Creating Business event in training and event management

Hi Gurus!!!,
can you please instruct me the steps involved in creating business events in Training and Event Management.(HR Module)
Thanks and regards,
Prosper

Hi Prosper,
You need to configure lot of settings, prior to Business Event, because one BE is based on various elements like Location, Attendee type, Instructor, Fees, Resources, Time Schedule, Services, BE type, BE Group.
After configuring all these for BE type, you need to create a BE for the BE type. Then, you can go for day to day activities like Booking, Pre Booking, Cancellation.
I hope, this link will help you
http://help.sap.com/saphelp_47x200/helpdata/en/26/865738c185f50ce10000009b38f8cf/frameset.htm
Good Luck
Om
Reward it, if u feel helpful.

Similar Messages

How to create custom infotype for training and event management

hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzal

Hi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini

Create an infotype for Training and Events

Hello SAP HCM Community,
Does anyone have a step-by-step procedure on how to create an infotype for Training and Events (specifically for External Persons - H)?
I also need to find out how do I edit an existing Training and Events or PD infotype, i.e. to add fields or remove them?
Kind regards
Dorianne

Hi Dilek,
Firstly before I give you the example please advise if IT1690 is a SAP standard infotype?
Example:
When creating a Business Event (E) via transaction PSV2, PV10 or PV11 I want certain rules to be in place when the user selects the following:
When selecting an option under 'Location' for example "Internal", the user will then go to "Organizer Data". Under "Organizer Data" there will be a drop down list of A, B or C. For "Internal" Location the user should only pick option B, so if they select any of the other options and attempt to save the transaction will be stopped with an error with a message, i.e. " Incorrect Organiser Data Captured for Internal".
I look forward to your response.
Kind regards
Dorianne

HowTo create IT2002 from a training and event managed course?

Hi there,
I have been digging the way to automatically create the IT2002 for an employee following a course (managed through the training and events module)
I cannot still find when the IT gets created.
I setup the system to enable integration, setup events type, create the event, book the employee, fix the event, and even add qualifications, but still the IT does not get created.
Is there any report I need to run in order for the system to recognize the event participation and therefore create the presence on IT2002?
I have read on some threads that the IT gets created when you firmly book the employee for the event but it does not work for me. Should it work this way?
Thank you very much for any input.
BR

If you mean by dynamic action the actions you get automatically performed after a PA infotype update, it is not what I am looking for.
What I need to know is how I setup the Training and event module to automatically create the IT2002. No other PA infotype is required.
Let me know if you mean something different.
Thanks for the reply
Message was edited by:
Miguel Guardo

Business Event Brochure in Training and Event Management?

Hi Guru's
My client has a requirement as follows. The training administrator decides the Business Event Types which for which superiors can book their subordinates or not. Those events are stored at a particular place. Once the administrator stores them, a mail should be triggered to all the superiors. Thus superior can have a list of event types for which he can book his subordinates. When he books for such events, a mail should be triggered to his subordinates regarding the training event. If an employee books for an event, a mail should be triggered to his superior for approval.
How is this possible? According to me, those events will be "Included in Brochure" (in Business Event Type Infotype). Am I right?
Please suggest me.
Points assured!
Thanks in advance.

Hello ,
see the links it might help :
Business processes of Training and Event Managment
Training and Event Management
Lots of workflow

Training and Event Management - internal instructor

Hi people,
I am working on R/3 4.7 Ext 110 HR module. While creating a training event in Training and Event Management, I need to include the name of the internal instructor (not external). Where exactly do I do this? I do not find this option in PV10. Kindly help.
Thank you.

Hello Phoebe,
For this, first you need to maintain the Relationship A 022 (Requires) for the Business Event using the Tcode OOET with the Resource Type (Instructor).
Then use the Tcode PV10 and select data screen for the Business Event. Then make the necessary entries on the screen and then select Resource Selection on the left top of the screen. After this the new screen will pop-up of all the resource type with which u maintained the relation. Select instructor from there and click on the select resource in the left side. Again a new window will appear and select Temporarily Add Resource from there.
Hope this will help you, try and let me know.
Thanks & Regards,
Esha

Training and event management - create new type of attendee

Hi all,
For training and event management, I have to create a new type of attendee besides sap existing attendee type such as company, contact person, customer, external person and so on.
Via IMG -> Training and event management -> basic settings -> object type modeling enhancement -> object type -> define object types, then how can I define OrgObj Type for new object type I want to create?
Thanks & regards,
WCC

S_AHR_61016216 - Cancellations per Attendee , i think there is no standard report for cencelation of business events, type and group.
for cancellations per attendee reports is available in the system.
good luck
Devi

Can we create a dynamic action for Training and Event Management???

