Error while creating Inspection plan

Hi,
While creating inspection plan in QP01, system is showing error "Material type ZROH is not defined for task list type Q''
Please help me to solve the error.
Thanks
Prasant

Hi,
This is due to the configuration error,
Just use T.Code OP50
Create an entry for task list type "Q" with material type "ZROH" and save,
Then try creating a Quality Inspection Plan, it will work
Regards
Merwyn

Similar Messages

Errors while creating Inspection plan using BAPI_INSPECTIONPLAN_CREATE

Hi All,
I am writing an upload tool for inspection plans. In this program I use bapi: BAPI_INSPECTIONPLAN_CREATE.
I made an extraction of a excisting inspection plan with SXDA_TOOLS which uses the same bapi and filled the bapi structures with the similar data. Now I am getting strange messeges in the return structure as below.
1. Material is not maintained for plant NNNN. But the material is mainained for that plant.
2. Consistency check not successful when creating operation
3. Inspection characteristic cannot be uniquely assigned to one operation
Let me know your suggestions
Thanks,
Sabu

Hi All,
Have any one used this BAPI, BAPI_INSPECTIONPLAN_CREATE to create Inspection Plan ?
Can you help me on above errors?
Thanks in advance,
Sabu

Error while uploading Inspection plan

Dear Friends,
I am creating inspection plans using BDC. The MIChas 2 versions. When i am using version 1, the inspection plan is created. Whereas when i am using MIC version 2 i am getting error "error occured while checking type group".Kindly let me know how do i resolve this.
Regards
Vivek

Hi,
Thanks for the reply. when i am trying to create a inspection plan in other plant, we have 4-5 sampling procesures to select from. But for this perticular plant where we are having problem, its showing only one. How do i get more options?How do i extend a sampling procedure to a new plant.
Vivek
Edited by: vivek mankad on Feb 23, 2010 7:57 AM

Error while creating a Planned Order

Hi SAP Experts,
I have an error encountered while creating a Planned Order which is "Mode linkage problem with mode number".
Diagnosis:
An application program called an LCA routine and the following error occurred:
An order has at least one condition with mode linkage with the same mode number. The activities of this condition must have compatible modes. The modes are compatible when each mode of one activity has a mode for the other activity with the same mode number. The first activity that violates the condition is given in the return code table in ABAP.
Please enlighthen me what is this error and what should be done to this error.
Thanks in advance,
Raymond

Check the PPM or PDS being used in the Planned Order.
Most likely you have a Setup Activity followed by Produce Activity. However the Mode (i.e. Resource) used in the two activities are different. The same Mode needs to be used both in Setup and corresponding Produce activity.
Hope this helps,
somnath

Error while creating manual planned order in apo

Dear expert
While I am creating manual planned order i am getting error as message /sapapo/rrp251
Every thing is correct BOM and PV's no error after consistency check and it getting succesfully transffered to APO and it is also visible in APO
But while creating manual planned orders planned order are not getting generated I am using BLock planning with PPDS
Please help How to resolve it
Regards
Virender

Hi
The error message /SAPAPO/RRP251 - Error occurred while creating order means While creating an order, the system encountered problems, such as, for example, no available components or components that are available late, orders that could not be scheduled, and so on.
I think system attempted to solve the availability problems by using alternative procurement options. This was not successful. The order could not be created. Check the exceptional situations in the planning protocol, under Goto -> Planning log, and deal with the causes of the exceptional situations if this is possible or necessary.
Thanks
Amol

Error while creating Maintenance Plan

Hello,
When I am creating a Maint Plan, I am getting error
No packages have yet been assigned to the maintenance item 143
Message no. IP364
How do I solve this??
Narendra

Hi Narendra
While creating Task List, for all operations u have to maintain the maintenance packages. According to the Maint. Pack only it will schedule the operations and release the order for the particulaer interval...
under operation tab
left side bottom conner... click it and you cna assign...
For Creating maintenance package... TCODE : IP11
- Pithan

Error while creating Quality Plan

Dear Experts,
While creating the Quality Plan following error is coming -"Error occured when checking type "
In the log of task list following error is appearing - "Op. 0060, CH 0060:char. iden % used for QDI several times in task list"
Please give your valuable suggestion onto this.
Thanks
Sumit

It means you are sending down the same characteristic to an external system like LIMS more then once.
I believe this is a warning. Not a hard error but I'm not 100%sure.
Craig

