Creating multiple partner function for a sale order @ header level

Hi All,
I have a requirement where in i have to create more than one partner funtion for a sale order @ header level. But the system did not allow this sort of scenario and i got the error,
Partner function ZZ can only occur 1 times in procedure TA (Sales Document Header)
the function module that was giving this error was SD_PCHECK_PARVW_COUNT_OK
here the function module checks if a partner function already exists if so it throws that error. This also updates the VBPA table where partner function is one of the key fields.
Our issue is that we have to allow the system to enable posting 2 or more partner function for the same sale order. It was also verified that the unique key was unchecked during configuration.
is there any other way of over coming this issue as we are updating the standard table. Is it possible??
Thanks a lot in advance for your reply....

I believe this is a configuration setting, based upon the details of your post. Typically, a sales order can have multiple partner functions, but usually the partner type is not duplicated at a single level (header or one item). For example, it would not be logical to have multiple ship-to partners at the header level...these would be unique at the item level, if required.
Speak to your SD functional specialist about the configuration controls for partners, if you must have more than one partner with parvw = ZZ, for the entire order (header level).
Edited by: DaveL on Aug 23, 2011 3:00 PM

Similar Messages

Multiple Partner Functions for a Sales document Item

Hi,
Can you please advise on modeling scenario for showing multiple partner functions for a given sales document in BI Report ..
Because Key figure values should not be distributed for multiple records just becos of multiple partner functions but users want to see them in the reports along with sales doc and key figure
I am explaining bit more clearly...
I can achieve above requirement by having below model ..
SDOC ITEM PF1 PF2 PF3 AMOUNT
1000 10 AB CD EF 50000
PF : Partner Function
but as I feel it is a complicated task to add more and more columns fro partner functions as and when new partner functions have been added or requested to show by users at sales doc level...
So Can you please advise a better solution to meet the same requirement.
Thanks & Regards,
BRK
Please advise me on this scenario
Thanks & Regards,
BRK
Edited by: BRK on Jul 22, 2008 9:19 AM
Edited by: BRK on Jul 22, 2008 9:29 AM

SalesDoc______Item_______PartnerFunction________Amount
80000_________10_____________A1_______________$1000
80000_________10_____________A2_______________$1000
80000_________10_____________A3_______________$1000
This will be the normal display in the cube if there is only one Partner Function.
But what we need is
SalesDoc______Item_______PartnerFunction________Amount
80000_________10_____________A1_______________$1000
80000_________10_____________A2_________________' '
80000_________10_____________A3_________________' '
The Amount (KF) should be populated only for the first record for a SalesDoc / Item combo.
You load data from source to the ODS, say delta.
Suppose that the below record is already available in the ODS.
SalesDoc______Item_______PartnerFunction________Amount
80000_________10_____________A1_______________$1000
And you get the following data as DELTA in the Data_Package from the source.
SalesDoc______Item_______PartnerFunction________Amount
80000_________10_____________A2_______________$1000
80000_________10_____________A3_______________$1000
If you populate the Amount again for these 2 records, then the total would sum to $3000, which is wrong.
So what we do is,
Write a Select stmt for ALL ENTRIES in Data_Package and fetch the records from the target ODS. Have it in an Internal table, say t_ODS1
Take the SalesDoc / Item from the Data_Package and chk if it is present in the internal table t_ODS1.
If it is present, then populate the Amount as ' ' (Blank)
Else populate the Amount as $1000.
Say, you are getting 3 new records, which is not present in the ODS1.
In that case, your internal table t_ODS1 will be blank.
Now again, we need to populate the Amount only for the first record among the 3 records.
So, here comes the "Flag".
Set the Flag as X, when we populate the Amount.
Everytime chk the Flag <> X.
Only if it is <> X, populate the Amount.
Else Leave it Balnk.
Hope I have explained in detail
Regards,
Balaji V

Multiple Partner Function in a sales Order

Hi
I have created a partner function ZR Referred By ( Type Customer) but not able to enter multiple ZR in a sales Order
Error .VPD012. Partner Function can occur only 1 in ..
The requirement is to attach the referred customers for reporting purpose and there can be more than one customer referring this new Customer / Order.

