Creating a Plane On Wich Objects move

Okay, for my final Computer Science project I am creating a bomberman game. Originally I was going to use the gridworld case study's grid to put everything on, and then we decided not to use it. We are going to use a contious plane and snap bombs, pillars, and enemy paths to central locations while allowing the characters to move freely.
Here is my question, in the applet is there a way to make a sort of array plane? A set of points on which things can exist and be drawn? Also with user input can just certain sections of the board be redrawn without the entire board being redrawn ever single move? We were thinking about a double buffer but that might slow things down. Yes I know Java is not meant to do video games in, and using DX would be better, but this has to be in Java, and it is a very cool project. I can do everything else. I just need direction in how to make a plane like that in applets? Or would it just be better to place everything, store everything in an array, and just check for collision?

IntelliSense in a Java Development forum suggests a disconnect.
Java protocol is set/get prefix for object properties.
With .NET, it'll be just plain InfoObject.ParentID = <value here>
But I'm assuming you're not using .NET, since this post is in the Java Development fourm.
Sincerely,
Ted Ueda

Similar Messages

Issue in creating dev plan in talent management specialist role

Hi ,
I am facing issue in creating development plan through talent management specialist role . Actually in one system I have 2 location one is india & another one is USA . its working for india but when I search india employee its show no employee found . can you please guide me
Tarun

Hi Luke ,
According to one of your article , I run HRALXSYNC in r/3 , in that all indian employee are green but USA employee in RED . I found following error , can you please guide me that what is mean by that ?
The error occurred in program CL_HRRCF_INFOTYPE=============CM003 line 117
Qualification 90007487 does not exist
The incorrect HR object has the key 01NA90011026
The incorrect infotype record is 40601NA900110265105 1 1900010199991231
The error occurred in program CL_HRRCF_QUALIFICATION========CM001 line 69
Serious error; see log
The error occurred in program CL_HRRCF_CANDIDATE_INFOTYPE_BLCM00B line 99
Serious error; see log
The error occurred in program CL_HRRCF_INFOTYPE=============CM003 line 117
Qualification 90007487 does not exist
The incorrect HR object has the key 01NA90011026
The incorrect infotype record is 40601NA900110265105 1 1900010199991231
The error occurred in program CL_HRRCF_QUALIFICATION========CM001 line 69
Serious error; see log
The error occurred in program CL_HRRCF_CANDIDATE_INFOTYPE_BLCM00B line 99
Thanks
Tarun

How to add the Drawings while creating Inspection Plan

Dear all,
As we can attach the files in QM01 - Create Notofication thru "Choose an Object" .
In similiar way can "Choose an Object" object can be attached to Insp. plan or any other way to attach drawing.

in case of inspection if want to see the the drawing during Result recording then
You can create a document in Cv01n & attach drawing document ........
then
1.use it in Inspection Method & attach inspection method in the inspection lot.
2.use it in PRT as document & attach it in inspection.
In case of notification DMS( document mgt system-CV01n) can be used & attached in Notificaton.
Regards
Sujit

Cannot create weak reference to 'classobj' object

I am trying to run the python Script in a C# program using Iron Python I am getting this type of Error
cannot create weak reference to 'classobj' object
I am using this code for running the python code
var ironPythonRuntime = Python.CreateRuntime();
try
dynamic loadPython = ironPythonRuntime.UseFile("Program.py");
catch (Exception ex)
Console.WriteLine(ex.Message);

Hi Mahesh,
About IronPython issue, It's third-party product. Please redirect to IronPython forum. The link as below.
https://ironpython.codeplex.com/workitem/list/basic
After search this error,
this thread tells me.
Try to use virtualenv. It is used to separate many instances of python and it's libraries - you can have as many virtual environments as possible: python 2.5 , 2.6 , 2.7, whatever - with any combinations of libraries - so you can have for example five
python 2.6 instances with different sets of libraries configured.
By the way, here is also a blog talking about
Running IronPython Scripts from a C# 4.0 Program
Now I will move your thread to "off-topic" forum. Thanks for your understanding.
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Creating Inspection plan using BAPI

HI all,
I am using the FM 'BAPI_INSPECTIONPLAN_CREATE'. I am unable to update the Inspection characteristics as multiple entries. Its getting updated only the last item.
Expecting answer from the experts.
Ravi.

