Creating Custom fields (data type QUAN) using EEWB

Hi all
I tried to create two customised fields using EEWB for CRM Opportunity:
1. Projected Volume (data type 'QUAN', length 13, 3 decimal places)
2. Projected Unit (data type 'UNIT')
In the SAP-generated tables, I have set the reference table field for 'Projected Volume' to point to 'Projected Unit'. However, I encountered errors that is related to Table Buffering and Restricted Transport for the Projected Volume field.
If I were to change the data type to 'NUMC', field generation is ok. Does anyone know to resolve this issue? I need the Projected Volume field to be of data type 'QUAN' since decimal place is required.
Thanks for your advice!

SAP Note 746227 has addressed this issue. I will close this question.

Similar Messages

New Effective CAL essay: How do I create an abstract data type in CAL?

How do I create an abstract data type in CAL? An abstract data type is one whose internal representation can be changed without needing to modify the source code of client modules that make use of that type. For software maintainability, it is a good idea to make a type that is subject to change or enhancement into an abstract data type. Another reason to create an abstract data type is to enforce invariants for values of the type that can only be ensured by using constructor functions (i.e. functions that return values of that type). In principle it is simple to create an abstract data type in CAL. For an algebraic data type, make the type constructor public and all data constructors private. For a foreign data type, make the type constructor public and the implementation scope private. If a scope qualifier is omitted, the scope is taken to be private. For example, the Map algebraic data type has the public type constructor Map and the data constructors Tip and Bin are each private, so it is an abstract data type. /** A map from keys (of type {@code k@}) to values (of type {@code a@}). */ data public Map k a = private Tip | private Bin size :: !Int key :: !k value :: a leftMap :: !(Map k a) rightMap :: !(Map k a); There are a number of invariants of this type: the size field represents the number of elements in the map represented by its Bin value. The keys in leftMap are all less than key, which in turn is less than all the keys in rightMap. In particular, non-empty Map values can only be created if the key parameter type is a member of the Ord type class. Values of the Map type can be created outside the Cal.Collections.Map module only by using constructor functions such as insert: insert :: Ord k => k -> a -> Map k a -> Map k a; public insert !key value !map = ... The owner of the Cal.Collections.Map module must ensure that all invariants of the Map type are satisfied, but if this is done, then it will automatically hold for clients using this function. Some examples of foreign abstract data types are Color, StringNoCase and RelativeDate: data foreign unsafe import jvm private "java.awt.Color" public Color; data foreign unsafe import jvm private "java.lang.String" public StringNoCase; data foreign unsafe import jvm private "int" public RelativeDate; The private implementation scope for Color means that a foreign function whose type involves Color can only be declared in the Cal.Graphics.Color module where the Color type is defined. A foreign function declaration involving the Color type relies on the compiler knowing that the Color type corresponds to java.awt.Color to resolve the corresponding Java entity i.e. it must know about the implementation of the Color type. Having a private implementation scope means that the Color type can be changed to correspond to a different Java class, or indeed to be an algebraic type, without the risk of breaking client code. In all these three cases there are useful, and different, design reasons to adopt a private implementation scope: For RelativeDate, the Java implementation type int represents a coded Gregorian date value in the date scheme used by Crystal Reports. Not all int values correspond to valid dates, and the algorithm to map an int to a year/month/day equivalent is fairly complicated, taking into account things like Gregorian calendar reform. Thus, it is desirable to hide the implementation of this type. For StringNoCase, the implementation is more straightforward as a java.lang.String. The reason to adopt a private implementation scope is to ensure that all functions involving StringNoCase preserve the semantics of StringNoCase as representing a case-insensitive string value. Otherwise it is very easy for clients to declare a function such as: foreign unsafe import jvm "method replace" replaceChar :: StringNoCase -> Char -> Char -> StringNoCase; which does not handle case-insensitivity correctly, but is a perfectly valid declaration. This declaration results in a compilation error when it is placed outside the module in which StringNoCase