Created  A view in standard Component.

Hi All,
       I have created few view and view set In a standard component As per my requirement . This view and view set is created successfully .
But when I want to add the view or view set In Runtime Resportiory it is not visible.
For E.g. I want to add the view in Overview page but the view is not showing.
Some where We have to append.
Any pointer can help me.
Thanks in Advance
Thanks & Regards
Rasmi Ranjan Pradhan

Hi Rasmi,
Are you searching the view in the enhanced component itself?. Usually people do a mistake that they give the standard component name and the view won't be visible. While giving the component name, give with Z.
Thanks,
Faisal

Similar Messages

  • Create interface method in standard component.

    Hi Experts,i want to enhance standard component.in that i created one attribute and i used in my component.For that attribute the value is passing from some other component.i try to create interface method in standard component.but it is not possible.so please help me out this issue.
    Regards
    prasad

    Hi,
    No, You cannot create Interface Methods/Nodes in Standard Component by Enhancing. I would suggest to create a Singleton class and create your method in that class and can access across components.
    Regards,
    Kiran

  • TP CONFIGURATION PROBLEM ( While creating a View Controller in Component )

    Hi All,
         I have a problem in TP Config while creating a View Controller in a component i am getting this Exception 
        Parameter lsm(&1) not in version 0004(&2) of tp configuration .
        This Exception Raised from this Function Module : RS_ACCESS_PERMISSION
    Any on can please help me to come out of this issue.
    Regards And Thank you,
    Nirmala.K

    Sounds like you should be using one of the Apps forums, perhaps {forum:id=210}

  • Best Practice : Creating Custom Renderer for Standard Component

    I've been reading the docs and a few threads about Custom Renderers. The best practice seems to be to create a Custom Component where you need a Custom Renderer. Is this the case?
    See [this post|http://forums.sun.com/thread.jspa?forumID=427&threadID=520422]
    I've created several Custom Renderers to override the HTML provided by the Standard Components, however I can't see the benefit in also creating a Custom Component when the behaviour of the standard component is just fine.
    Thanks,
    Damian.

    It all depends on what you are trying to accomplish. Generally speaking if all you need is for the user interface output to be changed then a renderer will work just fine. A new component is usually made in order to provide some fundamental change in server side functionality not related to the user interface. - Ponderator

  • Creating 'Z' views for Standard ABAP Web dynpro Application

    Hi Experts,
    I am totaly new to ABAP web dynpro objects.
    In our project there were some client requirements which required us to change the properties of the Views related to the Webdynpro. The Client now has said that he needs to apply some  enhancement pathces on his system. Due to this, the changes made to the Views i.e all the changes done in standard code are  lost.
    The client now wants a long term solution where all the changes need to be done in 'Z' implimentataion so that changes are not lost every time the pathces are applied.
    Is it possible to create an entire new 'Z' Views for the standard Webdynpro instead of standrad ones?
    If Yes how does one link them to the Webdynpro application ?

    Hi
    Have a look at following article about enhancing webdynpro applications.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/700317da-bd79-2c10-368e-8f18bf5d8b81?quicklink=index&overridelayout=true
    Regards
    Manas Dua

  • Change View for standard component

    Hi all.
    I am working on ICwebclient 2007. using standard icwebclient. The 'Account Identification' search component ICCMP_BP_SEARCH automatically displays view ICCMP_BP_SEARCH/BuPaSearchB2B but for my requirement i need to use search view ICCMP_BP_SEARCH/BuPaMixSearchB2B . Where to change, configure or how to change this view. please reply with answers.

    Hi,
    In your account identification profile in spro, can you just change the value of parameter -Scenario= Mix,instead of B2B and check?
    Thanks and Regards.
    Rohit

  • System Error in creating a view.

    Hello Friends,
    I am getting the following error, when I create a view in a component.
    Service cannot be reached
    What has happened?
    URL http://sapdev01:8001/sap/bc/wdvd call was terminated because the corresponding service is not available.
    Note
    The termination occurred in system DEV with error code 403 and for the reason Forbidden.
    The selected virtual host was 0 .
    What can I do?
    Please select a valid URL.
    If you do not yet have a user ID, contact your system administrator.
    ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:sapdev01_DEV_01-v:0-s:403-r:Forbidden
    HTTP 403 - Forbidden
    Your SAP Internet Communication Framework Team
    Thank you for your time.
    Cheers,
    Sam

