CreateTextfield with dynamic height?

Is it possible to use createTextfield with a fixed width, but
without defining height, so that it will size according to the
amount of text loaded into it from XML? I would like to do this so
that I can get the _height property at runtime to use for custom
scrolling of the text field. Thank you in advance!

So, if I can't have dynamic height, (assuming no reply
probably means "no" ;) ) I decided I would at least make it so the
height can be defined from the XML file. I added an "h"= 300;
attiribute to the node that contains the text in the XML file.
Everything loads properly and traces just fine, but when I try to
create the text field, nothing is there. I must have some wrong
syntax or something,or perhaps I have to define a font differently.
My font is in the library and linkage is set for exporting for
actionscript. Could someone be so kind as to take a look and see if
anything is obviously wrong? Thanks!

Similar Messages

Report Formatting with Dynamic Height Header/Footer

I need to generate a printable report (pdf if possible) with a:
1) Header - Dynamic Height based on recordset output
2) Body - Recordset output, may carry over to multiple pages
3) Footer - Dynamic Height based on recordset out
In short, the whole page is dynamic- The header and footer need to be on every page and whatever height is left over to fit within the print area goes to the body and the line item output of each record (think invoice). Then the number of pages will depend on how long it takes to output the body recordset (but the header and footer MUST be on each page).
I have been trying to get this to work using cfdocument since CF7 and have never had any luck. It has not worked due to the reason that since the header and footer are dynamic height, I do not have any way to set the margins properly on page generation (so it shrinks the header or leaves excess whitespace).
Anyone recommend the best way to go about this? I have heard about the report builder and am not sure if that will fit these requirements. I appreciate any assistance!

When the footer goes to the 2nd page the page subform is incremented so you will have to reference the page subform as well. I suggest that you add a button (this is for a test only) to the footer subform and add the code app.alert(this.somExpression). Now render the form and make sure the footer stays on one page. Hit the button and take note of the someExpression. Now add enough rows to force the footer to a new page. Hit th ebutton again and take note of the changed somExpression. So to solve your problem you will have to find out which page your footer is on. and then construct your expression to incorporate this chane in expression. Note that the indexes are 0 based but the page numbering is 1 based.
Hope that helps
Paul

How to have a UILabel with dynamic height?

Hi, I have a UILabel which I created it programmatically. This UILabel consists of dynamic data and has line break. I tried setting this to my UILabel:
CGRect cuisineRect = CGRectMake(94, 66, 180, 50);
UILabel *cuisineStr = [[UILabel alloc] initWithFrame:cuisineRect];
cuisineStr.numberOfLines = 0;
cuisineStr.lineBreakMode = UILineBreakModeWordWrap;
If the UILabel text is higher than 50, it'll be cut off, without word wrap. Is it that I should set the init with position only, without the height and width?

Try implementing this method:
- (CGFloat)tableView:(UITableView*)tableView heightForRowAtIndexPath:(NSIndexPath*)indexPath;
You'll learn more if you figure out how to use it on your own or with google. If you come up empty, I'll show you some example code.
-Phil

Sliding panels with dynamic heights

Hello,
I'm currently working with sliding panels. When I resize my
panels, the panel indexing system in spry does not seem to conform.
Ie, if my panels are 100px high. As soon as I dynamically
change them to 50px, panel(1) is no longer the second panel but
rather the fourth.
It appears that spry retains heights of elements. Is there
something in SprySlidingPanels.js I can call for it to
'recalculate' the heights?
Thanks

I was wrong!
Spry is indeed clever and retains panel number.
Doh!

CS3/CS4 - Tree view with dynamic height/width

Hi,
I have a resizable panel that contains a treeview, when the panel is resized the treeview resizes but I would also like the treeview nodes to adjust their width. For the record, -my treeview nodes contain static text widgets and images.
Can I hook up some observers and manually resize the widgets when the panel resizes?
Kind regards Toke

If your node re-size needs are simple you may achieve it by setting e.g. kBindRight | kBindLeft on the appropriate widgets in the .fr file. For a complex view I'd extend PalettePanelView to create your own implementations of Resize (adapting the widget widths in there) and perhaps ConstrainDimensions.
Ian

Dynamic height in a table with scrollable content

Hello,
i have in a web dynpro a table. The table is scrollable. At present i have a fixed height. Is it possible that i have a dynamic height, so that the table for example has a height of 70 percents from the page.
I try that but it doesn't work. Have any one a solution or is it not the supported in web dynpro's?
best regards
Markus Jura

Markus,
There is no way to define height of table in percents of parent container. You may only manipulate number of visible rows. For example, bind corresponding IWDTable property to context attribute of type int and change value of this attribute dynamically (in wdDoInit and/or action handlers code)
Valery Silaev
EPAM Systems
http://www.NetWeaverTeam.com

Dynamic Height in Graphs does not work properly when the graph is in an list

Help please,
I have an report in SQL Server 2008 (SP1) Reporting Services which uses Dynamic Height to dynamically increase the size of the graph for the data. For a single dataset this works great!
When I place this graph in a list/tablix (to display this graph on each group) things go bad... Only the first graph on every page is resized, all other graphs on the same page are equal in size of the first!
When I place a pagebreak on the lists property all graphs are drawn fine!! But then I will have a page for every question in my data (which can be a lot!)
What is going on here? Please help.

