Creating a Document Category

Hi SDNers,
We are running ECC 6.0/Funds Management with Former Budgeting.
When running FMMC to close Earmarked Funds, the program results in a short dump.  When run in dialog mode, the following error message is displayed:
Document Type 11 is not defined for document category 001.
The procedure recommends going to Funds Management Customizing to define a document type for document category 001.  When I go to the IMG, there is not an option for doc. catg. 001 and it will not let me create it.
I have two questions, if the document type is not defined for the document category, how can earmarked funds posting reflect this?  Table KBLK shows the document type 11 assigned to document category 001.
The second question is how does one create a document category, so that Doc. Types can be assigned?
Thanks,
-Patrick

Patrick,
It sounds like you may have some kind of data inconsistency with this document.  The earmarked funds document categories are not configurable.  They are defined with the domain FMRE_BLTYP.  The valid values are:
002     Funds transfer
020     Funds Block
030     Funds reservation
040     Funds precommitment
050     Funds commitment
060     Forecast of revenue
I would look in table TKBBA and see what category your document type 11 is tied to.  If it's not 001 (which I highly doubt it is), then your data in KBLK is incorrect.
Hope this helps.
Thanks,
Todd

Similar Messages

  • Displaying Image in Document Category Created through N2T6

    Hi Experts,
           I am Creating a Document Category in ISH from Tcode N2T6 i want to display the image on the Screen Created  for Document   Category.
             Please let me know how to display image in document category.
    Regards,
    Rajesh

    Hi Rajesh,
    there are a few options to integrate images into a PMD application. At the end it depends on your use case. For example an image taken by CT would be shown using an external application, the DICOM viewer. On the other hand a simple picture used for illustration purpose can be easily integrated.
    In case you want to use an external application, I would recommend to implement a button in the PMD or the application toolbar to call the viewer application.
    In case you want to embed the picture into the PMD you have to utilize a Link element. There are a few implementations shipped with the standard delivery. For details check the online help [here|http://help.sap.com/erp2005_ehp_05/helpdata/en/4d/c7854878c86d4be10000000a42189e/frameset.htm] In paticular please check the PICTURE link element type.
    In addition you can also implement your custom link element type.
    Also I would like to share with you, that in the next delivery, Siemens will shipped a link element type for image management. It was designed to work with various image management services, but for now we have a implementation with imagic ims only.
    Hope this helps.
    Axel Biernat
    Siemens AG
    Product Commercialize - Knowledge Transfer

  • How to Add Document Category in Oracle Shipping?

    I am learning Oracle Order Management and I am trying to create new document category. I am doing exactly as written in Oracle user guide and oracle student guide. However, when I create a document category in Order Management: Navigation> Shipping> Setup> Documents> Document Category and enter the required info i.e Category name and Document and enter other optional info and save the document category; I receive the following error
    APP-WSH-228014: This category already exists or overlaps with an existing category definition.
    I am giving the category a new name. Oracle document says that we can add more than one category for the same document.
    Can someone please help resolve this issue.
    Regards,
    Masood

    Hi
    Refer the below document
    Cannot Create Document Category In Shipment Documents 'APP-WSH-228014: This category already exists or overlaps with an existing category definition.' (Doc ID 1368545.1)

  • Document Category Error while creating PO

    Hi All,
    When I am creating PO with reference to contract system gives error that "Document type MK is not assigned to document category "F"  I am not aware of assignment of document category to document type. Please can anyone tell me where to assign the same.

    Hi,
    Check if you have renamed any of the item categories in  Define External Representation of Item Categories..
    I doubt there is a standard Item category such as "F"
    You need to check the definition for Document Type under Contract and ensure that "F" is also one of the allowed item categories under document type MK.
    MM- Purchasing- Contract - Define document types
    Thanks & Regards
    Merwyn

  • Error While Creating Sales Document - on a new rollout

    Dear Friends,
            While going for new Plant Creation on a Rollout, i am getting the following error while creating Sales Order,
    Kindly suggest the needy to me,
    " _Template and one-time material processing is not activated                                                                               
    No determination routine is specified for the SD documents for the 
    permitted combinations                                                                               
    The combination of sales organization, document category, and      
    document type or delivery type for the SD document is not permitted_ "
    Thanks & Regards
    T.Arulvanan

    Dear Freind,
    Have you assigned the Sales Area to the Document types
    T-code : OVAZ.
    Also Check the Sales Applications  V/c2
    Can you double click on the error and See what is the datails of the error appearing?
    Regards,
    Amlan Sarkar

