Creating General loans taken in Company Code using Loan Management

Hello Gurus,
I have been trying to find a way to create the configuration for loans taken using the SAP Loans Management module. I still haven't managed to see any configuration guide on the topic. Can someone please help me out with insight on how to go about the configuration for loans taken. I will also need the user guide on how to create loan taken in the SAP system.
Regards,
Chuka

Hello Shannon,
Good to hear that at least there is hope. Secondly, I was wondering if I could find a configuration guide to help in the configuration. This will get me a head start at least so I can be specific on the issues to resolve with the Loans Management expert. Any help or links towards this will be very much appreciated.
Cheers,
Chuka

Similar Messages

  • Creation of New company code using EC01

    Hi
    While creating a new company code using EC01, I am getting several messages relating to Number ranges. All the message relate to number range object type 5 & 6. After all these messages, the final message says that 86 number ranges have not been copied. Can some one throw some light on this?
    Regards
    Ravi

    Hi,
    You can ignore these messages; if you use EC01 the system copies all possible tables that are registered as company-dependent. Some of these tables might be not in use at all.
    Regards,
    Eli

  • Which table stores VAT number entered for a company code using T Code oby6?

    Hi
    Which table stores VAT number entered for a company code using T Code oby6?
    please advice.
    Thanks,
    Vaishnavi

    T001

  • KNB1 - Customer is creating in more than 2 company codes.

    Dear Developers,
    I have a unique isuue related to CRM -> R/3.
    I'm creating a customer in CRM system which  is replicated to R/3.
    while replication, the customer is picking up company code data(KNB1) from the reference customer. Here for the reference customer in R/3 we are maintaining 2 company code (Ex.CCUS & CCCA)
    My objective is to create customer for one company code depending on the sales organisation (KNVV-VKORG)
    Best solution will get reward points...
    Thanks in advance...<b></b><b></b><b></b><b></b>

    Dear Uwe Schieferstein 
    you almost reached my point.
    My client says that he will maintain more than 1 company code for the reference customer. while replication it should pick the appropriate company code from the sales organization.
    for example I'm replicating customer for US (IGUS) it should pick company code (IGUS) from reference customer.
    if I create for India(IGIN) the company code should be (IGIN).
    in the function module SD_CUSTOMER_MAINTAIN_ALL the reference customer comapny code details are fetched from the data base KNB1 and populated to Internal table.
    if the company codes are more than one all the badi's are triggered only once for the 1st loop. i.e., for the first company code. so, this is causing problem to override custom values.
    hope you understood my exact problem...
    please guide me in this regard.
    I promise full points for the successful solution.
    Best Regards,
    Srinivas

  • Can We Two Different Credit Control Area to 1 company code using cross comp

    Can We Two Different Credit Control Area to 1 company code using cross company code assignment.Tried but giving error at the time of bill release.Experts Can you help?

    Hi,
    It is not possible to have more than one credit  control are for a single company code.

  • Timewrite across company codes using SAP CATS.

    Hi Experts,
    Want to know please, Can we timewrite across company codes using SAP CATS.
    Thanks,
    Muhammad

    Hello,
    You surely can.
    When the employee enter his time there will be the respective field to identify the cost center or the one you want to assign.
    If you are using the Worklist, bear in mind to correctly have those codes assigned and I would mention to filter the worklist via CATS0001 user-exit to show only the correct ones (which are relevant for that employee).
    Regards,
    Bentow.

  • How to find company code using sales doc. No

    Hi,
         I need to print company code, how to find company code using sales doc no. I don't find it VBAK.
    Cheers
    Senthil

    Dear Senthil
    You can find in table VBAK itself - Field BUKRS_VF
    thanks
    G. Lakshmipathi

  • How to setup a company code for material management

    Hi,
    While creating material in MM01, in sales org tab, when I gave plant XXXX, it is giving an error "Company code YYYY is not setup for material management".
    So can you help me , how to setup a company code for material management
    Help is appreciated
    thanks
    DIL

    Hello Sendil,
    You can maintain it with trns code OMSY or MMPI/MMPV.
    Hope this helps
    Regards
    Arif Mansuri

  • Two company codes using different chart of accounts

    Dear SAP FI-CO guru's
    There are 2 company code both are using different chart of accounts how we can make consolidation reports  for both  the company codes ?
    thanks in advance
    Regards
    Guru Prasad

    HI,
       use group chart of accounts.
       Create a group chart of accounts
      Give the group chart of accounts no for both the chart of accounts  in OB13
    give the group account number while creating gl account.

