I see a line when an object moves fast

Ok, I shoot a Video with My CANON XHA1S AT: 1440 X 1080 30 fps, with the speed of 60. I created a new project as you can see in Capture Shot.
I don't know why, But I suddenly see a shakey - line when a hand or any object moves close to the camera. Inside my Timeline I Slowed Motion few Tracks to 32%, the rest is at normal speed, When I check the speed for other Tracks it shows 99.9 %.
Any answer please
Thanks
Simon

Try rendering a small part (and exporting it) of your timeline and preview it. Is the line still there?
My experience now is that with the hacked Mercury, the preview is not always top notch but rendering is.
Are you using interlaced video (you seem to be)? If yes, and you are slowing down your footage the shutter speed you used will make a huge difference in your slows. Usually you want it to be double what you normally use. 60 would be the bare minimum. 250 would be great.
On my XH A1 (not your model) 120 works fine (increasing it to 250 would mean I have lots of light, like outdoors for example). BTW, try the 60i mode. It has *double* the frames, which is great for slows.

Similar Messages

  • Is it normal to see white lines when you press the home screen while it's charging?

    Hi, I have a brand new ipad mini and I'm noticing that while I'm charging it and it's in sleep mode, if I press the home screen button whitish/grey lines will appear on the bottom of the screen for a few seconds then fade away. Is normal when charging your ipad mini?

    No it is not.
    Are you sure that this isn't a phishing attack to get your password?
    Allan

  • Bad effect when draw object moving fast

    Hi, i have a shooter game where a gun can shoot a bullet.
    This bullet run fast so i move it whit X+=dx (dx is distance in pixel)
    When the bullet run too fast i ahve a bad effect, ot smootly.
    How i can resolve?
    Now my code is frame based i think, i use this:
    delay =30;
    Timer timer=new Timer(delay, new ActionListener(){
              public void actionPerformed(ActionEvent e){
                        processBulletPosition();
                        timer.setDelay(delay-delayed);
    public void processBulletPosition(){
             bullet.process(new 2DVector(10,0)); //2DVector is simple object contain dx and dy increment.
             repaint();
    //im use JPanel to paint, not canvas
    protected void paintComponent(Graphics g) {
              super.paintComponent(g);
              Graphics2D g2=(Graphics2D)g;
                    nanoTime=System.nanoTime();
                    bullet.draw(g2);
                    delayed=(System.nanoTime()-nanoTime)*1E-6; //make delayed in millisec
    }bullet proces is like this:
    public void process(2DVector vect){
              int dx=vect.dx;
              int dy=vect.dy;
              x+=dx;
              y+=dy;
    }Animation is very smooty, but when a bullet or an other object run too fast and dx increment is too many pixel the effect is very bad, and not smooty.
    I think i have same fps becouse i decrement delay time of a delayed time...
    Can you help me?
    Message was edited by:
    blow

    One problem is that I'm not sure how accurate Timer is.
    A standard approach in this sort of animation is to measure the time since the last redraw and move each component based on the time difference, rather than trying to keep the redraws an exact time apart and moving the components fixed distances.
    The distance/time approach reduces the effect of pauses in your rendering code caused by outside influences such as the garbage collector and other game logic such as spawning controllers etc. It won't eliminate pauses but it makes them much less noticable.

  • [LaserJet Pro 200 color MFP M276nw] only vertical lines when scanning, scanner broken?

    Hi all! I have a problem with the scanner in my HP all in one. If I scan (using the printer function or apples ImageCapture: same result) the output is just a lot of vertical stripes (in colors when in color mode). Not a trace of the image I try to scan. The lines are there even if i scan an empty white page. I see the stripes both when doing a preview scan and an actual scan. The problems are very similar regardless of if I use the flatbed or the feeder scanner (they are separate scanner hardware, yes?). I have updated to the latest software for the printer/scanner and I am connecting over bonjour via wireless. I am on Os X 10.9.1. Anybody having similar problems or is my scanner just plain broken? Thanks in advance!Jon

    , , I understand that both of you are seeing vertical lines when scanning from your Laserjet M276nw. First, make sure the printer is plugged directly into a wall outlet and not a surge protector. Now, so I know where to begin I'd need to know the following:If you are seeing the vertical lines when you copy as well as scan?Are you seeing the vertical lines when you copy from the flatbed? The document feeder? both?If you are seeing the lines from both the flatbed and the feeder are they in the same place?Once I know this I'll be better able to assist you.