Hi Jerry,
thanks for your reply, but this does not work. The graphs are now all the same size (the size of the first one that is), and on the same page for that matter...
It looks like the renderer calculates the value of the dynamic height only once on a page in stead of each graph. That's a bug in my opinion.
Any suggestions on how to fix this?
The inner workings of the report are like this: The data contains anwers from a survey by question, so i have a unknown count of answers with each question; I placed a list on my report with a groupingproperty on the question asked. On this list i place a horizontal bar-graph which must grow in height when it is too small. The dynamic height should be calculated like this =70 + (CountDistinct(AnswerValue.Value)*10) & "pt".
When i place this calculation in a textbox, every item in the group is calculated correctly. Each graph is drawn, but the graphs are sized only to the size of the first graph on the page. When I place a pagebreak after each list-repeat (so i get each question on a seperate page) each graph is drawn correctly! This results however in more than 100 pages with all used for just a few centimeters (think about trees!).
I'm using SQL 2008 / SSRS2008 with SP1 by the way ( without SP1, the behaviour is the same).
Any more suggestions are appreciated.
Danny

Build a web gallery with amazing flash slideshows with dynamic XML files

Build a web gallery with amazing flash slideshows with dynamic XML files
Screenshot:
Features
Features
Transitions, zooming and panning effect You can choose from Random, Wipe from Left, Fade to White, Cross Expansion and other 60-plus transition effects. Zooming and panning effect is optional for advanced flash templates.
XML-driven This flash slideshow are XML-driven. The XML document allows more personalized controls over the flash.
Auto-playback and repeat mode The flash slideshow will play automatically after preloading, and it can repeat playback.
Dynamic customization Besides XML control, the advanced templates provide many more custom options, so that you can create slideshow that fits into your existing web design: width , height, border color, background color, thumbnail size, etc. More about dynamic customization
Usage and demo visit: http://webdesigndevelopment.blog.com...swf-xml-files/

Please excuse the bump...
Anyone with a LR flash gallery that starts with slideshow in play mode?
Can it even be set to do this?
The only code in the style.xml that looks like it might be realted is line 12 <playOptions playMode="pause"/>, changing that to "play" does nothing.
Thanks,
Donnie

IR with dynamic pivot

Hi all
We have been designing resource management system and want to provide flexible way to extend resource properties at runtime. So we are storing resource properties in a single table, e.g.
select * from _kv
ID K V
1 name Bob
1 age 30
1 gender male
2 name Susan
2 status married
convert to
+-----+-------+--------+----------+
| key | color | height | whatever |
+-----+-------+--------+----------+
| 1 | green | 15 | --- |
| 2 | --- | --- | lol |
+-----+-------+--------+----------+
example of dynamic pivot Dynamic SQL Pivoting &#8211; Stealing Anton&#8217;s Thunder</title> //<title>AMIS Technology Blog…
Is it possible to create interactive report with dynamic columns updated when _kv will be changed?
Is it possible to create add/edit dynamic form depends on key set if we add value type description?
Thanks

make sure you put some thought into your database design before you go too far.
There are many horror stories about EAV based schema designs. (which this design seems to be heading.)
Read up on them before you go too far.
-- back to being on topic --
AFAIK you can not do dynamic SELECT with an Interactive Report.
However, you can with a Basic Report. But, it is non-trivial. (ie it is difficult to do)
Basic Report can use a "function returning SELECT statement".
You will also need to name the columns based on a different function.
In order to 'synchronize' the column names with the SELECT statement, you will need a 3rd function that properly generates them.
This 3rd function MUST have an 'ORDER BY' clause.
Both the generateSELECT() function and the generateCOLUMN_NAMES() function will call that 3rd function.
From a code management standpoint, you will need to create a package that contains all three functions.
are you sure you want to go this route?
are you ready to go this route?
Again, think about your table designs.
MK