Hi All
i need to configure automatic email generation for an employee when he gets booked for a training program in the training and event management module. can we use a dynamic action for it? and how to configure it?? I also guess that i have to use the Feature MAILS for it. but i am not sure abt it and also not sure how to configure it. I will really appreciate if someone can provide me with a step to step configuration for the same. Its urgently sought.
Thanks and Regards

Notifications in T&E are done through Workflow.Dynamic Actions are only for PA Infotypes.
~Suresh

HR-Training and Event Management -Standard business Objects

Hi
Can any body let me know,what are all the Standard
1.Data Dource.
2.Cube.
3.Transformation...
4.Infopackage
5.DTP
available for HR-Training and Event Management Module.
Thanks in Advance.
Regards,
MRC.

Hi,
Look at this link:
http://help.sap.com/bp_biv133/html/bw.htm
Thanks,
Ajay

PMS and Training and Event Management

Hi Gurus,
Our one the of the client implementing PMS and Training and Event Management.
Could anyone suggest me what are the questions need to be asked in initial meeting with the client.
and if anyone has configuration documents on PMS and Training and Event management please forward to me,
my id would be [email protected]
Regards,
Rajesh Soma

The prerequisites of PMS is OM and PA is mandatory,
PMS is just like an interaction between the manager and the employees in an enterprise, based
On his work they are going to put some rating etc.
In the standard system employee called as “Appraise” Manager called as an “Appraiser” and Manager’s Manager called as Higher level manager “Part Appraiser “ can be a self-peer & customer they can save & provide their Comments to the “Appraiser”
First you take the requirement form client side what are the process and how Appraisal system in client then you have to prepare one sheet like Preparation ,Planning,Process
for business functions and other check below :-
HCM, Performance Management (Flexible) 01 - SAP Documentation
HCM, Performance Management (Predefined) 03 - SAP Documentation
check below once :-
Tcodes for PMS Basic Setting
OOHAP_BASIC      Basic Appraisal Template Settings
OOHAP_CATEGORY      Appraisal Category Settings
OOHAP_CAT_GROUP Category Group Settings
OOHAP_SETTINGS_PA PA: Settings
OOHAP_VALUE_TYPE Standard Value Lists
T codes for PMS Process
PHAP_ADMIN     Administrator - Appraisal Document
PHAP_CATALOG     Appraisal Template Catalog
PHAP_CHANGE     Change Appraisal Document
PHAP_CREATE     Create Appraisal
PHAP_PREPARE     Prepare Appraisal Documents
PHAP_SEARCH     Evaluate Appraisal Document
start your work with above things any other post here again ......

Appraisals & training and event management problem

Hi gurus.
I'm trying to configured the integration between Appraisal and Training & Event management (Appraising a Business Event and Attendee Appraisal
I set an attribute HAP00 REPLA = A .
But two problems occurred.
1.
The definition of Appraisal catalog for employees is no problem. But I have a problem with definition of Appraisal catalog for Business event and for Attendees.
Through the definition of Appraisal catalog via SPRO (Training and Event Management/Recurring Activities/Appraisals/Edit Appraisals Catalog) its possible to create an appraisal templates only for employees (it looks like that, because there is only Category group Personnel Appraisals and its not possible to add new category for example Attendee Appraisal).
Can somebody help me where I can define appraisal templates for Event management or how can I get the Appraisal catalog category groups - Appraising a Business Event and Attendee Appraisal?
2.
I set the attributes SEMIN EVAEV/EVAPA to the values 2/3 in connection with table T77BF.
When I run tcode PV33 or PV34 the matchcode of appraisal templates contains the list of all object type VA. The problem is that when I run tcode PV33 I dont want to see all appraisal templates, but only for appraising a Business Event.
It is possible to configure that so? If yes, how.
Thanks in advance.
Regards