  • Error while creating purchasing documents

    Hi,
    Iam a new user to Material Management unable to create any Purchasing docments (PR,RFQ,P.o..etc).
    As Iam trying to procure a material for stock, selected the Accountassignment as Unknown.
    got following two errors
    1.Unknown account assignment not defined for use here
    2.Source not included in list despite sorce list requirement
    pls suggest me something to avoid these errors and create P.Os.
    Thanks

    Hi,
    I got some clue ,
    1. As I have specified it is a stock material, It should not ask for any account assignment.
    It is asking because I have not updated the material quantity,value updations in IMG settings for the material type
    2.The issue was I have checked the source list for plant in the sorce list configuration settings (SPRO> Materials management>Purchasing>Sourcelist>Define source list requirement at plant level)
    And I have not maintained the source list.
    If you check the above setting, you need to maintain source list for the material
    As you specified I have checked the configuration for combination item category-account assignment for item category that was used when creating purchasing document.
    for standard itemcategory,unknown account assignment type has been defined.
    Now I could able to create P.Os for stock material by updating qty,value updation in material type, and if I don't update this, and use account assingment as unknown I'm getting the saemerror as "unknown account assignment not defind for use here"
    pls let me know how to avoid this error, hep me what are the required settings for making a P.O for accountassignment categories
    Thanks

  • Error creating accounting document for a credit note

    Hi All,
    I am facing an issue while creating an accounting document for the credit note created.
    The scenario is as follows:
    Created a credit memo --> created credit note --> create accounting document
    While creating accounting document, i'm getting an error message as 'The G/L account XXXXXXXX requires an assignement to CO object'.
    Please let me know why i'm getting this error and how to overcome this issue.
    Thanks,
    Anil Kumar

    While creating accounting document,
      i'm getting an error message
    First of all, I am not clear on your above statement as in normal circumstances, once you generate a credit memo, in bacground an accounting document will also be generated.
    In your case, I believe while saving the credit memo, system throws the error to maintain CO object in which case, do the following:-
    Go to TCode KA02 enter the controlling area, give the G/L acoount No and click on Master data tab.  There  select  "Default Acc Assgmnt" tab  and enter Cost centr and save.
    Next Go to FS00, input the G/L Account and click on Edit Cost Element on top.  There click on Basic Data and for the field CElem category, maintain the required numeric value.  Now select the tab Default Acct Assgnmt and there maintain the required cost center and save.
    thanks
    G. Lakshmipathi

  • Document doesn't have document category C in follow up document

    Hi,
    I have created a Return order in Services, Now on the Return order i have a requirement to create a follow up document in case of warranty,1st either we can issue a credit Note Or we can make a subsequent delivery free of charge on the same Return order, how ever when the follow up document is created it gives an error Document category is not C,but when the order is created individualy means without any preceding document subsequent deliver or credit memo both the orders are succesfully replicated.
    I tried to get the category which was maintained as 'H' for subsequent delivery to "C" even after that the error is still coming the same error is coming for both the follow up documents .
    Please suggest the same.
    Message no. CRM_ORDER_MISC 020
    Transmission log
    Document 5000044 doesn't have document category C but (Notification E V2 068)
    Sales document 0000080051 was not changed (Notification E V4 219)
    Regards
    Nikhil Chugh

    Hi,
    from crmfiltab
    I get the message only when creating the return as a follow-up. Both the sales order and return replicate without error if I create them separately.
    regards Camilla

  • Create delivery  document for line item 5 only manually

    Hi Sap Experts,
    We have scenario, we have created sales order with 10 line items while creating delivery we don’t want to show all the 10 line item to delivery creator (creating delivery manually).
    We will send him mail saying that create delivery  document for line item 5 and we will provide him material number and delivery date and shipping point with sales order number.
    We don’t want to use partial delivery option that split the delivery and we don’t want to use VL10C tcode also.
    What are options we have and how to customize this scenario?
    Kindly suggest.
    Regards,
    Kotli

    Can you be clear in your requirement?
    One requirement is user should not select line items other than the one instructed to them
    The other requirement is delivery split should happen based on item category
    If your requirement is first one, you need to go with user exit USEREXIT_MOVE_FIELD_TO_LIPS in include MV50AFZ1 but I am not sure, on what logic, coding to be included in this exit.  If your requirement is second one, then just try in your system and share the outcome how system is functioning.  You will come to know how standard SAP works.
    G. Lakshmipathi

  • Document category name for Standard Invoice is in disable mode ples urger!!

