Create time slicing for transformation between two InfoSources

Hi All,
i would like to create a time slicing for transformation between two InfoSources in bw.
Could you please explain the scenario and steps?
Thanks.
Gilo

Hi Brendon,
The non- cumulative key figures are not mapped in the transformation. Only the 'Inflow' and 'Outflow' key figures for the non- cumulative key figure are mapped.
You can check the property for the non- *** KF in RSD1, where you would find the corresponding inflow and outflow kf. If both of these are mapped in the transformation, the non- *** kf would calculate the value in the report in which it is included as:
Non-*** KF value = Inflow value - Outflow value.
Hope this helps.
Regards,
Abhishek.

Similar Messages

How do I set Time Machine to alternate between two attached external drives (so that if one fails I will have a separate backup to use)?

Hi Everyone.
Thanks in advance for your help.
Right off the bat let me say I am using Mavericks 10.9.1 on a 2011 Macbook Pro and using all Lacie external hard drives.
I am trying to get Time Machine to alternate between two attached external hard drives, trying to be safe in case one of the backup drives itself fails.
I have both drives set in Time Machine.
From what I gather Time Machine should by default alternate between drives when backing up (I would assume it does one big initial backup on each then subsequent backups are just changes).
But this is not how it seems to be working and I cannot find a straight answer despite much Googling and Foruming
Unfortunately it seems to only be backing up to "External Hard Drive 1".
There have been 4 backups since I set it up, all on "External Hard Drive 1", even though "External Hard Drive 2" is also attached and set in Time Machine.
I manually clicked "Back Up Now" and it started to work on "External Hard Drive 2" (like I want it to) for a minute but it appears to have stopped and gone back to backing up to "External Hard Drive 1".
Am I missing something? Does Time Machine only move on to another disk when the first one runs out of space? Do I have to turn one off in order to force it to back up to the other drive (that would be less convenient of course)?
I am hoping that I am missing something and that it will just alternate between the two. Otherwise it is not the most comforting and thorough backup system as I had hoped when I purchased the additional external hard drive.
I have a 1TB drive and a 500gig partition on another drive, both dedicated to backups (my Macbook HD is 475gig). It will take awhile for each to fill up and who knows what could happen during that time. Having Time Machine alternate between hard drives would be a nice small bit of security if the worst happened.
I realize that there are tons of other options for backing up but I just want to use Time Machine if I can.
Again thank you for your help!

You cannot use Time Machine in that way. I'm not sure where you heard that Time Machine alternates between drives automatically. What you can do is create a mirrored RAID array for the backup. This automatically duplicates whatever is on one drive onto the other drive.
Both drives must be the same size, and prefereably, exactly the same make and model. RAIDs can be configured using OS X's Disk Utility.
RAID Basics
For basic definitions and discussion of what a RAID is and the different types of RAIDs see RAIDs. Additional discussions plus advantages and disadvantages of RAIDs and different RAID arrays see:
RAID Tutorial;
RAID Array and Server:
Hardware and Service Comparison.
Hardware or Software RAID?
RAID Hardware Vs RAID Software - What is your best option?
RAID is a method of combining multiple disk drives into a single entity in order to improve the overall performance and reliability of your system. The different options for combining the disks are referred to as RAID levels. There are several different levels of RAID available depending on the needs of your system. One of the options available to you is whether you should use a Hardware RAID solution or a Software RAID solution.
RAID Hardware is always a disk controller to which you can cable up the disk drives. RAID Software is a set of kernel modules coupled together with management utilities that implement RAID in Software and require no additional hardware.
Pros and cons
Software RAID is more flexible than Hardware RAID. Software RAID is also considerably less expensive. On the other hand, a Software RAID system requires more CPU cycles and power to run well than a comparable Hardware RAID System. Also, because Software RAID operates on a partition by partition basis where a number of individual disk partitions are grouped together as opposed to Hardware RAID systems which generally group together entire disk drives, Software RAID tends be slightly more complicated to run. This is because it has more available configurations and options. An added benefit to the slightly more expensive Hardware RAID solution is that many Hardware RAID systems incorporate features that are specialized for optimizing the performance of your system.
For more detailed information on the differences between Software RAID and Hardware RAID you may want to read: Hardware RAID vs. Software RAID: Which Implementation is Best for my Application?