Hi
Thanks for the input but the solutions suggested by you all does not work.
The Unique button is only relevant for Customer Master and not the Order. In the Order you can have only one.
The Button Modifiable is only for allowing you to change a Partner and not adding another partner with the same partner function.
Any way I figured a way out, we can use the system provided AA ( Partner Function) and able to use multiple AAs in a Service Contract./Scheduling agreements.
But if you need to have multiple partner in a sales Order ...Only way seems to be to have Z1, Z2 Etc ...
Thanks

CRM Table for finding Partner Function for a Sales Order

Hello everyone,
I am trying to retrieve Ship-to-Party Customer Number for a particular Transaction (Sales Order) from a SAP CRM table.
In SAP SD we have a table VBPA for the same.
I would like to retrieve the same either from a single table if available or multiple linked tables in SAP CRM.
I tried to link CRMD_ORDERADM_H & CRDM_PARTNER to retrieve the data .. But it dint work.
I am new to CRM .. so Gurus, please share ur insight.
Thanks
Vin

Hi,
Select GUID_SET in table CRMD_LINK where GUID_HI = CRMD_ORDERAMD_H-GUID.
Use the GUID_SET to select data in table CRMD_PARTNER.
Best regards,
Caíque Escaler

Partner Function Structure in Sales Order

Hi All,
What is the Partner Function Structure in Sales Ordere (Item Level)?
(In which structure the partner functions are displays in sales order item level?)
Thanks in advance.

HI Raja,
Thanks for your replay.
I did the same thing what ever u said, but the thing is while doing debugging the values are not showing in that structure. Like header and item data will available in KOMK and KOMP structurs, not in screen field strucuture. I am thinking that there may be some structure for partner functions like KOMP, KOMK.
Thanks

Create directly an IDOC for a sales orders

HI,
I would like to know if it exists a program to create an output IDOC for a sales order directly as does the program
RBDSEMAT for materail / product.
With RBDSEMAT we give the product's numeber the message type and the logical system.
Of course before was customizing all the ALE flow.
But for sales orders (VA02 / VA01) I don't find any program which allow us to have the same function.
Does this program / function exist? I want juste to give the sales order number the logical system and the message type.
Thanks you
Henri

Funtion Module IDOC_OUTPUT_ORDRSP is used by standard SAP when output determination is used. I think you can populate the control record and use this function module directly. This will return the IDoc data, but the IDoc will not exist on the Database.

What's the name of FM for getting Sales Order Header / Item Status info

Hello All:
Do you know what's the name of Function Module for getting Sales Order Header / Item Status Overview ? Any sample code will be very much appreciated.
Basically, I am trying to create a Webpage where user can enter the Sales Order document number and will return the Sales Order: Status Overview.
Thanks,
Dipankar Biswas