Hi,
you can check the BAPI_INSPECTIONPLAN_CREATE for the named purpose, the values you named are in the structure BAPI1191_CHA_C please read the BAPI documentation:
Functionality
You can use this function module to create inspection plans and all its subordinate objects.
You can create a key date view and the complete history of an inspection plan. It is useful to have a history when transferring data from external systems.
Example
You want to create an inspection plan with operations and inspection characteristics for key date 01.01.2000. Make an entry in the following tables for each object:
TASK
OPERATION
INSPCHARACTERISTIC
If you want to assign test equipment to the inspection characteristic in field ITEM_NO_OF_PRODUCTION_RESOURCE, you must have assigned this test equipment in PARAMETER PRODUCTIONRESOURCE.
Notes
If no error occurs during the transfer of data, the export parameters GROUP and GROUPCOUNTER contain the key for the task list created. A COMMIT WORK must be executed for writing data to the database.
All errors that have occured are logged in the export parameter RETURN. If there are inconsistencies, the inspection plan to be created is rejected
<b>Reward points</b>
Regards

I see a line when an object moves fast

Ok, I shoot a Video with My CANON XHA1S AT: 1440 X 1080 30 fps, with the speed of 60. I created a new project as you can see in Capture Shot.
I don't know why, But I suddenly see a shakey - line when a hand or any object moves close to the camera. Inside my Timeline I Slowed Motion few Tracks to 32%, the rest is at normal speed, When I check the speed for other Tracks it shows 99.9 %.
Any answer please
Thanks
Simon

Try rendering a small part (and exporting it) of your timeline and preview it. Is the line still there?
My experience now is that with the hacked Mercury, the preview is not always top notch but rendering is.
Are you using interlaced video (you seem to be)? If yes, and you are slowing down your footage the shutter speed you used will make a huge difference in your slows. Usually you want it to be double what you normally use. 60 would be the bare minimum. 250 would be great.
On my XH A1 (not your model) 120 works fine (increasing it to 250 would mean I have lots of light, like outdoors for example). BTW, try the 60i mode. It has *double* the frames, which is great for slows.

Unable to create a Planning Application

Dear All,
I am not able to create a Planning application. I logged in into the planning using 'admin' user , at the final step I get the error . I checked in the Essbase log file it gives the error as User/group admin already exists.
I tried with other user also , i get the same error . Please suggest me the remedy . Thank You so much

Hi John
When i started the planning service in command propmpt i get the error saying HSP_Action object not found. I checked in the Database and found that this table doesnt exists in the database. Then i reconfigured the database only, from Configuration utility and after that this table appears in the database. I again started the service in commnad it runs fine now. But when I try to login in to the planning , it gives the following error in command propmt.
java.lang.IllegalStateException: User provisioning requires CSS as the security
provider.
at com.hyperion.planning.appdeploy.HspManageAppSession.<init>(Unknown So
urce)
at com.hyperion.planning.appdeploy.HspManageAppSession.<init>(Unknown So
urce)
at HspCreateApp.Handle(Unknown Source)
at HspCreateApp.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl
icationFilterChain.java:237)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF
ilterChain.java:157)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperV
alve.java:214)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
eContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:520)
at org.apache.catalina.core.StandardContextValve.invokeInternal(Standard
ContextValve.java:198)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextV
alve.java:152)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
eContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:520)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.j
ava:137)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
eContext.java:104)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.j