Xcelsius Engage: Issue with dynamic visibilty of data in dashboard

Hi,
We have a requirement for a dashboard where data for 5 Sites need to be displayed as per 17 KPIs and 12 different rolling months.
Raw sample data looks like below-
SITE KPI        ActYTD Act(Pre Month) PlanYTD Plan(Prev Month) VarianceYTD Variance(Pre Month)
A       On-Time   76.7         82.92                  111.50       109.50             -1                    -1
B       Delay       73.70       80.00                   79.75        77.75             -1                     1
There are 5 different Sites and 17 different KPIs.
Based on the raw data that we get from BI (7.0 query output), we manipulate it in MS excel, using some lookups and formulae to obtain certain values, store them in designated sheets and then Xcelsius (different components) use these sheets as source.
We are having three levels of navigation-
1. Main screen listing all KPIs site wise and months ( the site and months could be selected from Combo boxes at the top). The KPIs are bind to a list view, each row is a selectable KPI leading to level two navigation.
2. Level two contains the details for each KPI ( values and trend chart). Selection in the chart for a Site leads to level 3 navigation.
3. Level 3 screen contains data by KPI and by Site for 12 rolling months ( The sites could be changed from a drop-down).
There are custom navigation buttons (home/back) to enable navigations between the screens.
We are using 3 panel containers, 2 list views, 4-5 combo boxes and some hidden button ( with dynamic visibilty).
The workbook has 8-9 different sheets, though the Xcelsius componets are bound to only 3 sheets.
Things work fine till we select 14th KPI , but Xcelsius starts behaving awkwardly when we select 15th KPI and further.For the selected KPI, the level two screen would load for a flash of a second and then the control comes back to level 1 screen. We do not face this issue till 14th KPI.
In-order to eliminate possibiltes we did the following-
1. Changed the order of KPIs - issue persists
2. Changed the Excel option " Max. no of Rows" to 4000- issue persists
3. Decreased the amount of data to be loaded - issue persists ( though at max we are loading data for 2000 rows)
4. Decreased the no. of KPIs to 14 in level 1 list view - all works fine.
We have not noticed any gradual decrease in performance/load time till 14th KPI but everything goes for a toss when the 15th KPI is displayed.
We are on the latest Xcelsius patch ( patch 3).
We would appreciate any pointers/help to resolve this issue.
Thanks in advance for your time.
Best Regards,
Bansi.

How many total rows are you dealing with in your spreadsheet?
-Dell

Unable to get the data from a website with dynamically filled textboxes when accessing through myWb.Document.GetElementById("num1").InnerText;

Hi Team,
I am learning on webbrowser control and during the learning phase i have the following issue:-
My webbrowser [mywb in this case] is successfully navigating and displaying the website content in webbrowser control. However; that site has three textboxes with dynamically allocated text from asp script
code behind; I have tried to display these textboxes values by providing the correct id of these textboxes in my visual studio 2013 code; but I am not receiving any data except null. Can you help me on this as early as possible.
asp code written to dynamically assign the data to textbox:-
<%
myvar=Request.form("some")
Response.write("<input type=text id=num1 value=" + myvar+ ">")
%>
The code written in VS 2013 to access the textbox by its id when the DocumentCompleted event is triggered:-
string mystr ="";
mystr = myWb.Document.GetElementById("num1").InnerText;
MessageBox.Show(mystr);
Thank You in Advance.
Regards, Subhash Konduru

Hello,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Because the issue is related to website, I suggest that you can consult your issue on ASP.NET forum:
http://forums.asp.net/
for better solution and support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Problem with Dynamic Node & UI Elements

Hi,
                                        The scenario is to create an Questioaire.Since the number questions which I get from R/3 may vary, I have created the Dynamic Node which is mapped with Dynamic set of Radio button Group by index for options & Dynamic text view for displaying Questions.. A New Dynamic Node will be created for each set of Questions .The Number of questions displayed per page is controlled by the Static Counter Variable....
                                          Now the issue is ,if i click back button the count will be initialized so again it needs to trigger the DoModifyView(). at that time It is arising an exception "Duplicate ID for view & Radio button ..." because while creating Dynamic node i used to have "i" value along the Creation of node name...
for(i=Count;i<i<wdContext.nodeQuestions().size();i++)
               customnod=<b>nodeinfo.getChild("Questionaire"+i);</b>
                    if(customnod==null)
Its not possible to create a new node whenever i click the Back button.
At the same time i am not able to fetch the elements which had already created Dynamically...
How do i make the Next & back button work?
If anyone bring me the solution It would be more helpful to me.
Thanks in advance..
Regards,
Malar

Hi,
      We can Loop through the Node Elements but how can we do Option Button Creation for each set of question Options?. At design time we can not have the radio buttons,because we do not know how many set of questions are available at the Backend.