    Sam,
    This is because the HTTP Service for the parcitular service you are trying to use is not actived.
    1. Go to Transaction SICF
    2. Click Execute
    Then you need to navigate to the correct service... based on the error url that you provided http://sapdev01:8001/sap/bc/wdvd, you would
    3. Navigate to default_host/sap/bc/wdvd. Highlight wdvd then go to Service/Host --> Activate (Shift + F11)
    4. Try again!
    Best.
    Ryan

  • Mapping between view controller and component controller

    Hi Experts,
    I am new to web dynpro ABAP. First I created an application using one input field and one button, my view name is V1. In view context, I created one node viz. NODE1 using table SFLIGHT, fields chosen are CARRID CONNID and FLDATE. I have bind that to my input field and for button I have not done any thing. So, when I am running this application it is allowing me to select value for my input field. After this, I have added a table to the view layout. I have added to nodes using sflight table in COMPONENT CONTROLLER. First node is SFLIGHT with CARRID, CONNID, FLDATE, PRICE and PLANETYPE and second node is NODE1(same name) with only CARRID. Now in VIEW CONTEXT it is showing -
    CONTEXT
       NODE1
         CARRID
         CONNID
         FLDATE
    (which I had created in VIEW CONTEXT for input field)
    CONTEXT COMPONENT CONTROLLER
       SFLIGHT
         CARRID
         CONNID
         FLDATE
         PRICE
         PLANETYPE
       NODE1
         CARRID
    (which I had created in component controller after adding table)
    Now both this context should be matched as per my knowledge, so that when I bind the table it should V1.SFLIGHT.<fieldname> and not as V1.NODE1.<fieldname>
    But I don't know how to match them. Please help.

    Hi Sambaran,
    I guess I understood what you want.
    To achieve this, proceed as follows:
    1)Open your View, goto Properties tab. Here in the Used controller table, click on the create icon to include the component controller (component controller is added by default by the framework, if you use custom controller you need to define this usage).
    2)Once you do this, goto Context tab of the view, here now you will be able to see the component controller on the right hand side.
    3)Next, drag the SFLIGHT node from the component controller, and drop it on the Context (root context) of the view (left side). Doing this system will create a mapped context node on the view which you will use to bind to the view elements on the layout.
    The above steps apply if you want to directly create a view context from component controller context.
    Hope this helps!
    Thanks,
    Chitrali

  • How to create navigational links...and connect views of another component

    Hi...
    I am new to SAP CRM...
    I have a requirement where i need to navigate from the main window of a component to the view of a different component.
    Scenario:
    When i click on edit button after selecting a line item in the assignment block in the BT111H_OPPT/Details ,it should navigate to the details page of the line item which is the view of another component that has been created .say ZRP/PEL.
    How can i achieve this using the concept of inbound/outbound plugs and navigational links?
    I have got a vague idea on plugs from my search...that these are entry/exit points to views.
    But what is the procedure to follow to attain the functionality?
    How do we decide on which component needs which all plugs?
    Anyhelpful pointers would be rewarded.
    Also, an idea on what exactly does the inbound/outbound plugs do and how is the flow happening , how are navigational links working etc would be appreciated.
    Thanks..

    Steps to create navigational link:
    1.     Create an outbound plug in the component from where you want to navigate. Sometimes      
                    standard navigational links are already there.. you just need to identify it.
    2.     Create a Component usage in runtime repository for target component.
    3.     Add this component usage to the main window view in repository. 
    4.     Create navigation link between the transaction type and the target component view.
    5.     In the outbound plug, use the view manager to navigate to the target component. Ex: 
                    ME->FIRE_OUTBOUND_PLUG( IV_OUTBOUND_PLUG   = 'TO_OUTPLUG''
                              IV_DATA_COLLECTION = LR_COL ).
    6.     Pass the data through the data collection.

  • Create a new view under a component in IC Webclient UI

    Hi ,
    Can anyone tell how to create a new view under a component in IC Webclient UI.
    Regards,
    Sijo

    Depends what kind of view you are talking about. In any case first go to runtime repository on the left panel of the component and then click the edit button.
    If you are talking about interface view, right click the component interface and choose "Add interface view". The created view is added to the selected window in the runtime repository.
    If you want to add view to the window right click the windows component and select "Add view". 
    Select the view using the f4 help and save the runtime repository.

  • How to refer standard component to create customize component?

    Dear experts,
    Can any one guide me how to refer a standard component to understand the flow of the event of with in the views and there are various methods are present to change properties of a field property. How can we refer the standard code for changing our field property?
    with regards
    crmfresher.