is defined because of the private implementation scope of StringNoCase. For Color, the issue is somewhat more subtle. The java.awt.Color implementation type is semantically the same as the CAL Color type. The problem is that java.awt.Color is mutable (since it can be sub-classed to create a mutable type). It is preferable for a first-class CAL type to not be mutable, so we simply make the implementation scope private to ensure that this will be the case. A somewhat less encapsulated kind of abstract data type can be created using friend modules and protected scope. For example, if an algebraic type is public, and all its data constructors are protected, then the data constructors can be accessed in the friend modules of the module in which the type is defined. Effectively this means that the implementation of the semantics of the type stretches over the module in which the type is defined, and all of its friend modules. These must all be checked if the implementation of the type is modified. Given the merits of abstract data types discussed above, it is perhaps surprising that most of the core types defined in the Prelude module are not abstract data types. For example: Boolean, Char, Int, Double, String, List, Maybe, Either, Ordering, JObject, JList, and all record and tuple types are non-abstract types. There are different reasons for this, depending on the particular type involved. For example, Boolean, List, Maybe, Either and Ordering are all rather canonical algebraic data types with a long history in functional languages, with many standard functions using them. They are thus guaranteed never to change. In addition, their values have no particular design invariants that need to be enforced via constructor functions. Exposing the data constructors gives clients some additional syntactic flexibility in using values of the type. For example, they can pattern match on the values using case expressions or let patterns. Essentially the same explanation holds for record and tuple types. Although non-tuple record types are less canonical, they do correspond to the fundamental notion of an anonymous named-field product type. The "anonymous" here simply means that the programmer can create an entirely new record type simply by creating a value; the type does not have to be declared anywhere prior to use. Char, Int, Double, String, JObject and JList are foreign types where in fact part of the semantics of the type is that we want clients to know that the type is a foreign type. For example, we want clients to know that Prelude.Int is essentially the Java primitive unboxed int type, and has all the semantics you would expect of the Java int type i.e. this is quite different from RelativeDate which is using int as its implementation type in a very tactical way that we may choose to change. One can think of a public foreign type declaration with public implementation scope as simply introducing the Java type into the CAL namespace. One interesting point here is with CAL's naming convention for public foreign types. We prefix a type name by "J" (for "Java") for foreign types with public implementation type such that the underlying Java type is mutable. This is intended as mnemonic that the type is not a pure functional type and thus some caution needs to be taken when using it. For example, Prelude.JObject has public Java implementation type java.lang.Object. In the case where the underlying Java type is not mutable, we do not use the prefix, since even though the type is foreign; it is basically a first class functional type and can be freely used without concern. For example, Prelude.String has public Java implementation type java.lang.String. In the case where the implementation type is private, then the fact that the type is a foreign type, whether mutable or not, is an implementation detail and we do not hint at that detail via the name. Thus Color.Color has as its private Java implementation type the mutable Java type java.awt.Color. When creating abstract data types it is important to not inadvertently supply public API functions that conflict with the desired public semantics of the type. For example, if the type is publicly a pure-functional (i.e. immutable) type such as Color, it is important not to expose functions that mutate the internal Java representation. A more subtle case of inadvertently exposing the implementation of a type can occur with derived instances. For example, deriving the Prelude.Outputable and Prelude.Inputable type classes on a foreign type, whose implementation type is a mutable Java reference type, allows the client to gain access to the underlying Java value and mutate it
(by calling Prelude.output, mutating, and then calling Prelude.input). The solution in this case is to not derive Inputable and Outputable instances, but rather to define a custom Inputable and Outputable instance that copies the underlying values.