When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

Not able to do transformation between two schemas

I have this two very similar schemas, I tried to do a transform activity between them. I kept getting error says 'Failed to save XSL Map, Make sure XSL Map is valid'. I am not even able to map a single element.
This two schemas are generated from 'Define Native Format schema' using the same sample file. most of elements have same name and type in both files.
Here is how they look like:
Schema one:
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
targetNamespace="http://TargetNamespace.com/FRead"
xmlns:tns="http://TargetNamespace.com/FRead"
elementFormDefault="qualified"
attributeFormDefault="unqualified" nxsd:encoding="ASCII" nxsd:stream="chars" nxsd:version="NXSD">
<xsd:element name="Root-Element">
<xsd:complexType>
<xsd:choice minOccurs="1" maxOccurs="unbounded" nxsd:choiceCondition="terminated" nxsd:terminatedBy=",">
<xsd:element name="RECORD1" nxsd:conditionValue="RH">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="ReqHeaderId" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""">
</xsd:element>
<xsd:element name="LastUpdateDate" type="xsd:date" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy="""
minOccurs="1">
</xsd:element>
<xsd:element name="Description" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""">
</xsd:element>
<xsd:element name="Note" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:quotedBy=""">
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="RECORD2" nxsd:conditionValue="RL">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="LineId" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""">
</xsd:element>
<xsd:element name="ReqHeaderIdToLine" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""">
</xsd:element>
<xsd:element name="LineDescription" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""">
</xsd:element>
<xsd:element name="LineNote" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""">
</xsd:element>
<xsd:element name="Quantity" type="xsd:int" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""">
</xsd:element>
<xsd:element name="ExtendedAmount" type="xsd:decimal" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""">
</xsd:element>
<xsd:element name="TotalAmount" type="xsd:decimal" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:quotedBy=""">
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:choice>
</xsd:complexType>
</xsd:element>
</xsd:schema>
Schema 2:
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
targetNamespace="http://TargetNamespace.com/Fwrite"
xmlns:tns="http://TargetNamespace.com/Fwrite"
elementFormDefault="qualified"
attributeFormDefault="unqualified" nxsd:encoding="ASCII" nxsd:stream="chars" nxsd:version="NXSD">
<xsd:element name="Root-Element">
<xsd:complexType>
<xsd:choice minOccurs="1" maxOccurs="unbounded" nxsd:choiceCondition="terminated" nxsd:terminatedBy=",">
<xsd:element name="RECORD1" nxsd:conditionValue="RH">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="ReqHeaderId" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""">
</xsd:element>
<xsd:element name="LastUpdateDate" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""">
</xsd:element>
<xsd:element name="Description" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""">
</xsd:element>
<xsd:element name="Note" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:quotedBy=""">
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="RECORD2" nxsd:conditionValue="RL">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="LineNumber" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""">
</xsd:element>
<xsd:element name="ReqHeaderIdtoLine" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""">
</xsd:element>
<xsd:element name="LineDescription" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""">
</xsd:element>
<xsd:element name="LineNote" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""">
</xsd:element>
<xsd:element name="Quantity" type="xsd:int" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""">
</xsd:element>
<xsd:element name="ExtendedAmount" type="xsd:decimal" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""">
</xsd:element>
<xsd:element name="TotalAmount" type="xsd:decimal" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:quotedBy=""">
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:choice>
</xsd:complexType>
</xsd:element>
</xsd:schema>

Coul not reprocduce it:
- created BPEL process.
- imported the two XSD schema's
- Ceated two variables and each pointed to an element in the schema.
- Create transformation:
<?xml version="1.0" encoding="UTF-8" ?>
<?oracle-xsl-mapper

<mapSources>
<source type="XSD">
<schema location="x1.xsd"/>
<rootElement name="Root-Element" namespace="http://TargetNamespace.com/FRead"/>
</source>
</mapSources>
<mapTargets>
<target type="XSD">
<schema location="xs2.xsd"/>
<rootElement name="Root-Element" namespace="http://TargetNamespace.com/Fwrite"/>
</target>
</mapTargets>

