Creating Authorization Field as Local Object

Hello All,
I was creating new Authorization field and while saving, i was asked to save it as "Local Object"....
Can someone tell me what is meant by "Local Object" and what will be the benefits by doing so?
Adance Many thanks,
Regards
Geetha.

Hi,
Local Object means these Enhancement / Modification / Customization are not going to be included into any Package. Any change requests are of two types: Transportable or Local. If you decide not include your changes in any packages and thus not make this Transportable, i.e. the release and export phenomena will not be applicable there and you won't be able to create any task for a Local object.
Of course the authorization class, object and fields need to be moved through the Landscape and thus you need to include them into a Package. Preferably you should create a new Custom package (or may be already available) to move your changes though that package.
Let me know if you have any further query.
Regards,
Dipanjan

Similar Messages

Authorization for local objects only

Hi,
Is it possible to use authorizations in BW so that a user has read access to objects in a package, but has create/change access to local objects (i.e. $TMP)?
The reason I ask is that we don't want trainee's to damage existing objects but still have the ability to learn by developing. We do not have a BI sandbox environment, nor the time or capital to implement one.
Ian.

Thank-you for the response.
Do you mean something like flag all Z and SAP objects as not changeable for these users?
Development is still going on by different users and this should not be impeded.

A question about creating packages as local objects in ABAP

Hi,
I have a question about creating packages with SE80. Whenever I create a new package it is assigned a new transport request. After that, I can create new programs inside this package, and each time I can choose whether to assign the new program to a transport request or just save it as a local object (I often do this for test programs that I don't transport and I remove them once my tests have been done).
What I would like to ask is that, is it possible to create a package (and not just programs inside a given package) as a local object? so that every new object created in this package will be considered as a local object?
Thanks in advane,
Kind Regards,
Dariyoosh

Thomas Zloch wrote:
Please also check the F1 help for the package field e.g. in SE80, SAP standard is in range A-S and U-X, namespaces start with "/", so you should be save. I am using the T namespace for temporary stuff since a long time and did not have a problem so far.
> Thomas
>
> P.S. this applies to the package name only, of course
Thank you very much for this remark, I checked F1 help for the package field and in fact as you mentioned these ranges are for local objects.
Once again, thank you very much for your help.
Kind Regards,
Dariyoosh

How to add authorization field to a standard authorization object

Hi All,
I'm trying to limit user to can only create & change X type of order type in PM module. This can be fullfill by creating suer with assigned role with only allow X type of order type.
But when I assigned a display role which has authorization to display all order type (maintained as authorization object), now my user can create and change all order type.
How to limit user to can only create & change X order type and only display the rest of order type?
I assume by adding authorization field: AUFART(order type) in authorization object: I_TCODE will solve the problem, is it right? and is it possible to do that?
regards,
Andre

Hi,
your assumption is incorrect. First of all, adding a new field to standard authorization object is a bad idea. You would have to modify all checks for that object. For standard SAP object it means that you would have to modify many SAP programs.
The authorization object I_TCODE is checked in PM transactions. It gives you authorization to run that transactions. That object can't be used to limit what you do in that transaction or what order type you can process. You are looking for some other authorization object(s). You need to go to SU24 which gives you what authorization objects are checked in particular transaction. It does not have to cover all objects but it's a good starting point.
Cheers

Add Authorization field to Authorization Object (BTRTL to P_ORGIN)

Hi,
Could anybody please let me know the steps to add authorization field to an authorization object.
I want to add authorization field (BTRTL) to authorization object (P_ORGIN).
Please suggest..
Thanks is advance!

Hai..
Goto SU03- access Class HR -> Object P-ORIGIN-> then check/create the values for the field BTRTL.
For checking authorization Reports, we use command 'AUTHORITY-CHECK OBJECT'.

Authorization object with no authorization field

Hi Experts,
I have created authorization object with no field checking.
This is possible? Because i want to create this auth object for conversion only, and its not needed field checking.
Please advice.

