Creating new goods movement

Hi everybody !
I should create a new goods movement and link it
to a sales order delivery using WS_DELIVERY_UPDATE_2.
Using this function infact I can't set number or movement.
Thanks
Alice

Hi
  Check transaction "OMJJ"
  Reward points if it helps.
Regards
Karan

Similar Messages

  • New goods movement

    Hi everybody !
    I should create a new goods movement and link it
    to a sales order delivery using WS_DELIVERY_UPDATE_2.
    Using this function infact I can't set number or movement.
    Thanks
    Alice

    Could you please elaborate? What kind of "number or movement" are you talking about? Do you mean the movement type (BWART)? Please also specify whether the delivery is WM relevant or not.
    In any case, you might want to take a look at BAPI_GOODSMVT_CREATE instead.

  • How to setup number range for Material Documents created by goods movement

    Hi Experts,
    Good day!
    Would you know what table or transaction code we could setup or configure the number range for Material Documents number created by goods movement?
    Thanks. Have a wonderful day!
    Rockz

    Hi,
    Tcode - OMBT
    Regards,
    Vivek

  • New good movement for deliveries

    Hello,
    usual movement code for delivery good issue is 601.
    my customer would like to distinguish the good issues made for a specific delivery type.
    I need then to create a new movement type for example Z60 in copy of standard 601.
    My question is: how can I make sure that for my good issues made for a specific delivery type will be done with the newly created good movement code???
    Thanks in advance for your very precious help,
    BR,
    KF

    If you want to use new movement type in your delivery, then, you have to assign the new movement type in the schedule line category that gets determined in the sales order.
    a. So, first from SD end, you need to create a new item category (VOV7), item category group and a schedule line category (VOV6). 
    b. Assign Item category group to materail and do the item category determination (VOV4).
    c. Assing the new movement type into schedule line category (VOV6) and then create the new determination for schedule line (VOV5) category.
    So, when you create a sales order, the new item category gets determined which in turn will lead to new schedule line category determination. When you create a delivery the new movement type will be determined.
    You have to get in touch with your MM counterpart to configure the new movement type. It requires a bit of config. You should make sure that right GL accounts are put in while configuring the movement type.
    You can also put in the manual item category in item category determination. But everytime you create a sales order, you will have to change the item cat manually so that all other parameters get redetermined.
    Hope this helps...
    Regards,
    Mukund S

  • New Goods Movement Type for Inventory Manager

    Hi Guys,
    I need to change a goods movement code used on Mobile App Inventory Manager 4.0 to a custom (Z) goods movement code, the fileds are the same so I thought changing the constant will work for this as we do a GoodReceipt with no reference to Purchase nor Production order (gmCode = 501) with a custom, copied from standard, Movement type gmCode = 950 (this is a well known practice on ERP). I have changed only the global constant on my copied IM application, for testing purpose and the local GR was created with gmCode = 950 instead of gmCode = 501, but when I was transmiting in order to create goods movement document on SAP, the application throws an error like: "PostReceiptsSteplet - Goods Movement Impossible with good movement type 950 - Server error". So I would like to know first:
    If is it possible to include or change the standard gmCode for custom gmCode on mobile app Inventory Manager 4.0?
    What would it be the Best Practice to do this? The steps to include a custom movement type, now I know is not only changes on global constants
    I have checked the java doc for this method "PostReceiptsSteplet", and it did not say anything about the constructor .... or how is used... what has inside... what is the condition of execution.... nothing ...
    Please Help... Mark Pe Stephen Streeter Jason Latko Omar Candelaria Manju Venkatesha
    BR,
    Mariana
    Tags edited by: Michael Appleby

    Jason Latko
    If those java source code are so troublesome to request... why should I request them if I won't change the app's base functionality??. Instead of requesting those java source code, the documentation of the java doc should improve, well the documentation in general for this app should improve ... Is only a suggestion ... I'm trying very hard not to ask for those source code, because what Mark Pe  answer me on another post: If I ask for them, a disclamer must be signed because I could change a base functionality... and that's perfectly fine. But if I need to extend a class and add a few field: why do I need to ask for the code instead of checking the documentation and apply the customization needed?
    Now I have some trouble extending a SAPOBJECT, because I don't quite understand the design of how you manage MaterialDocument / MaterialDocumentItem on the app. But I will post this question on another thread
    BR & Always Thankful
    Mariana

  • Best Way to Create a Goods Movement for Goods Receipt & a Stock Transfer?