?>
<xsl:stylesheet version="1.0" xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap" xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20" xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ora="http://schemas.oracle.com/xpath/extension" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:orcl="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc" xmlns:ns0="http://TargetNamespace.com/FRead" xmlns:tns="http://TargetNamespace.com/Fwrite" xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd" exclude-result-prefixes="xsl xsd ns0 nxsd tns ldap xp20 bpws ora orcl">
<xsl:template match="/">
<tns:Root-Element>
<tns:RECORD1>
<tns:ReqHeaderId>
<xsl:value-of select="/ns0:Root-Element/ns0:RECORD1/ns0:ReqHeaderId"/>
</tns:ReqHeaderId>
<tns:LastUpdateDate>
<xsl:value-of select="/ns0:Root-Element/ns0:RECORD1/ns0:LastUpdateDate"/>
</tns:LastUpdateDate>
<tns:Description>
<xsl:value-of select="/ns0:Root-Element/ns0:RECORD1/ns0:Description"/>
</tns:Description>
<tns:Note>
<xsl:value-of select="/ns0:Root-Element/ns0:RECORD1/ns0:Note"/>
</tns:Note>
</tns:RECORD1>
<tns:RECORD2>
<tns:LineNumber>
<xsl:value-of select="/ns0:Root-Element/ns0:RECORD2/ns0:LineId"/>
</tns:LineNumber>
<tns:ReqHeaderIdtoLine>
<xsl:value-of select="/ns0:Root-Element/ns0:RECORD2/ns0:ReqHeaderIdToLine"/>
</tns:ReqHeaderIdtoLine>
<tns:LineDescription>
<xsl:value-of select="/ns0:Root-Element/ns0:RECORD2/ns0:LineDescription"/>
</tns:LineDescription>
<tns:LineNote>
<xsl:value-of select="/ns0:Root-Element/ns0:RECORD2/ns0:LineNote"/>
</tns:LineNote>
<tns:Quantity>
<xsl:value-of select="/ns0:Root-Element/ns0:RECORD2/ns0:Quantity"/>
</tns:Quantity>
<tns:ExtendedAmount>
<xsl:value-of select="/ns0:Root-Element/ns0:RECORD2/ns0:ExtendedAmount"/>
</tns:ExtendedAmount>
<tns:TotalAmount>
<xsl:value-of select="/ns0:Root-Element/ns0:RECORD2/ns0:TotalAmount"/>
</tns:TotalAmount>
</tns:RECORD2>
</tns:Root-Element>
</xsl:template>
</xsl:stylesheet>

Use of "findByMultipleParameters" for "OR " between two Query Filters

Hi,
I am also working in CE7.1 .I have a query regarding the use of "findByMultipleParameters" .
That is how to use "OR " between two Query Filter condition,because if we add multiple queries into Query Filter List it will by default taking "AND " .
For an example, I have to pull data from a table/BO with a condition col A = 10 OR ( col B > 100 AND col c = "XYZ") .
My code snippet looks like given below.......
List queryFilters = new ArrayList();
QueryFilter queryFilterOne = QueryFilterFactory.createFilter("ROLLUMBER",Condition.EQ, rollNumber);
QueryFilter queryFilterTwo = QueryFilterFactory.createFilter("NAME",Condition.EQ, "123");
queryFilters.add(queryFilterOne);
queryFilters.add(queryFilterTwo);
List students = studentServiceLocal.findByMultipleParameters(queryFilters, false, "xyz");
I have tried all these and found all of them deprecated,Please suggest something appropriate.Your quick response will help a lot.
//queryFilterOne.setAction(QueryFilter.OPERATION_OR);
//QueryFilterFactory.createBoolOperator(queryFilterOne.OPERATION_OR);
//queryFilters.add(QueryFilter.OR);
//queryFilters.add(queryFilterOne.setOperation(QueryFilter.OPERATION_OR));
My another Query is what is the role of implCheck(Boolean),findByName(String) in "findByMultipleParameters()" ?
Thanking you for your help in advance.
Regards,
Sonali
Edited by: Sonali Das on Sep 14, 2010 2:32 PM

Hi Praveen/Harris,
As Mr Bhanu said , we can get the result by using formula variable defined on attribute with replacement path as processing type.
There is document in https://websmp101.sap-ag.de/bi
in infoindex->How to Calculate with attributes
To findout the difference between formula variable and current date, define one more formula variable with processing as custoemr exit.And fill this variable with sy-datum or something else.
with rgds,
Anil Kumar Sharma .P

SSRS expression for difference between two currency values

Hi All;
I need to get the difference between two currency values
Below is my report
I need to get differene between Actual Income and Profile Income and this value should be in "£" In this example it should be £0.00
Any help much appreciated
Thanks
Pradnya07

=sum(Fields!ProfileIncome.Value - Fields!ActualIncome.Value)
This could have either field first, but depends on which field is expected to be larger. You would then format the textbox to show in pounds.
HTH

Creating a Host file record between two trusted domains?