    Hi All,
    when i am creating the invoice in invoice work the document category is in disable mode. I did all the required setups but it is not allow me to enter document category.
    Version is 11.5
    Regards,
    Raju.
    Edited by: 956206 on Sep 5, 2012 3:34 AM

    Hello.
    From the User Manual:
    Method:
    Select the method that your documents are entered, automatic or manual.
    -Automatic is when a concurrent process (e.g., an external program) enters transaction data into an Oracle Application, which generates documents.
    -Manual is when a document is manually entered using a form in an application.
    Octavio

  • Could not create discount document

    Hello!
    We are having the following error either on automatic (F110) or manual payments (F-53) when generating a discount documents:
    Manual Payments error:
    Could not create discount document
    Message no. 8A605
    Automatic Payments error:
    FF848: Entry of tax for C1 000 is not possible because of tax base 0      
    I think that the error is generated because the tax base amount is not being completed automatically.
    I have already checked discount documents customizing and I´ve founded everything ok.
    Also Tax Category field  for the discount GL account is completed.
    Any help would be appreciated.
    Regards.

    Hi Nirav, thank for your answer.
    I have already check that field that you mentioned.
    It is exactly the way you told me.
    Do you have in mind anything else?
    Regards.

  • Create Billing Document from Sales Order (Without Delivery)

    Dear Experts,
    Pls note, presently we are creating Billing Document (VF01) from Outbound Delivery Number after Post Good Issue. All sales Document like Billing Document, Output Type, Invoice Type has been configured for this process and we are doing this without any error. Fyki, we have configured lots of Z Order, Billing & Delivery type to do this processes.
    But for one of this order type we need not do any delivery. We want to create Billing Documents from sales order directly (without doing any Outbound Delivery).
    So, would u pls advise the steps how can we configure and assign Order Type, Billing Type or any other type  to meet above requirement.
    Thanks in advance.
    Best Regards.
    Ripon

    Hi
    There are two most important configuration:-
    1) In VOV8 for your Order Type maintain the Order Related Billing Document
    2) Maintain the Copy control setting in VTFA betwwen your Order Type and billing Type.
    Also note that if your line item is not require to be delivered then for your Item category maintain (in VOV7) not relevant for delivery and not relevant for scedule line.
    Regards
    Amitesh Anand
    Edited by: Amitesh Anand on May 24, 2010 5:09 PM

  • Where to find the document category in oracle purchasing for existing attachments?

    Where to find the document category in oracle purchasing for existing attachments and also how to create a new category?

    Hi Sanjay,
    We are looking to add the below 3 marked document categories to Purchasing.
    But here the application is for order management, how can we use them for purchasing?

  • New document category (0DOC_CATEG) for SD's Cubes

    Hi Folks
    I have a question, how can i create a new document category? You see, i have a cube (copy fromo 0SD_C03), but only with data from 2LIS_13_VDITM infosource, because only need billing information; with this cube i need to separate Returns, standar SAP BW credit memo (0DOC_CATEG="O") includes credit memos and returns so i need to separete them. Is possible create a new document category??
    Thanks in advance....

    Hi,
    As the record does not distinguish between credit memos and returns how do you identify the return? when you say a new document category do you mean to create one in the source system (R/3), if so then you would need to talk to the SD consultant responsible for R/3 if it is possible to do it.
    Secondly if you are able to identify returns based on some other field/Infoobject in the record then you could add a Flag in the Infocube and populate that based on the logic in update routine.
    Hope it helps.
    Cheers
    Anurag
    .......and don't forget to assign points if it helps.....

  • How to get SD Document Category

    Hello Friends,
    I am not a functional guy and so am having problem in knowing how SD Document Category is related to a customer.
    I have details like customer, sales organization, distribution channel, division inco terms etc.,
    I have to create a quote from a program outside of SAP. I am able to send all the data needed to create a quote except for 'SD Document Category'.
    Is there a way to search for this using the info that I have as mentioned above.
    I tried tables like VBUK, VBAK, VBKA, BVKD etc., but these are in no way related to customer etc., which I can use as keys to search for the right SD document category.
    Any help will be greatly appreciated.
    Thanks
    Ram

    Hi ,
    I am not in front of SAP, still suggestion is to check following tables:
    VBAKUK VBAK + VBUK
    VBUK Header Status and Administrative Data
    VBAK Sales Document u2013 General Header Data
    VBKA Sales Activities
    VBKD Sales Document - Business Header/Item Data
    VBPA Sales Document - Partners Header Data
    VBUP Item Status
    VBPA Sales Document u2013 Partner Item Data
    VBAP Sales Document u2013 General Item Data
    FPLA sales Document u2013 Items Conditions data
    VBFA Document Flow
    VBEP Sales Document Schedule Line
    VBBE Sales Requirements: Individual Records
    VEDA Sales Contract Data
    VBELN Sales and Distribution Document Number
    If you know where is doc catagory field , go and press F1 on it and then go in technical settings .
    Here you can get table and fields name.
    If you get field name , just do where use list of it . you will get the table.
    Hope it help you.

Maybe you are looking for