CreateTextField and stop scrolling

I have an example of a thumbnail scroller that I've altered a
little. The problem I am having is with inserting two text fields
on the fly and stopping the scroller when the user mouses outside
the flash object.
First question:
How do I create two text fields, one on top of the other and
located under each thumbnail. In the example flash file I am trying
to include a text field for a description and tool name. How would
I create this? The text field needs to have the same mouse over
effect (see attached example).
Second question:
When I mouse down and the scroller starts scrolling. When I
want the scroller to stop I mouse up out of the hit area. But, when
I scroll off the object after I mouse over the hit area the scroll
keeps scrolling how would I stop this. I hope this makes sense. If
not just let me know. The code is attached below.
http://www.geocities.com/mike0916qb/scroller.zip
Thanks in advance.
mdawg

Any suggestions or examples. Your help is greatly
appreciated. Thanks in advance.
Mdawg

Similar Messages

My iPhone 5 won't stop scrolling through songs and I can't stop it please help !! :(

My iPhone 5 won't stop scrolling through songs and I can't stop it please help !! :(

settings - general - usuage - music - delete. Then do a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
Then sync the music back via iTunes.

How can I animate my sprite to run on scroll and stop when scrolling stops?

I appreciate everyones help so far.
I want my illustration of a man to "walk" through my composition as the user scrolls through it.
I have a sprite created and have made it loop. What sort of code do I need to write to get it to move only on scroll and stop off scroll?
Thank you guys so much!
Johnathan

Hi,
Thank you for your post.
Please check the following tutorials for scrolling effects in edge animate.
http://www.heathrowe.com/adobe-edge-animate-simple-scrollbar-symbols/
http://www.adobe.com/inspire/2014/01/parallax-edge-animate.html
Regards,
Devendra

Picture "slides" and keeps scrolling after I stop

When I use the touch pad and I scroll something on-line, the picture stops as it should.
After a couple of seconds the screen moves a bit as if I am scrolling some more, then moves again, then sometimes again!
What the...?
Any ideas?
Thanks,
Mike

More likely it is a hardware defect.
Have you restarted your phone?
If so, and the issue has persisted, backup your phone and restore it from a backup, then restore as new.
If neither of those resolves the issue, make an appointment at an Apple store near you and have a Genius examine it as it's most likely a hardware failure.
~Lyssa

How do I get my music to quit scrolling and stop and play a song?

How do I get my music to quit scrolling and stop and play a song?

Basically it means that the files are not on the location where iTunes is expecting to be.
What you can do is remove those songs from you playlist, then try to locate them on your harddisk again, and then in iTunes you can choose file > Add folder to Library... , specify the location where you found them and they will be added again.

My pages stopped scrolling with cursor keys after upgrading to 5.0, the cursor moves WITHIN html documents and "jumps" from frame to frame and character to character within the frame.

Recently, I noticed that google search pages stopped scrolling. There is an "right arrow" at the beginning of each link. When I press the cursor "up/down" arrow on the keyboard, the cursor jumps from link to link. Also, while on any html webpage, the cursor moves one character at a time (left / right arrow) and one line at a time (up/down arrow) until the end of that frame is reached, it then jumps to the next frame.

You may have switched on [http://kb.mozillazine.org/accessibility.browsewithcaret caret browsing].
You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
* Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
* http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
* http://kb.mozillazine.org/Accessibility_features_of_Firefox

Firefox stops scrolling and partially freezes

Hi,
When using Firefox on an Asus Transformer TF101 running Android 4.2 the browser will often stop scrolling up or down, and becomes mostly unresposive. You can still tap the address bar and cut/paste there, but you can't open any bookmark. Closing the browser temporarily solves the problem but it always comes back at some point.
This doesn't happen with other browsers including Chrome. This started happening maybe two or three updates ago.
Any ideas on how I can fix this?

Try Firefox Beta version
*https://play.google.com/store/apps/details?id=org.mozilla.firefox_beta

My mouse was scrolling 'normally' and has stopped scrolling down. Any suggestions?

My mouse was scrolling down 'normally' but has stopped scrolling down, forcing me to use the less convenient drag-down bar at the right hand side of the screen. It continues to scroll up. 'Settings' doesn't seem to offer a 'restore' scroll down. Any suggestions?

This
http://store.apple.com/us/product/MB112LL/B/apple-mouse?fnode=1c74cb6b5804af5dd2 c0d0c69b4368ad5cc935abc3ee6c01df3379247a…
shows that your mouse yo have a scroll button on the top surface
The link
http://km.support.apple.com/library/APPLE/APPLECARE_ALLGEOS/HT3226/HT326.mov
that
den.thed
provided shows how to clean that scroll button
Here is YouTube video too:
https://www.youtube.com/watch?v=3Su6JDxYqAM

I have an optical mouse that came with my Mac Pro plugged into the USB port on the keyboard. After a year of working normally, the trackball all of a sudden stopped scrolling down. It scrolls up just fine, but not down. Any thoughts?

I have an optical mouse that came with my Mac Pro, the only thing plugged into the USB port on the keyboard. After a year of working normally, the trackball all of a sudden stopped scrolling down. It scrolls up just fine, but not down. Any thoughts?