Thanks everybody ! Appreciate for your prompt response. I was also looking for some sample code, and I did find some on. And here is one. I still have to try the code, but here is for all your reference:
*& Report ZBAPI_SALESORDER_GETSTATUS *
*& Read and Display the Sales Order Items and Status of the Order *
REPORT zbapi_salesorder_getstatus NO STANDARD PAGE HEADING LINE-SIZE 200 LINE-COUNT 33(3).
TABLES: vbap. "Sales Document Item Data.
DATA: wa_bapireturn TYPE bapireturn,
wa_bapisdstat TYPE bapisdstat,
it_bapisdstat LIKE STANDARD TABLE OF wa_bapisdstat.
TYPES: BEGIN OF ty_mat_name,
matnr TYPE makt-matnr,
maktx TYPE makt-maktx,
END OF ty_mat_name.
DATA: wa_mat_name TYPE ty_mat_name,
it_mat_name LIKE TABLE OF wa_mat_name WITH KEY matnr .
PARAMETERS: p_vbeln LIKE vbap-vbeln DEFAULT 5573.
START-OF-SELECTION.
SELECT matnr maktx FROM makt INTO TABLE it_mat_name.
CALL FUNCTION 'BAPI_SALESORDER_GETSTATUS'
EXPORTING
salesdocument = p_vbeln
IMPORTING
return = wa_bapireturn
TABLES
statusinfo = it_bapisdstat.
IF wa_bapireturn IS INITIAL. " Successful Execution.
WRITE: / 'Document No: ' COLOR 1, 20 'PO Number : ', 40 'Status' , 50 'Delv.Stat',60 'Item No', 80 'Material', 90 'Material Description', 130 'Net Price' COLOR 2.
ULINE.
LOOP AT it_bapisdstat INTO wa_bapisdstat.
WRITE: / wa_bapisdstat-doc_number. " Sales Document Number.
READ TABLE it_mat_name INTO wa_mat_name WITH KEY matnr = wa_bapisdstat-material.
WRITE: /20 wa_bapisdstat-purch_no, " Customer Purchase Order Number
40 wa_bapisdstat-prc_stat_h, " Processing Status
50 wa_bapisdstat-dlv_stat_h, " Delivery Status
60 wa_bapisdstat-itm_number, " Item Number
80 wa_bapisdstat-material, " Material
90 wa_mat_name-maktx, " Material Description
130(10) wa_bapisdstat-net_price. " Net Price
CLEAR wa_bapisdstat.
ENDLOOP.
REFRESH it_bapisdstat[].
ELSE.
WRITE: wa_bapireturn-message.
ENDIF.

BADI for sales order header level data

Is there any BADI which will give me the sales order header level data? I need net price of the sales order in header level. KOMK structure does not contains the net price value.

My requirement is:
I am writing a pricing routine for calculating ZSMR condition value in sales order header level. The formula for calculating is (NET PRICE / NET SALES COST) / NET PRICE.
I can't use VBAK because I have not saved the sales order yet. I need to use some structure.
Which structure contains the net price of the sales order in header level. KOMK structure does not contains the net price value.
Edited by: dossgs on May 21, 2010 4:08 PM

How to add a new tab to sales order header level

Hello Experts,
I have to add a new tab 'Billing Plan' at sales order header level.
As per my functional person, If I modify TVAK-FPART field with some value than tab will be come.
I tried to modify TVAK-FPART field in debug mode and was able to see the tab, BUT when I again came back to
VA03/VA03 transaction then that tab was not there.
Pls help me to resolve this problem..
Rocks!!

Hello Rock,
I have the similar requirement, to add a new tab at the sales order item level. there are already two customer tabs but i dont want to use them, instead i want to use a new tab to be created. i searched BADIs but the BADI BADI_SD_TAB_CUST_I is for SAP Internal use only.
Kindly suggest whay way you used to create a new tab. thanks in advance.
Reagrds
Sachin

Complete delivery indicator in the sales order header level

my order quantity is 10 and having the complete delivery indicator in the header level
Complete delivery indicator in the sales order header level
when i am doing the partial delivery i got below error
Delivery quantity is less than quantity of 10 PC assigned to batches
this is warehouse linked.
Please let us know how to do the partial delivery.
when i click on the bacth icon to reduce the quantity it is greayed out.
is there any posiblity to reduce the quantity in the transfer order
Please do the needfull
thanks
Raju.

