UK) violated
Also, consistently the content from the original first tab is lost and there is no corresponding tab on the reformatted page. Content on the second tab appears to be OK, but content on the third tab is missing. Content on the fourth tab appears to be OK.
Can anyone tell me 1. what is specifically causing the error message, and 2. is it possible to do what I want to do or will all of these pages have to be recreated manually instead of changing the templates.?
Thanks,
Peter

You should be able to do what you are trying to do. You seem to be running into a bug. Please file this with support if possible. Based on the error message, you seem to be running into a case of duplicate names, on either items or tabs. What you might try doing is renaming the tabs, ensuring uniqueness, before changing templates. By "renaming", I mean changing the NAME of the tab, not the Display Name, by clicking Edit Tab in edit mode. Does this help at all?

I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

The template is a document in itself, it is not applied to an existing document whether it is a Pages document or a Word document converted to a Pages document.
You would need to either copy and paste content, using existing styles, or apply the styles to the converted Word document.
You can Import the Styles from an existing document and those imported Styles can be used to override the current document's styles:
Menu > Format > Import Styles
The process is simplified if the styles use the same names, otherwise you will need to delete the style you don't want and replace it with the one that you do want when asked, then the substitution is pretty straightforward.
Peter

Need help with creating template. Changes are not going through to index.html page

Hi all,
I have an issue with my template that I am creating and also a question about creating template Regions (Repeating and Editable).
Somehow my changes to my index.dwt are not changing my index.html page.
Also my other question is: For my top navigation bar and left navigation bar links, do I need to select and define each individual button or link as Repeating/Editable Region? or can I just select the whole navigation bar (the one on the top) etc...
Below are my steps for creating my template...I am kinda fairly new to using DW and this is my first attempt to making a template following the DW tutorial CD that came with DW CS3.
I appreciate any help with this...regards, Dano
-Open my index.html file
-File/save as template
-Save
-update links - yes
-Select Repeating and Editable Regions (I selected the whole top navigation bar and selected Repeating Region and Editable Region, same with the left side navigation links)
-File close all
-Open the index.dwt
-Save as and selected the index.html and chose to overide it..
When I make changes to my index.dwt it is not changing the index.html
I feel that I am missing some important steps here.....
Website address
www.defenseproshop.com

Figured out

Trying to create a template with adjustable text fields.

I need to creat a form or template with adjustable text and image fields. I need to have a background template for multiple pages that when I make a change to the template it make the changes to all pages, like the master page of indesign. I also need to have text and image fields that are specific to each page but the dimensions and placement are controled by the template,but the information inside is page spacific. What program should I use and anyone know a tutorial for help?

What you want would require elaborate programming or dealing with variables in Framemaker or InDesign (Server) to dynamically generate the output upon request. You can of course get part of the features using normal variables in ID e.g. to pull linked images based on some parameters, but generally your request sounds too complex to deal with all scenarios.
Mylenium

Is it possible to create DVD Templates with Motion for burning Blue Ray DVDs from Final Cut Pro X?

Is it possible to create DVD Templates with Motion for burning Blue Ray DVDs from Final Cut Pro X?

As far as I know, motion templates can only be used with DVD Studio Pro. FCP X only lets you add a background image to the DVD menu.

Problems with the "Create a PDF" tab

I have a customer who is trying to create a pdf from Word using the "create a pdf" tab. The PDF is created but only the colored boxes behind his text show up. He is running Win7, Word 2010 and Acrobat Pro XI (with the latest update). The same thing happens if he uses the "print to pdf" option. The Word "Save as pdf" works fine.
Word Document (image below)
PDF (image below)

It appears to be some sort of incorrect layering issue. You can fix the problem by selecting the Edit Text & Images command in Acrobat XI and right clicking on the boxes and selecting the Arrange command.
I've seen this issue occur with older .doc files opened in newer versions of Word. One thing you might try is to save out the word file to another format like RTF (make a backup first) and then resave a .docx before creating the PDF.