Well
I tried all of the suggestions, sort of. I did not have alcohol wipes, but I did take alcohol and pour some ona white paper towel and then rolled the mouse touch ball aroound and that finally cleared up the problem. Just inverting it on paper did not do the reick, it needed some help with the alcohol. Of course the probelm is the debris that gets inside and it really needs to come out.
This is a huge problem for RIM devices users too.

Audio volume and mouse scroll wheel-WMM inferior to 3rd party?

Whenever I can't use my Wireless Mighty Mouse (maybe I forgot it at home etc.) I try to use other mice lying around from bygone eras.
When I end up using a 3rd party bluetooth mouse, say a Kensington, or even a Microsoft, I notice that I can click on the Volume menulet on the menu bar at the top right of my OS screen, and with the volume bar expanded downwards I can then use the scroll wheel to adjust the volume.
When I use the Apple mouse and its scroll ball nothing happens. I have to actually click and drag the volume slider, a much more precision demanding exercise.
What gives? How come the mouse driver for a Kensington/Microsoft allows something the Apple's own seems to ignore? Is there some Terminal tweak I could do to enable this behavior on the WMM?
Many thanks, as always, people.

the mouse works fine doing all the other things. well, i dunno, how changing USB would make any difference. Though I did try that, with no effect.
i have a PS/2 mouse & keyboard connected with a PS/2-USB adapter.
And *sometimes the scroll wheel does work*, & then suddenly stops doing what its supposed to do!!??

Mouse scroll bar stopped scrolling

Hi,
My scroll bar has stopped scrolling. How do I get it to work again?
Thanks in advance.

Hi moreton, Welcome to Apple's Users Help Users Forums.
Do a forum search on clean MM or Mighty Mouse.
In essence dampen clothe with water or alcohol and press down wheel and scrub rather vigorously in all directions.

I have a macbook pro core i7 mid 2012 And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve t

I have a macbook pro core i7 mid 2012
And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve this problem and thank you

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Mouse won't stop scrolling player

Problem: Mouse won't stop scrolling player
Adobe Flash Player 9 (9.0.115.0)
I double click a SWF file.
It comes up in Adobe Flash Player 9.
I switch to another program.
I switch back to the Flash Player.
Just moving the mouse (without holding down the mouse) moves
the player scroll.
I cannot turn mouse scrolling off so scrolling stops.
Esc does not solve problem.
I appreciate your feedback.

tech78g:
I get what you're saying, but in the system preferences there are clearly options for
"Scroll direction: natural — Content tracks finger movement"
and for
"Swipe between pages — Scroll left or right with one finger"
both indicating that if unchecked, there should be no scrolling or swiping with any finger movement. Yet mine continues doing both, with both unchecked.
It's not just annoying. It's interfering with my work.

Safari stops scrolling pages

Since recently upgrading safari and of course the OS to Mountain LIon, I have discovered a quite serious bug.
Randomly safari stops scrolling pages. This has so far happened 3 times in the last week or so. You can open/close/view pages, but even though the scrollbar is present it won't scroll. I cannot use my mouse wheel, or click in the scrollbar or use the space bar, page down key or even search the web page to force it move down.
The site I visit doesn't initiate the issue, it can be any website. The issue appears to be quite random, the only way to fix the issues is to close the browser and start it again.
I have currently 2 extensions running in Safari, Ultimate statusbar and Awesome screen grab., I am going to proceed to remove both to test if this fixes the problem.
However this is very frustrating as this has never been a problem in other version of Safari to date. I had to complete this question in Google Chrome, as of course I couldn't scroll to tee bottom of the page in safari!

Try resetting and clearing the cache more often.
From your Safari menu bar click Safari > Reset Safari
Select: Clear History (also empties the cache)
Deselect the remaining boxes then click Reset.
If that didn't help, open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy / paste: ~/Library/Caches/com.apple.Safari
Click Go then move the Cache.db file from the com.apple.Safari folder to the Trash.
Quit and relaunch Safari to test.

Scrollable Text Won't Stop Scrolling!

Hey everyone,
I've created a button so that when you roll over it, text is loaded and scrolls up the page. However, it doesn't stop scrolling when the text runs out - it keeps going so all of the text goes off the screen!
Here's the code on my button:
// Arrow Button
on (rollOver) {
     _root.hover = 1;
on (rollOut) {
     _root.hover = 0;
and on my text (dynamic/multi-line):
onClipEvent (enterFrame) {
     if (_root.hover == 1) {
          with ("") {
               _y -= 5;
If anyone can help me out that'd be great. I'd like it to stop scrolling once it runs out of text.
Thanks!

Thank you very much for the example - I've written the code down in my book and have saved this. It works perfectly! I'm really thrilled. Your method seems 100 times easier than the tutorial I had been following. One thing I'm curious about is the code to actually make it move. I understand that the
about_mc._y -= 5;
is what's making it move, but is it the -= that's telling it to move upwards at a speed of 5?
(How I wish I could still use Director!! Unfortunately here it's not industry standard and no one accepts these files)
So everything is working great now except the text problem is still there. I had created a dynamic text box, changed the font/size/etc and then converted it to a movie clip. Should I have converted it to a graphic first and then a movie clip? I'm not sure why the font would appear fine in Flash, but then when I publish it turns to the default. (testing on the same machine)
Thank you again for your help - I appreciate it greatly!
PS: I tried converting to a graphic first, then movie clip, and same issue...

CreateTextField and stop scrolling

Similar Messages

Maybe you are looking for