Hi
See this and do accordingly
In general different users will be given different authorizations based on their role in the orgn.
We create ROLES and assign the Authorization and TCODES for that role, so only that user can have access to those T Codes.
USe SUIM and SU21 T codes for this.
Much of the data in an R/3 system has to be protected so that unauthorized users cannot access it. Therefore the appropriate authorization is required before a user can carry out certain actions in the system. When you log on to the R/3 system, the system checks in the user master record to see which transactions you are authorized to use. An authorization check is implemented for every sensitive transaction.
If you wish to protect a transaction that you have programmed yourself, then you must implement an authorization check.
This means you have to allocate an authorization object in the definition of the transaction.
For example:
program an AUTHORITY-CHECK.
AUTHORITY-CHECK OBJECT <authorization object>
ID <authority field 1> FIELD <field value 1>.
ID <authority field 2> FIELD <field value 2>.
ID <authority-field n> FIELD <field value n>.
The OBJECT parameter specifies the authorization object.
The ID parameter specifies an authorization field (in the authorization object).
The FIELD parameter specifies a value for the authorization field.
The authorization object and its fields have to be suitable for the transaction. In most cases you will be able to use the existing authorization objects to protect your data. But new developments may require that you define new authorization objects and fields.
http://help.sap.com/saphelp_nw04s/helpdata/en/52/67167f439b11d1896f0000e8322d00/content.htm
To ensure that a user has the appropriate authorizations when he or she performs an action, users are subject to authorization checks.
Authorization : An authorization enables you to perform a particular activity in the SAP System, based on a set of authorization object field values.
You program the authorization check using the ABAP statement AUTHORITY-CHECK.
AUTHORITY-CHECK OBJECT 'S_TRVL_BKS'
ID 'ACTVT' FIELD '02'
ID 'CUSTTYPE' FIELD 'B'.
IF SY-SUBRC <> 0.
MESSAGE E...
ENDIF.
'S_TRVL_BKS' is a auth. object
ID 'ACTVT' FIELD '02' in place 2 you can put 1,2, 3 for change create or display.
The AUTHORITY-CHECK checks whether a user has the appropriate authorization to execute a particular activity.
This Authorization concept is somewhat linked with BASIS people.
As a developer you may not have access to access to SU21 Transaction where you have to define, authorizations, Objects and for nthat object you assign fields and values. Another Tcode is PFCG where you can assign these authrization objects and TCodes for a profile and that profile in turn attached to a particular user.
Take the help of the basis Guy and create and use.
Regards
Anji

"Setup encountered a problem while validating the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run se

Team,
I am trying to Install Exchange on my Lab, getting below error
message.
The Schema Role is installed on Root Domain and trying to install
exchange on Child domain.
1 Root Domain - 1 Child domain. both are located on single site.
“Setup encountered a problem while validating
the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run setup with the /prepareAD parameter and wait for
replication to complete.”
Followed below articles:
http://support.risualblogs.com/blog/2012/02/21/exchange-2010-sp2-upgrade-issue-exchange-organization-level-objects-have-not-been-created-and-setup-cannot-create-them-because-the-local-computer-is-not-in-the-same-domain-and-site-as-the-sche/
http://www.petenetlive.com/KB/Article/0000793.htm
transferred the schema roles to different server on root domain, still no luck.
can someone please help me.
regards
Srinivasa k
Srinivasa K

Hi Srinivasa,
I guess, you didn't completed the initial setup schemaprep and adprep before starting the installation. You can do it as follows:
1. Open command Prompt as administrator and browse to the root of installation cd and run Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
After finishing this,
2. Setup.exe /PrepareAD /OrganizationName:"<organization name>" /IAcceptExchangeServerLicenseTerms
3. To prepare all domains within the forest run Setup.exe /PrepareAllDomains /IAcceptExchangeServerLicenseTerms. If you want to prepare a specific domain run Setup.exe /PrepareDomain:<FQDN of the domain you want to prepare> /IAcceptExchangeServerLicenseTerms
4. Once you complete all of the 3 steps, install the pre-requisities for Exchange 2013
5. Finally, run the setup program
Hope this will help you
Regards from Visit ExchangeOnline |
Visit WindowsAdmin

How to create authorization in BI 7.0 objects

Dear Friends,
how to create authorization in BI 7.0 objects. Pls any body help. tghjis is morevhelpful for me
Regards
Ramana

give the user name to whom you have to give the authorizations.
maintain user then you can see the roles tab where you can assign the roles for the user.
for these roles you can assign the authorization objects. when you double click on the roles you can get the maintenance of the role where you can edit or give the authorization objects for that role.
some example for the authorization objects are:
S_RS_ADMWB (Datawarehouse workbench-objects), S_RS_IOBJ(Datawarehouse workbench-Infoobject), S_RS_DS(Datawarehouse workbench-Datasoure for release greater than 3.X), S_RS_DTP(Datawarehouse workbench-DTP's) etc
You can edit these authorization objects like providing them display or create or modifying authorizations
Go through the below link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/659fa0a2-0a01-0010-b39c-8f92b19fbfea

MAximum number of authorization fields in an authority object

What is the maximum number of authorization object in an authority object ?