    Hi,
        The CRM 2007 Webclient cookbook is available if you have a marketplace ID.
    Refer to this thread.
    [CRM 2007 WebClient Cookcook available!;
    Regards,
    Arun Prakash

  • Can we create a view involving a standard table and a ZTable ?

    Hi,
    I created a view based on 2 tables : EKKO and a Ztable having EBELN field in common.
    Now, when i try to create a PO in ME21N , this view should get updated.But,It doesn't happen so.
    So i want to confirm that is it not possible to create a view on a Ztable...
    Also can anyone suggest any other option to do so...

    Hi,
       Yes you can create a view using a standard view using a standard Data base table and a custom data base table. But this getting updated would not be done by the standard program of Tcode ME21N, I reckon you need to write the logic of updation in an enhancement.
    Regards,
    Murthy.

  • Creating Classification view for material through Standard Function

    hi,
    I have created the material code through BAPI_MATERIAL_SAVEDATA. For quality inspection i have used BAPI_MATINSPCTRL_SAVEREPLICA. i have to create classification view for that material code. Can anyone suggest me which standard function helps me to create the classification view.
    Thanks in advance.
    Senjey

    hi,
    i have tried that function module. I have mentioned the code below.
    i_object = '000000151860630000'.
    i_alloc_num-CHARACT = 'THICKNESS'.
    i_alloc_num-VALUE_FROM = '5.70'.
    append i_alloc_num.
    i_alloc_char-charact = 'SHAPES'.
    i_alloc_char-VALUE_CHAR = 'PLATE'.
    append i_alloc_char.
    clear  i_alloc_char.
    i_alloc_char-charact = 'CATEGORY'.
    i_alloc_char-VALUE_CHAR = 'CS'.
    append i_alloc_char.
    clear  i_alloc_char.
    CALL FUNCTION 'BAPI_OBJCL_CREATE'
      EXPORTING
        OBJECTKEYNEW            = i_object
        OBJECTTABLENEW          = 'MARA'
        CLASSNUMNEW             = 'RAWMATERIAL'
        CLASSTYPENEW            = '001'
      STATUS                  = '1'
      STANDARDCLASS           =
      CHANGENUMBER            =
      KEYDATE                 = SY-DATUM
      NO_DEFAULT_VALUES       = ' '
    IMPORTING
      CLASSIF_STATUS          =
      TABLES
        ALLOCVALUESNUM          = i_alloc_num
        ALLOCVALUESCHAR         = i_alloc_char
        RETURN                  = i_ret.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      EXPORTING
        WAIT = 'X'.
    But i am getting the error 'Assignment exists and is valid '.
    Please help.
    Regards,
    Sengathir.J

  • How to submit standard component view

    Dear:
        I have write a report with webdynrpo table to lsit bp data.
       But user want to display standard bp data view (use standard bp conmpnent) when he review this report.
      example: I list bp data in webdynpro view. Usr click one item, the view must navate to standard bp view. This bp view is stanard conpoment with web.
      I use  crm7.0.

    Hi,
    Please check this, it might helps
    How to call a Particular View from a View of Current Component
    http://wiki.sdn.sap.com/wiki/display/WDABAP/Callinganinterfaceviewofanotherabapwebdynpro+application
    http://wiki.sdn.sap.com/wiki/display/WDABAP/WebdynproApplicationsIntegration
    Cheers,
    Kris.

  • To fetch data from a standard component through Component Controller

    Hi,
    I have a requirement in which i have to access and display a standard view of a standard component in a Custom Component.
    I am able to display or configure that view on Custom Component by using Component Usage and Component Interface. But unable to populate the data in that view. Although i have exposed a context node in the standard component and created the same context node in my custom component in the Component Controller and using its method WD_USAGE_INITIALIZE to bind them.Please, provide some pointers on it.
    Cheers,
    Sharad

    Hi Sharad,
               The data will show up only if you put them there. May be the standard component itself gets the data from some where else. Usually, these data are provided by the component controller. For example, the component controller contains the header entity and the used component has access to the header entity via binding and shows all item entries fetched via relations(usually this is done in on_new_focus method). If the binding is there, but no data ia available, it will stay empty.
             Check a standard main component which uses the standard component that you are using and look at how they are establishing the connections.( component/custom controller bindings, on_new_focus methods,,)
    Regards,
    Arun Prakash

Maybe you are looking for