Hi
Usually this Complete delivery indicator flow from Customer master data. you need to change this data in Customer Master
Sales Area Tab under Shipping view Remove the Complete delivery indicator, also in Partial delivery per item keep the field Blank ( Partial deliveries allowed )
I hope this will solve your issue
Award if useful to you

Partner function change in sales order

Hi,
I have partner function ZR (sales employee) defined for customer master. I enter a particular employee no 100 in the customer master. and subsequnetly the partner function ZR gets copied into a contract with value 100.
now another user is trying to change the value to 200 from 100, but the system is giving a message that partner function ZR not defned for partner procedure.
If i go to partner determination for sales order , then i see that there is no partner function ZR assigned for a patner procedure.
my question is that the above is happening due to lack of master data for emploee id 200 from HR module or is it that we have to maitain partner function ZR for sales order (I have seen that ZR is not maintained for sales order. ).Iam assuming that for contracts aslo, the config needs to be done in parnter determination for sales order.
regards
sachin

Hi Sachin,
I assume that you have configured the partner functions for Customer master including ZR, also enabled ZR for the partner procedure applicable for the sales document type.
If this is done, then the partner function ZR should be available for entry in the sales order.
Now the problem is that
You shoudl have assigned the partner function ZR to some account group, while creating this partner function, and customer 100 shoudl have belonged to this account group.
However the customer 200 whom you want to update as the new ZR doesnt belong to this account group.
You can use only those customers belonging to the account group which is linked to the partner function ZR as sales employees.
So find out the customers belonging to the account group, which is linked to the partner function ZR. Make sure their masterdata is correct for the sales area which you wnat to use. If all the things satisfy, then you should be able to use them as ZR partner in your sales document.
This should solve your problem.
Pls reward if this helps you to solve the problem

Multiple PR's for single sale order

Hello all,
We are having Thrid party Scenario.For the sale order with multiple line items,single PR is created.
Is it possible to create PR for each line item in slae order?
Regards,
Shyam

I dont think that you can influence this. Why would you need individual PRs? you can process PR items individually.

How to create a single delivery for two sales orders?

Hi Experts,
I need to create one delivery for two sales orders. But it fails.
The route, shipping point, ship to party are same for both orders but INCOTERMS are different.
Delivery date, Good issue date, loading date,material availability date, transportation planning date for 1st order is 12/07/11 and for second order is 14/07/11.
I have created delivery on 14/07/2011 but the delivery is created for 1st order only, the second order is missing in the delivery.
It not happened because of incoterms.? different dates
Kindly help regarding this.
Thanks
Raghu

Prerequisite for Grouped delivery
1. Header data should be same like Inco terms,Payment terms
Go to VL10A
Enter the sales order Numbers and execute
Select the sales order Nos for the group delivery and select "Background" Tab in Tool Menu Bar
If delivery is created coloured line items will get generated
Check the log for delivery docuements
Check and confirm
Senthils

How to make Delivery block at Sales Order Header level for specific materia

Hi,
My client want to create a delivery block EDI order at the Order Header level for specific materials
How can we achieve this.

Dear Varada rajan
Go to material master, select "Sales: sales org.1" view and assign "01" against the field "DChain-spec. status" and save. By assigning, for a particular sales area, you can block that material.
Now go to OVSU select 01 and assign "B" against the field "Block delivery".
Now create a sale order and post the outcome.
thanks
G. Lakshmipathi

WBS Element ( Billing element ) assignment at sales order header level

HI,
There is provision of assign WBS Element at sales order header as well as item level , If Project WBS Element is assigned for each line item delivery and stock updating is happening from the project, But WBSE will assign at sales order Header system will not allowing to create project delivery( moment type 601Q), and stock updation ftom project.
Please let me know how this will happen ,
Regards,
Gangi
Edited by: Gangi Reddy Botchu on Jul 7, 2008 4:50 PM

SPRO - SD - Billing - Billing Plan - the first 5 config nodes (Define Billing Plan types / Define Date descriptions / Assign Date categories / Maintain Date Proposals / Assign Billing Plan types to Sales Doc types) are applicable to you.
this is pretty tranparent for a reference.
What else is required?

Creating multiple partner function for a sale order @ header level

Similar Messages

Maybe you are looking for