In each domain DNS, create a conditional forwarder for the other domain DNS server. That will resolve the issue. Keeping track of host files is an easy thing to forget and drop off the radar.

I've got two domains that end users RDP between. Recently, we ran into a problem with a .bat file that was used to create and map a shared drive (for scanned images) failing. I speaking with the software vendor who created the .bat file, they suggested that I make an entry in the Host file for the specific end user who is having this problem since the issue seems to be DNS related (can not resolve the computer name to the IP address from the server that is being RDP's into). When I attempt to create the A record, it tags the home domain onto the end of the FQDN.Like this,Name: end-user-pc.domain.orgFQDN: end-user-pc.domain.org.hostdomain.comIP address: 10.0.3.3Where the domain that the end user's desktop resides is domain.org and the domina that the server being remote'd into is hostdomain.com.The hostdomain.com server is 08R2 and the...
This topic first appeared in the Spiceworks Community

Recommendations for switching between two machines and one monitor

Hi,
I have a MacMini and a MacBook Air, both with Thunderbolt Display ports but I have one monitor. I'd like to switch between the two without having to unplug and plug the monitor back in every time. Any recommendations for some sort of switch or Thunderbolt hub would be greatly appreciated.
Best,
Chris

This should work if the display use display port/mini displayport inputs. A mini display port connectors plugs into the Mac's Thunderbolt port for video
http://www.kanexlive.com/snapx

Howto deploy a temporary exchange 2013 server for migration between two Office 365 accounts?

Objective:
We plan to migrate our office 365 from our current tennant (E3) to a new tennant (M) to drastically cut our annual costs for the same services, while retaining the mail and group memberships of all our users. This will involve installing an exchange server
to download and upload mail from the old tennant to the new tennant.
Background:
We are a longtime O365 customer, and have been a customer since before the "Midsize business" plans existed. There is no "cookie cutter" migration path from E3 to M. Microsoft currently recommends deploying an MS exchange server and off-boarding
the mailboxes from your E3 subscription and then On-boarding them to a new account under the M plan. As ridiculous as this is, this is indeed the path our company has decided to go. It isn't cool/fair that we're being shackled to the E plans (that are
vastly more expensive) when we're a small/midsize business that has been a longtime customer of O365, while new customers of equal size to us can expect to save over $4000 annually. The services (when compared) offered are nearly identical.
After calling MS support several times for guidance for this issue, I am advised that we should contact a 'partner' and ask for their support in doing this migration. We did as requested and were provided a quote to the tune of approximately $15,000 to do this
migration for us. Obviously this is unacceptable, and thus our business has decided to rely on my abilities to get it done. Again, involving an MS partner is not an option.
Environment:
1 MS AD domain:
- Original FQDN was @contoso.ca of this domain and UPNs were [email protected]
- UPN has been changed to [email protected] to allow for ADFS
- ADFS has been deployed and SSO works for all users with UPN [email protected]
- An "On-Prem exchange server" does not yet exist
1 O365 Account where main tennant FQDN is @corp.com
- There are 5 registered domains
-contoso.ca
-corp.com
- contoso.legacy.ca
-deprecated/will be deleted
-deprecated/will be deleted
- There are 40 E3 licenses, all using a @corp.com UPN
- There are 5 E1 licenses (we acknowledge that these will be upgraded to an M following the migration) that use the UPN contoso.legacy.ca
- No accounts currently use contoso.ca for email
- O365 was upgraded to 'the latest version' sometime in summer 2013.
Migration Plan (High Level):
Setup a local windows server (trial license)
Deploy an exchange 2013 server (trial license) on the aforementioned windows server http://technet.microsoft.com/en-us/evalcenter/hh973395.aspx
  Prepare and deploy Dirsync Deployment
of Dirsync
Add exchange to office 365 and begin replicating the mailboxes from the cloud to the exchange server. Wait for synchronization to complete.
More information: http://technet.microsoft.com/en-us/library/hh534377(v=exchg.150).aspx
http://help.outlook.com/en-us/140/ff633682.aspx
Evaluate total time it took to sync data.
Time it takes to download data to exchange should be relatively similar to time it takes to restore mail to the new service.
Open a new office365 account under the M plan.
  Plan a 1 hour mail & contoso.ca domain login outage
temporarily change all user UPN's to match the new tennant
perform a dirsync to the new tennant
disable dirsync after all accounts have been auto-created/provisioned
re-establish UPN + mail access.
Plan a date and time for the cut over.
remove the exchange hybrid server from the old tennant.
Point MX records directly to the exchange server.
Cut office 365 service.
  After the 30 minutes ~ 1 hour 'mandatory' wait time imposed by MS to 'register' the domain with O365, add @corp.com to
the new tennant
fix all user UPN's in the cloud to match their real UPN's.
This can be done with powershell.
attach exchange hybrid server to new tennant
Point MX records to the new tennant
Migrate all data from the local exchange server to the cloud under the new plan.
Current progress (Lab):
I have created a sandbox (Lab with no internet access or connectivity to production) environment in VMware and cloned the following servers to it:
1x Domain Controller (DC) running windows server 2012 (named DC02)
1x DC running windows server 2008 R2 (named DC01)
1x windows server 2012 R2 - prepped with all the pre-requisites to install exchange 2013. (named EXC01)
Where I am stuck / Problem:
I have installed exchange on the server EXC01 in the lab environment using my account. I am a domain administrator in the contoso.ca domain, but my UPN is [email protected].
After the installation of exchange, I notice that my email address in Active Directory changed from @corp.com to @contoso.ca. By default, I do not see @corp.com to be an available email address to select as my email address, and changing it in AD does not resolve
the problem.
In the exchange portal, I found "Mail flow ---> Accepted Domains", and believe I should add @corp.com to the accepted domain list. Questions:
1) Must I add corp.com and the other domains that exist in office 365 to the local exchange before I go through with the hybrid wizard?
2) If I must add them to exchange, I am provided with three choices:
- Authoritative Domain
- Internal Relay Domain
- External Relay Domain
Given that the domain is currently in office365 and is authoritative there, which of these applies?
3) Most documentation I have found has been about a one way migration from on-prem to the cloud. I have had a hard time finding a step by step guide for cloud to local (new server) and then back to cloud. Does anyone here have any good documentation for this
process? Would love it if it took into consideration multiple UPN/email addresses.