An authorization object comprises up to 10 authorization fields.
Read [AUTHORITY-CHECK|http://help.sap.com/abapdocu_70/en/ABAPAUTHORITY-CHECK.htm], look also at [SU21|http://help.sap.com/abapdocu_70/en/ABENBC_AUTHORITY_CHECK.htm] transaction screen.
Regards,
Raymond

How to create a local object reference variable in teststand sequence file programatically using C#

I want to create a local object reference variable in a TestStand sequence file programatically using C#.

Hi,
Accoring to your reply in this Thread
http://forums.ni.com/ni/board/message?board.id=330&thread.id=26984
Just try this example. There you will create a numeric variable during excuting a sequence!
Hope this is what you are looking for.
Please attach all your questions here.
juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=
Attachments:
CTestStandDialog.zip ‏31 KB

Can not create WebService with java.util.Locale object why?

I am unable to create a WebService which contains a Locale Object in the request. I assume its because the java.util.Locale object is not Serializable. Can anyone tell me if there is a work around for this?

Hi,
Make sure your strings for Locale follow these rules...
The language string should be lower-case, two-letter codes as defined by ISO-639.
http://www.ics.uci.edu/pub/ietf/http/related/iso639.txt
The country string should be upper-case, two-letter codes as defined by ISO-3166.
http://www.chemie.fu-berlin.de/diverse/doc/ISO_3166.html
Or try with some constant Locales like
Locale.CANADA
Locale.US
regards,
Uma

Can I create calculated fields using formscentral on a locally created, fillable PDF form? If so, how?

I am using Acrobat XI Pro to build a fillable PDF form that can be used by customer who have Adobe Reader installed. I would like to create calculated fields, including the summation of two or more currency fields and the product of a currency and number field. The procedure for creating these escapes me. Does anyone have any insight?

Hi Gilad,
thankyou! - yes it seems though I was using the text tool when I had this problem: When I had created a few fields in the 'form edit' mode I then may later have added some normal 'comment' fields of text in the normal mode to highlight certain aspects on a form - I used the text tool thinking that was the right way in to add or edit text - I can now see I double click with the hand tool to still be able to access any text field I want to. Yay!
Many thanks for your kind assistance - I shall try this method later on a new form I was trying to create and which was giving me grief.
One last thing then: what is that default text field that can't be deleted actually for - why is it there? After all, a 'blank pdf' should surely be a truly blank pdf? Perhaps this is one for mighty Adobe....?
Kind Regards,
Pete

P_GROUP Field in S_DEVELP Object?

Hi Experts,
When user needs a S_DEVELOP Object,provides the SU53 with P_Group as <dummy>.We also provides the user with S_Develop with P_GROUP as blank.Even P_GROUP field is blank, user is able to work.Then what is the purpose of P_Group field in S_Develop?
Kindly help me.
When I searched in Internet,I am not able to get enough information about P_GROUP field on S_DEVELOP Object.
Regards,
Karthika

p_group in s_program is used for submitting the report, protecting variant maintenance, scheduling it in a background jobstep, etc. So, it is for using the report.
p_group in s_develop is used for the development environment of the report, such as maintaining text elements, navigation in where-used-lists, changing the report attributes - which include the authorization group itself.
If an auth group has been set via report RSCSAUTH, then it implies an intention to use it for S_PROGRAM control in SA38, SM37, etc. S_DEVELOP works better using packages and object types in my opinion.
If you attempt to change the auth group via SE38, SE80 etc when it has already been set from RSCSAUTH, then the system will warn you. But you can accept the warning and create an inconsistency for a while... rather always use RSCSAUTH for both when making changes.
S_PROGRAM is more usefull for you to use the group in security, but S_DEVELOP is stronger. Please be carefully with all aspects of object S_DEVELOP.
Cheers,
Julius

Getting error while testing "create" operation of a business object!