Error while creating hyperion planning application in 11.1.1.1.0

Hi All,
I am using EPM system 11.1.1.1.0 and i get the following error while trying to create a new application using Hyperion Planning:
Unable to find JDBC_CATALOG key for application: ABC1+
Connection to the datasource created successfully.+
in cpp -Created NonUnicode App:ABC1 0+
Unable to create Analytical application. Exiting Application Creation.+
Exception in Application Creation :Unable to create Analytical application. Exit+
ing Application Creation.+
java.lang.IllegalStateException: Unable to create Analytical application. Exitin+
g Application Creation.+
at com.hyperion.planning.HspManageApplication.createApp(Unknown Source)+
at com.hyperion.planning.appdeploy.HspManageAppSession.createApplication+
*(Unknown Source)*
at HspCreateApp.Handle(Unknown Source)+
at HspCreateApp.doPost(Unknown Source)+
at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)+
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)+
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl+
icationFilterChain.java:252)+
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF+
ilterChain.java:173)+
at HspValidationFilter.doFilter(Unknown Source)+
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl+
icationFilterChain.java:202)+
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF+
ilterChain.java:173)+
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperV+
alve.java:213)+
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextV+
alve.java:178)+
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.j+
ava:126)+
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.j+
ava:105)+
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineVal+
ve.java:107)+
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.jav+
a:148)+
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java+
*:869)*
at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.p+
rocessConnection(Http11BaseProtocol.java:664)+
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpo+
int.java:527)+
at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFol+
lowerWorkerThread.java:80)+
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadP+
ool.java:684)+
at java.lang.Thread.run(Unknown Source)+
java.lang.RuntimeException: Create application failed.+
at com.hyperion.planning.appdeploy.HspManageAppSession.createApplication+
*(Unknown Source)*
at HspCreateApp.Handle(Unknown Source)+
at HspCreateApp.doPost(Unknown Source)+
at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)+
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)+
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl+
icationFilterChain.java:252)+
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF+
ilterChain.java:173)+
at HspValidationFilter.doFilter(Unknown Source)+
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl+
icationFilterChain.java:202)+
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF+
ilterChain.java:173)+
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperV+
alve.java:213)+
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextV+
alve.java:178)+
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.j+
ava:126)+
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.j+
ava:105)+
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineVal+
ve.java:107)+
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.jav+
a:148)+
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java+
*:869)*
at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.p+
rocessConnection(Http11BaseProtocol.java:664)+
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpo+
int.java:527)+
at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFol+
lowerWorkerThread.java:80)+
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadP+
ool.java:684)+
at java.lang.Thread.run(Unknown Source)+
Error terminating Essbase connection: java.lang.NullPointerException+
If somebody can please help me resolve this issue , it would be great.
Thanks in Advance.
Alicia

I suspect that this is caused by an "incorrect" datasource definition when you create a new one.
I noticed that when I created an Essbase DB through the Essbase Enterprise Admin Service, it only allowed me to create one for localhost, not my server name EVEN if when the "Manage Data Source" validated the connection.
This points to one of the myriad of apps inconsistently trying to resolve a server name.
So, in EAS, see if you can connect to your local Essbase install and if successful, use the exact same params for you Workspace Application.
Hope that helps.

ERROR WHEN CREATING INSPECTION PLAN

HI GURUS,
WHEN CREATE AN INSPECTION PLAN GET THE FOLLOWING ERROR
Op. 0010, CH 0180: Char. ident. SMS used for QDI several times in task list.
THIS BECAUSE MY CLIENT WANTS TO REPEAT THIS M.I.C TWICE.HOW CAN I SOLVE THIS
REGARDS
AMIT

Hi,
It is not a error message It is a warning message for Use the Same MIC in Multiple time, No problem just you can save the Inspection plan, It will not reflect any problem any where.
Regards,
S.Babusingh

Error while creating a planning connection in FR

Hi John,
I was creating a database connection to Planning from FR studio and encountered the following error
Error connecting to database connection TestPln: Error: Error getting CSS support information for driver [com.hyperion.ap.hsp.HspAdmDriver]
My Plnning and FR are on the same server.
Version is 11.1.1.3.0.956.
Please suggest

Has it ever worked? If it did and nothing has changed then it is worth restarting the services.
Anyway it is worth having a look on Oracle Support as there a few documents on there with the same type of issue.
Cheers
John
http://john-goodwin.blogspot.com/

How to add the Drawings while creating Inspection Plan

Dear all,
As we can attach the files in QM01 - Create Notofication thru "Choose an Object" .
In similiar way can "Choose an Object" object can be attached to Insp. plan or any other way to attach drawing.