Hi,
Here are my answers you can refer to:
1. Yes, we should select the primary SMTP domain for our organization and any other accepted domains that will be used in the hybrid deployment:
http://technet.microsoft.com/en-us/library/jj200787(v=exchg.150).aspx
2. It depends on the usage of the specific accepted domain. And Exchange version has no influence.
To determine it, you can firstly check the function of the three types in the following article:
http://technet.microsoft.com/en-us/library/bb124423(v=exchg.150).aspx
3. Here are some reference about the migration from on-premise Exchange server to Office 365:
http://www.msexchange.org/articles-tutorials/office-365/exchange-online/configuring-exchange-2013-hybrid-deployment-migrating-office-365-exchange-online-part1.html
Additionally, since the issue is related to Exchange online, I recommend you ask for help on our Exchange online forum to get more professional help:
http://social.technet.microsoft.com/Forums/msonline/en-US/home?forum=onlineservicesexchange
If you have any question, please feel free to let me know.
thanks,
Angela Shi
TechNet Community Support

Creating Common Bom for more than two Organizations

Hi All,
I have a requirement of creating a Common BOM (bill of materials and few components to some organizations at a time) for more than one Organization.
How can i do this.
Can any one help me on this.
Thank you,
Amar

Amar,
Create org hierarchy and use hierarchy when running common bill program rather than org by org.
Thanks
Nagamohan

GetPosition for in between two markers

I hope someone can help me with a bit of code that I can't figure out - I don't even know if it's possible. The following code works fine:
if (sym.getPosition() > 4000) {
    sym.getSymbol("symbol1").playReverse();
sym.stop("symb1");
else {
sym.stop("symb1");
What I know need to add to the code is tell it to execute those actions only when the position is between 4000 and 5000, not when it is just above 4000. Symbol1 should play if the position is between 4000 and 5000 and symbol2 when the position is above 5000. Basically, a click on this element should decide: if below 4000 do this, between 4000 and 5000 do this and above 5000 do this. A normal if - else probally doesn't suffice as my problem has three instances and not two. I have no idea how to code this though.
To clarify what I want to do with this: the current code checks if a box is open (the symbol1 box is in the timeline after 4000) and either closes the box or not (because it's already closed). Now I need two boxes in the same setup. The code should check if a box is open (only one box can be open at the same time) and then closes whichever of the two boxes is open.