Hi Pandra801,
When you create a the external content type, please try to add a filter based on your select statement.
http://arsalkhatri.wordpress.com/2012/01/07/external-list-with-bcs-search-filters-finders/
Or, try to create a stored procedure based on your select statement, then create ECT using the SQL stored procedure.
A step by step guide in designing BCS entities by using a SQL stored procedure
http://blogs.msdn.com/b/sharepointdev/archive/2011/02/10/173-a-step-by-step-guide-in-designing-bcs-entities-by-using-a-sql-stored-procedure.aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

LSMW : Idoc method , Business Activities custom fields data upload

Hi guys
I am uploading Business activities using LSMW IDOC method and below message and idoc type
Message type CRMXIF_ORDER_SAVE_M
Basic idoc type : CRMXIF_ORDER_SAVE_M02
Using EEWB I added few fields to business activities , along with the standard fields I want to upload the customer fields also .
I tried to Extend the Basic idoc type CRMXIF_ORDER_SAVE_M02, but it was not allowing me to Extend ( since it is generated basic idoc type ) I tried the other Basic idoc types for Business activities , I got the same problem
the basic idoc type contains only two Segments
E101CRMXIF_CUSTOMER_H_X (parent)
E101CRMXIF_CUSTOMER_H (child)
with out my custom fields
pls help how can i add my custom fields ( added by eewb) to the basic idoc type
for uploading custom fields
thanks in advance
Warm regards
Rajasekhar

You are going to need to create an enhancement of the standard IDOC type in order to get your custom fields to show. I can't remember the exact procedure, but you will need to create a Z-type based on the existing type in the system. When you generate the z-type the fields will be filled in.
Look at the following thread and it will give the basic steps
How to delete Extention
Good luck,
Stephen

Creating Custom fields which are sales org dependent in Accounts Master

Hello Experts,
I want to create new custom fields in Accounts Master for sales and shipping.The component being used is BP_SALES.However when I try to create custom fields through AET, the new fields are added in the BUILHEADER context node.The problem with this is, its making the fields Sales Org independent.
I want to add the fields which are sales org dependent( i.e. want to add the fields for the context nodes BUILSHIPPINGTERMS and BUILSALESARRANGEMENT).
Please help me in this regards,
Thanks and Regards,
Rahim
Edited by: Abdul Rahim on Dec 27, 2010 9:55 AM

Hi Rahim,
in general extension fields for Business Partner are only supported for the header fields (Table BUT000). Therefore the AET does not offer this.
Table extension for BP sales data is supported by the AET beginning from CRM 7.0 eHP1. If you have this you can just create a 1:1 table enhancements and should be happy. If not I'm afraid that you would have to implement this manually.
Using the Easy Enhancement Workbench (EEW) it would only be possible to create table extensions for the header and for relation ship but not for sales data.
Regards Matthias

Get the custom fields data at the time of save

Hi,
We have added few fields in the ICWC for the complaint screen.
At the time of save i am trigering a BADI.
I would like to check the data that is entered in those fields of complaint screen.
Is there any FM which can be used to get the data from the buffer ?
I have the header GUID available to me .
Thanks.
R

Hi,
Let me elaborate a bit.
Users would create the complaints in the ICWC.We have addeded few custom fields in the complaint screen.
CRMT_CUSTOMER_H_WRKT is extended with the custom fields.
At the save i am trigerring the Partner Determination BAdi.
Here i have the complaint guid at run time.
I would like to check the data entered in the custom field in the complaint screen. Based on this i would like to determine one more partner.
My question is how can i get the custom field data in the complaint screen in this BAdi.
The FM: CRM_ORDER_READ is not returning this data.Is there any FM to get this ?
Thanks.
R.