How to create a web template with company logo

how to create a web template with company logo . can any one help me with the steps. or any notes. thnaks in advance .
2. i have 25000 articles and client want to have a selection feild to see top article ex:50,10,20, 100, 1000 etc . same for bottom articles . plz let me know how to do it . thanks for replay . i am new bw so plz .
thanks to you all

Hi
1) Please read
http://help.sap.com/saphelp_nw04/helpdata/en/4a/c8353c51aab32be10000000a114084/frameset.htm
2) Create a condition in the Query Designer: Use a formula variable
See http://help.sap.com/saphelp_nw04/helpdata/en/73/702e39074dc93de10000000a114084/frameset.htm
Heike

How to create a stage with tabs?

I tested this code to create a stage with tabs:
{code}
public void GeneralConfiguration()
        Stage configurationStage = new Stage();
        configurationStage.setTitle("General Settings");
        configurationStage.initModality(Modality.WINDOW_MODAL);
        Group grid = new Group();
        TabPane tabPane = new TabPane();
        //Create Tabs
        Tab tabA = new Tab();
        tabA.setText("Main Component");
        tabA.setClosable(false); // da se mahne opciqta da se zatvarq tab
        //Add something in Tab
        StackPane tabA_stack = new StackPane();
        tabA_stack.setAlignment(Pos.CENTER);
        tabA_stack.getChildren().add(new Label("Label@Tab A")); // dobavq se tuka accordion
        tabA.setContent(tabA_stack);
        tabPane.getTabs().add(tabA);
        Tab tabB = new Tab();
        tabB.setText("Second Component");
        tabB.setClosable(false); // da se mahne opciqta da se zatvarq tab
        //Add something in Tab
        StackPane tabB_stack = new StackPane();
        tabB_stack.setAlignment(Pos.CENTER);
        tabB_stack.getChildren().add(new Label("Label@Tab B"));
        tabB.setContent(tabB_stack);
        tabPane.getTabs().add(tabB);
        Tab tabC = new Tab();
        tabC.setText("Last Component");
        tabC.setClosable(false); // da se mahne opciqta da se zatvarq tab
        //Add something in Tab
        StackPane tabC_vBox = new StackPane();
        tabC_vBox.setAlignment(Pos.CENTER);
        tabC_vBox.getChildren().add(new Label("Label@Tab C"));
        tabC.setContent(tabC_vBox);
        tabPane.getTabs().add(tabC);
        //grid.add(tabPane);
        grid.getChildren().add(tabPane);
        // Configure dialog size and background color
        Scene Scene = new Scene(grid, 800, 600, Color.WHITESMOKE);
        configurationStage.setScene(Scene);
        configurationStage.show();
{code}
Can you tell me how I can fill the stage with the tabs body. Now I get this result:
http://i44.tinypic.com/2zppcg4.png

Use some kind of managed layout pane instead of a group for the root. I like to use a BorderPane or AnchorPane as the root container:
// Group grid = new Group();
BorderPane grid = new BorderPane();
// grid.getChildren().add(tabPane);
grid.setCenter(tabPane);
Message was edited by: James_D (Figured out how to post code!)

Creating template from assembly with whitespace in image name doesn't work

Does there exist a Bug Tracker?
Given is the following:
A test .ova describing a simple VM.
1. this .ova is imported as assembly and successfully unpacked.
2. we have unpacked following files:
- "test vm-disk1.vmdk" (notice the whitespace in filename!)
- "test vm.ovf"
3. assembly is shown in web gui
4. create template from this assembly
5. webgui shows progress but the process will never stop. vbox-img is using 100% cpu time, and no .img in VirtualDisk directory is created.
Workaround:
Avoid whitespace in .vmdk filenames and reference them correctly in .ovf.
This is OVM 3.0.3 with latest patches.

913518 wrote:
5. webgui shows progress but the process will never stop. vbox-img is using 100% cpu time, and no .img in VirtualDisk directory is created.Please open an SR for this so that a bug can be logged.

Create Template with Tabs

Similar Messages

Maybe you are looking for