  • Cross company code use of equipments

    Hello gurus,
    in our system we have equipment masters for all our machines relevant for maintenance. Up to now, all maintenance operations for the equipments have been documented in PM-notifications and orders.
    Now, our company incorporated a subsidiary company to outsource all the maintenance work.
    This new company has its own company code in our SAP system (lets say 2000) and will act as a contractor for the mother company (company code 1000). Now, we would like to use our existing equipments to create PM- or Customer service orders in company code 2000.
    I have heard rumours that this can be done, but up to now, nobody could explain to me how. If there is no way to do this we would have to create copies for our equipments in company code 2000 and figure out how to document the maintenance in company code 1000.
    Any ideas?
    Cheers
    Alicia

    hi
    From my knowledge , you can create the order in different planning plant ,but every time you have specify the planning plant while creating the order. in this way the cost will be captured at the 2000 company code.
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/5b/ae2ea34b8611d182ba0000e829fbfe/content.htm
    also you can create separate work center for that plant do the billing according to the job performed
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/05/e2eb106f0a11d2a5aa0060087a7a74/content.htm
    Regards
    Thyagarajan

  • Extending to company codes using FSS0

    Hey,
    I do understand that there are many ways to extend a gl account to one or more company codes, but for my client, i need to use only FSS0 transaction to extend the company code. Can anyone guide me in doing so?
    Thanks,
    Aniket

    Hi:
           You are saying that your COA is 0050 and you have created a GL account 777222  in co code 0001 . The error you are mentioning is no Account groups have been created in COA OMB1 which contradicts from your statement that you are using COA 0050 and now in your post error message depicts that account groups have not been created in COA OMB1 please be clear on one point where you want to create GL . If you want to create GL in OMB1 then you will have to create account groups for this COA in OBD4 otherwise simply use 0050 COA in FSS0 to extend GL account to 0002.
    Hope this answers your question.
    Regards

  • Creating PO Automatically ( for different company code)

    Hi All, I have a business requirement wherein i need to create an automatic Purchase Order (in a different company code).
    Lemme explain it..
    1) I have created a sales order using EDI file in company code say xxxx(thru idoc)
    Now the business requirement is ;
    How can i create an automatic PO in the same system but different company code say yyyy..if anyone has come across this scenario please post your tots, if u cud please suggest the possibilities which are logically possible, for sure ur efforts will be appreciated and rewarded..
    Many Thanks

    Hey Martin thanks for making an effort, well i posted here coz i could find in a link where its says "The best practice would be set up a workflow event that is consumed by PUR_ORDER_CREATE_VIA_SD_EVENT . The function is linked to SD event BUS2032 ALECREATED in transaction SWETYPV. ".please find the link below for your reference which has the same business requirement i have..
    http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci983423,00.html
    Awaiting your reply..Thanks

  • SEPA file – how to create one file for multiple company codes

    Dear experts,
    My company has multiple company codes and they process automatic payments (F110) for multiple company codes in the same run.
    The company wants to generate one SEPA file for all company codes.
    In OBPM1  for SEPA format in the section ``Payment medium output devided by level of detail`` I unchecked everything (attached).
    OBPM4 for SEPA format is showing `` No separation of payment medium output``.
    Unfortunately, when I run automatic payments (F110) for multiple codes, multiple files for each company code are created.
    Can anyone let me know how it is possible to create one SEPA file that will contain payments for multiple company codes?
    Thank you

    Hi Zara,
    Please check in transaction DMEE your format tree (eg. SEPA_CT), 'DMEE tree: properties' - tab 'Sort/key field'. Is the Sort/key field 'ZBUKR' defined there with Level 1?
    Please follow the recommendation of note http://service.sap.com/sap/support/notes/1742584
    Regards,
    Emöke

  • Create AlE Relationship between two company code F210 to FN21 (UHP To UPI)

    Hi,
    I want to know how to create ALE realtion ship between two company code ( F210 to FN21(Server name UHP to UPI )  and how to process it?
    Please reply ASAP.
    Regards,
    Achin

    Hi Sathish,
    Thanks for reply!..
    But My question I want to Add ALE relationship between two company code F210 to FN21 (UHP(Production server) To UPI(Third Party System)).
    Regards!
    Achin

  • How to get company code using material number

    Dear all,
              I have material number & plant on selection screen, but how do I get the company code details using MARA-MATNR ?

    HI,
    You can use a cmobination of T001K and MARC Table.
    T001K table is assignment of Plants to a company code and MARC is a table with combination of Material and Plant.
    Regds,
    Anil
    Edited by: Anil Katoch on Jul 23, 2009 6:24 AM

Maybe you are looking for

  • Apps wont install on Iphone 4 OS 6.1

    Everytime I click on a free or $ app, it shows installing, app store asks for my password and I enter it.  It continues as if the password is correct.. in other words it doesn't tell me incorrect password.. I have tried doing that just in case..... I

  • Inheritance class in the system package

    Hi all, when I use a tool such as Java Decompiler to explore the classses in the system package(javax.microedition.lcdui provided with Nokia SDK_v1_1), I see that there are many non-documented methods in the class, e.g, getkeyPressedEvent() in the cl

  • Can't upgrade in Firefox

    Hi there Whatever I do, Firefox won't upgrade to Flash Player 10.2. I've uninstalled FP using the approved Adobe uninstaller. I've rebooted. I've fired up Firefox and gone to Adobe's check site. FP 10.0 is still there. Why? This is about the umpteent

  • Sum of four tables in dynamic form

    There will be a number entered in the last cell of each row which will total at the bottom. I've read and tried numerous ways to total the tables and none work for me. What am I doing wrong?

  • GL Account Field status.

    Hi, Can someone tell me where the GL Master record field status is set. I need transaction code / menu path. Thanks in advance Raghu.