VBA - Setting Custom Fields For Sub-Projects Using a Master File

Hello,
I was wondering if anyone had any experience or could provide some help with a Macro to set the Custom Fields in Sub-Project Files directly from the Macro. I had this macro working in the past with Project 2007, but it has been a couple years and I am struggling
to resolve an error. I am currently running Project 2010 with SP2. I intend to use this Macro in our Server 2010 environment, however at this time, I'm testing locally on my desktop.
Scenario.
I have a Master File with 2 sub-project (Project A, and Project B) inserted. While working in the Master File, I create a custom field title "TEAM Lookup". While in the Master File and without having to individually go and open, edit, save, and
close each sub-project, push the custom field down to the project files.
ERROR: Currently, the Macro will run and I can step through the lines of code until line 12 where I'm asking Project to use the organizer to shift the newly created custom field from the Master File to a sub-project. The line appears to
populate correctly, but instead of continuing through the loop, an error is caught (ID - 1101 - "The File (Master File) was not found")
Any ideas or suggestions would be greatly appreciated. Thanks
Sample Code
1. Sub CopyCustomFieldToSubprojects()
2. Dim MASTER, custfield, contin, AllDone
3. Dim SubProj As Subproject
4. Alerts False
5. MASTER = ActiveProject.Name
6. Application.EnableCancelKey = pjInterrupt
7. custfield = CustomFieldGetName(ActiveCell.FieldID) & ActiveCell.FieldName
8. On Error GoTo errhand
9. contin = MsgBox("This macro will copy the field " & "(" & custfield & ")" & " (the currently selected field) to all subprojects in this consolidated schedule." & vbCrLf & vbCrLf & "Be
patient, it may take more than 70 seconds to run. You will be notified when it's done. Continue?", vbOKCancel)
10.    If contin = vbCancel Then GoTo done
11.    For Each SubProj In ActiveProject.Subprojects
12.    OrganizerMoveItem Type:=pjFields, FileName:=MASTER, ToFileName:=SubProj.SourceProject.Name, Name:=custfield
13.    Next SubProj
14.     AllDone = MsgBox("The " & custfield & " field has been copied to all subprojects.", vbOKOnly)
15. GoTo done
16. errhand:
17. ret = err.Description
18. ret1 = err.Number
19. done:
20. End Sub

SGBlaine,
Project VBA can get rather fussy about some things so you just have to find out what it wants and then adjust your code accordingly. The following will work:
Note the tweaks to the custfield variable and to the MASTER and source project names. Also when working with strings in VBA it is a good idea to eliminate at least one little gotcha, the need for exact capitalization. Therefore I always add the Option Compare
Text statement. In your macro it won't make any difference since you do not directly create a string value, but it's good practice to have the option.
Option Compare Text
Sub CopyCustomFieldToSubprojects()
Dim MASTER, custfield, contin, AllDone
Dim SubProj As Subproject
Alerts False
MASTER = ActiveProject.FullName 'FullName includes the path, now it can find it
Application.EnableCancelKey = pjInterrupt
custfield = CustomFieldGetName(ActiveCell.FieldID) & " (" & ActiveCell.FieldName & ")"
'strings are very fussy, it has to be exact
On Error GoTo errhand
contin = MsgBox("This macro will copy the field " & "(" & custfield & ")" & " (the currently selected field) to all subprojects in this consolidated schedule." & vbCrLf & vbCrLf & "Be
patient, it may take more than 70 seconds to run. You will be notified when it's done. Continue?", vbOKCancel)
If contin = vbCancel Then GoTo done
For Each SubProj In ActiveProject.Subprojects
OrganizerMoveItem Type:=pjFields, FileName:=MASTER, ToFileName:=SubProj.SourceProject.FullName, Name:=custfield
Next SubProj
AllDone = MsgBox("The " & custfield & " field has been copied to all subprojects.", vbOKOnly)
GoTo done
errhand:
ret = Err.Description
ret1 = Err.Number
done:
End Sub
John

Creating customer fields in VA01/Va02 transaction in additonal tab 2

hi,
I have to create Customer fields in the item level to va01 / va02 transaction in additional tab 2 subscreen.
Include MV45AFZZ is used for validation. help needed for adding customer fields. thanks in advance.