Creating Report using EPM Functions with Dynamic Filters

Hi All,
I am new to BPC, In BPC 7.5 i seen like we can generate EPM report using EVDRE function very quickly and easy too. Is the same feature is existing in BPC 10.0 ? if no how can we create EPM reports using EPM Functions with Dynamic Filters on the Members of the dimension like in BPC 7.5.
And i searched in SDN, there is no suitable blogs or documents which are related to generation of Reports using EPM Functions. All are described just in simple syntax way. It is not going to be understand for the beginners.
Would you please specify in detail step by step.
Thanks in Advance.
Siva Nagaraju

Siva,
These functions are not used to create reports per se but rather assist in building reports. For ex, you want to make use of certain property to derive any of the dimension members in one of your axes, you will use EPMMemberProperty. Similary, if you want to override members in any axis, you will make use of EPMDimensionOverride.
Also, EvDRE is not replacement of EPM functions. Rather, you simply create reports using report editor (drag and drop) and then make use of EPM functions to build your report. Forget EvDRE for now.
You can protect your report to not allow users to have that Edit Report enabled for them.
As Vadim rightly pointed out, start building some reports and then ask specific questions.
Hope it clears your doubts.

Running a SQL Stored Procedure from Power Query with Dynamic Parameters

Hi,
I want to execute a stored procedure from Power Query with dynamic parameters.
In normal process, query will look like below in Power Query. Here the value 'Dileep' is passed as a parameter value to SP.
    Source = Sql.Database("ABC-PC", "SAMPLEDB", [Query="EXEC DBO.spGetData 'Dileep'"]
Now I want to pass the value dynamically taking from excel sheet. I can get the required excel cell value in a variable but unable to pass it to query.
    Name_Parameter = Excel.CurrentWorkbook(){[Name="Table3"]}[Content],
    Name_Value = Name_Parameter{0}[Value],
I have tried like below but it is not working.
Source = Sql.Database("ABC-PC", "SAMPLEDB", [Query="EXEC DBO.spGetData Name_Value"]
Can anyone please help me with this issue.
Thanks
Dileep

Hi,
I got it. Below is the correct syntax.
Source = Sql.Database("ABC-PC", "SAMPLEDB", [Query="EXEC DBO.spGetData '" & Name_Value & "'"]
Thanks
Dileep

Submit report with dynamic selections

Hi All,
I am trying to Submit a report with dynamic selections. I am using the option SUBMIT REPORT WITH FREE SELECTIONS.
But the dynamic selections are not getting passed.
Request you to kindly provide some inputs
My code is
DATA: trange TYPE rsds_trange,
      trange_line LIKE LINE OF trange,
      trange_frange_t_line LIKE LINE OF trange_line-frange_t,
      trange_frange_t_selopt_t_line LIKE LINE OF trange_frange_t_line-selopt_t,
      texpr TYPE rsds_texpr.
trange_line-tablename = 'PA0002'.
*trange_frange_t_line-tablename = 'PA0002'.
trange_frange_t_line-fieldname = 'GBJHR'.
trange_frange_t_selopt_t_line-sign   = 'I'.
trange_frange_t_selopt_t_line-option = 'EQ'.
trange_frange_t_selopt_t_line-low    = '1987'.
trange_frange_t_selopt_t_line-high   = '1987'.
APPEND trange_frange_t_selopt_t_line TO   trange_frange_t_line-selopt_t.
APPEND trange_frange_t_line TO trange_line-frange_t.
APPEND trange_line TO trange.
CALL FUNCTION 'FREE_SELECTIONS_RANGE_2_EX'
EXPORTING
    field_ranges = trange
IMPORTING
    expressions = texpr.
submit RPCADVQ0
VIA SELECTION-SCREEN
                WITH SELECTION-TABLE rspar_tab
                WITH FREE SELECTIONS it_texpr
                and returN.
Kindly provide your inputs
Regards
Reshma

Hi Reshma,
Use the FM - RS_REFRESH_FROM_DYNAMICAL_SEL before FREE_SELECTIONS_RANGE_2_EX.
data: trange type rsds_trange,
          g_repid type sy-repid.
g_repid = 'RPCADVQ0'.
call function 'RS_REFRESH_FROM_DYNAMICAL_SEL'
    exporting
      curr_report        = g_repid
      mode_write_or_move = 'M'
    importing
      p_trange           = trange
    exceptions
      not_found          = 1
      wrong_type         = 2
      others             = 3.
if sy-subrc eq 0.
" Do the changes to the trange
CALL FUNCTION 'FREE_SELECTIONS_RANGE_2_EX'
EXPORTING
field_ranges = trange
IMPORTING
expressions = texpr.
submit RPCADVQ0
VIA SELECTION-SCREEN
WITH SELECTION-TABLE rspar_tab
WITH FREE SELECTIONS it_texpr
and returN.
endif.
Cheers,
Kothand

CreateTextfield with dynamic height?

Similar Messages

Maybe you are looking for