    This is for an acquisition, so I do not think BAPI_GOODSMVT_CREATE will work because we do not have a doc ref no. We also need to create a Stock Transfer movement.
    Or we call BDC MIGO and BDC M1B1? There must be a better way. We are on 46C.
    I am open to any and all suggestions....Thank-You.

    Hello Tom,
                       Best way is to use the SAP standard BAPI "BAPI_GOODSMVT_CREATE". So that for the long run SAP will support the functionality. If you go with BDC then we don't know what enhancement is going to come in the future??
    Thanks,
    Greetson

  • Create a subsequent Goods Movement for a transfer posting

    Hi Team,
    I have a scenario where the users will create a Good Movement document for transfer posting. The Stock of Material "A" is transferred to stock of Material "B" using the movement types 561 etc. Now the quantity is reduced from unrestricted stock of "A" and posted to "Stock in Transfer/Transit" of "B". The requirement is to create another Goods Movement document immediately after the above transfer posting is completed and use movement type 101 to post the same quantity to unrestricted of "B".
    I tried searching for use exits and could not find a relevant one "After Save" for goods movement online transaction. I found the MB_GOODS_MOVEMENT_UPDATE Badi but don't know how to create another goods movement document while in the update task. I'm concerned that if I call a BAPI or BDC inside the update task, it might conflict with the current transaction (transfer posting). Looking for your guidance.

    Hi Deepali,
    You can use the userexit ' ZXMCBU02 '  to write your own code. This user exit gets triggered for almost all the goods movement transaction.
    There is also a very similar BADI which you can use which gets triggered for every goods movement transaction.
    I would like to know the BADI feel free to let me know. I think the above user exit should server your purpose.
    Hope this is useful for you.
    Cheers
    VJ

  • Hi all truble in goods movement

    hi all
    i want to create a new goodsmovement using bapi FM.  for that i use  "bapi_goodsmvt_create ".
    problem is thats when i am creating the goods movement by using txn mb11 it works and when the same data i pass to the fm in se37 it generates a problem that "Goods movement not possible with mvmt type 201". 
    will u plz help me.
    i have using this data:
    movement type 201
    plant 6101
    storage location 0001
    material 100-100
    quantity  1
    cost center 0000001000

    Hi,
    1) Don't forget to send GOODSMVT_CODE parameter
         GM_Code 01: Goods receipt for purchase order                       
         GM_Code 02: Goods receipt for production order                     
         <b>GM_Code 03: Goods issue </b>                                           
         GM_Code 04: Transfer posting                                       
         GM_Code 05: Other goods receipts                                   
         GM_Code 06: Reversal of goods movements                            
         GM_Code 07: Subsequent adjustment to a subcontract order           
    Regards.
    David

  • Goods Movement - BAPI_GOODSMVT_CREATE - input parameters

    Hi,
    I have to create a goods movement with movement type 343 and 344.
    While using the transaction MB1B (Tranfer Posting), I give the following parameters.
    Header
    1. Document Date              2. Posting Date
    Item
    1. Movement Type              2. Plant                  3. Storage Location
    4. Material                         5. Quantity
    But while using the BAPI for creating the goods movement, it creates material document. But I am neither able to view the document nor see any change in the good movement of the material. The quantity remains same in transaction MMBE.
    I feel that item details given as input to the BAPI needs changes. Can anyone suggest the fields to which each of the above item details needs to be given.
    Thanks.
    Regards,
    Senthil G.