The program SAPMV45A screen 8309 is the Additional Data B tab provided by SAP to add your custom fields . In order to capture the data from your custom fields you can use the user exit MV45AFZZ, USEREXIT_SAVE_DOCUMENT_PREPARE OR
USEREXIT_SAVE_DOCUMENT depening on your functionality.
You need to append the fields in VBAP. Then use the screen painter to add the fields in the screen.
Thanks
Vinod

Updating custom field bill type in standard table ERCH

Hi All,
I need to update the custom field bill type in table ERCH depending upon the bill transaction( if bill transaction is periodic,bill type will be updated as P and so on for other cases)
I am implementing a BADI ISU_DEF_BILL_PERIOD and i have used case statements(when abrvorg is P,bill type is P). While debugging i saw that the importing parameter bill document is generated but if i enter the same bill document number at that point in time in table ERCH, it shows no entries found. Thus sy-subrc is retrieved as not zero and hence the custom field bill type does not get updated.
I would like to know how do i go about this requirement since it seems that the bill document entry is made in table ERCH outside this BADI.I used x_new_billing_doc-erch-zbill_type = 'P' in the code but it says that it cannot be changed. Any structure which can be used to be filled here?
Thanks,
Shreeraj

Sheeraj,
You're using a wrong enhancement for your requirement. ISU_DEF_BILL_PERIOD is used to specify billing key date of a billing or print document depending on your requirements,.
SAP provides enhancement EBIA0001 for any custom enhancements to billing document. You can update the custom fields in the billing document before the document is updated.
Best,
Sai

Custom Field is not updating using MM17 ( Mass Material Maintenance )

Dear All,
      I have created 1 custom field in MRP1 view of MM01 tranction & that field saved into MARC table. It is working fine & I am able to change also that field using tranction code MM02. But Problem is that I want to change that custom field of material master using tranction code MM17 , which is for mass Material Maintenance. So to edit custom field of material master from MM17 what I need to do? Please suggest...
Regards
Pradip Pawar

Hi,
Follow the below procedure,
1. In table MARC custom fields need to be add using append structure. For that need to create data elements & domain for      corrosponding fields.
2.In SE51 need to copy standard program SAPLMGD1 & screen 2481( In your case screen would be different ) in to Z program.
3.Now in to the layout of Z program need to add custom fieldu2019s which we defined using append structure in MARC table.
4.Need to add Field statment for the new custom fieldu2019s into the PAI Flow logic of Z program inside CHAIN...ENDCHAIN statement.
5.Need to run transaction OMT3B and then copy screen sequence no. 21 into our Z screen sequence say Z1.
6.Once screen sequence is copied into screen sequence Z1. select sequence Z1 and double click on data screen folder.Select screen sequence with description MRP1 and after selecting it double click on Folder 'Subscreen ' and change the program given for screen no 2481 with our Z program name and Save.
Imp Note - Refer SAP Note no. 44410.
Regards,
Pradip Pawar

Unicode - "DMBTR" must be a character-type field (data type C,N,D or T)