Hi,
1. transaction LSO_CATALOG
Regards and Groetjes,
Maurice Hagen

Extraction and loading of Training and Event Management data (0HR_PE_1)

hello,
I've got the following doubt:
before BI 7.0 release, extractor 0HR_PE_1 extracts event data (eventid, attendee id, calday,...) but if you load straight to cube 0PE_C01, as Calendar year/month needs a reference date (for example, event start date), you'll get total duration of event in hours or days refered to event star date.
So in a query filtered by month, you get total duration of an event that starts in the filtered month but it couldn`t end until few months later o year later, so you don´t get appropiate information.
Example:
Event calday Hours
10004377 20081120 500 but from event_attr event end date is 20090410.
In a query filtered by 200811 you get total duration time (500 hours when in 200811 event hours have been 20) or if you filter by any month of 2009 you don´t get information of duration of that event.
I had to create a copy of standar cube (without calday, only Calendar year/month, Calendar year in time dimension) and disaggrate data creating as many entries for an event as months lasts and adjust calculation of ratios duration of event (duration of event in each month/ total duration of event).
The question is: Is there any improvement or change on business content in BI 7.0 to treat Training and Event Management data? Has anybody had to deal with that?
Thank you very much.
IRB

Hi,
TEM data is stored in HRP tables.
You can load the catalog by creating LSMWs for objects Business event group (L), Business event types (D), Locations (F), Organizers (U) as per requirement.
LSMW for tcode PP01 can be used to create these objects.
To create Business Events (E) you can create LSMW for PV10/PV11.
To book attendee create LSMW for tcode PV08 as here you can specify the actual business event ID which reduces ambiguity.
tcode PV12 to firmly book events
tcode PV15 to follow up
Hope this helps.
Regards,
Shreyasi.

Email on Training and Event Management

Dear all,
I would like to know are there any email supported in Training and Event Management Module.
For example, after HR administrator help book courses for staff, system will trigger an email notification to staff mailbox with certain course detail information
Regards
Bill

Hi Bill,
In your case the event for triggering the email notifications will be when the booking is done. So before booking, for the object like Business event type and/or business event group some relationship exits. Once you do a booking of course, additional relationship will be created in different objects. Not exactly sure about the relationship code, but you can easily find out from hrp1001.
So yoor program will check for this partcular relationship, and if it exists then will send mail notifications.
Thanks!
Regards,
Chetan Shriraj Wahane

Training and Event Management Data Load

Hello Team
Would appreciate if any of you can advice on how to load Training and Event management data. I think its stored in HRP tables.
I'm working on an upgrade assignment.
Thanks

Hi,
TEM data is stored in HRP tables.
You can load the catalog by creating LSMWs for objects Business event group (L), Business event types (D), Locations (F), Organizers (U) as per requirement.
LSMW for tcode PP01 can be used to create these objects.
To create Business Events (E) you can create LSMW for PV10/PV11.
To book attendee create LSMW for tcode PV08 as here you can specify the actual business event ID which reduces ambiguity.
tcode PV12 to firmly book events
tcode PV15 to follow up
Hope this helps.
Regards,
Shreyasi.

TRAINING AND EVENT MANAGEMENT - ERROR

Dear SAP Experts,
I am working on the module TRAINING AND EVENT MANAGEMENT.
While using transaction PSV2 - DYNAMIC BUSINESS EVENT MENU, when i click on BUSINESS EVENT TYPE in that create W/O RESOURCES, I get an error.
PLANNING PERIOD IS NOT IN BUSINESS EVENT TYPE INTERVAL.
Can you please guide me in this.
Please tell me where i am going wrong
Thanks in advance.
Regards
Aniruddha

Hi all,
PLANNING PERIOD IS NOT IN BUSINESS EVENT TYPE INTERVAL (on LSO_PSV2)
I have the same error ...
Does anyone know?
thanks in advance, Sony

Creating Business event in training and event management

Similar Messages

Maybe you are looking for