    Hello Senthil,
    Check this sample code
    REPORT ZRICH_0001 .
    * Structures for BAPI
    DATA: GM_HEADER  TYPE BAPI2017_GM_HEAD_01.
    DATA: GM_CODE    TYPE BAPI2017_GM_CODE.
    DATA: GM_HEADRET TYPE BAPI2017_GM_HEAD_RET.
    DATA: GM_ITEM    TYPE TABLE OF
                     BAPI2017_GM_ITEM_CREATE WITH HEADER LINE.
    DATA: GM_RETURN  TYPE BAPIRET2 OCCURS 0 WITH HEADER LINE.
    DATA: GM_RETMTD  TYPE BAPI2017_GM_HEAD_RET-MAT_DOC.
    CLEAR: GM_RETURN, GM_RETMTD. REFRESH GM_RETURN.
    * Setup BAPI header data.
    GM_HEADER-PSTNG_DATE = SY-DATUM.
    GM_HEADER-DOC_DATE   = SY-DATUM.
    GM_CODE-GM_CODE      = '04'.                                " MB1A
    * Write 971 movement to table
    CLEAR GM_ITEM.
    MOVE '412'                 TO GM_ITEM-MOVE_TYPE     .
    MOVE 'Q'                 TO GM_ITEM-SPEC_STOCK.
    MOVE '3800533484'  TO GM_ITEM-MATERIAL.
    MOVE '1'     TO GM_ITEM-ENTRY_QNT.
    *MOVE 'PC'    TO GM_ITEM-ENTRY_UOM.
    MOVE '1060'  TO GM_ITEM-PLANT.
    MOVE '0007'  TO GM_ITEM-STGE_LOC.
    *MOVE '0901'   TO GM_ITEM-MOVE_REAS.
    MOVE 'P203601001' TO GM_ITEM-WBS_ELEM.
    MOVE 'P203601001' TO GM_ITEM-VAL_WBS_ELEM.
    APPEND GM_ITEM.
    * Call goods movement BAPI
    CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
         EXPORTING
              GOODSMVT_HEADER  = GM_HEADER
              GOODSMVT_CODE    = GM_CODE
         IMPORTING
              GOODSMVT_HEADRET = GM_HEADRET
              MATERIALDOCUMENT = GM_RETMTD
         TABLES
              GOODSMVT_ITEM    = GM_ITEM
              RETURN           = GM_RETURN.
    IF NOT GM_RETMTD IS INITIAL.
      COMMIT WORK AND WAIT.
      CALL FUNCTION 'DEQUEUE_ALL'.
    ELSE.
      COMMIT WORK AND WAIT.
      CALL FUNCTION 'DEQUEUE_ALL'.
    ENDIF.
    WRITE:/ GM_RETMTD.
    LOOP AT GM_RETURN.
      WRITE:/ GM_RETURN.
    ENDLOOP.
    " Also after iu call the BAPI use the FM BAPI_TRANSACTION_COMMIT
    If useful reward.
    Vasanth

  • Need help about Post  goods movement with refernece to Inbound delivery

    Hi All,
    I am using  FMs MB_CREATE_GOODS_MOVEMENT and MB_POST_GOODS_MOVEMENT and commit to create a goods movement. I am successfully creating the MM doc and also posting.But still the Inbound delivery is open for GR.Is there any other function module or BAPI that creates GR with reference to Inbound delivery and update the document flow?Or is there any parameter in the above FM that sets the inbound delivery.Kindly provide your guidance on the same.
    Best Regards,
    Sailaja.

    I used BAPI_GOODSMVT_CREATE and it posted the GR successfully and the document flow was updated also.
    You have to use GM_code '01' and give the delivery number / item number w/o PO (if I gave the PO additionally, it also worked).
    If still your document flow is not updated then have a look at OSS note 1050944 and check your config.

  • Goods movement web service

    Hi All,
    can you please let me know what service i can use for creating a goods movement for purchase order.. i want to pass only mandatory fields (very basic)
    Regards
    Anuj

    Hi,
    1)Goods reciept
    2)Goods issue
    3)tranferposting
    4)disply mat.doc
    5)returndelivary
    6)cancel mat doc
    regards,
    sasi

  • Creating a QuickTime movie with the new Canon T5i  camera in iMovie 9.0.9.