Greetings Experts!
I am trying to convert legacy code to Unicode for a current ERP6.0 reinstallation and have encountered the syntax error "DMBTR" must be a character-type field (data type C,N,D or T)
The field is part of a structure and the fields attributes are as follows:
COMPONENT = DMBTR
COMPONENT TYPE = DMBTR
DATA TYPE = CURR
LENGTH = 13
DECIMALS = 2
DESCRIPTION = Amount in Local Currency
The code in question is as follows:-
macro Move_Zoned.
Converts a numeric variable to zoned format and moves it to a
target variable.
DEFINE move_zoned.
 &1 - source variable
 &2 - Number of Decimal Places
 &3 - 'To'
 &4 - Target Variable.
write &1 to w_zoned no-grouping decimals &2.
condense w_zoned.
 Remove the Decimal Points.
search w_zoned for '...'.
while sy-subrc = 0.
 move sy-fdpos to w_to_point.
 if w_to_point = 0.
 w_to_point = 1.
 endif.
 compute w_from_point = sy-fdpos + 1.
 concatenate w_zoned+0(w_to_point)
 w_zoned+w_from_point
 into w_zoned.
 search w_zoned for '...'.
endwhile.
shift w_zoned right deleting trailing space.
translate w_zoned using ' 0'.
call function 'Z_TRANSLATE_ZONED_DECIMALS'
 exporting
 i_input = w_zoned
 importing
 i_output = w_zoned
 exceptions
 x_invalid_zoned_char = c_invalid_zoned_char
 x_numeric_info_lost = c_numeric_info_lost
 others = c_other_zoned_error.
 Get the length of the recipient field so we don't truncate the
 numbers....
describe field &4 length w_flength in character mode.
describe field &4 type w_type.
describe field w_zoned length w_zoned_len in character mode.
if w_zoned_len <= w_flength.
 move w_zoned to &4.
 shift &4 right deleting trailing space.
 translate &4 using ' 0'.
else.
 Get the start position....
 If it's a packed field allow for values up to 6 figures
 compute w_zoned_len = w_zoned_len - w_flength.
 if w_type = 'P'.
 subtract 2 from w_zoned_len.
 clear w_type.
 endif.
 move w_zoned+w_zoned_len &3 &4.
endif.
END-OF-DEFINITION. "Move_zoned
LOOP AT t_single_kunnr.
 move_zoned t_single_kunnr-postamt 2
 to t_single_kunnr-dmbtr.
 DIVIDE t_single_kunnr-dmbtr BY 100.
 MODIFY t_single_kunnr.
ENDLOOP.
Is there a solution to get past this syntax error as I would rather not change the datatype of the field in the structure.
Much Obliged
Elphick.

Type X is not allowed in Unicode. When a field is declared as Type X with Value u201809u2019 or any other value, it can be resolved by using classes.
Before Unicode
 CONSTANTS: c_hex TYPE x VALUE '09'.
Resolution:
Itu2019s work for any value of x.
First a temporary field of Type c should declare. Following class will convert Type x variable into type c.
Example:
CONSTANTS: c_hex TYPE x VALUE '09'.
DATA: LV_TEMP TYPE STRING.
DATA: LV_TMP TYPE C.
TRY.
CALL METHOD CL_ABAP_CONV_IN_CE=>UCCP
EXPORTING
UCCP = c_hex
RECEIVING
CHAR = LV_TMP .
CATCH CX_SY_CONVERSION_CODEPAGE.
CATCH CX_PARAMETER_INVALID_TYPE.
CATCH CX_SY_CODEPAGE_CONVERTER_INIT.
ENDTRY.
CONCATENATE I_OUTPUT-BKTXT I_OUTPUT-BVORG
I_OUTPUT-BUDAT I_OUTPUT-MESSAGE INTO
SEPARATED BY LV_TMP.
I_BUFFER = LV_TEMP.
CLEAR LV_TEMP.
CLEAR LV_TMP.
OR
Note: It works only for type x value 09.
CLASS cl_abap_char_utilities DEFINITION LOAD.
CONSTANTS: c_hex TYPE c VALUE
 abap_char_utilities=>HORIZONTAL_TAB.

Not able to create customer master data with country code US

Hey All,
I am not able to create customer master data in the Transaction Code XD01/FD01 with the country code as US.
The error message for the same is NO JURISDICTION CODE COULD BE DETERMINED. I have checked the tax code settings but could not locate the problem.
Request you to provide me with a solution.
Thanks & Regards
VK

Hey all,
I have checked the field in the account group(OBD2) but its in optional status
and also checked the country settings for US in the transaction code OY17 still the same error message, but when i tried checking the settings for a differnt company code's customer data base i can see that there is a number mentioned in the address tab under tax jurisdiction feild (beside time zone) which is not populating for this company code.
so, do anyone know where exaclty we mention this number so that it populates in that field of address.
hope am clear
hope to receive a solution
thanks & regards
vinila