I am answering my own post - I found my solution. The following works fine:
if ((sym.getPosition()> 4000)&&(sym.getPosition() < 5000)) {
    sym.getSymbol("symbol1").playReverse();
sym.stop("symb1");
if ((sym.getPosition()> 5000)&&(sym.getPosition() < 6000)){
    sym.getSymbol("Symbol2").playReverse();
sym.stop("symb2");
else {
sym.stop("symb1");
I had forgotten to add && - with just one & it didn't work.

Wait for while between two functions execution

Hi, Pro,
I am now using jdk1.2 to develop GUI using Swing. I need help from you to figure out how do you make program waiting for while(like sleep) between function A and function B, and still not block the screen allow user to do other thing on the screen.
like:
private void Function(){
functionA();
//wait for 30 seconds here but
functionB();
Thank you very much!!
ywang

I did put it on, but I got message as:
java.lang.InterruptedException: operation interrupted
at java.lang.Thread.sleep(Native Method)Then you're probably trying to sleep the dispatcher thread. Sleep should never be called in event handler processing. A GUI event which triggers a process taking a substantial ammount of time, like this one, should always spawn a new thread to do it and, itself, return promptly.

How to get the time difference (in seconds) between two timestamp fields?

Hi All,
I'm exploring validation expressions in SAP MDM Data Manager version 7.1.07.245
I have two timestamp fields, suppose Update Date and Update-GDS.
What I'm trying to do is prompt a warning when:
(Update Date minus Update-GDS) is greater than or equal to zero seconds
AND
(Update Date minus Update-GDS) is less than or equal to 900 seconds
the bottomline is, Update Date must be equal or greater than to Update-GDS but Update Date must not exceed 900 seconds difference.
my initial try was:
(Update Date - Update-GDS)>=0 s AND (Update Date - Update-GDS)<=900 s
But it always returns true even the time difference between update date and update-gds is beyond the condition.
Can you please guide me through this?
Thank you very much in advance.
Regards,
~erwin

Hi Abhishek,
I tried your code but it always returns true.
It seems subtraction of timestamp fields do not actually get the time difference... (in seconds)
Is this possible anyway? Or is there any other better approach on this?
Thanks,
~erwin
Edited by: erwin.j.rivera on Dec 14, 2011 8:40 AM

How to create one-to-one relatinship between two tables

Hi,
I know how to join two tables on basis of one-to-many relationship.
one should be primary and the other should be a reference key.
then in er diagram we get one to many relationship.
How we can get this relationship in case of one-to-one when we want to relate two tables where both are primary keys.
how can we get a one to one relatinship in Toad ER diagram. as i did by adding a primary key in both tables but i cant get them in toad.
Does anybody can help.
Thanks

How we can get this relationship in case of one-to-one when we want to relate two tables where both are primary keys.[url http://forums.oracle.com/forums/thread.jspa?messageID=1566621#1565326]SQL for cross dependent table creation

I have a ASCII input feeding a value in. Each time this value falls between two numbers I want to increase the count by 1. How can I do this?

I have been trying to work this out an I am sure is is not too difficult to do, but I cant seem to get anywhere with it. If anyone could help that would be great.
Thanks
RossH

I am not currently at a PC with LabVIEW on, so Ic ant send you an example of how to do this. Instead you'll have to understand my description....
I'll assume that you want to constantly monitor the input value...
Use a while loop with a shift register to store the count value. You can initialise the count value to zero (or whatever you like) by wiring a numeric constant to it - to the left of the shift register - outside the loop. Place a case structure inside the loop and wire the shift register left to right through the false case. In the true case place the increment function and connect it between the input and output nodes you now have on the case structure. On each iteration of the loop the count value will either remain the same or be incremented b
y one depending on whats wired to the boolean input on the case structure. Now you need to detect whether your ascii value is in range. You can use the 'In range and coerce' function for this (found in the comparison function pallette). Wire the range values and the input value to it and take the boolean output to the input of the case structure. The ascii value must be acquired within the loop, so that you are checking the updated value on each iteration (or if it comes via an array you could wire the array directly to the outside of the loop and enable indexing - in this case it would be best to use a for loop). You can place an indicator on the 'count' wire to monitor its value if you wish. Remember to also place some conditional statement to stop the loop when required and also a wait function should exist inside the loop. When the loop stops, the count value will be available at the output of the shift register.
Hope this helps and is clear enough for you to implement?!

Create time slicing for transformation between two InfoSources

Similar Messages

Maybe you are looking for