Hi Experts,
   I have created a composition application. This contains only one business object called Reservation.
   It has a structure containing following fields:
<UL>
   <LI> Key      -- Key field
   <LI>Reservation_No   -- Key field
   <LI>Create_Date
   <LI>Create_Time
   <LI> Status
   <LI>Source
   <LI>createdAt
   <LI>createdBy
   <LI>modifiedAt
   <LI>modifiedBy
   </UL>
   Here following fields are created by system.
<UL>
   <LI>Key
   <LI>createdAt
   <LI>createdBy
   <LI>modifiedAt
   <LI>modifiedBy
</UL>
   The system also created many operations on the business object. Some on them are mentioned below.
<UL>
<LI>create
<LI>delete
<LI>findAll
</UL>
<UL> <LI>I built and deployed the business object. When I test the service and create a new entry in the business object I got the error below:
</LI>
</UL>
<UL> <LI>
<I>Failed to save BusinessObjectNode element: User XXX has no create authorization for object ID </I>
</LI>
</UL>
<UL> <LI>
How do i resolve this?
</LI>
</UL>
Thanks
Gopal
Edited by: gopalkrishna baliga on Aug 12, 2010 1:13 PM
Edited by: gopalkrishna baliga on Aug 12, 2010 1:21 PM

Hi,
Has this issue of yours been resolved?
If yes, Kindly guide us how it was resolved, since we too are facing a similar issue.
Thanks
Rajeev Parmar

How to append contents of a local object to dynamic internal table ?

Dear ABAP-Specialists,
i am trying to append contents of a local object to a dynamic table. The most relevant lines are the ones written in bold
I guess the append is the problem due to the reason that a unknown format has to be assigned to a fixed format somehow.
+METHOD wddomodifyview .+
+DATA lo_ui_root                TYPE REF TO if_wd_view_element.+
+DATA lo_container              TYPE REF TO cl_wd_uielement_container.+
+DATA lo_table                  TYPE REF TO cl_wd_table.+
+DATA lo_table_column           TYPE REF TO cl_wd_table_column.+
+DATA lv_tabname                TYPE         tabname.+
+DATA lt_output                 TYPE TABLE OF sychar512.+
+DATA lo_data TYPE REF TO data.+
+DATA:+
    +lo_node_output_data                    TYPE REF TO if_wd_context_node,+
    +lo_node_table_list                     TYPE REF TO if_wd_context_node,+
    +lo_node_differences                    TYPE REF TO if_wd_context_node,+
    +lo_node_output                         TYPE REF TO if_wd_context_node,+
    +lt_all_elem_differences                TYPE        wdr_context_element_set,+
    +lo_elem_table_list                     TYPE REF TO if_wd_context_element,+
    +lo_elem_differences                    TYPE REF TO if_wd_context_element,+
    +ls_differences                         TYPE        if_table_differences=>element_differences,+
    +lt_differences                         TYPE STANDARD TABLE OF if_table_differences=>element_differences.+
+FIELD-SYMBOLS:+
                 +<ls_output> TYPE ANY,+
                 +<lt_output> TYPE ANY TABLE.+
+     ....+
    +*CREATE DATA lo_data TYPE TABLE OF (lv_tabname).*+
    +*ASSIGN lo_data->* TO <lt_output>.*+
    +*LOOP AT lt_differences INTO ls_differences.*+
+**      APPEND ls_differences-ct_line TO lo_data->*.*+
    +*ENDLOOP.*     ....+
+ENDMETHOD.+
Thanks a lot in advance for your Ideas.
Best regards
Carsten Klatt
Please post in the correct forum and use code tags to format your code
Edited by: Rob Burbank on Oct 1, 2010 1:27 PM

This might help - you should not reference the data reference directly:
DATA: lt_t001 TYPE TABLE OF t001,
      ls_t001 TYPE t001.
DATA: lr_dref    TYPE REF TO data.
DATA: lv_tabname TYPE tabname.
FIELD-SYMBOLS: <lfs>      TYPE table,
               <lfs_line> TYPE ANY.
lv_tabname = 'T001'.
TRY.
    CREATE DATA lr_dref TYPE TABLE OF (lv_tabname).
    ASSIGN lr_dref->* TO <lfs>.
CATCH cx_sy_create_data_error.
*     Do something
ENDTRY.
SELECT * FROM t001 INTO TABLE lt_t001.
LOOP AT lt_t001 INTO ls_t001.
ASSIGN ls_t001 TO <lfs_line>.
APPEND <lfs_line> TO <lfs>.
ENDLOOP.

Creating Authorization Field as Local Object

Similar Messages

Maybe you are looking for