    Help needed creating a QuickTime movie with the new Canon T5i  camera in iMovie 9.0.9.  The project is done and looks good...I need help understanding what settings need to be set so I can make a QuickTime movie in the highest quality that would fit the ratio of 16.9 to be sent out to my YouTube page.  I played around with some of the settings and have not come with the right setting for the video.  I want the highest quality with the lowest amount of megabytes…thanks

    I would suggest using SHARE/EXPORT MOVIE and choose 1920x1080 (if your source material supports this).
    That should work well in YouTube.
    If you want to go further with custom QuickTime settings,  here are some that should work, but in my experience, it will be no better than using SHARE/EXPORT MOVIE.
    follow the instructions below to create a .mov video that will work on YouTube:
    In iMovie, select Share > Export Using QuickTime
    Next, you may want to check your Options to verify that the following settings are correct:Video settings
    Compression Type: H.264
    Frame Rate: 30 is preferred. 23.98, 24, 25, 29.97 are also acceptable.
    Data Rate: Automatic
    Key Frames: Automatic
    Frame Reordering: Unchecked
    Audio/Sound settings
    Format: AAC
    Click Show advanced settings and choose Constant Bit Rate as encoding strategy
    Other settings
    Size: Choose the original size of the video
    “Prepare for Internet Streaming”: Fast Start

  • Error In Creating New Movement Type

    Hi,
    To upload the Consignee Stock, we have created a new Movement Type, say Z01 & Z02 copying the Movement Type 701 & 702.
    We are able to upload the Stock using Z01 with correct FI Entry.
    While doing the reversal, the following error is encountered:
    The mvt type in the reference docmt cannot be converted
    Message no. MIGO029
    Diagnosis
    You want to post a goods movement but the movement type that you want to use for the posting has not been maintained completely in the system.
    Possible causes are:
    The movement type is not permitted for this transaction.
    No subsequent movement type has been defined.
    You do not have authorization to post a goods movement using this movement type.
    Procedure
    Check your screen and field values.
    If you do not have sufficient authorization, contact your system administrator.
    If a movement type has not been maintained completely, the missing data must be maintained in Customizing for Inventory Management.
    Make the appropriate settings in Customizing as necessary or inform your system administrator.
    Pls. advise what to do?
    Regards,
    P K Karn

    While exploring the Mov Type 701 & 702, I came to know that 702 is not the REVERSAL of 701 as I normally assume, hence I would be wrong if we think of 702 as reversal for 701.
    Also I came to know that reversal is not possible for the documents created thru Physical Inventory i.e. using Mov Type 701.
    Basis the above observations, I can conclude that I am going on a wrong track.
    But still I am not able to find out the solutions.
    I don't to use 501, as it will generate the FI Entries which I don't want.
    Hoping some quick answers from you people.
    Also would like to request to stop me, if my LOGIC is wrong.
    Regards,

  • 4.2.1 was supposed to fix problems, but it only created new ones. No video on some movies, no audio on others, and can't even play some movies. Can you please provide a means to restore 4.1.1?

    4.2.1 was supposed to fix problems, but it only created new ones. No video on some movies, no audio on others, and can't even play some movies. Can you please provide a means to restore 4.1.1?