Error while creating a Planned Order

Hi SAP Experts,
I have an error encountered while creating a Planned Order which is "Mode linkage problem with mode number".
Diagnosis:
An application program called an LCA routine and the following error occurred:
An order has at least one condition with mode linkage with the same mode number. The activities of this condition must have compatible modes. The modes are compatible when each mode of one activity has a mode for the other activity with the same mode number. The first activity that violates the condition is given in the return code table in ABAP.
Please enlighthen me what is this error and what should be done to this error.
Thanks in advance,
Raymond

Check the PPM or PDS being used in the Planned Order.
Most likely you have a Setup Activity followed by Produce Activity. However the Mode (i.e. Resource) used in the two activities are different. The same Mode needs to be used both in Setup and corresponding Produce activity.
Hope this helps,
somnath

Error while creating Inspection plan

Hi,
While creating inspection plan in QP01, system is showing error "Material type ZROH is not defined for task list type Q''
Please help me to solve the error.
Thanks
Prasant

Hi,
This is due to the configuration error,
Just use T.Code OP50
Create an entry for task list type "Q" with material type "ZROH" and save,
Then try creating a Quality Inspection Plan, it will work
Regards
Merwyn

I have created several short (3-5 minute) movies using iMovie 10.0.6 and Yosemite. I want to create one movie that includes these short movies that I can then either burn to a DVD or show in iMovie's Theater. How can I do it?

I have created several short (3-5 minute) movies using iMovie 10.0.6 and Yosemite. I want to combine those short movies into one movie that I can loop and burn on a DVD or show in iMovie Theater. How can I do it? The movies are now shared to iTunes.

Another easy way to fix this.
What I've noticed is that upon upgrading your projects and events to work with iMovie 10, initially it will work... Until you quit iMovie and reopen it again. Any events with hashtags will show up without the star next to the iMovie event. SO, if you happen to read this, after upgrading to iMovie 10 from its predecessor, immediately change the event name to NOT include a hashtag/pound symbol.
Otherwise, if it's too late, you can either do the above or this...
Hold down option and click on iMovie. This will prompt you Locate, Create a New Library, Cancel this window, or Choose a different library. What you want to do is create a new library, call it whatever you want to, this will only be temporary. After the program opens, it should be a blank Library. Then go to File > Open Library > iMovie Library (your original library) and proceed to change the name of your events. Quit the program. Go into your Movies folder in Finder, delete the library you temporarily created, and your back in business.

Can I Create a New User Account and Move Existing Account ???

Lion was reinstal.
I'm suspecting issue with one user account.
Can I creat a new user account and move all my files to that new user?
What are the impact?
How about permissons on this files?
What about the Library Folder?
Thank you for your help and support.
BigBlaze

This should help you out after you have created the new user account. You are trying to make it much more complex than it needs to be. Just follow the directions in:
Transferring files from one User Account to another.

Is there a way to create a plan guide for this query?

How can i create a plan guide for this query，suppose i can't change the query text:
USE AdventureWorks2008R2;
GO
SET NOCOUNT ON;
GO
-- query plan statement starts
DECLARE @Group nvarchar(50), @Sales money;
SET @Group = N'North America';
SET @Sales = 2000000;
SET NOCOUNT OFF;
SELECT FirstName, LastName, SalesYTD
FROM Sales.vSalesPerson
WHERE TerritoryGroup = @Group and SalesYTD >= @Sales;
-- query plan statement ends
AdventureWorks2008R2's parameterization option is simple, i want this type of query can reuse plan:
DECLARE @Group nvarchar(50), @Sales money;
SET @Group = N'Other Country';
SET @Sales = 88;
SET NOCOUNT OFF;
SELECT FirstName, LastName, SalesYTD
FROM Sales.vSalesPerson
WHERE TerritoryGroup = @Group and SalesYTD >= @Sales;
I tried many times ,but it didn't work:
declare @xml nvarchar(max) -- the plan i want to reuse
set @xml = (select cast (query_plan as nvarchar(max))
from sys.dm_exec_query_plan (0x060006001464570B405D92620200000001000000000000000000000000000000000000000000000000000000))
-- create plan guide
exec sp_create_plan_guide
@name ='Test'
,@stmt=N'SELECT FirstName, LastName, SalesYTD
FROM Sales.vSalesPerson
WHERE TerritoryGroup = @Group and SalesYTD >= @Sales;'
,@type =N'sql'
,@params =N'@Group nvarchar(50), @Sales money'
,@hints = @xml;
Thanks.