in case of inspection if want to see the the drawing during Result recording then
You can create a document in Cv01n & attach drawing document ........
then
1.use it in Inspection Method & attach inspection method in the inspection lot.
2.use it in PRT as document & attach it in inspection.
In case of notification DMS( document mgt system-CV01n) can be used & attached in Notificaton.
Regards
Sujit

Error while creating a Development plan template

Hi Gurus,
I am facing errors while creating Development Plan Template.
This is how it goes :
When i click on Define Forms for Talent Assessment --> a wizard pops up & i select Development Plan :
In first step, I am giving Title,Integration with SAP Learning Solution (check) & a rating scale.
Now after clicking next, I am adding 2 development areas :
1) Training
2) Mentoring,
now as soon as I'm clicking on End Configuration, It displays 2 errors & 1 warning message :
error1 : Element Appraisal Template 'XXXXX' contains errors.Cannot change status.
error2 : Value type 000000XXX of value class Q does not exists
Warning 1 : You have maintained a description that is not displayed.
In PHAP_CATALOG, when I'm trying to manually release the Criterion Group (VB) or Appraisal template (VA), it does not allow me to do it.
Kindly let me know how to proceed further.
Regards
bharti

Hi,
Even though it gives the error,the new RTF template is uploaded and it is reflected when I query the template again.
But when I run the Concurent program and see the output,the output still shows me the old template.
Regards
Jujaar

Getting an error while activating a planning area "Enter values for planning horizon From and planning horizon To for the storage time profile level"

Dear S&OP community,
I am getting following error while creating a planning ares in a newly installed sandbox. "Enter values for planning horizon From and planning horizon To for the storage time profile level".
This what I did...
1) Created new attributes and master data objects and activated them successfully.
2) Time profile created and activated successfully
3) Trying to create planing area by assigning time profile in step 2 and assigned master data from step1..Unable to save the data and system returns
this error - "Enter values for planning horizon From and planning horizon To for the storage time profile level"
My understanding is time profile needs to be active but doesn't have to have values...
Any help is appreciated.
Thanks,
Krishna

YS,
Here are my time profile settings
Level       Name          Display Horizon - Past Display Horizon - Future
1             Monthly     -6                                       11
2             Quarterly     -2                                       3
3             Yearly        -1                                       2
Time profile is active and but time profile data is not loaded
Thanks,
Krishna

Error while creating the Inspection plan by T.C QP01

Hello Friends,
In QP01, When i am trying to create a inspection plan system throwing the error message "The inspection plan identifier exists already. Enter another."
Message no. QP054
But in QP02, When i checked for that material, Plant, Group Number, Group counter, Usage, Status, i didn't find the entry over there.
Actually my requirement is to create a inspection plan for a material and plant combination with speicfic Usage as 61(customer requirement and status 4) but when i am trying to create that system throwing the error message explained above.
Thanks and Regards,
Jitendra Chauhan.
Edited by: jitendra chauhan on Jun 1, 2010 4:28 PM

Hello Friends,
Thanks for your valuable answers.
I checked in table MAPL, for a particular material, Plant, Group Number and Group Counter, there is no entry.
Where as in table PLKO, for a particular Group Number and Group Counter, entry is there. Actually this Inspection Plan Group Number and Group Counter is assigned to multiple materials through Material Assignment. If i delete the entry for this in table PLKO, than for all rest of the materials also entry will be deleted.
Hence how to resolve this?
Actually for other material number, same plant, same group number and same group counter, entry exist. So can i simply go in the inspection plan of other material,same plant,same group number,same group counter and than inside the material assignment to assign the required material code, plant and the group counter number?
Looking ahead for valuable inputs from the genius.
Thanks and Regards,
Jitendra
Edited by: jitendra chauhan on Jun 2, 2010 8:09 AM

Error while creating Rough cut planning profile

Facing the following error while creating rough cut planning profile (mc35) in SOP for product group. "Work center x plant y does not exist for task list type 3". pls advise- do i need to create tsk list for product group? pls advise with tcode to be used.

pls check the (task list ) usage you have maintained in the Work center.
In OP45 , pls ensure that for the usage ,
task list type 3 (Rough cut planning profile) is included.
If it is not included there , pls include the TL type 3 for your usage and now the prob will get solved.
Regards.,
Sheik

Error while creating Inspection plan

Similar Messages

Maybe you are looking for