  • 3d object moves when merging

    So I haven't played with the 3d features in Photoshop very much and gave myself (what I thought) was a simple project to play with. I'm trying to make a little cog with a recessed color band. Have been doing an extrusion using vector objects.
    I extruded them both separately, the gear to 2" the blue ring to 1.6". Matched up the camera and set them both to the same position
    Gear                                                         Ring
    I then made sure the cameras were in the same default position and tried to merge them 3D -> Merge 3D Layers. I read that I should hold shift to make sure the objects position doesn't change so I did that but it doesn't seem to make any difference because once I merge them the gear wheel scoots out of position and shrinks. I thought maybe I wasn't holding shift long enough but even holding it from before I ever click into the menu until well after it appears the merge is complete it does the same thing.
    Gear                                                          Ring
    The ring stays in position but the gear scoots forward and shrinks. I could just manually change the numbers back but I'm hoping to add more elements and taking a screen shot of each property before merging seems like I must be missing something.
    I'm on a PC running Windows 7 using Photoshop CC 2014.2.2

    I downloaded the psd.  You created the shapes layers with a Adobe program I do not use.  Then extruded them and merged and see the same thing I see when merging objects. They do not lineup like you expect them to.  I wrote. What I do reset the object coordinates I forgot to add was I also use the move to ground button for the objects after the using the reset Coordinates button.  Then I use the move tool to line up the objects relative to each other.   I duped you document and did that to your merged objects.  Here is the duped PSD with the objects reset mover to ground then positioned. Is this what you expected the merge to look like? http://www.mouseprints.net/old/dpr/GearTestDupe.psd
    Right click the above link and save it to your machine

  • Objects move when adding pages

    When I add/remove pages, or just move pages around in my document using the Pages panel, random objects on some pages move. They normally move just a slight amount, and stay with the page, but it is very annoying. I never know which objects will move, and I have to spend a lot of time trying to find the ones that have moved. Then if I move pages again, or add/remove pages, other random objects move. Does anyone else have this problem, or know how to stop it?
    Thanks!

    Try sending one of these files through .idml and see if it makes a difference. See http://forums.adobe.com/thread/526991  You may also want to try replacing the preferences. See http://forums.adobe.com/thread/526990  If you don't know what layout adjustment is, it's not likely that you've turned it on, and it probably wouldn't do this anyway except to move objects snapped to guides on master pages that have different left/right layouts.

  • When I render and Export there are these little lines around moving objects

    When I render and Export there are these little lines around moving objects, what are they and how do I fix it?

    The lines are caused by the video being interlaced.
    If you export to DVD they should no longer appear. However, if they don't disappear you can use the Deinterlace filter on the footage whilst in FCE.
    How are you exporting ..... QT Movie or QT Conversion ....... and what are you exporting to - the internet or DVD?

  • How do You See Anchor Points When Object is Unselected

    Hi, In Adobe Illustrator is there any way of viewing the anchor points of objects permanently even when an object is unselected? So you can see where the points are when you are making shapes with the pen tool. If there was, this would make it a lot easer to place the points on existing points of other shapes without having to guess where they are. Thanks for you help Gareth.

    Oh no! I just noticed when using it, that it is not as useful as I thought, because if you want to put a point anywhere near the 90º or 45º line from the last one it forces you to put in on that line, it's great that it lets you see the points on the other shapes but too bad it makes you do that. and you can't turn off smart guides while making a shape because it stops that shape and starts a new one. That's a bit annoying, so it's still easier to do it without smart guides guessing where the points are and correct them later with the white arrow if you missed any. Thanks for you help though. Gareth.

  • AVG says your server messed up my Verizon Yahoo email. The line that reads delete, move, not spam, more...does not load. I can see my email, I just cannot open

    I just spent over 5 hours in computer share with AVG. They said your server messed up my email account. I can get to my email account, but the line that reads "delete, move, not spam, more" never loads...therefore, I cannot delete email or anything else. My email account is at verizon yahoo. I need access to my email for various reasons, one of them being I pay many bills online and my email account is where I get certification that the payment went through!! My email will work through IE, though. I do not want to utilize IE to see my email...I use Firefox for everything and it would be a pain in the butt to have to switch to IE to access my email. Not to mention, I loathe IE--it's like using WEBTV! It's soooooo slow.... [email address removed, please do not post sensitive information in a public forum] is my email...

    Did the support person have you do the usual:
    When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Ctrl+Shift+r to reload the page fresh from the server.
    Alternately, you also can clear Firefox's cache completely using:
    "3-bar" menu button (or Tools menu) > Options > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now"
    If you have a large hard drive, this might take a few minutes.
    (2) Remove your Yahoo.com cookies (save any pending work first). While viewing a page on the site, try either:
    * right-click and choose View Page Info > Security > "View Cookies"
    * Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
    In the dialog that opens, you can remove the site's cookies individually.
    Then try reloading the page. Any improvement?
    In case one of your extensions is involved, could you test the page in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
    You can restart Firefox in Safe Mode using either:
    * "3-bar" menu button > "?" button > Restart with Add-ons Disabled
    * Help menu > Restart with Add-ons Disabled
    Not all add-ons are disabled: Flash and other plugins still run
    After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
    Any difference?