I guess you don't wanna fire these queries "adhoc" but prepared instead to reuse the plan:
exec sp_executesql N'SELECT FirstName, LastName, SalesYTD FROM Sales.vSalesPerson WHERE TerritoryGroup = @Group and SalesYTD >= @Sales',
N'@Group nvarchar(50), @Sales money', N'Other Country',88
exec sp_executesql N'SELECT FirstName, LastName, SalesYTD FROM Sales.vSalesPerson WHERE TerritoryGroup = @Group and SalesYTD >= @Sales',
N'@Group nvarchar(50), @Sales money', N'North America',2000000
Bodo Michael Danitz - MCT, MCITP - free consultant - performance specialist - www.sql-server.de

How to print a message in the Window created out of a Frame Object

Hello,
I created a class extended from Thread class
I want to print a message in Run method : in the Window created out of a Frame Object in the main function.
I used System.out.println function, but nothing is printed on the screen
what other function can I use, without using Drawstring method in ie public void paint(Graphics g)Thank you

Erm...I don't know whether this is acceptable or not, but...if you want to create out of the main frame, why dun u you create a new frame with a button there, so it seems like a pop-up windows (***or like JOptionPane.showMessageDialog)
P.F.Boy

Error while creating manual planned order in apo

Dear expert
While I am creating manual planned order i am getting error as message /sapapo/rrp251
Every thing is correct BOM and PV's no error after consistency check and it getting succesfully transffered to APO and it is also visible in APO
But while creating manual planned orders planned order are not getting generated I am using BLock planning with PPDS
Please help How to resolve it
Regards
Virender

Hi
The error message /SAPAPO/RRP251 - Error occurred while creating order means While creating an order, the system encountered problems, such as, for example, no available components or components that are available late, orders that could not be scheduled, and so on.
I think system attempted to solve the availability problems by using alternative procurement options. This was not successful. The order could not be created. Check the exceptional situations in the planning protocol, under Goto -> Planning log, and deal with the causes of the exceptional situations if this is possible or necessary.
Thanks
Amol

Creating maintenance plan "MaintenancePlan" (Error)

Hello, I get the error
Creating maintenance plan "MaintenancePlan" (Error)
when I try to create a maintenance plan. I checked and the Microsoft Web site and
other forums said it may be that integration services is not installed so I tried installing it
and it said that it is already installed.
The accompanying messages with the report are:
ADDITIONAL INFORMATION:
The connection type "ADO.NETQL" specified for connection manager "{C72T6E0B-6CE7-4138-A8D9-BFE8897900700}" is not recognized as a valid connection manager type. This error is returned when an attempt is made to create a connection manager for an unknown connection type. Check the spelling in the connection type name.
(MaintenancePlan)
The connection type "ADO.NETQL" specified for connection manager "{C72CT60B-6CE7-4138-A8D9-BFE8897900700}" is not recognized as a valid connection manager type. This error is returned when an attempt is made to create a connection manager for an unknown connection type. Check the spelling in the connection type name.
(MaintenancePlan)
- Adding tasks to the maintenance plan (Stopped)
- Adding scheduling options (Stopped)
- Adding reporting options (Stopped)
- Saving maintenance plan "MaintenancePlan" (Stopped)

Sharp,
Do you still need help with this?
Thank you!
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Creating a Plane On Wich Objects move

Similar Messages

Maybe you are looking for