    Let me try again, Chenks. I'm a technical person by profession, and so can get deeper into things like this, but I have not attempted to use these methods of communication in the past. I'm trying to get some feedback to Apple on their worsening a product and really messing with existing customer configurations. I'll try to break things up below.
    1. Configuration:
    Existing Apple TV and Mac Mini configuration in place since December 2010.
    Three Apple TVs, one in Family Room for music and movies, one in Master Bedroom for music and movies, the third one in the Living Room for music only.
    I'm using iTunes as library. (Probably an obvious statement, but wanted to mention that.)
    2. Pre 4.2.1
    No problems at any location since configuration finalized and all equipment installed in December.
    Since December, Family Room entertainment equipment was updraded to a new Sony Bravia 3D, and a new Pioneer receiver. The Master Bedroom still has the original Toshiba 32HLC56 TV. That unit has only one HDMI input. I'm using the built-in speakers. This TV/Monitor is about fives years old.
    3. Problem
    I updated the software in two of the Apple TVs to 4.2.1. I updated the Family Room device and the Master Bedroom device. I had not updated the Living Room device.
    After updating to 4.2.1, the Family Room equipment works fine. That's the location with the newer TV and receiver.
    The Master Bedroom has different problems with different movies: e.g. "The Little Mermaid:" video, no audio. "The Lion King:" movie wont start at all.
    Additionally, in the Master Bedroom some movies work fine, other movies start but immediately go into pause mode. Pressing pause button on Apple remote will not initiate start of movie, screen does "flicker" for a moment but movie does not start to play, showing only the last frame that had been streamed.
    4. Not really a problem for me.
    Fortunately for me, I had not updated the Apple TV in the living room so I used it to troubleshoot the problem. Initially I thought it was a defective Apple TV in the Master Bedroom. I took the unit to the Apple Store in town and they exchanged it for me. I brought the replacement Apple TV home but I did not install it immediately.
    While testing the Master Bedroom set up once again to make it was working for our afternoon movie watching, I was again reminded that a software update was available. That message came up because it was the unit I had brought over from the Living Room. I proceeded to update the Apple TV to the new software version (4.2.1).
    As soon as I "updated" the software in the Apple TV to the new 4.2.1, the same problems manifested themselves. At that point I suspected that the problem was with 4.2.1, and not with the hardware.
    I called Apple Support and went through a series of troubleshooting techniques. We tested the Apple TV with the new 4.2.1 installed in it. This is the unit which originially in the Living Room. Under the direction of the Apple TV support technician, I used the Family Room gear and the Master Bedroom gear to try and isolate the problem to hardware or software.
    We eliminated the following as potential problems:
    a. TV speakers in the Master Bedroom
    b. HDMI cable
    c. Ethernet connection
    5: Conclusion:
    Fortunately for me, again, the Apple TV that the Apple Store had given me that morning still had 4.1.1. So I installed that unit in the Master Bedroom and everything started working normal again.
    6. Side note:
    An interesting observation: In early March I copied several movies from the Mac Mini to my iPad and some to my wife's iPad. All movies worked fine on our flight out and while we were away.
    My wife recently (about a week ago) updated the software in her iPad. and now some of the movies that played just fine on her iPad are exhibiting the same problems as the Master Bedroom TV when it is connected to an Apple TV with software 4.2.1.
    Apple has been trying to fix some problems in 4.2 when it released 4.2.1. I make that observation based on recent articles I found on the web. Most likely the Apple engineers were trying to fix things in one place and broke them in another.
    Clear as mud, isn't it?
    7. In closing:
    I'm good to go, I just need to remember not to update the software in the Master Bedroom Apple TV. I want to keep that unit at 4.1.1. It's possible that Apple might come to the realization that they hosed things for some of us. Because I do have three units in my home, I can experiement with the other two units should a "fix" come out. I can then update one of the two devices, connect it to the Master Bedroom TV, and see if the problem was corrected. If not, I stay with 4.1.1. But I'm not convinced that Apple will see this as their problem, it's always easier to point elsewhere.
    Regards,

  • HT204053 I have one apple ID that my entire family has been using.  How do I create new apple ID's for each of us and move the appropriate content to each new ID from the original apple ID now that we all have our own devices?

    I have been using one apple ID for 4 family members.  Up until now it hasn't been a problem but now that we all have our own devices how do I create new apple ID's for each of us and them move the approprioate things from the original apple ID account to the new ones for each of us?

    stuartx4 wrote:
    Thanks Csound1, wish I have seperated everything from the beginning but when your kids are little and start buying music etc it just didn't seem like an issue.
    That has a familiar ring to it

Maybe you are looking for