What data type is used for storing password,

What data type is used for storing pass word in oracle db, i mean if user inputs some thing from forms it should be in Encrypted form in db, please any help??
Thank you
Hina

Data type is VARCHAR2:
SQL> desc dba_users;
Name                                      Null?    Type
USERNAME                                  NOT NULL VARCHAR2(30)
USER_ID                                   NOT NULL NUMBER
PASSWORD                                           VARCHAR2(30)
ACCOUNT_STATUS                            NOT NULL VARCHAR2(32)
LOCK_DATE                                          DATE
EXPIRY_DATE                                        DATE
DEFAULT_TABLESPACE                        NOT NULL VARCHAR2(30)
TEMPORARY_TABLESPACE                      NOT NULL VARCHAR2(30)
CREATED                                   NOT NULL DATE
PROFILE                                   NOT NULL VARCHAR2(30)
INITIAL_RSRC_CONSUMER_GROUP                        VARCHAR2(30)
EXTERNAL_NAME                                      VARCHAR2(4000)
PASSWORD_VERSIONS                                  VARCHAR2(8)
EDITIONS_ENABLED                                   VARCHAR2(1)
AUTHENTICATION_TYPE                                VARCHAR2(8)You can use SQL function ORA_HASH to hash password: http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/functions124.htm#SQLRF06313.

How to create customer master data for walking customer in retail

hi experts !!!!!!
for retail industry e.g books trading industry
how to create customer master data for walking customer in retail
its dummy or one time customer
if i create one time customer then same customer number can i use for every new order and every new customer how ?????
thanks

Dear Hanumant,
As per my view,,
You can use one time customer functionality to full fill your requirement.
When you create sales order with one time customer system take you to the customer data maintanence screen through that you can maintain the one time customer data.
Same one time customer number you can use for every new order through maintaining different data.
I hope this will help you,
Regards,
Murali.
Edited by: Murali Mohan.Tallapaneni on Dec 19, 2008 6:08 AM

How to Create Customer Contact data in SAP CRM

Hi All,
Would want to create Customer Contact data in SAP CRM, could please guide me step by step that how can i create the customer contact data in SAP CRM?
Regards
Avinav

Hello Avinav,
In CRM 6.0 and 7.0 GUI is no more used, you can use WEB UI and login using SALESPRO role to create a contact.
1. Logon to CRM web UI
2. Choose Create Contact from the Navigation bar
3. Enter all the data - Title, first name, last name, account id,
street, stree2, street3, street4, street5, city, postal code, email,
mobile no and website.
4. Press the Save key.
Hope it will help! Please award points in case this helps!
Best Regards
Lata

Custom fields data in mm02/mm03 is not showing

Hi,
My requirement is to add custom fields to mm01 and update the database.but at the same time if i check the material in mm02/mm03 the custom field data also should show.
iam able to update database.my custom fields data is not showing if iam checking in mm02/mm03.
Please help me how can i do this.
Thanks in advance,
Neelima.N

Hi folks,
can u please help me out.
By the following code i can able to display the data in mm02/mm03.but my problem is the last created customer field(model) data is showing for all the materials.
for eg matnr-10 model -xx.
         matnr-20 model-yy.
if iam checking in mm02/mm03 for matnr-10 model-yy it is displaying.in database it is updating correctly.
can u please tell me how can i write a code to select the zfield data for that particular material.
Module get_data.
if sy-tcode = 'MM02'.
    select single model into mara-model from mara
              where matnr is not null.
elseif sy-tcode = 'MM03'.
    select single model into mara-model from mara
              where matnr is not null.
loop at screen.
if screen-name = 'MARA-MODEL'.
   screen-input = 0.
   modify screen.
   ENDIF.
endloop.
endmodule.
Thanks,
Neelu.
Edited by: neelima natta on Feb 26, 2009 2:02 PM

Creating Custom fields (data type QUAN) using EEWB

Similar Messages

Maybe you are looking for