  • I Just received the update to iTunes, when I I look at the screen I do not see the normal icons.  When I select movies I do not get the new downloads unless i select the list in the sub file. How do I get backto the old method of seeing and using iTunes??

    I Just received the update to iTunes, when I I look at the screen I do not see the normal icons.  When I select movies I do not get the new downloads unless I select the list in the sub file. How do I get back to the old method of seeing and using iTunes??

    I can tell you that this is some of the absolutely worst customer service I have ever dealt with. I found out from a store employee that when they are really busy with calls, they have third party companies taking overflow calls. One of those companies is Xerox. What can a Xerox call center rep possibly be able to authorize on a Verizon account?  I'm Sure there is a ton of misinformation out there due to this. They don't note the accounts properly or so everyone can see them. I have been transferred before and have asked if they work for Verizon or a third party also and was refused an answer so, apparently they aren't required to disclose that information. I spent a long time in the store on my last visit and it's not just customers that get the runaround. It happens to the store employees as well and it's beyond frustrating.

  • HT1390 I just rented a movie on itunes but I don't know how to make it play.  I clicked out of itunes and now when I go back into itunes, I don't see a way to play the movie I just downloaded.  Help.

    I am a new at this.  I just rented and downloaded a movie, clicked out of iturnes and now when I go back into itunes, I don't see a way to play the movie that I just downloaded ten minutes ago.  I just want to watch it on my laptop.
    Help.

    Welcome to the Apple Community Vane_paranormal.
    If you rent a movie on your phone, you have to watch it on your phone, likewise if you rent it from the Apple TV you will have to watch it there.
    If you want to watch a rental on multiple devices, rent it from a computer.

  • Seeing the X on the padlock and a slash through the https on the address line when I use Outlook Web App

    I run exchange 2013 on windows 2008 R2 with a cert from VeriSign that is about 2 years away from expiration. I have a user who uses our Outlook Web App from home and keeps complaining he is "seeing the red X on the padlock and a slash through the https
    on the address line when he uses Outlook Web App"
    I go to EAC and the cert seems fine - ALTHOUGH I get a cert error on my IE when I login into EAC. So I'm wondering if I have a cert problem.
    Any help would be appreciate.
    RJM

    Hi,
    According to your description, I understand that login OWA and return an certificate warning.
    If I misunderstand you concern, please do not hesitate to let me know.
    I want to double confirm whether all user or some special user experience this issue. If only few of user face this problem, please try to double check the Trusted Root Certification Authorities Certificate Store in IE.
    Otherwise, please run below command to double check the status of Exchange certificate:
    Get-ExchangeCertificate | FL Identity,Subject,Status,RootCAType,NotAfter,NotBefore
    If the certificate expired, please pay attention to below link to renew Exchange Certificate:
    https://social.technet.microsoft.com/Forums/office/en-US/5dc21f0f-5e09-469f-90a8-efcbfd56f884/renewing-exchange-2013-certificate?forum=exchangesvrgeneral
    Thanks
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Allen Wang
    TechNet Community Support

  • Help! When I set Colunm_header_visible=off(web item), I can't see new line

    Please help!
    When I set COLUMN_HEADER_VISIBLE = OFF for Web Analysis item I can't see new line for input ready form. What should I do to fix this problem?
    Thank you
    Edited by: AlexNK on Jul 9, 2009 10:01 AM

    Please help!
    When I set COLUMN_HEADER_VISIBLE = OFF for Web Analysis item I can't see new line for input ready form. What should I do to fix this problem?
    Thank you
    Edited by: AlexNK on Jul 9, 2009 10:01 AM

  • TS4062 I lost all of my contacts and notes when attempting to move over music. When I try to restore the backup the day I want to restore to is not present. I do see a copy on my I cloud but I can't seem to retrieve it. What can I do?

    I lost all of my contacts and notes when attempting to move over music. When I try to restore the backup the day I want to restore to is not present. I do see a copy on my I cloud but I can't seem to retrieve it. What can I do?

    Hi bluegrandpanash,
    Thanks for visiting Apple Support Communities.
    If you backed up your iPhone to iCloud before updating the software, first try the steps under "Restore from an iCloud backup" in this article to recover your data:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/HT1766
    Best Regards,
    Jeremy

  • T's L's and I's move up a line when I print

    Why do all of the T's L's and I's move up a line when I print?

    Often just drying it out provides no resolution to existent problems, and only may serve to stave off additional damage.
    Th impurities in the water can conduct electricity, causing a short, which can be permanent. As well, and residual misture can contribute to corrosion, which will cause additonal shorts and open circuits, than can quickly escalate to total system failure.
    If there is any chance of saving your system, it will be necessary to act quickly. Do not try to dry the unit through traditonal drying methods. An electronic device will absolutely require disassembly. Be prepared to find the cost to repair can easily exceed the current value of the device.
    I advise you to immediately back-up your system, and render the unit for diagnosis and repair. Or you can try drying and hope and wait.

Maybe you are looking for